2D Porous Carbons prepared from Layered Organic–Inorganic Hybrids and their Use as Oxygen‐Reduction Electrocatalysts

2D porous carbon nanomaterials have attracted tremendous attention in different disciplines especially for electrochemical catalysis. The significant advantage of such 2D materials is that nearly all their surfaces are exposed to the electrolyte and can take part in the electrochemical reaction. Here, a versatile active‐salt‐templating strategy to efficiently synthesize 2D porous carbon nanosheets from layered organic–inorganic hybrids is presented. The resulting heteroatom‐doped carbon nanosheets (NFe/CNs) exhibit exceptional performance for the oxygen‐reduction reaction and in Zn–air battery electrodes. The activity of the best catalyst within a series of NFe/CNs exceeds the performance of conventional carbon‐supported Pt catalysts in terms of onset potential (0.930 vs 0.915 V of Pt/C), half‐wave potential (0.859 vs 0.816 V of Pt/C), long‐time stability, and methanol tolerance. Also, when applied as a cathode catalyst in a zinc–air battery the NFe/CNs presented here outperform commercial Pt/C catalysts.     

Intrinsic Carbon‐Defect‐Driven Electrocatalytic Reduction of Carbon Dioxide

Heteroatom‐doped carbon catalysts are currently attracting enormous attention due to their excellent performance for the electrocatalytic carbon dioxide reduction reaction (ECRR). However, the origin of the high catalytic activities of doped‐carbon materials remains obscure with the role of intrinsic carbon defects in promoting the ECRR receiving little attention despite the abundance of carbon defects in all carbon‐based catalytic materials. Herein, a positive correlation is reported between the ECRR performance of carbon‐based catalysts and the content of intrinsic carbon defects contained within these catalysts. Further, it is demonstrated that defective porous carbon catalysts containing no active heteroatom dopants also show excellent catalytic performance for ECRR. C K‐edge near edge X‐ray absorption fine structure measurements and density functional theory calculations reveal that sp² defects (octagonal and pentagonal) rather than edge defects are key to the excellent ECRR activity of the defective porous carbon catalysts. This work thus makes an important contribution to the understanding of the origin of the ECRR activity of carbon‐based catalysts, with heteroatom doping perhaps being less important than previously envisaged for achieving a high ECRR performance.     

Defective N/S‐Codoped 3D Cheese‐Like Porous Carbon Nanomaterial toward Efficient Oxygen Reduction and Zn–Air Batteries

Developing a facile and cost‐efficient method to synthesize carbon‐based nanomaterials possessing excellent structural and functional properties has become one of the most attractive topics in energy conversion and storage fields. In this study, density functional theory calculation results reveal the origin of high oxygen reduction reaction (ORR) activity predominantly derived from the synergistic effect of intrinsic defects and heteroatom dopants (e.g., N, S) that modulate the bandgap and charge density distribution of carbon matrix. Under the guidance of the first‐principle prediction, by using ultralight biomass waste as precursor of C, N, and S elements, a defect‐rich and N/S dual‐doped cheese‐like porous carbon nanomaterial is successfully designed and constructed. Herein, the intrinsic defects are artfully generated in terms of alkaline and ammonia activation. The electrochemical measurements display that such a material owns a comparable ORR activity (E_1/2 = 0.835 V) to the commercial Pt/C catalyst, along with splendid durability and methanol tolerance in alkali media. Furthermore, as cathode catalyst, it displays a high Zn–air battery performance. The excellent ORR activity of the catalyst can be attributed to its unique 3D porous architecture, abundant intrinsic defects, and high‐content active heteroatom dopants in the carbon matrix.     

Molybdenum Carbide‐Decorated Metallic Cobalt@Nitrogen‐Doped Carbon Polyhedrons for Enhanced Electrocatalytic Hydrogen Evolution

Electrocatalytic hydrogen evolution reaction (HER) based on water splitting holds great promise for clean energy technologies, in which the key issue is exploring cost‐effective materials to replace noble metal catalysts. Here, a sequential chemical etching and pyrolysis strategy are developed to prepare molybdenum carbide‐decorated metallic cobalt@nitrogen‐doped porous carbon polyhedrons (denoted as Mo/Co@N–C) hybrids for enhanced electrocatalytic hydrogen evolution. The obtained metallic Co nanoparticles are coated by N‐doped carbon thin layers while the formed molybdenum carbide nanoparticles are well‐dispersed in the whole Co@N–C frames. Benefiting from the additionally implanted molybdenum carbide active sites, the HER performance of Mo/Co@N–C hybrids is significantly promoted compared with the single Co@N–C that is derived from the pristine ZIF‐67 both in alkaline and acidic media. As a result, the as‐synthesized Mo/Co@N–C hybrids exhibit superior HER electrocatalytic activity, and only very low overpotentials of 157 and 187 mV are needed at 10 mA cm^?2 in 1 m KOH and 0.5 m H₂SO₄, respectively, opening a door for rational design and fabrication of novel low‐cost electrocatalysts with hierarchical structures toward electrochemical energy storage and conversion.     

Heteroatom‐Containing Porous Carbons Derived from Ionic Liquid‐Doped Alkali Organic Salts for Supercapacitors

A simple strategy for the synthesis of heteroatom‐doped porous carbon materials (CMs) via using ionic liquid (IL)‐doped alkali organic salts as small molecular precursors is developed. Doping of alkali organic salts (such as sodium glutamate, sodium tartrate, and sodium citrate) with heteroatoms containing ILs (including 1‐butyl‐3‐methylimidazolium chlorine and 3‐butyl‐4‐methythiazolebromination) not only incorporates the heteroatoms into the carbon frameworks but also highly improves the carbonization yield, as compared with that of either alkali organic salts or ILs as precursors. The porous structure of CMs can be tuned by adjusting the feed ratio of ILs. The porous CMs derived from 1‐butyl‐3‐methylimidazolium chlorine‐doped sodium glutamate exhibit high charge storage capacity with a specific capacitance of 287 F g^?1 and good stability over 5000 cycles in 6 m KOH at a current density of 1 A g^?1 for supercapacitors. This strategy opens a simple and efficient method for the synthesis of heteroatom‐doped porous CMs.     

Ultrathin Nitrogen‐Doped Carbon Layer Uniformly Supported on Graphene Frameworks as Ultrahigh‐Capacity Anode for Lithium‐Ion Full Battery

The designable structure with 3D structure, ultrathin 2D nanosheets, and heteroatom doping are considered as highly promising routes to improve the electrochemical performance of carbon materials as anodes for lithium‐ion batteries. However, it remains a significant challenge to efficiently integrate 3D interconnected porous frameworks with 2D tunable heteroatom‐doped ultrathin carbon layers to further boost the performance. Herein, a novel nanostructure consisting of a uniform ultrathin N‐doped carbon layer in situ coated on a 3D graphene framework (NC@GF) through solvothermal self‐assembly/polymerization and pyrolysis is reported. The NC@GF with the nanosheets thickness of 4.0 nm and N content of 4.13 at% exhibits an ultrahigh reversible capacity of 2018 mA h g^?1 at 0.5 A g^?1 and an ultrafast charge–discharge feature with a remarkable capacity of 340 mA h g^?1 at an ultrahigh current density of 40 A g^?1 and a superlong cycle life with a capacity retention of 93% after 10 000 cycles at 40 A g^?1. More importantly, when coupled with LiFePO₄ cathode, the fabricated lithium‐ion full cells also exhibit high capacity and excellent rate and cycling performances, highlighting the practicability of this NC@GF.     

MOF‐Derived Bifunctional Cu3P Nanoparticles Coated by a N,P‐Codoped Carbon Shell for Hydrogen Evolution and Oxygen Reduction

Metal–organic frameworks (MOFs) have recently emerged as a type of uniformly and periodically atom‐distributed precursor and efficient self‐sacrificial template to fabricate hierarchical porous‐carbon‐related nanostructured functional materials. For the first time, a Cu‐based MOF, i.e., Cu‐NPMOF is used, whose linkers contain nitrogen and phosphorus heteroatoms, as a single precursor and template to prepare novel Cu₃P nanoparticles (NPs) coated by a N,P‐codoped carbon shell that is extended to a hierarchical porous carbon matrix with identical uniform N and P doping (termed Cu₃P@NPPC) as an electrocatalyst. Cu₃P@NPPC demonstrates outstanding activity for both the hydrogen evolution and oxygen reduction reaction, representing the first example of a Cu₃P‐based bifunctional catalyst for energy‐conversion reactions. The high performances are ascribed to the high specific surface area, the synergistic effects of the Cu₃P NPs with intrinsic activity, the protection of the carbon shell, and the hierarchical porous carbon matrix doped by multiheteroatoms. This strategy of using a diverse MOF as a structural and compositional material to create a new multifunctional composite/hybrid may expand the opportunities to explore highly efficient and robust non‐noble‐metal catalysts for energy‐conversion reactions.     

Plasma Treatment for Nitrogen‐Doped 3D Graphene Framework by a Conductive Matrix with Sulfur for High‐Performance Li–S Batteries

Carbon materials have received considerable attention as host cathode materials for sulfur in lithium–sulfur batteries; N‐doped carbon materials show particularly high electrocatalytic activity. Efforts are made to synthesize N‐doped carbon materials by introducing nitrogen‐rich sources followed by sintering or hydrothermal processes. In the present work, an in situ hollow cathode discharge plasma treatment method is used to prepare 3D porous frameworks based on N‐doped graphene as a potential conductive matrix material. The resulting N‐doped graphene is used to prepare a 3D porous framework with a S content of 90 wt% as a cathode in lithium–sulfur cells, which delivers a specific discharge capacity of 1186 mAh g^?1 at 0.1 C, a coulombic efficiency of 96% after 200 cycles, and a capacity retention of 578 mAh g^?1 at 1.0 C after 1000 cycles. The performance is attributed to the flexible 3D structure and clustering of pyridinic N‐dopants in graphene. The N‐doped graphene shows high electrochemical performance and the flexible 3D porous stable structure accommodates the considerable volume change of the active material during lithium insertion and extraction processes, improving the long‐term electrochemical performance.     

Nanostructured Metal‐Free Electrochemical Catalysts for Highly Efficient Oxygen Reduction

Replacing precious and nondurable Pt catalysts with cheap and commercially available materials to facilitate sluggish cathodic oxygen reduction reaction (ORR) is a key issue in the development of fuel cell technology. The recently developed cost effective and highly stable metal‐free catalysts reveal comparable catalytic activity and significantly better fuel tolerance than that of current Pt‐based catalysts; therefore, they can serve as feasible Pt alternatives for the next generation of ORR electrocatalysts. Their promising electrocatalytic properties and acceptable costs greatly promote the R&D of fuel cell technology. This review provides an overview of recent advances in state‐of‐the‐art nanostructured metal‐free electrocatalysts including nitrogen‐doped carbons, graphitic‐carbon nitride (g‐C₃N₄)‐based hybrids, and 2D graphene‐based materials. A special emphasis is placed on the molecular design of these electrocatalysts, origin of their electrochemical reactivity, and ORR pathways. Finally, some perspectives are highlighted on the development of more efficient ORR electrocatalysts featuring high stability, low cost, and enhanced performance, which are the key factors to accelerate the commercialization of fuel cell technology.     

Electrocatalytic N‐Doped Graphitic Nanofiber – Metal/Metal Oxide Nanoparticle Composites

Carbon‐based nanocomposites have shown promising results in replacing commercial Pt/C as high‐performance, low cost, nonprecious metal‐based oxygen reduction reaction (ORR) catalysts. Developing unique nanostructures of active components (e.g., metal oxides) and carbon materials is essential for their application in next generation electrode materials for fuel cells and metal–air batteries. Herein, a general approach for the production of 1D porous nitrogen‐doped graphitic carbon fibers embedded with active ORR components, (M/MO_x, i.e., metal or metal oxide nanoparticles) using a facile two‐step electrospinning and annealing process is reported. Metal nanoparticles/nanoclusters nucleate within the polymer nanofibers and subsequently catalyze graphitization of the surrounding polymer matrix and following oxidation, create an interconnected graphite–metal oxide framework with large pore channels, considerable active sites, and high specific surface area. The metal/metal oxide@N‐doped graphitic carbon fibers, especially Co₃O₄, exhibit comparable ORR catalytic activity but superior stability and methanol tolerance versus Pt in alkaline solutions, which can be ascribed to the synergistic chemical coupling effects between Co₃O₄ and robust 1D porous structures composed of interconnected N‐doped graphitic nanocarbon rings. This finding provides a novel insight into the design of functional electrocatalysts using electrospun carbon nanomaterials for their application in energy storage and conversion fields.     

Silk‐Derived 2D Porous Carbon Nanosheets with Atomically‐Dispersed Fe‐Nx‐C Sites for Highly Efficient Oxygen Reaction Catalysts

Controlled synthesis of highly efficient, stable, and cost‐effective oxygen reaction electrocatalysts with atomically‐dispersed Me–N_x–C active sites through an effective strategy is highly desired for high‐performance energy devices. Herein, based on regenerated silk fibroin dissolved in ferric chloride and zinc chloride aqueous solution, 2D porous carbon nanosheets with atomically‐dispersed Fe–N_x–C active sites and very large specific surface area (≈2105 m² g^?1) are prepared through a simple thermal treatment process. Owing to the 2D porous structure with large surface area and atomic dispersion of Fe–N_x–C active sites, the as‐prepared silk‐derived carbon nanosheets show superior electrochemical activity toward the oxygen reduction reaction with a half‐wave potential (E_1/2) of 0.853 V, remarkable stability with only 11 mV loss in E_1/2 after 30 000 cycles, as well as good catalytic activity toward the oxygen evolution reaction. This work provides a practical and effective approach for the synthesis of high‐performance oxygen reaction catalysts towards advanced energy materials.     

Nitrogen Codoped Unique Carbon with 0.4 nm Ultra‐Micropores for Ultrahigh Areal Capacitance Supercapacitors

A full understanding of ion transport in porous carbon electrodes is essential for achieving effective energy storage in their applications as electrochemical supercapacitors. It is generally accepted that pores in the size range below 0.5 nm are inaccessible to electrolyte ions and lower the capacitance of carbon materials. Here, nitrogen‐doped carbon with ultra‐micropores smaller than 0.4 nm with a narrow size distribution, which represents the first example of electrode materials made entirely from ultra‐microporous carbon, is prepared. An in situ electrochemical quartz crystal microbalance technique to study the effects of the ultra‐micropores on charge storage in supercapacitors is used. It is found that ultra‐micropores smaller than 0.4 nm are accessible to small electrolyte ions, and the area capacitance of obtained sample reaches the ultrahigh value of 330 µF cm^?2, significantly higher than that of previously reported carbon‐based materials. The findings provide a better understanding of the correlation between ultra‐micropore structure and capacitance and open new avenues for design and development of carbon materials for the next generation of high energy density supercapacitors.     

Design Nitrogen (N) and Sulfur (S) Co‐Doped 3D Graphene Network Architectures for High‐Performance Sodium Storage

To develop high‐performance sodium‐ion batteries (NIBs), electrodes should possess well‐defined pathways for efficient electronic/ionic transport. In this work, high‐performance NIBs are demonstrated by designing a 3D interconnected porous structure that consists of N, S co‐doped 3D porous graphene frameworks (3DPGFs‐NS). The most typical electrode materials (i.e., Na₃V₂(PO₄)₃ (NVP), MoS₂, and TiO₂) are anchored onto the 3DPGFs‐NS matrix (denoted as NVP@C@3DPGFs‐NS; MoS₂@C@3DPGFs‐NS and TiO₂@C@3DPGFs‐NS) to demonstrate its general process to boost the energy density of NIBs. The N, S co‐doped porous graphene structure with a large surface area offers fast ionic transport within the electrode and facilitates efficient electron transport, and thus endows the 3DPGFs‐NS‐based composite electrodes with excellent sodium storage performance. The resulting NVP@C@3DPGFs‐NS displays excellent electrochemical performance as both cathode and anode for NIBs. The MoS₂@C@3DPGFs‐NS and TiO₂@C@3DPGFs‐NS deliver capacities of 317 mAhg^?1 at 5 Ag^?1 after 1000 cycles and 185 mAhg^?1 at 1 Ag^?1 after 2000 cycles, respectively. The excellent long cycle life is attributed to the 3D porous structure that could greatly release mechanical stress from repeated Na⁺ extraction/insertion. The novel structure 3D PGFs‐NS provides a general approach to modify electrodes of NIBs and holds great potential applications in other energy storage fields.     

Efficient Metal‐Free Electrocatalysts from N‐Doped Carbon Nanomaterials: Mono‐Doping and Co‐Doping

N‐doped carbon nanomaterials have rapidly grown as the most important metal‐free catalysts in a wide range of chemical and electrochemical reactions. This current report summarizes the latest advances in N‐doped carbon electrocatalysts prepared by N mono‐doping and co‐doping with other heteroatoms. The structure–performance relationship of these materials is subsequently rationalized and perspectives on developing more efficient and sustainable electrocatalysts from carbon nanomaterials are also suggested.     

Metal‐Free Carbon Materials for CO2 Electrochemical Reduction

The rapid increase of the CO₂ concentration in the Earth's atmosphere has resulted in numerous environmental issues, such as global warming, ocean acidification, melting of the polar ice, rising sea level, and extinction of species. To search for suitable and capable catalytic systems for CO₂ conversion, electrochemical reduction of CO₂ (CO₂RR) holds great promise. Emerging heterogeneous carbon materials have been considered as promising metal‐free electrocatalysts for the CO₂RR, owing to their abundant natural resources, tailorable porous structures, resistance to acids and bases, high‐temperature stability, and environmental friendliness. They exhibit remarkable CO₂RR properties, including catalytic activity, long durability, and high selectivity. Here, various carbon materials (e.g., carbon fibers, carbon nanotubes, graphene, diamond, nanoporous carbon, and graphene dots) with heteroatom doping (e.g., N, S, and B) that can be used as metal‐free catalysts for the CO₂RR are highlighted. Recent advances regarding the identification of active sites for the CO₂RR and the pathway of reduction of CO₂ to the final product are comprehensively reviewed. Additionally, the emerging challenges and some perspectives on the development of heteroatom‐doped carbon materials as metal‐free electrocatalysts for the CO₂RR are included.     

Recent Progress in Metal‐Free Covalent Organic Frameworks as Heterogeneous Catalysts

Covalent organic frameworks (COFs), connecting different organic units into one system through covalent bonds, are crystalline organic porous materials with 2D or 3D networks. Compared with conventional porous materials such as inorganic zeolite, active carbon, and metal‐organic frameworks, COFs are a new type of porous materials with well‐designed pore structure, high surface area, outstanding stability, and easy functionalization at the molecular level, which have attracted extensive attention in various fields, such as energy storage, gas separation, sensing, photoluminescence, proton conduction, magnetic properties, drug delivery, and heterogeneous catalysis. Herein, the recent advances in metal‐free COFs as a versatile platform for heterogeneous catalysis in a wide range of chemical reactions are presented and the synthetic strategy and promising catalytic applications of COF‐based catalysts (including photocatalysis) are summarized. According to the types of catalytic reactions, this review is divided into the following five parts for discussion: achiral organic catalysis, chiral organic conversion, photocatalytic organic reactions, photocatalytic energy conversion (including water splitting and the reduction of carbon dioxide), and photocatalytic pollutant degradation. Furthermore, the remaining challenges and prospects of COFs as heterogeneous catalysts are also presented.     

Bio‐Derived Co2P Nanoparticles Supported on Nitrogen‐Doped Carbon as Promising Oxygen Reduction Reaction Electrocatalyst for Anion Exchange Membrane Fuel Cells

Recently, nonnoble‐metal catalysts such as a metal coordinated to nitrogen doped in a carbon matrix have been reported to exhibit superior oxygen reduction reaction (ORR) activity in alkaline media. In this work, Co₂P nanoparticles supported on heteroatom‐doped carbon catalysts (NBSCP) are developed with an eco‐friendly synthesis method using bean sprouts. NBSCP can be easily synthesized through metal precursor absorption and carbonization at a high temperature. It shows a very large specific surface area with various dopants such as nitrogen, phosphorus, and sulfur derived from small organic molecules. The catalyst can exhibit activity in various electrochemical reactions. In particular, excellent performance is noted for the ORR. Compared to the commercial Pt/C, NBSCP exhibits a lower onset potential, higher current density, and superior durability. This excellent ORR activity and durability is attributable to the synergistic effect between Co₂P nanoparticles and nitrogen‐doped carbon. In addition, superior performance is noted on applying NBSCP to a practical anion exchange membrane fuel cell system. Through this work, the possibility of applying an easily obtained bio‐derived material to energy conversion and storage systems is demonstrated.     

Sugar Blowing‐Induced Porous Cobalt Phosphide/Nitrogen‐Doped Carbon Nanostructures with Enhanced Electrochemical Oxidation Performance toward Water and Other Small Molecules

Rational design of high active and robust nonprecious metal catalysts with excellent catalytic efficiency in oxygen evolution reaction (OER) is extremely vital for making the water splitting process more energy efficient and economical. Among these noble metal‐free catalysts, transition‐metal‐based nanomaterials are considered as one of the most promising OER catalysts due to their relatively low‐cost intrinsic activities, high abundance, and diversity in terms of structure and morphology. Herein, a facile sugar‐blowing technique and low‐temperature phosphorization are reported to generate 3D self‐supported metal involved carbon nanostructures, which are termed as Co₂P@Co/nitrogen‐doped carbon (Co₂P@Co/N‐C). By capitalizing on the 3D porous nanostructures with high surface area, homogeneously dispersed active sites, the intimate interaction between active sites, and 3D N‐doped carbon, the resultant Co₂P@Co/N‐C exhibits satisfying OER performance superior to CoO@Co/N‐C, delivering 10 mA cm^?2 at overpotential of 0.32 V. It is worth noting that in contrast to the substantial current density loss of RuO₂, Co₂P@Co/N‐C shows much enhanced catalytic activity during the stability test and a 1.8‐fold increase in current density is observed after stability test. Furthermore, the obtained Co₂P@Co/N‐C can also be served as an excellent nonprecious metal catalyst for methanol and glucose electrooxidation in alkaline media, further extending their potential applications.     

An Efficient Cobalt Phosphide Electrocatalyst Derived from Cobalt Phosphonate Complex for All‐pH Hydrogen Evolution Reaction and Overall Water Splitting in Alkaline Solution

The development of low‐cost and highly efficient electrocatalysts via an eco‐friendly synthetic method is of great significance for future renewable energy storage and conversion systems. Herein, cobalt phosphides confined in porous P‐doped carbon materials (Co‐P@PC) are fabricated by calcinating the cobalt‐phosphonate complex formed between 1‐hydroxyethylidenediphosphonic acid and Co(NO₃)₂ in alkaline solution. The P‐containing ligand in the complex acts as the carbon source as well as in situ phosphorizing agent for the formation of cobalt phosphides and doping P element into carbon material upon calcination. The Co‐P@PC exhibits high activity for all‐pH hydrogen evolution reaction (overpotentials of 72, 85, and 76 mV in acidic, neutral, and alkaline solutions at the current density of 10 mA cm^?2) and oxygen evolution reaction in alkaline solution (an overpotential of 280 mV at the current density of 10 mA cm^?2). The alkaline electrolyzer assembled from the Co‐P@PC electrodes delivers the current density of 10 mA cm^?2 at the voltage of 1.60 V with a durability of 60 h. The excellent activity and long‐term stability of the Co‐P@PC derives from the synergistic effect between the active cobalt phosphides and the porous P‐doped carbon matrix.     

Low‐Temperature Carbide‐Mediated Growth of Bicontinuous Nitrogen‐Doped Mesoporous Graphene as an Efficient Oxygen Reduction Electrocatalyst

Nitrogen‐doped graphene exhibits high electrocatalytic activity toward the oxygen reduction reaction (ORR), which is essential for many renewable energy technologies. To maximize the catalytic efficiency, it is desirable to have both a high concentration of robust nitrogen dopants and a large accessible surface of the graphene electrodes for rapid access of oxygen to the active sites. Here, 3D bicontinuous nitrogen‐doped mesoporous graphene synthesized by a low‐temperature carbide‐mediated graphene‐growth method is reported. The mesoporous graphene has a mesoscale pore size of ≈25 nm and large specific surface area of 1015 m² g^?1, which can effectively host and stabilize a high concentration of nitrogen dopants. Accordingly, it shows an excellent electrocatalytic activity toward the ORR with an efficient four‐electron‐dominated pathway and high durability in alkaline media. The synthesis route developed herein provides a new economic approach to synthesize bicontinuous porous graphene materials with tunable characteristic length, porosity, and chemical doping as high efficiency electrocatalysts for a wide range of electrochemical reactions.