Direct Observation of Ferroelectric Domain Walls in LiNbO3: Wall‐Meanders,Kinks, and Local Electric Charges

Direct observations of the ferroelectric domain boundaries in LiNbO₃ are performed using high‐resolution high‐angle annular dark field scanning transmission electron microscopy imaging, revealing a very narrow width of the domain wall between the 180° domains. The domain walls demonstrate local side‐way meandering, which results in inclinations even when the overall wall orientation follows the ferroelectric polarization. These local meanders contain kinks with “head‐to‐head” and “tail‐to‐tail” dipolar configurations and are therefore locally charged. The charged meanders are confined to a few cation layers along the polarization direction and are separated by longer stretches of straight domain walls.     

Ultra‐Flexible Boron‐Oxygen 3D Solid‐State Networks

The existence of ultra‐flexible low‐energy forms of boron oxides (B₂O₃ and BO) is demonstrated, in particular structures in which B₃O₃ or B₄O₂ six‐membered rings are linked by single B‐O‐B bridges. The minima in the energy landscapes are remarkably broad; the variation in the internal energies is very small over a very large range of volumes. Such volume changes may even exceed 200%. This remarkable behavior is attributed predominantly to the pronounced angular flexibility of the B‐O‐B bridges linking the rings, which is unusual for a covalent bond. At larger volumes, the structures are nanoporous; the pores collapse upon compression with negligible change in energy, making these suitable as guest‐host materials. In marked contrast, in other materials where low density frameworks have been reported or predicted, such low‐density phases are considerably higher in energy. The flexibility of the structures also offers a resolution of the long‐standing controversy reconciling the structure and density of vitreous B₂O₃.     

Current‐Induced Restructuring and Chemical Modification of N‐Doped Multi‐walled Carbon Nanotubes

Multi‐walled carbon nanotubes (MWCNTs) have long been anticipated as candidates for electrical components in an increasingly miniaturized electronics industry due to their inherent electrical properties. It is possible to manipulate and control these properties by introducing dopants such as N, B, and P. Although some current‐induced structural changes in MWCNTs have been observed, no systematic study has been carried out to explore the correlation of changes in the internal structure with the electronic behavior of doped‐MWCNTs in terms of the current densities present. In situ transmission electron microscopy (TEM) investigations are presented here of individual, N‐doped MWNCT (N‐MWCNTs) using the in situ TEM/scanning tunneling microscopy (TEM/STM) Nanofactory© holder. It is observed for the first time that N‐MWCNTs not only undergo current‐induced structural transformation; i.e., from the typical bamboo structure of N‐MWCNTs to the stacked cones, but also—and most importantly—the complete removal of the dopant causes a significant change in the electronic behavior. This has serious implications for the use of doped CNTs as electronic components, especially since tremendous efforts are being made to synthesize CNTs with controlled dopant concentrations.     

Interface Engineering and Controlling the Friction and Wear of Ultrathin Carbon Films: High sp3 Versus High sp2 Carbons

Understanding and engineering interfaces, and controlling the friction and wear of materials, are extremely important for many technological applications, particularly for magnetic storage technologies and micro‐ and nanoelectromechanical systems (MEMS and NEMS), where one sliding/moving surface comes into contact with another. Ultrathin carbon films are generally employed in most of these technologies. However, their wear and friction mechanisms are not well understood, especially the role of the film–substrate (FS) interface has not been deeply explored and discussed to date. This limits further developments in this field. Through experimental and theoretical experiments, we are able to report on the engineering of a FS interface consisting of high sp³‐ and high sp²‐bonded ultrathin carbon films on Al₂O₃–TiC substrates by introducing a silicon nitride (SiN_x) interlayer and tuning the carbon ion energy. All carbon‐based overcoats show a low coefficient of friction (COF) in the range of 0.08–0.16; however, the high sp³‐bonded C/SiN_x bilayer overcoat reveals the lowest and most stable friction. The friction mechanism is explained using an integrated framework of surface passivation, rehybridization, material transfer, tribolayer formation, and interfaces. We discover that FS interface engineering substantially reduces the wear of ultrathin carbon films while maintaining/reducing the friction. In general, this approach can be applied to control the friction and wear of ultrathin films of diverse materials.     

Interplay of Properties and Functions upon Introduction of Mesoporosity in ITQ‐4 Zeolite

The introduction of mesoporosity in zeolites is often directly coupled to changes in their overall catalytic performance without the detailed assessment of other key functions required for the rational design of the catalytic process such as accessibility, adsorption, and transport. This study presents an integrated approach to study property–function relationships in hierarchical zeolites. Accordingly, desilication of the 1D ITQ‐4 zeolite in alkaline medium is applied to develop different degrees of mesoporosity. Along with porosity modification, significant changes in composition, structure, and acidity occur. Relationships are established between the physicochemical properties of the zeolites and their characteristics in the adsorption and elution of light hydrocarbons (C₂ to C₅, alkanes and alkenes) as well as in the catalytic activity in low‐density polyethylene (LDPE) pyrolysis. The recently introduced hierarchy factor can appropriately relate porosity changes to catalytic performance.     

Simple and Efficient Generation of White Light Emission From Organophosphorus Building Blocks

This paper describes a structure–property study using two dithieno[3,2‐b;2′,3′‐d]phosphole building blocks for the generation of white light emission and the incorporation of these units in a single polystyrene material. The emission of one of the light‐emitting organophosphorus building blocks can efficiently be switched from orange to green by simple protonation of the amino functional groups that are part of the π‐conjugated scaffold. The resulting three components (blue, green, and orange) exhibit photophysical properties that allow for an efficient fluorescence resonance energy transfer (FRET) in the mixture/polymer and provide intense white fluorescence upon excitation of the blue component; the fluorescence is close to pure white in solution and similar to the emission of an incandescent light bulb in the thin film. The results nicely illustrate the intriguing features that can be obtained by exclusively using organophosphorus‐based organic electronic materials.     

Nanoscale Effects on the Ionic Conductivity of Highly Doped Bulk Nanometric Cerium Oxide

Nanometric ceria powders doped with 30 mol % samaria are consolidated by a high‐pressure spark plasma sintering (HP‐SPS) method to form > 99 % dense samples with a crystallite size as small as 16.5 nm. A conductivity dependence on grain size was noted: when the grain size was less than 20 nm, only one semicircle in the AC impedance spectra was observed and was attributed to bulk conductivity. In contrast to previous observations on pure ceria, the disappearance of the grain‐boundary blocking effect is not associated with mixed conductivity. With annealing and concomitant grain growth, the samples show the presence of a grain‐boundary effect.     

Mesomorphic Organization and Thermochromic Luminescence of Dicyanodistyrylbenzene‐Based Phasmidic Molecular Disks: Uniaxially Aligned Hexagonal Columnar Liquid Crystals at Room Temperature with Enhanced Fluorescence Emission and Semiconductivity

A new dicyanodistyrylbenzene‐based phasmidic molecule, (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(3,4,5‐tris(dodecyloxy)phenyl)acrylonitrile), GDCS, is reported, which forms a hexagonal columnar liquid crystal (LC) phase at room temperature (RT). GDCS molecules self‐assemble into supramolecular disks consisting of a pair of molecules in a side‐by‐side disposition assisted by secondary bonding interactions of the lateral polar cyano group, which, in turn, constitute the hexagonal columnar LC structure. GDCS shows very intense green/yellow fluorescence in liquid/solid crystalline states, respectively, in contrast to the total absence of fluorescence emission in the isotropic melt state according to the characteristic aggregation‐induced enhanced emission (AIEE) behavior. The AIEE and two‐color luminescence thermochromism of GDCS are attributed to the peculiar intra‐ and intermolecular interactions of dipolar cyanostilbene units. It was found that the intramolecular planarization and restricted molecular motion associated with a specific stacking situation in the liquid/solid crystalline phases are responsible for the AIEE phenomenon. The origin of the two‐color luminescence was elucidated to be due to the interdisk stacking alteration in a given column driven by the specific local dipole coupling between molecular disks. These stacking changes, in turn, resulted in the different degree of excited‐state dimeric coupling to give different emission colors. To understand the complicated photophysical properties of GDCS, temperature‐dependent steady‐state and time‐resolved PL measurements have been comprehensively carried out. Uniaxially aligned and highly fluorescent LC and crystalline microwires of GDCS are fabricated by using the micromolding in capillaries (MIMIC) method. Significantly enhanced electrical conductivity (0.8 × 10^?5 S?cm^?1/3.9 × 10^?5 S?cm^?1) of the aligned LC/crystal microwires were obtained over that of multi‐domain LC sample, because of the almost perfect shear alignment of the LC material achieved in the MIMIC mold.     

In Situ Preparation of Sandwich MoO3/C Hybrid Nanostructures for High‐Rate and Ultralong‐Life Supercapacitors

This work presents a design of sandwich MoO₃/C hybrid nanostructure via calcination of the dodecylamine‐intercalated layered α‐MoO₃, leading to the in situ production of the interlayered graphene layer. The sample with a high degree of graphitization of graphene layer and more interlayered void region exhibits the most outstanding energy storage performance. The obtained material is capable of delivering a high specific capacitance of 331 F g^?1 at a current density of 1 A g^?1 and retained 71% capacitance at 10 A g^?1. In addition, nearly no discharge capacity decay between 1000 and 10 000 continuous charge–discharge cycles is observed at a high current density of 10 A g^?1, indicating an excellent specific capacitance retention ability. The exceptional rate capability endows the electrode with a high energy density of 41.2 W h kg^?1 and a high power density of 12.0 kW kg^?1 simultaneously. The excellent performance is attributed to the sandwich hybrid nanostructure of MoO₃/C with broad ion diffusion pathway, low charge‐transfer resistance, and robust structure at high current density for long‐time cycling. The present work provides an insight into the fabrication of novel electrode materials with both enhanced rate capability and cyclability for potential use in supercapacitor and other energy storage devices.     

Structure–Thermodynamic‐Property Relationships in Cyanovinyl‐Based Microporous Polymer Networks for the Future Design of Advanced Carbon Capture Materials

Nitrogen‐rich solid absorbents, which have been immensely tested for carbon dioxide capture, seem until this date to be without decisive molecular engineering or design rules. Here, a family of cyanovinylene‐based microporous polymers synthesized under metal‐catalyzed conditions is reported as a promising candidate for advanced carbon capture materials. These networks reveal that isosteric heats of CO₂ adsorption are directly proportional to the amount of their functional group. Motivated by this finding, polymers produced under base‐catalyzed conditions with tailored quantities of cyanovinyl content confirm the systematical tuning of their sorption enthalpies to reach 40 kJ mol^?1. This value is among the highest reported to date in carbonaceous networks undergoing physisorption. A six‐point‐plot reveals that the structure–thermodynamic‐property relationship is linearly proportional and can thus be perfectly fitted to tailor‐made values prior to experimental measurements. Dynamic simulations show a bowl‐shaped region within which CO₂ is able to sit and interact with its conjugated surrounding, while theoretical calculations confirm the increase of binding sites with the increase of Ph? C?C(CN)? Ph functionality in a network. This concept presents a distinct method for the future design of carbon dioxide capturing materials.     

Materials in Organic Electrochemical Transistors for Bioelectronic Applications: Past,Present, and Future

Organic electrochemical transistors are bioelectronic devices that exploit the coupled nature of ionic and electronic fluxes to achieve superior transducing abilities compared to conventional organic field effect transistors. In particular, the operation of organic electrochemical transistors relies on a channel material capable of conducting both ionic and electronic charge carriers to ensure bulk electrochemical doping. This review explores the various types of organic semiconductors that are employed as channel materials, with a particular focus on the past 5 years, during which the transducing abilities of organic electrochemical transistors have witnessed an almost tenfold increase. Specifically, the structure–property relationships of the various channel materials employed are investigated, highlighting how device performance can be related to functionality at the molecular level. Finally, an outlook on the field is provided, in particular toward the design guidelines of future materials and the challenges ahead in the field.     

Interaction of Zoospores of the Green Alga Ulva with Bioinspired Micro‐ and Nanostructured Surfaces Prepared by Polyelectrolyte Layer‐by‐Layer Self‐Assembly

The interaction of spores of Ulva with bioinspired structured surfaces in the nanometer–micrometer size range is investigated using a series of coatings with systematically varying morphology and chemistry, which allows separation of the contributions of morphology and surface chemistry to settlement (attachment) and adhesion strength. Structured surfaces are prepared by layer‐by‐layer spray‐coating deposition of polyelectrolytes. By changing the pH during application of oppositely charged poly(acrylic acid) and polyethylenimine polyelectrolytes, the surface structures are systematically varied, which allows the influence of morphology on the biological response to be determined. In order to discriminate morphological from chemical effects, surfaces are chemically modified with poly(ethylene glycol) and tridecafluoroctyltriethoxysilane. This chemical modification changes the water contact angles while the influence of the morphology is retained. The lowest level of settlement is observed for structures of the order 2 µm. All surfaces are characterized with respect to their wettability, chemical composition, and morphological properties by contact angle measurement, X‐ray photoelectron spectroscopy, scanning electron microscopy, and atomic force microscopy.     

Acceptor‐Substituted S,N‐Heteropentacenes of Different Conjugation Length: Structure–Property Relationships and Solar Cell Performance

The synthesis, optoelectronic, and photovoltaic properties of novel acceptor–donor–acceptor (A–D–A) based π‐conjugated functional molecules 1 – 3, comprising a planar S,N‐heteropentacene as central donor substituted with various terminal acceptor units, such as 1,1‐dicyanovinylene (DCV) and 1‐(1,1‐dicyanomethylene)‐cyclohex‐2‐ene (DCC), are reported. The structural variation of the end groups provides molecules 1 – 3 with gradually increased π‐conjugation due to a rising number of double bonds, which comes from the DCC unit(s). From optoelectronic investigation, structure–property relationships are deduced and the novel A–D–A heteropentacenes 1 – 3 are implemented as photoactive donor component in solution‐processed bulk heterojunction solar cells together with [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as acceptor. The structural variation in the S,N‐heteropentacenes leads to clear trends in the photovoltaic performance and power conversion efficiencies of up to 4.9% are achieved. Furthermore, due to extension of the double bonds a clear trade‐off between the open circuit voltage (V _OC) and the short circuit current density (J _SC) values is observed. The role of additives on the optimization of the nanoscale morphology and device performance is investigated. The findings presented herein demonstrate that depending on the types of materials the additive may have significantly different effects on the active layer morphology and the device performance.     

Effect of Contact Mode on the Electrical Transport and Field‐Emission Performance of Individual Boron Nanowires

Vapor–liquid–solid processing of boron nanowires (BNWs) can be carried out either using a bottom‐up or top‐down growth mode, which results in different contact modes between the nanowire and the substrate. The contact mode may strongly affect the electrical transport and field‐emission performance of the individual boron nanowires grown on a Si substrate. The electrical transport and field‐emission characteristics of individual boron nanowires of different contact modes are investigated in situ using a scanning electron microscope. The contact barriers are very distinct for the different contact modes. Moreover, the transition from a “contact‐limited” to a “bulk‐limited” field‐emission (FE) process is demonstrated in nanoemitters for the first time, and the proposed improved metal–insulator–vacuum (MIV) model may better illustrate the nonlinear behavior of the Fowler‐Nordheim (FN) plots in these nanoscale systems. Individual BNWs with different contact modes have a discrepancy in their emission stability and vacuum breakdown characteristics though they have similar aspect ratios, which suggests that their electrical transport and field‐emission performance are closely related to their contact mode. Boron nanowires grown in the base‐up mode have better field‐emission performances and are more beneficial than those grown in the top‐down mode for various device applications.     

Role of the Anion on the Transport and Structure of Organic Mixed Conductors

Organic mixed conductors are increasingly employed in electrochemical devices operating in aqueous solutions that leverage simultaneous transport of ions and electrons. Indeed, their mode of operation relies on changing their doping (oxidation) state by the migration of ions to compensate for electronic charges. Nevertheless, the structural and morphological changes that organic mixed conductors experience when ions and water penetrate the material are not fully understood. Through a combination of electrochemical, gravimetric, and structural characterization, the effects of water and anions with a hydrophilic conjugated polymer are elucidated. Using a series of sodium‐ion aqueous salts of varying anion size, hydration shells, and acidity, the links between the nature of the anion and the transport and structural properties of the polymer are systematically studied. Upon doping, ions intercalate in the crystallites, permanently modifying the lattice spacings, and residual water swells the film. The polymer, however, maintains electrochemical reversibility. The performance of electrochemical transistors reveals that doping with larger, less hydrated, anions increases their transconductance but decreases switching speed. This study highlights the complexity of electrolyte‐mixed conductor interactions and advances materials design, emphasizing the coupled role of polymer and electrolyte (solvent and ion) in device performance.     

A Novel Polymeric Ionomer as a Potential Biomaterial: Crystallization Behavior,Degradation, and In‐Vitro Cellular Interactions

To evaluate the potential of polyester‐based ionomers as biomaterials, we have characterized them in terms of crystallization behavior, degradation, and in‐vitro cellular interactions. The polymers used are poly(butylene succinate)‐based ionomers (PBSis) with 1 to 5 mol‐% dimethyl 5‐sodium sulfoisophthalate. Even a few incorporated ionic groups significantly decreases the folding surface energy, indicating that folding into crystalline lamellae is more difficult for chains restricted by ionic aggregates. Transmission electron microscopy (TEM) does not reveal any distinct aggregation of ionic clusters following hydrolytic degradation, which suggests that the physical crosslinkage due to ionic interactions is vulnerable to hydrolysis. The in‐vitro cellular interactions of polyester‐based ionomers is assessed by the culture of human dermal fibroblasts with PBSi extracts or in direct contact with the PBSi films. Cells on PBSi films and in their extracts exhibit appropriate specific growth rates and normal metabolic function regardless of the incorporated ionic content compared with poly[(D ,L ‐lactic acid)‐co‐(glycolic acid)] (75:25, PLGA), which is well known to be biocompatible. The cells growing on PBSi films spread to a sufficient extent, displaying relatively active filopodial growth, as compared to that of parent PBS. These results suggest that the conspicuous topology and hydrophilic nature of the ionomer surface affect cellular interactions, and that this ionomer therefore has potential applications as a biomaterial.     

Sequence–Structure–Property Relationships of Recombinant Spider Silk Proteins: Integration of Biopolymer Design,Processing, and Modeling

The mechanical properties of spider silks drive interest as sources of new materials. However, there remains a lot to learn regarding the relationships between sequence, structure, and mechanical properties. In order to predict the types of sequence–functional relationships, synthesis–characterization–computation are integrated using recombinant spider silk‐like block copolymers. Two designs are studied, both with origins from the spider Nephila clavipes. These proteins are studied both experimentally and in silico to understand the relationships between sequence chemistry, processing, structure, and materials function. Films formed from the two proteins are thoroughly characterized. In parallel, molecular modeling is used to assess the propensity of the two sequences to form β‐sheets or crystalline structures. The results demonstrate that the modeling predicts the structural differences between the two silk‐like polymers and these features can also be related to differences in functional outcomes. With this example of relating sequence design (hydrophobic–hydrophilic domains), experiment (genetic design and synthesis), processing (film and fiber formation) and modeling (predictions of crystallinity), synergy among these methods is demonstrated for predictable material outcomes. This approach offers a robust discovery path when looking towards next generation approaches to targeted materials outcomes.     

Yolk–Shell Structured Assembly of Bamboo‐Like Nitrogen‐Doped Carbon Nanotubes Embedded with Co Nanocrystals and Their Application as Cathode Material for Li–S Batteries

Despite their high theoretical specific capacity (1675 mA h g^?1), the practical application of Li–S batteries remains limited because the capacity rapidly degrades through severe dissolution of lithium polysulfide and the rate capability is low because of the low electronic conductivity of sulfur. This paper describes novel hierarchical yolk–shell microspheres comprising 1D bamboo‐like N‐doped carbon nanotubes (CNTs) encapsulating Co nanoparticles (Co@BNCNTs YS microspheres) as efficient cathode hosts for Li–S batteries. The microspheres are produced via a two‐step process that involves generation of the microsphere followed by N‐doped CNTs growth. The hierarchical yolk–shell structure enables efficient sulfur loading and mitigates the dissolution of lithium polysulfides, and metallic Co and N doping improves the chemical affinity of the microspheres with sulfur species. Accordingly, a Co@BNCNTs YS microsphere‐based cathode containing 64 wt% sulfur exhibits a high discharge capacity of 700.2 mA h g^?1 after 400 cycles at a current density of 1 C (based on the mass of sulfur); this corresponds to a good capacity retention of 76% and capacity fading rate of 0.06% per cycle with an excellent rate performance (752 mA h g^?1 at 2.0 C) when applied as cathode hosts for Li–S batteries.