Design of Hierarchical NiCo@NiCo Layered Double Hydroxide Core–Shell Structured Nanotube Array for High‐Performance Flexible All‐Solid‐State Battery‐Type Supercapacitors

A novel hierarchical nanotube array (NTA) with a massive layered top and discretely separated nanotubes in a core–shell structure, that is, nickel–cobalt metallic core and nickel–cobalt layered double hydroxide shell (Ni?Co@Ni?Co LDH), is grown on carbon fiber cloth (CFC) by template‐assisted electrodeposition for high‐performance supercapacitor application. The synthesized Ni?Co@Ni?Co LDH NTAs/CFC shows high capacitance of 2200 F g^?1 at a current density of 5 A g^?1, while 98.8% of its initial capacitance is retained after 5000 cycles. When the current density is increased from 1 to 20 A g^?1, the capacitance loss is less than 20%, demonstrating excellent rate capability. A highly flexible all‐solid‐state battery‐type supercapacitor is successfully fabricated with Ni?Co LDH NTAs/CFC as the positive electrode and electrospun carbon fibers/CFC as the negative electrode, showing a maximum specific capacitance of 319 F g^?1, a high energy density of 100 W h kg^?1 at 1.5 kW kg^?1, and good cycling stability (98.6% after 3000 cycles). These fascinating electrochemical properties are resulted from the novel structure of electrode materials and synergistic contributions from the two electrodes, showing great potential for energy storage applications.     

Nickel–Cobalt Layered Double Hydroxide Nanosheets for High‐performance Supercapacitor Electrode Materials

A facile and novel one‐step method of growing nickel‐cobalt layered double hydroxide (Ni‐Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants. As pseudocapacitors, the as‐obtained Ni‐Co LDH hybrid film‐based electrodes display a significantly enhanced specific capacitance (2682 F g^?1 at 3 A g^?1, based on active materials) and energy density (77.3 Wh kg^?1 at 623 W kg^?1), compared to most previously reported electrodes based on nickel‐cobalt oxides/hydroxides. Moreover, the asymmetric supercapacitor, with the Ni‐Co LDH hybrid film as the positive electrode material and porous freeze‐dried reduced graphene oxide (RGO) as the negative electrode material, exhibits an ultrahigh energy density (188 Wh kg^?1) at an average power density of 1499 W kg^?1 based on the mass of active material, which greatly exceeds the energy densities of most previously reported nickel or cobalt oxide/hydroxide‐based asymmetric supercapacitors.     

Design of Hierarchical Ni?Co@Ni?Co Layered Double Hydroxide Core–Shell Structured Nanotube Array for High‐Performance Flexible All‐Solid‐State Battery‐Type Supercapacitors

A novel hierarchical nanotube array (NTA) with a massive layered top and discretely separated nanotubes in a core–shell structure, that is, nickel–cobalt metallic core and nickel–cobalt layered double hydroxide shell (Ni? Co@Ni? Co LDH), is grown on carbon fiber cloth (CFC) by template‐assisted electrodeposition for high‐performance supercapacitor application. The synthesized Ni? Co@Ni? Co LDH NTAs/CFC shows high capacitance of 2200 F g^?1 at a current density of 5 A g^?1, while 98.8% of its initial capacitance is retained after 5000 cycles. When the current density is increased from 1 to 20 A g^?1, the capacitance loss is less than 20%, demonstrating excellent rate capability. A highly flexible all‐solid‐state battery‐type supercapacitor is successfully fabricated with Ni? Co LDH NTAs/CFC as the positive electrode and electrospun carbon fibers/CFC as the negative electrode, showing a maximum specific capacitance of 319 F g^?1, a high energy density of 100 W h kg^?1 at 1.5 kW kg^?1, and good cycling stability (98.6% after 3000 cycles). These fascinating electrochemical properties are resulted from the novel structure of electrode materials and synergistic contributions from the two electrodes, showing great potential for energy storage applications.     

Cactus‐Like NiCoP/NiCo‐OH 3D Architecture with Tunable Composition for High‐Performance Electrochemical Capacitors

To effectively enhance the energy density and overall performance of electrochemical capacitors (ECs), a new strategy is demonstrated to increase both the intrinsic activity of the reaction sites and their density. Herein, nickel cobalt phosphides (NiCoP) with high activity and nickel cobalt hydroxides (NiCo‐OH) with good stability are purposely combined in a hierarchical cactus‐like structure. The hierarchical electrode integrates the advantages of 1D nanospines for effective charge transport, 2D nanoflakes for mechanical stability, and 3D carbon cloth substrate for flexibility. The NiCoP/NiCo‐OH 3D electrode delivers a high specific capacitance of ≈1100 F g^?1, which is around seven times higher than that of bare NiCo‐OH. It also possesses ≈90% capacitance retention after 1000 charge–discharge cycles. An asymmetric supercapacitor composed of NiCoP/NiCo‐OH cathode and metal–organic framework‐derived porous carbon anode achieves a specific capacitance of ≈100 F g^?1, high energy density of ≈34 Wh kg^?1, and excellent cycling stability. The cactus‐like NiCoP/NiCo‐OH 3D electrode presents a great potential for ECs and is promising for other functional applications such as catalysts and batteries.     

Hierarchical Self‐assembly of Microscale Cog‐like Superstructures for Enhanced Performance in Lithium‐Ion Batteries

Assembling complex nanostructures on functional substrates such as electrodes promises new multi‐functional interfaces with synergetic properties capable of integration into larger‐scale devices. Here, we report a microemulsion‐mediated process for the preparation of CuO/Cu electrodes comprising a surface layer of a densely packed array of unusual cog‐shaped CuO microparticles with hierarchical nanofilament‐based superstructure and enhanced electrochemical performance in lithium‐ion batteries. The CuO particles are produced by thermolysis of Cu(OH)₂ micro‐cog precursors that spontaneously assemble on the copper substrate when the metal foil is treated with a reactive oil‐based microemulsion containing nanometer‐scale aqueous droplets. The formation of the hierarchical superstructure improves the coulombic efficiency, specific capacity, and cycling performance compared with anodes based on CuO nanorods or polymer‐blended commercial CuO/C black powders, and the values for the initial discharge capacity (1052 mA h g^?1) and reversible capacity (810 m A h g^?1) are higher than most copper oxide materials used in lithium‐ion batteries. The results indicate that a fabrication strategy based on self‐assembly within confined reaction media, rather than direct synthesis in bulk solution, offers a new approach to the design of electrode surface structures for potential development in a wide range of materials applications.     

Ultrathin Nickel–Cobalt Phosphate 2D Nanosheets for Electrochemical Energy Storage under Aqueous/Solid‐State Electrolyte

2D materials are ideal for constructing flexible electrochemical energy storage devices due to their great advantages of flexibility, thinness, and transparency. Here, a simple one‐step hydrothermal process is proposed for the synthesis of nickel–cobalt phosphate 2D nanosheets, and the structural influence on the pseudocapacitive performance of the obtained nickel–cobalt phosphate is investigated via electrochemical measurement. It is found that the ultrathin nickel–cobalt phosphate 2D nanosheets with an Ni/Co ratio of 4:5 show the best electrochemical performance for energy storage, and the maximum specific capacitance up to 1132.5 F g^?1. More importantly, an aqueous and solid‐state flexible electrochemical energy storage device has been assembled. The aqueous device shows a high energy density of 32.5 Wh kg^?1 at a power density of 0.6 kW kg^?1, and the solid‐state device shows a high energy density of 35.8 Wh kg^?1 at a power density of 0.7 kW kg^?1. These excellent performances confirm that the nickel–cobalt phosphate 2D nanosheets are promising materials for applications in electrochemical energy storage devices.     

Fabrication of Oxygen‐Vacancy Abundant NiMn‐Layered Double Hydroxides for Ultrahigh Capacity Supercapacitors

The rational design of advanced structures consisting of multiple components with excellent electrochemical capacitive properties is one of the crucial hindrances to be overcome for high‐performance supercapacitors (SCs). Herein, a superfast and facile synthesis of flower‐like NiMn‐layered double hydroxides (NiMn‐LDH) with high SC performance using an electrodeposition process on nickel foam is proposed. Oxygen vacancies are then modulated via mild H₂O₂ treatment for the first time, significantly promoting the electrochemical energy storage performance. The oxygen‐vacancy abundant NiMn‐LDH (Ov‐LDH) reaches a maximum specific capacity of 1183 C g^?1 at the current density of 1 A g^?1 and retains a high capacity retention of 835 C g^?1 even at a current density of up to 10 A g^?1. Furthermore, the assembled asymmetric SC device achieves a high specific energy density of 46.7 Wh kg^?1 at a power density of 1.7 kW kg^?1. Oxygen vacancies are proven to play a vital role in the improvement of electrochemistry performance of LDH based on experimental and theoretical studies. This vacancy engineering strategy provides a new insight into SC active materials and should be beneficial for the design of the next generation of energy storage devices.     

Hierarchical NiMn Layered Double Hydroxide/Carbon Nanotubes Architecture with Superb Energy Density for Flexible Supercapacitors

A hierarchical nanostructure composed of NiMn‐layered double hydroxide (NiMn‐LDH) microcrystals grafted on carbon nanotube (CNT) backbone is constructed by an in situ growth route, which exhibits superior supercapacitive performance. The resulting composite material (NiMn‐LDH/CNT) displays a three‐dimensional architecture with tunable Ni/Mn ratio, well‐defined core‐shell configuration, and enlarged surface area. An electrochemical investigation shows that the Ni₃Mn₁‐LDH/CNT electrode is rather active, which delivers a maximum specific capacitance of 2960 F g^–1 (at 1.5 A g^–1), excellent rate capability (79.5% retention at 30 A g^–1), and cyclic stability. Moreover, an all‐solid‐state asymmetric supercapacitor (SC) with good flexibility is fabricated by using the NiMn‐LDH/CNT film and reduced graphene oxide (RGO)/CNT film as the positive and negative electrode, respectively, exhibiting a wide cell voltage of 1.7 V and largely enhanced energy density up to 88.3 Wh kg^–1 (based on the total weight of the device). By virtue of the high‐capacity of pseudocapacitive hydroxides and desirable conductivity of carbon‐based materials, the monolithic design demonstrated in this work provides a promising approach for the development of flexible energy storage systems.     

Understanding the Charge Storage Mechanism to Achieve High Capacity and Fast Ion Storage in Sodium‐Ion Capacitor Anodes by Using Electrospun Nitrogen‐Doped Carbon Fibers

Microporous nitrogen‐rich carbon fibers (HAT‐CNFs) are produced by electrospinning a mixture of hexaazatriphenylene‐hexacarbonitrile (HAT‐CN) and polyvinylpyrrolidone and subsequent thermal condensation. Bonding motives, electronic structure, content of nitrogen heteroatoms, porosity, and degree of carbon stacking can be controlled by the condensation temperature due to the use of the HAT‐CN with predefined nitrogen binding motives. The HAT‐CNFs show remarkable reversible capacities (395 mAh g^?1 at 0.1 A g^?1) and rate capabilities (106 mAh g^?1 at 10 A g^?1) as an anode material for sodium storage, resulting from the abundant heteroatoms, enhanced electrical conductivity, and rapid charge carrier transport in the nanoporous structure of the 1D fibers. HAT‐CNFs also serve as a series of model compounds for the investigation of the contribution of sodium storage by intercalation and reversible binding on nitrogen sites at different rates. There is an increasing contribution of intercalation to the charge storage with increasing condensation temperature which becomes less active at high rates. A hybrid sodium‐ion capacitor full cell combining HAT‐CNF as the anode and salt‐templated porous carbon as the cathode provides remarkable performance in the voltage range of 0.5–4.0 V (95 Wh kg^?1 at 0.19 kW kg^?1 and 18 Wh kg^?1 at 13 kW kg^?1).     

Highly Connected Silicon–Copper Alloy Mixture Nanotubes as High‐Rate and Durable Anode Materials for Lithium‐Ion Batteries

Seeking high‐capacity, high‐rate, and durable anode materials for lithium‐ion batteries (LIBs) has been a crucial aspect to promote the use of electric vehicles and other portable electronics. Here, a novel alloy‐forming approach to convert amorphous Si (a‐Si)‐coated copper oxide (CuO) core–shell nanowires (NWs) into hollow and highly interconnected Si–Cu alloy (mixture) nanotubes is reported. Upon a simple H₂ annealing, the CuO cores are reduced and diffused out to alloy with the a‐Si shell, producing highly interconnected hollow Si–Cu alloy nanotubes, which can serve as high‐capacity and self‐conductive anode structures with robust mechanical support. A high specific capacity of 1010 mAh g^?1 (or 780 mAh g^?1) has been achieved after 1000 cycles at 3.4 A g^?1 (or 20 A g^?1), with a capacity retention rate of ≈84% (≈88%), without the use of any binder or conductive agent. Remarkably, they can survive an extremely fast charging rate at 70 A g^?1 for 35 runs (corresponding to one full cycle in 30 s) and recover 88% capacity. This novel alloy‐nanotube structure could represent an ideal candidate to fulfill the true potential of Si‐loaded LIB applications.     

Lithiation‐Induced Vacancy Engineering of Co3O4 with Improved Faradic Reactivity for High‐Performance Supercapacitor

Transition metal oxides are promising electrode candidates for supercapacitor because of their low cost, high theoretical capacity, and good reversibility. However, intrinsically poor electrical conductivity and sluggish reaction kinetics of these oxides normally lead to low specific capacity and slow rate capability of the devices. Herein, a commonly used cobalt oxide is used as an example to demonstrate that lithiation process as a new strategy to enhance its electrochemical performance for supercapacitor application. Detailed characterization reveals that electrochemical lithiation of Co₃O₄ crystal reduces the coordination of the Co? O band, leading to substantially increased oxygen vacancies (octahedral Co²⁺ sites). These vacancies further trigger the formation of a new electronic state in the bandgap, resulting in remarkably improved electrical conductivity and accelerated faradic reactions. The lithiated Co₃O₄ exhibits a noticeably enhanced specific capacity of 260 mAh g^?1 at 1 A g^?1, approximately fourfold enhancement compared to that of pristine Co₃O₄ (66 mAh g^?1). The hybrid supercapacitor assembled with lithiated Co₃O₄//N‐doped activated carbon achieves high energy densities in a broad range of power densities, e.g., 76.7 Wh kg^?1 at 0.29 kW kg^?1, 46.9 Wh kg^?1 at a high power density of 18.7 kW kg^?1, outperforming most of the reported hybrid supercapacitors.     

Molecular Design of Mesoporous NiCo2O4 and NiCo2S4 with Sub‐Micrometer‐Polyhedron Architectures for Efficient Pseudocapacitive Energy Storage

Spinel‐type NiCo₂O₄ (NCO) and NiCo₂S₄ (NCS) polyhedron architectures with sizes of 500–600 nm and rich mesopores with diameters of 1–2 nm are prepared facilely by the molecular design of Ni and Co into polyhedron‐shaped zeolitic imidazolate frameworks as solid precursors. Both as‐prepared NCO and NCS nanostructures exhibit excellent pseudocapacitance and stability as electrodes in supercapacitors. In particular, the exchange of O^2? in the lattice of NCO with S^2? obviously improves the electrochemical performance. NCS shows a highly attractive capacitance of 1296 F g^?1 at a current density of 1 A g^?1, ultrahigh rate capability with 93.2% capacitance retention at 10 A g^?1, and excellent cycling stability with a capacitance retention of 94.5% after cycling at 1 A g^?1 for 6000 times. The asymmetric supercapacitor with an NCS negative electrode and an active carbon positive electrode delivers a very attractive energy density of 44.8 Wh kg^?1 at power density 794.5 W kg^?1, and a favorable energy density of 37.7 Wh kg^?1 is still achieved at a high power density of 7981.1 W kg^?1. The specific mesoporous polyhedron architecture contributes significantly to the outstanding electrochemical performances of both NCO and NCS for capacitive energy storage.     

Molecular‐Scale Hybridization of Clay Monolayers and Conducting Polymer for Thin‐Film Supercapacitors

Development of electrode materials with well‐defined architectures is a fruitful and profitable approach for achieving highly‐efficient energy storage systems. A molecular‐scale hybrid system is presented based on the self‐assembly of CoNi‐layered double hydroxide (CoNi‐LDH) monolayers and the conducting polymer (poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate), denoted as PEDOT:PSS) into an alternating‐layer superlattice. Owing to the homogeneous interface and intimate interaction, the resulting CoNi‐LDH/PEDOT:PSS hybrid materials possess a simultaneous enhancement in ion and charge‐carrier transport and exhibit improved capacitive properties with a high specific capacitance (960 F g^–1 at 2 A g^–1) and excellent rate capability (83.7% retention at 30 A g^–1). In addition, an in‐plane supercapacitor device with an interdigital design is fabricated based on a CoNi‐LDH/PEDOT:PSS thin film, delivering a significantly enhanced energy and power output (an energy density of 46.1 Wh kg^–1 at 11.9 kW kg^–1). Its application in miniaturized devices is further demonstrated by successfully driving a photodetector. These characteristics demonstrate that the molecular‐scale assembly of LDH monolayers and the conducting polymer is promising for energy storage and conversion applications in miniaturized electronics.     

In Situ Preparation of Sandwich MoO3/C Hybrid Nanostructures for High‐Rate and Ultralong‐Life Supercapacitors

This work presents a design of sandwich MoO₃/C hybrid nanostructure via calcination of the dodecylamine‐intercalated layered α‐MoO₃, leading to the in situ production of the interlayered graphene layer. The sample with a high degree of graphitization of graphene layer and more interlayered void region exhibits the most outstanding energy storage performance. The obtained material is capable of delivering a high specific capacitance of 331 F g^?1 at a current density of 1 A g^?1 and retained 71% capacitance at 10 A g^?1. In addition, nearly no discharge capacity decay between 1000 and 10 000 continuous charge–discharge cycles is observed at a high current density of 10 A g^?1, indicating an excellent specific capacitance retention ability. The exceptional rate capability endows the electrode with a high energy density of 41.2 W h kg^?1 and a high power density of 12.0 kW kg^?1 simultaneously. The excellent performance is attributed to the sandwich hybrid nanostructure of MoO₃/C with broad ion diffusion pathway, low charge‐transfer resistance, and robust structure at high current density for long‐time cycling. The present work provides an insight into the fabrication of novel electrode materials with both enhanced rate capability and cyclability for potential use in supercapacitor and other energy storage devices.     

In Situ Formation of Copper‐Based Hosts Embedded within 3D N‐Doped Hierarchically Porous Carbon Networks for Ultralong Cycle Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are promising energy storage systems due to their large theoretical energy density of 2600 Wh kg^?1 and cost effectiveness. However, the severe shuttle effect of soluble lithium polysulfide intermediates (LiPSs) and sluggish redox kinetics during the cycling process cause low sulfur utilization, rapid capacity fading, and a low coulombic efficiency. Here, a 3D copper, nitrogen co‐doped hierarchically porous graphitic carbon network developed through a freeze‐drying method (denoted as 3D Cu@NC‐F) is prepared, and it possesses strong chemical absorption and electrocatalytic conversion activity for LiPSs as highly efficient sulfur host materials in Li–S batteries. The porous carbon network consisting of 2D cross‐linked ultrathin carbon nanosheets provides void space to accommodate volumetric expansion upon lithiation, while the Cu, N‐doping effect plays a critical role for the confinement of polysulfides through chemical bonding. In addition, after sulfuration of Cu@NC‐F network, the in situ grown copper sulfide (Cu_xS) embedded within Cu_xS@NC/S‐F composite catalyzes LiPSs conversion during reversible cycling, resulting in low polarization and fast redox reaction kinetics. At a current density of 0.1 C, the Cu_xS@NC/S‐F composites' electrode exhibits an initial capacity of 1432 mAh g^?1 and maintains 1169 mAh g^?1 after 120 cycles, with a coulombic efficiency of nearly 100%.     

A Continuous Carbon Nitride Polyhedron Assembly for High‐Performance Flexible Supercapacitors

Flexible supercapacitors with high power density, flexibility, and durability have shown enormous potential for smart electronics. Here, a continuous graphitic carbon nitride polyhedron assembly for flexible supercapacitor that is prepared by pyrolysis of carbon nanotubes wired zeolitic imidazolate framework‐8 (ZIF‐8) composites under nitrogen is reported. It exhibits a high specific capacitance of 426 F g^?1 at current density of 1 A g^?1 in 1 m H₂SO₄ and excellent stability over 10 000 cycles. The remarkable performance results from the continuous hierarchical structure with average pore size of 2.5 nm, high nitrogen‐doping level (17.82%), and large specific surface area (920 m² g^?1). Furthermore, a flexible supercapacitor is developed by constructing the assembly with interpenetrating polymer network electrolyte. Stemming from the synergistic effect of high‐performance electrode and highly ion‐conductive electrolyte, superior energy density of 59.40 Wh kg^?1 at 1 A g^?1 is achieved. The device maintains a stable energy supply under cyclic deformations, showing wide application in flexible and even wearable conditions. The work paves a new way for designing pliable electrode with excellent electronic and mechanic property for long‐lived flexible energy storage devices.     

All‐Solid‐State Asymmetric Supercapacitors with Metal Selenides Electrodes and Ionic Conductive Composites Electrolytes

All‐solid‐state flexible asymmetric supercapacitors (ASCs) are developed by utilization of graphene nanoribbon (GNR)/Co_0.85Se composites as the positive electrode, GNR/Bi₂Se₃ composites as the negative electrode, and polymer‐grafted‐graphene oxide membranes as solid‐state electrolytes. Both GNR/Co_0.85Se and GNR/Bi₂Se₃ composite electrodes are developed by a facile one‐step hydrothermal growth method from graphene oxide nanoribbons as the nucleation framework. The GNR/Co_0.85Se composite electrode exhibits a specific capacity of 76.4 mAh g^?1 at a current density of 1 A g^?1 and the GNR/Bi₂Se₃ composite electrode exhibits a specific capacity of 100.2 mAh g^?1 at a current density of 0.5 A g^?1. Moreover, the stretchable membrane solid‐state electrolytes exhibit superior ionic conductivity of 108.7 mS cm^?1. As a result, the flexible ASCs demonstrate an operating voltage of 1.6 V, an energy density of 30.9 Wh kg^?1 at the power density of 559 W kg^?1, and excellent cycling stability with 89% capacitance retention after 5000 cycles. All these results demonstrate that this study provides a simple, scalable, and efficient approach to fabricate high performance flexible all‐solid‐state ASCs for energy storage.     

3D Hierarchical Co3O4 Twin‐Spheres with an Urchin‐Like Structure: Large‐Scale Synthesis,Multistep‐Splitting Growth,and Electrochemical Pseudocapacitors

Novel, 3D hierarchical Co₃O₄ twin‐spheres with an urchin‐like structure are produced successfully on the large scale for the first time by a solvothermal synthesis of cobalt carbonate hydroxide hydrate, Co(CO₃)_0.5(OH)·0.11H₂O, and its subsequent calcination. The morphology of the precursor, which dominates the structure of the final product, evolves from nanorods to sheaf‐like bundles, to flower‐like structures, to dumbbell‐like particles, and eventually to twin‐spheres, accompanying a prolonged reaction time. A multistep‐splitting growth mechanism is proposed to understand the formation of the 3D hierarchical twin‐spheres of the precursor, based on the time effect on the morphologies of the precursor. The 3D hierarchical Co₃O₄ twin‐spheres are further used as electrode materials to fabricate supercapacitors with high specific capacitances of 781, 754, 700, 670, and 611 F g^?1 at current densities of 0.5, 1, 2, 4, and 8 A g^?1, respectively. The devices also show high charge‐discharge reversibility with an efficiency of 97.8% after cycling 1000 times at a current density of 4 A g^?1.     

Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

High energy density, durability, and flexibility of supercapacitors are required urgently for the next generation of wearable and portable electronic devices. Herein, a novel strategy is introduced to boost the energy density of flexible soild‐state supercapacitors via rational design of hierarchically graphene nanocomposite (GNC) electrode material and employing an ionic liquid gel polymer electrolyte. The hierarchical graphene nanocomposite consisting of graphene and polyaniline‐derived carbon is synthesized as an electrode material via a scalable process. The meso/microporous graphene nanocomposites exhibit a high specific capacitance of 176 F g^?1 at 0.5 A g^?1 in the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) with a wide voltage window of 3.5 V, good rate capability of 80.7% in the range of 0.5–10 A g^?1 and excellent stability over 10 000 cycles, which is attributed to the superior conductivity (7246 S m^?1), and quite large specific surface area (2416 m² g^?1) as well as hierarchical meso/micropores distribution of the electrode materials. Furthermore, flexible solid‐state supercapacitor devices based on the GNC electrodes and gel polymer electrolyte film are assembled, which offer high specific capacitance of 180 F g^?1 at 1 A g^?1, large energy density of 75 Wh Kg^?1, and remarkable flexible performance under consecutive bending conditions.     

Kinetics Enhanced Nitrogen‐Doped Hierarchical Porous Hollow Carbon Spheres Boosting Advanced Potassium‐Ion Hybrid Capacitors

Potassium‐ion hybrid capacitors (PIHCs) shrewdly combine a battery‐type anode and a capacitor‐type cathode, exhibiting an energy density close to that of potassium ion batteries and a comparable power density of supercapacitors. However, the rosy scenario is compromised by the sluggish kinetics in the PIHCs device. Herein, the kinetics enhanced nitrogen‐doped hierarchical porous hollow carbon spheres (NHCS) are synthesized and successfully applied to PIHCs. As for the K half‐cell, NHCS anchored with sodium alginate delivers excellent electrochemical performance. Further evaluation shows that the binder can significantly affect the potassium storage performance of NHCS by adjusting the coatability and ionic conductivity of the NHCS anode. Moreover, kinetic analysis and density functional theory calculations reveal the origin of the superior electrochemical properties of NHCS. As expected, an advanced PIHC device is assembled with a NHCS anode and an activated NHCS cathode, demonstrating an exceptionally high energy/power density (114.2 Wh kg^?1 and 8203 W kg^?1), along with a long‐life capability. The successful construction of high‐performance PIHCs in this work opens a new avenue for the development and application of PIHCs in the future.