Modular Graphene‐Based 3D Covalent Networks: Functional Architectures for Energy Applications

The development of ordered graphene‐based materials combining high stability, large surface areas, ability to act as absorbent of relevant chemical species, and solution processability is of significance for energy applications. A poorly explored approach relies on the controlled nanostructuration of graphene into robust and highly ordered 3D networks as a route to further leverage the exceptional properties of this unique material. Here, a simple yet effective and scalable one‐step method is reported to prepare graphene‐based 3D covalent networks (G3DCNs) with tunable interlayer distance via controlled polymerization of benzidines with graphene oxide at different reaction temperatures under catalyst‐ and template‐free conditions. The reduced form of G3DCNs is used as electrodes in supercapacitors; it reveals a high specific capacitance of 156 F g^?1 at a current density of 1 A g^?1 in a two‐electrode configuration and 460 F g^?1 at a current density of 0.5 A g^?1 in a three‐electrode configuration, combined with an excellent cycling stability over 5000 cycles. The present study will promote the quantitative understanding of structure–property relationship, for the controlled fabrication of 3D graphene‐based multifunctional materials.     

Electrical Coupling Between Cells and Graphene Transistors

In this work, both experimental data and a model are presented on the coupling between living cells and graphene solution‐gated field‐effect transistors. Modified HEK 293 cells are successfully cultured on graphene transistor arrays and electrically accessed by the patch clamp method. Transistor recordings are presented, showing the opening and closing of voltage‐gated potassium ion channels in the cell membrane. The experimental data is compared with the broadly used standard point‐contact model. The ion dynamics in the cell–transistor cleft are analyzed to account for the differences between the model and the experimental data revealing a significant increase in the total ionic strength in the cleft. In order to describe the influence of the ion concentration resulting from the cell activity, the ion‐sensitivity of graphene solution‐gated field‐effect transistors is investigated experimentally and modelled by considering the screening effect of the ions on the surface potential at the graphene/electrolyte interface. Finally, the model of the cell–transistor coupling is extended to include the effect of ion accumulation and ion sensitivity. The experimental data shows a very good agreement with this extended model, emphasizing the importance of considering the ion concentration in the cleft to properly understand the cell‐transistor coupling.     

Monolayer Graphene Coupled to a Flexible Plasmonic Nanograting for Ultrasensitive Strain Monitoring

Plasmonically coupled graphene structures have shown great promise for sensing applications. Their complex and cumbersome fabrication, however, has prohibited their widespread application and limited their use to rigid, planar surfaces. Here, a plasmonic sensor based on gold nanowire arrays on an elastomer with an added graphene monolayer is introduced. The stretchable plasmonic nanostructures not only significantly enhance the Raman signal from graphene, but can also be used by themselves as a sensor platform for 2D strain sensing. These nanowire arrays on an elastomer are fabricated by template‐stripping based nanotransfer printing, which enables a simple and fast production of stable nanogratings. The ultrasmooth surfaces of such transferred structures facilitate reliable large‐area transfers of graphene monolayers. The resulting coupled graphene‐nanograting construct exhibits ultrahigh sensitivity to applied strain, which can be detected by shifts in the plasmonic‐enhanced Raman spectrum. Furthermore, this sensor enables the detection of adsorbed molecules on nonplanar surfaces through graphene‐assisted surface enhanced Raman spectroscopy (SERS). The simple fabrication of the plasmonic nanowire array platform and the graphene‐coupled devices have the potential to trigger widespread SERS applications and open up new opportunities for high‐sensitivity strain sensing applications.     

Water Affinity to Epitaxial Graphene: The Impact of Layer Thickness

The sensitivity to water vapour of one‐, two‐, and three‐layer epitaxial graphene (1, 2, and 3LG) is examined in this study. It is unambiguously shown that graphene's response to water, as measured by changes in work function and carrier density, is dependent on its thickness, with 1LG being the most sensitive to water adsorption and environmental concentration changes. This is furthermore substantiated by surface adhesion measurements, which bring evidence that 1LG is less hydrophobic than 2LG. Yet, surprisingly, it is found that other contaminants commonly present in ambient air have a greater impact on graphene response than water vapor alone. This study indicates that graphene sensor design and calibration to minimize or discriminate the effect of the ambient, in which it is intended to operate, are necessary to insure the desired sensitivity and reliability of sensors. The present work will aid in developing models for realistic graphene sensors and establishing protocols for molecular sensor design and development.     

Hierarchically porous graphene as a lithium-air battery electrode

The lithium-air battery is one of the most promising technologies among various electrochemical energy storage systems. We demonstrate that a novel air electrode consisting of an unusual hierarchical arrangement of functionalized graphene sheets (with no catalyst) delivers an exceptionally high capacity of 15000 mAh/g in lithium-O(2) batteries which is the highest value ever reported in this field. This excellent performance is attributed to the unique bimodal porous structure of the electrode which consists of microporous channels facilitating rapid O(2) diffusion while the highly connected nanoscale pores provide a high density of reactive sites for Li-O(2) reactions. Further, we show that the defects and functional groups on graphene favor the formation of isolated nanosized Li(2)O(2) particles and help prevent air blocking in the air electrode. The hierarchically ordered porous structure in bulk graphene enables its practical applications by promoting accessibility to most graphene sheets in this structure.     

Nitrogen‐Superdoped 3D Graphene Networks for High‐Performance Supercapacitors

An N‐superdoped 3D graphene network structure with an N‐doping level up to 15.8 at% for high‐performance supercapacitor is designed and synthesized, in which the graphene foam with high conductivity acts as skeleton and nested with N‐superdoped reduced graphene oxide arogels. This material shows a highly conductive interconnected 3D porous structure (3.33 S cm^?1), large surface area (583 m² g^?1), low internal resistance (0.4 Ω), good wettability, and a great number of active sites. Because of the multiple synergistic effects of these features, the supercapacitors based on this material show a remarkably excellent electrochemical behavior with a high specific capacitance (of up to 380, 332, and 245 F g^?1 in alkaline, acidic, and neutral electrolytes measured in three‐electrode configuration, respectively, 297 F g^?1 in alkaline electrolytes measured in two‐electrode configuration), good rate capability, excellent cycling stability (93.5% retention after 4600 cycles), and low internal resistance (0.4 Ω), resulting in high power density with proper high energy density.     

Fast Batch Production of High‐Quality Graphene Films in a Sealed Thermal Molecular Movement System

Chemical vapor deposition (CVD) growth of high‐quality graphene has emerged as the most promising technique in terms of its integrated manufacturing. However, there lacks a controllable growth method for producing high‐quality and a large‐quantity graphene films, simultaneously, at a fast growth rate, regardless of roll‐to‐roll (R2R) or batch‐to‐batch (B2B) methods. Here, a stationary‐atmospheric‐pressure CVD (SAPCVD) system based on thermal molecular movement, which enables fast B2B growth of continuous and uniform graphene films on tens of stacked Cu(111) foils, with a growth rate of 1.5 µ m s^?1, is demonstrated. The monolayer graphene of batch production is found to nucleate from arrays of well‐aligned domains, and the films possess few defects and exhibit high carrier mobility up to 6944 cm² V^?1 s^?1 at room temperature. The results indicate that the SAPCVD system combined with single‐domain Cu(111) substrates makes it possible to realize fast batch‐growth of high‐quality graphene films, which opens up enormous opportunities to use this unique 2D material for industrial device applications.     

A High Energy and Power Li‐Ion Capacitor Based on a TiO2 Nanobelt Array Anode and a Graphene Hydrogel Cathode

A novel hybrid Li‐ion capacitor (LIC) with high energy and power densities is constructed by combining an electrochemical double layer capacitor type cathode (graphene hydrogels) with a Li‐ion battery type anode (TiO₂ nanobelt arrays). The high power source is provided by the graphene hydrogel cathode, which has a 3D porous network structure and high electrical conductivity, and the counter anode is made of free‐standing TiO₂ nanobelt arrays (NBA) grown directly on Ti foil without any ancillary materials. Such a subtle designed hybrid Li‐ion capacitor allows rapid electron and ion transport in the non‐aqueous electrolyte. Within a voltage range of 0.0?3.8 V, a high energy of 82 Wh kg^?1 is achieved at a power density of 570 W kg^?1. Even at an 8.4 s charge/discharge rate, an energy density as high as 21 Wh kg^?1 can be retained. These results demonstrate that the TiO₂ NBA//graphene hydrogel LIC exhibits higher energy density than supercapacitors and better power density than Li‐ion batteries, which makes it a promising electrochemical power source.     

High‐ versus Low‐Quality Graphene: A Mechanistic Investigation of Electrografted Diazonium‐Based Films for Growth of Polymer Brushes

Electrografting using aryldiazonium salts provides a fast and efficient technique to functionalize commercially available 3?5 layered graphene (vapour‐deposited) on nickel. In this study, Raman spectroscopy is used to quantify the grafting efficiency of cyclic voltammetry which is one of the most versatile, yet simple, electrochemical techniques available. To a large extent the number of defects/substituents introduced to the basal plane of high‐quality graphene by this procedure can be controlled through the sweeping conditions employed. After extended electrografting the defect density reaches a saturation level (～10¹³ cm^?2) which is independent of the quality of the graphene expressed through its initial content of defects. However, it is reached within fewer voltammetric cycles for low‐quality graphene. Based on these results it is suggested that the grafting occurs (a) directly at defect sites for, in particular, low‐quality graphene, (b) directly at the basal plane for, in particular, high‐quality graphene, and/or (c) at already grafted molecules to give a mushroom‐like film growth for all films. Moreover, it is shown that a tertiary alkyl bromide can be introduced at a given surface density to serve as radical initiator for surface‐initiated atom transfer radical polymerization (SI‐ATRP). Brushes of poly(methyl methacrylate) are grown from these substrates, and the relationship between polymer thickness and sweeping conditions is studied.     

Vertically Aligned Graphene–Carbon Fiber Hybrid Electrodes with Superlong Cycling Stability for Flexible Supercapacitors

Graphene electrode–based supercapacitors are in high demand due to their superior electrochemical characteristics. A major bottleneck of using the supercapacitors for commercial applications lies in their inferior electrode cycle life. Herein, a simple and facile method to fabricate highly efficient supercapacitor electrodes using pristine graphene sheets vertically stacked and electrically connected to the carbon fibers which can result in vertically aligned graphene–carbon fiber nanostructure is developed. The vertically aligned graphene–carbon fiber electrode prepared by electrophoretic deposition possesses a mesoporous 3D architecture which enabled faster and efficient electrolyte‐ion diffusion with a gravimetric capacitance of 333.3 F g^?1 and an areal capacitance of 166 mF cm^?2. The electrodes displayed superlong electrochemical cycling stability of more than 100 000 cycles with 100% capacitance retention hence promising for long‐lasting supercapacitors. Apart from the electrochemical double layer charge storage, the oxygen‐containing surface moieties and α‐Ni(OH)₂ present on the graphene sheets enhance the charge storage by faradaic reactions. This enables the assembled device to provide an excellent gravimetric energy density of 76 W h kg^?1 with a 100% capacitance retention even after 1000 bending cycles. This study opens the door for developing high‐performing flexible graphene electrodes for wearable energy storage applications.     

Solution Adsorption Formation of a π‐Conjugated Polymer/Graphene Composite for High‐Performance Field‐Effect Transistors

Semiconducting polymers with π‐conjugated electronic structures have potential application in the large‐scale printable fabrication of high‐performance electronic and optoelectronic devices. However, owing to their poor environmental stability and high‐cost synthesis, polymer semiconductors possess limited device implementation. Here, an approach for constructing a π‐conjugated polymer/graphene composite material to circumvent these limitations is provided, and then this material is patterned into 1D arrays. Driven by the π–π interaction, several‐layer polymers can be adsorbed onto the graphene planes. The low consumption of the high‐cost semiconductor polymers and the mass production of graphene contribute to the low‐cost fabrication of the π‐conjugated polymer/graphene composite materials. Based on the π‐conjugated system, a reduced π–π stacking distance between graphene and the polymer can be achieved, yielding enhanced charge‐transport properties. Owing to the incorporation of graphene, the composite material shows improved thermal stability. More generally, it is believed that the construction of the π‐conjugated composite shows clear possibility of integrating organic molecules and 2D materials into microstructure arrays for property‐by‐design fabrication of functional devices with large area, low cost, and high efficiency.     

Synthesis of P‐Doped and NiCo‐Hybridized Graphene‐Based Fibers for Flexible Asymmetrical Solid‐State Micro‐Energy Storage Device

Fiber supercapacitors (FSCs) are promising energy storage devices in portable and wearable smart electronics. Currently, a major challenge for FSCs is simultaneously achieving high volumetric energy and power densities. Herein, the microscale fiber electrode is designed by using carbon fibers as substrates and capillary channels as microreactors to space‐confined hydrothermal assembling. As P‐doped graphene oxide/carbon fiber (PGO/CF) and NiCo₂O₄‐based graphene oxide/carbon fiber (NCGO/CF) electrodes are successfully prepared, their unique hybrid structures exhibit a satisfactory electrochemical performance. An all‐solid‐state PGO/CF//NCGO/CF flexible asymmetric fiber supercapacitor (AFSC) based on the PGO/CF as the negative electrode, NCGO/CF hybrid electrode as the positive electrode, and poly(vinyl alcohol)/potassium hydroxide as the electrolyte is successfully assembled. The AFSC device delivers a higher volumetric energy density of 36.77 mW h cm^?3 at a power density of 142.5 mW cm^?3. In addition, a double reference electrode system is adopted to analyze and reduce the IR drop, as well as effectively matching negative and positive electrodes, which is conducive for the optimization and improvement of energy density. For the AFSC device, its better flexibility and electrochemical properties create a promising potential for high‐performance micro‐supercapacitors. Furthermore, the introduction of the double reference electrode system provides an interesting method for the study on the electrochemical performances of two‐electrode systems.     

Large-area nanopatterned graphene for ultrasensitive gas sensing

Chemical vapor deposited （CVD） graphene is nanopatterned using a spherical block copolymer etch mask. The use of spherical rather than cylindrical block copolymers allows homogeneous patterning of cm-scale areas without any substrate surface treatment. Raman spectroscopy was used to study the con- trolled generation of point defects in the graphene lattice with increasing etching time, confirming that alongside the nanomesh patterning, the nanopatterned CVD graphene presents a high defect density between the mesh holes. The nanopatterned samples showed sensitivities for NO2 of more than one order of magnitude higher than for non-patterned graphene. NO2 concentrations as low as 300 ppt were detected with an ultimate detection limit of tens of ppt. This is the smallest value reported so far for non-UV illuminated graphene chemiresistive NO2 gas sensors. The dramatic improvement in the gas sensitivity is believed to be due to the high adsorption site density, thanks to the combination of edge sites and point defect sites. This work opens the possibility of large area fabrication of nanopatterned graphene with extremely high densities of adsorption sites for sensing applications.     

An Impedimetric‐Fluorescence Double‐Checking Biosensor with Enhanced Reliability Based on Graphene Oxide

MicroRNA (miRNA) is a class of clinically significant diagnostic and prognostic markers for some diseases, especially for cancer. Graphene oxide (GO) has been reported to bind and quench dye‐labeled single‐stranded DNA (ssDNA) probes while it has less affinity toward double‐stranded DNA (dsDNA) or hybrids of DNA/RNA. This property makes it very suitable to construct a double‐checking system for miRNA detection, thus increasing the reliability of detection. This kind of double‐checking sensor will have great potential in clinical diagnosis. Based on this concept, in this study a simple and sensitive electrochemical impedance spectroscopy biosensor for miRNA‐21 is developed using a GO‐coated electrode. Simultaneously, the fluorescence of the remaining hybridization solution which contains dissociated duplex of ssDNA/miRNA is also investigated to double check the signal and increase its reliability. Therefore, a GO‐based double‐checking biosensor is developed for miRNA‐21 detection, which shows simplicity, high sensitivity and selectivity, and outstanding reliability. This is the first time to integrate the electrochemical impedimetric method and fluorescence method in one sensing system for detecting miRNA based on GO. It is believed that this work will have a profound impact on the design of graphene‐based biosensors for miRNA detection.     

High Performance of N‐Doped Graphene with Bubble‐like Textures for Supercapacitors

Nitrogen‐doped graphene (NG) with wrinkled and bubble‐like texture is fabricated by a thermal treatment. Especially, a novel sonication‐assisted pretreatment with nitric acid is used to further oxidize graphene oxide and its binding with melamine molecules. There are many bubble‐like nanoflakes with a dimension of about 10 nm appeared on the undulated graphene nanosheets. The bubble‐like texture provides more active sites for effective ion transport and reversible capacitive behavior. The specific surface area of NG (5.03 at% N) can reach up to 438.7 m² g^?1, and the NG electrode demonstrates high specific capacitance (481 F g^?1 at 1 A g^?1, four times higher than reduced graphene oxide electrode (127.5 F g^?1)), superior cycle stability (the capacitance retention of 98.9% in 2 m KOH and 99.2% in 1 m H₂SO₄ after 8000 cycles), and excellent energy density (42.8 Wh kg^?1 at power density of 500 W kg^?1 in 2 m KOH aqueous electrolyte). The results indicate the potential use of NG as graphene‐based electrode material for energy storage devices.     

3D Printing of Ultralight Biomimetic Hierarchical Graphene Materials with Exceptional Stiffness and Resilience

Biological materials with hierarchical architectures (e.g., a macroscopic hollow structure and a microscopic cellular structure) offer unique inspiration for designing and manufacturing advanced biomimetic materials with outstanding mechanical performance and low density. Most conventional biomimetic materials only benefit from bioinspired architecture at a single length scale (e.g., microscopic material structure), which largely limits the mechanical performance of the resulting materials. There exists great potential to maxime the mechanical performance of biomimetic materials by leveraging a bioinspired hierarchical structure. An ink‐based three‐dimensional (3D) printing strategy to manufacture an ultralight biomimetic hierarchical graphene material (BHGMs) with exceptionally high stiffness and resilience is demonstrated. By simultaneously engineering 3D‐printed macroscopic hollow structures and constructing an ice‐crystal‐induced cellular microstructure, BHGMs can achieve ultrahigh elasticity and stability at compressive strains up to 95%. Multiscale finite element analyses indicate that the hierarchical structures of BHGMs effectively reduce the macroscopic strain and transform the microscopic compressive deformation into the rotation and bending of the interconnected graphene flakes. This 3D printing strategy demonstrates the great potential that exists for the assembly of other functional materials into hierarchical cellular structures for various applications where high stiffness and resilience at low density are simultaneously required.     

Nanomechanical and Charge Transport Properties of Two‐Dimensional Atomic Sheets

The materials properties of graphene and other two‐dimensional atomic sheets are influenced by atomic‐scale defects, mechanical deformation, and microstructures. Thus, for graphene‐based applications, it is essential to uncover the roles of atomic‐scale defects and domain structures of two‐dimensional layers in charge transport properties. This review highlights recent studies of nanomechanical and charge transport properties of two‐dimensional atomic sheets, including graphene, MoS₂, and boron nitrides. Because of intrinsic structural differences, two‐dimensional atomic sheets give rise to unique nanomechanical properties, including a dependence on layer thickness and chemical modification that is in contrast to three‐dimensional continuum media. Mapping of local conductance and nanomechanical properties on a graphene layer can be used to image the domain and microstructures of two‐dimensional atomic layers. This paper also reviews recent experimental and theoretical findings on the role of bending, defects, and microstructures on nanomechanical and transport properties of graphene‐derived materials.     

Stretchable All‐Gel‐State Fiber‐Shaped Supercapacitors Enabled by Macromolecularly Interconnected 3D Graphene/Nanostructured Conductive Polymer Hydrogels

Nanostructured conductive polymer hydrogels (CPHs) have been extensively applied in energy storage owing to their advantageous features, such as excellent electrochemical activity and relatively high electrical conductivity, yet the fabrication of self‐standing and flexible electrode‐based CPHs is still hampered by their limited mechanical properties. Herein, macromolecularly interconnected 3D graphene/nanostructured CPH is synthesized via self‐assembly of CPHs and graphene oxide macrostructures. The 3D hybrid hydrogel shows uniform interconnectivity and enhanced mechanical properties due to the strong macromolecular interaction between the CPHs and graphene, thus greatly reducing aggregation in the fiber‐shaping process. A proof‐of‐concept all‐gel‐state fibrous supercapacitor based on the 3D polyaniline/graphene hydrogel is fabricated to demonstrate the outstanding flexibility and mouldability, as well as superior electrochemical properties enabled by this 3D hybrid hydrogel design. The proposed device can achieve a large strain (up to ≈40%), and deliver a remarkable volumetric energy density of 8.80 mWh cm^?3 (at power density of 30.77 mW cm^?3), outperforming many fiber‐shaped supercapacitors reported previously. The all‐hydrogel design opens up opportunities in the fabrication of next‐generation wearable and portable electronics.     

Probing Defect‐Induced Midgap States in MoS2 Through Graphene–MoS2 Heterostructures

Crystalline defects in MoS₂ may induce midgap states, resulting in low carrier mobility. These midgap states are usually difficult to probe by conventional transport measurement. The quantum capacitance of single‐layer graphene is sensitive to defect‐induced states near the Dirac point, at which the density of states is extremely low. It is reported that the hexagonal‐boron nitride/graphene/MoS₂ sandwich structure facilitates the exploration of the properties of those midgap states in MoS₂. Comparative results of the quantum capacitance of pristine graphene indicate the presence of several midgap states with distinct features. Some of these states donate electrons while some states lead to localization of electrons. It is believed that these midgap states originate from intrinsic point defects such as sulfur vacancies, which have a significant impact on the property of the MoS₂/graphene interface. They are responsible for the contact problems of metal/MoS­₂ interfaces.     

CuS nanoplatelets arrays grown on graphene nanosheets as advanced electrode materials for supercapacitor applications

CuS nanoplatelets arrays grown on graphene nanosheets are successfully synthesized via a facile low-temperature solvothermal reaction with graphene oxide (GO), CH₃CSNH₂ and Cu(CH₃COO)₂·H₂O as the reactants. CH₃CSNH₂ plays an important role in being the reducing agent for GO and the sulfur source of CuS. Supercapacitive performance of the graphene/CuS nanocomposite as active electrode materials has been evaluated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy measurements. The results indicate that graphene/CuS electrode delivers a high capacitance of 497.8 F g^–1 at a current density of 0.2 A g^–1, which outperforms bare CuS electrode. This excellent performance is ascribed to the short diffusion path and large surface area of the unique hierarchical nanostructure with nanoflakes building blocks for bulk accessibility of faradaic reaction.