Vertical Organic Field‐Effect Transistors

Field‐effect transistors are the fundamental building blocks for electronic circuits and processors. Compared with inorganic transistors, organic field‐effect transistors (OFETs), featuring low cost, low weight, and easy fabrication, are attractive for large‐area flexible electronic devices. At present, OFETs with planar structures are widely investigated device structures in organic electronics and optoelectronics; however, they face enormous challenges in realizing large current density, fast operation speed, and outstanding mechanical flexibility for advancing their potential commercialized applications. In this context, vertical organic field‐effect transistors (VOFETs), composed of vertically stacked source/drain electrodes, could provide an effective approach for solving these questions due to their inherent small channel length and unique working principles. Since the first report of VOFETs in 2004, impressive progress has been witnessed in this field with the improvement of device performance. The aim of this review is to give a systematical summary of VOFETs with a special focus on device structure optimization for improved performance and potential applications demonstrated by VOFETs. An overview of the development of VOFETs along with current challenges and perspectives is also discussed. It is hoped that this review is timely and valuable for the next step in the rapid development of VOFETs and their related research fields.     

Metal Based Nonvolatile Field‐Effect Transistors

The reduction of metals from their oxides through solid electrochemical reactions usually requires a high temperature above 800 °C and a specially designed electrochemical structure. It is demonstrated that, in a simple field‐effect transistor (FET) structure, the redox reaction between Co metal and CoO_x is reversible under a small electric field and can be achieved at a moderate temperature below 200 °C. The FETs functioning through the reversible redox reaction show nonvolatile behavior and a high on/off ratio of about 10⁵. Moreover, the FETs show a threshold resistance switching behavior at high resistance states, but with opposite switching directions compared to normal metal/oxide/metal structures. The electric field induced metal–oxide transition may also be used for other energy storage applications.     

Light‐Emitting Field‐Effect Transistors Consisting of Bilayer‐Crystal Organic Semiconductors

A novel device structure for organic light‐emitting field‐effect transistors has been developed. The devices comprise bilayer‐crystal organic semiconductors of a p‐type and an n‐type. The pn‐junction can readily be formed by successively laminating two crystals on top of a gate insulator. This structure enables the efficient injection and transport of electrons and holes, leading to their effective recombination. As a result, bright emissions are attained. The devices are operated by AC gate voltages. Gate‐voltage phase‐resolved drain‐current and emission‐intensity measurements enable us to study the relationship between the emissions and carrier transport. The maximum external quantum efficiency reaches 0.045%.     

Field‐Effect Transistors on Photonic Cellulose Nanocrystal Solid Electrolyte for Circular Polarized Light Sensing

The integration of bioinspired chiral cellulose nanocrystal (CNC) films into transistor devices with distinct sensing properties for left‐ and right‐handed circular polarized light (LCPL and RCPL, respectively) is reported. The CNC films with a left‐handed internal long‐range order are infiltrated with sodium ions to yield solid‐state electrolytes with photonic properties capable of LCPL reflection and RCPL transmission. They are employed as gate dielectrics in sputtered amorphous indium–gallium–zinc oxide (a‐IGZO) transistors. The obtained devices operate in depletion mode at low voltages (<2 V) with On–Off ratios of up to 7 orders of magnitude, subthreshold swings around 80 mV dec^?1, and saturation mobilities up to 9 cm² V^?1 s^?1. Combining the photonic character of the CNC films with the light sensitivity of a‐IGZO, the devices are capable of discrimination between LCPL and RCPL signals in the blue region. These type of devices can find application in photonics, emission, conversion, or sensing with CPL but also imaging or spintronics.     

Light Emission in the Unipolar Regime of Ambipolar Organic Field‐Effect Transistors

Light emission from ambipolar organic field‐effect transistors (OFETs) is often observed when they are operated in the unipolar regime. This is unexpected, the light emission should be completely suppressed, because in the unipolar regime only one type of charge carrier is accumulated. Here, an electroluminescent diketopyrrolopyrrole copolymer is investigated. Local potential measurements by scanning Kelvin probe microscopy reveal a recombination position that is unstable in time due to the presence of injection barriers. The electroluminescence and electrical transport have been numerically analyzed. It is shown that the counterintuitive unipolar light emission is quantitatively explained by injection of minority carriers into deep tail states of the semiconductor. The density of the injected minority carriers is small. Hence they are relatively immobile and they recombine close the contact with accumulated majority carriers. The unipolar light output is characterized by a constant efficiency independent of gate bias. It is argued that light emission from OFETs predominantly originates from the unipolar regime when the charge transport is injection limited.     

Ultraviolet‐Light‐Induced Reversible and Stable Carrier Modulation in MoS2 Field‐Effect Transistors

The tuning of charge carrier concentrations in semiconductor is necessary in order to approach high performance of the electronic and optoelectronic devices. It is demonstrated that the charge‐carrier density of single‐layer (SL), bilayer (BL), and few‐layer (FL) MoS₂ nanosheets can be finely and reversibly tuned with N₂ and O₂ gas in the presence of deep‐ultraviolet (DUV) light. After exposure to N₂ gas in the presence of DUV light, the threshold voltages of SL, BL, and FL MoS₂ field‐effect transistors (FETs) shift towards negative gate voltages. The exposure to N₂ gas in the presence of DUV light notably improves the drain‐to‐source current, carrier density, and charge‐carrier mobility for SL, BL, and FL MoS₂ FETs. Subsequently, the same devices are exposed to O₂ gas in the presence of DUV light for different periods and the electrical characteristics are completely recovered after a certain time. The doping by using the combination of N₂ and O₂ gas with DUV light provides a stable, effective, and facile approach for improving the performance of MoS₂ electronic devices.     

Contact Doping for Vertical Organic Field‐Effect Transistors

Doping is a powerful tool to overcome contact limitations in short‐channel organic field‐effect transistors (OFETs) and has been successfully used in the past to improve the charge carrier injection in OFETs. The present study applies this familiar concept to the architecture of vertical organic field‐effect transistors (VOFETs), which are often severely limited by injection due to their very short channel lengths. The present study shows that the performance of p‐type VOFETs with pentacene as an active material can be significantly enhanced by the addition of the common p‐dopant C₆₀F₃₆ as a thin injection layer underneath the VOFET source electrode, resulting in an increase of On‐state current and On/Off ratio by one order of magnitude. The present study further investigates mixed injection layers of pentacene and the p‐dopant and finds that the improvement is less pronounced than for the pure dopant layers and depends on the concentration of dopant molecules in the injection layer. Through application of the transfer length method to equivalent OFET geometries, the present study is finally able to link the observed improvement to a decrease in transfer length and can thus conclude that this length is a crucial parameter onto which further improvement efforts have to be concentrated to realize true short‐channel VOFETs.     

Electrical Double‐Slope Nonideality in Organic Field‐Effect Transistors

The field effect transistor (FET) is arguably one of the most important circuit elements in modern electronics. Recently, a need has developed for flexible electronics in a variety of emerging applications. Examples include form‐fitting healthcare‐monitoring devices, flexible displays, and flexible radio frequency identification tags. Organic FETs (OFETs) are viable candidates for producing such flexible devices because they incorporate semiconducting π‐conjugated materials, including small molecules and conjugated polymers, which are intrinsically soft and mechanically compatible with flexible substrates. For OFETs to be industrially viable, however, they must achieve not only high charge carrier mobility, but also ideal and comprehensible electrical characteristics. Most recently, nonideal double‐slope characteristics in the transfer curves of OFETs (i.e., high slope at low gate voltage and low slope at high gate voltage), have stirred debate, which has led to different mechanistic rationales in the literature. This review focuses on the general observations, mechanistic understanding, and possible solutions associated with phenomena that result in FETs with double‐slope characteristics. By surveying and systematically summarizing in a single source relevant literature that deals with the issue of double slope, the experimental framework and theoretical basis for interpreting and avoiding this electrical nonideality in OFETs is provided.     

Ambipolar Organic Field‐Effect Transistors from Cross‐Conjugated Aromatic Quaterthiophenes; Comparisons with Quinoidal Parent Materials

This contribution presents an electrochemical, Raman spectroscopic, and theoretical study probing the differences in molecular and electronic structure of two quinoidal oligothiophenes (3′,4′‐dibutyl‐5,5″‐bis(dicyanomethylene)‐5,5″‐dihydro‐2,2′:5′,2″‐terthiophene and 5,5′‐bis(dicyanomethylene)‐3‐hexyl‐2,5‐dihydro‐4,4′‐dihexyl‐2,2′,5,5′‐tetrahydro‐tetrathiophene) with terminal tetracyanomethylene functionalization and aromatic oligothiophenes where acceptor moieties are positioned at lateral positions along the conjugated chain (6,6′‐dibutylsulfanyl‐[2,2′‐bi‐[4‐dicyanovinylene‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene]). In this way, the consequences of linear and cross conjugation are compared and contrasted. From this analysis, it is apparent that organic field‐effect transistors fabricated with cross‐conjugated tetrathiophene semiconductors should combine the benefits of an electron‐donor aromatic chain with strongly electron‐accepting tetracyanomethylene substituents. The corresponding organic field‐effect transistors exhibit ambipolar transport with rather similar hole and electron mobilities. Moreover, n‐channel conduction is enhanced to yield one of the highest electron mobilities found to date for this type of material.     

ReS2‐Based Field‐Effect Transistors and Photodetectors

Atomically thin 2D layered transition metal dichalcogenides (TMDs) have been extensively studied in recent years because of their appealing electrical and optical properties. Here, the fabrication of ReS₂ field‐effect transistors is reported via the encapsulation of ReS₂ nanosheets in a high‐κ Al₂O₃ dielectric environment. Low‐temperature transport measurements allow to observe a direct metal‐to‐insulator transition originating from strong electron–electron interactions. Remarkably, the photodetectors based on ReS₂ exhibit gate‐tunable photoresponsivity up to 16.14 A W^?1 and external quantum efficiency reaching 3168%, showing a competitive device performance to those reported in graphene, MoSe₂, GaS, and GaSe‐based photodetectors. This study unambiguously distinguishes ReS₂ as a new candidate for future applications in electronics and optoelectronics.     

Biocompatible and Biodegradable Materials for Organic Field‐Effect Transistors

Biocompatible‐ingestible electronic circuits and capsules for medical diagnosis and monitoring are currently based on traditional silicon technology. Organic electronics has huge potential for developing biodegradable, biocompatible, bioresorbable, or even metabolizable products. An ideal pathway for such electronic devices involves fabrication with materials from nature, or materials found in common commodity products. Transistors with an operational voltage as low as 4–5 V, a source drain current of up to 0.5 μA and an on‐off ratio of 3–5 orders of magnitude have been fabricated with such materials. This work comprises steps towards environmentally safe devices in low‐cost, large volume, disposable or throwaway electronic applications, such as in food packaging, plastic bags, and disposable dishware. In addition, there is significant potential to use such electronic items in biomedical implants.     

Sensing of Alkylating Agents Using Organic Field‐Effect Transistors

Alkylating agents are simple and reactive molecules that are commonly used in many and diverse fields, such as organic synthesis, medicine, and agriculture. Some highly reactive alkylating species are also being used as blister chemical warfare agents. The detection and identification of alkylating agent is not a trivial issue because of their high reactivity and simple structure. Here, a novel polythiophene derivative that is capable of reacting with alkylating agents is reported, along with its application in direct electrical sensing of alkylators using an organic field‐effect transistor, OFET, device. Upon reacting with alkylators, the OFET containing the new polythiophene analogue as its channel becomes conductive, and the gate effect is lost; this is in marked contrast to the response of the OFET to “innocent” vapors, such as alcohols and acetone. By following the drain–source current under gate bias, one can easily follow the processes of absorption of the analyte to the polythiophene channel and their subsequent reaction.     

Insulator Polarization Mechanisms in Polyelectrolyte‐Gated Organic Field‐Effect Transistors

Electrolyte‐gated organic field‐effect transistors (OFETs) hold promise for robust printed electronics operating at low voltages. The polarization mechanism of thin solid electrolyte films, the gate insulator in such OFETs, is still unclear and appears to limit the transient current characteristics of the transistors. Here, the polarization response of a thin proton membrane, a poly(styrenesulfonic acid) film, is controlled by varying the relative humidity. The formation of the conducting transistor channel follows the polarization of the polyelectrolyte, such that the drain transient current characteristics versus the time are rationalized by three different polarization mechanisms: the dipolar relaxation at high frequencies, the ionic relaxation (migration) at intermediate frequencies, and the electric double‐layer formation at the polyelectrolyte interfaces at low frequencies. The electric double layers of polyelectrolyte capacitors are formed in ～1 µs at humid conditions and an effective capacitance per area of 10 µF cm^?2 is obtained at 1 MHz, thus suggesting that this class of OFETs might operate at up to 1 MHz at 1 V.     

High Performance p‐ and n‐Type Light‐Emitting Field‐Effect Transistors Employing Thermally Activated Delayed Fluorescence

Light‐emitting field‐effect transistors (LEFETs) are an emerging type of devices that combine light‐emitting properties with logical switching function. One of the factors limiting their efficiency stems from the spin statistics of electrically generated excitons. Only 25% of them, short lived singlet states, are capable of light emission, with the other 75% being long lived triplet states that are wasted as heat due to spin‐forbidden processes. Traditionally, the way to overcome this limitation is to use phosphorescent materials as additional emission channel harnessing the triplet excitons. Here, an alternative strategy for triplet usage in LEFETs in the form of thermally activated delayed fluorescence (TADF) is presented. Devices employing a TADF capable material, 4CzIPN (2,4,5,6‐tetra[9H‐carbazol‐9‐yl]isophthalonitrile), in both n‐type and p‐type configurations are shown. They manifest excellent electrical characteristics, consistent brightness in the range of 100–1,000 cd m^‐2 and external quantum efficiency (EQE) of up to 0.1%, which is comparable to the equivalent organic light‐emitting diode (OLED) based on the same materials. Simulation identifies the poor light out‐coupling as the main reason for lower than expected EQEs. Transmission measurements show it can be partially alleviated using a more transparent top contact, however more structural optimization is needed to tap the full potential of the device.     

Star‐Shaped Oligothiophenes for Solution‐Processible Organic Field‐Effect Transistors

We have designed and successfully synthesized star‐shaped oligothiophenes, which could be used as semiconducting materials for solution‐processible organic field‐effect transistors (FETs). By systematically changing the chemical structure of the star‐shaped oligothiophenes we obtained the structural requirements needed for making working FETs from them. UV‐vis fluorescence measurements showed that a molecule of the star‐shaped compounds under consideration is not a fully conjugated molecule, but it has three independently conjugated oligothienyl‐phenylene blocks. A possible scheme of molecular packing of the star‐shaped oligothiophenes in a lamellar structure was proposed and confirmed by atomic force microscopy (AFM) and X‐ray diffraction (XRD) measurements. Although the star‐shaped semiconductors show a somewhat lower mobility than their linear analogs, they possess better solubility and film‐forming properties, leading to improved spin‐coating processing. The best FETs were made by spin‐coating 1,3,5‐tris(5″‐decyl‐2,2′:5′,2″‐terthien‐5‐yl)benzene from a chloroform solution, which resulted in a mobility of 2 × 10^–4 cm² V ^–1s^–1, a 10² on/off ratio at gate voltages of 0 V and –20 V, and a threshold voltage close to 0 V.     

Ionic‐Liquid Gating of InAs Nanowire‐Based Field‐Effect Transistors

Here, the operation of a field‐effect transistor based on a single InAs nanowire gated by an ionic liquid is reported. Liquid gating yields very efficient carrier modulation with a transconductance value 30 times larger than standard back gating with the SiO₂/Si₊₊ substrate. Thanks to this wide modulation, the controlled evolution from semiconductor to metallic‐like behavior in the nanowire is shown. This work provides the first systematic study of ionic‐liquid gating in electronic devices based on individual III–V semiconductor nanowires: this architecture opens the way to a wide range of fundamental and applied studies from the phase transitions to bioelectronics.