The Development of Yolk–Shell‐Structured Pd&ZnO@Carbon Submicroreactors with High Selectivity and Stability

Design of multicomponent yolk–shell structures is crucial for the fabrication of micro/nanoreactors for a variety of applications. This work reports the rational design and synthesis of yolk–shell‐structured submicroreactors with loaded metal nanoparticles into ZnO–microporous carbon core–shell structures. The solvothermal treatment and carbonization process of uniform zeolitic imidazolate framework‐8 (ZIF‐8)@resin polymer core–shell structures leads to the generation of yolk–shell‐structured ZnO@carbon. The synthesis conditions are optimized to track the evolution of ZIF‐8 in a confined space of resin polymer as a submicroreactor itself. It is found that nanoribbon evolution occurs via the formation of the intermediate needle‐like particles. The Pd&ZnO@carbon submicroreactor is shown to be a highly selective catalyst (selectivity >99%) for hydrogenation of phenylacetylene to phenylethylene. The excellent performance of Pd&ZnO@carbon particles is evidenced by higher conversion and selectivity than that of Pd/ZnO and Pd/C with similar Pd loading. Furthermore, Pd&ZnO@carbon submicroreactors show superior catalytic stability, and no deactivation after 25 h of reaction. The proposed strategy is promising for the design of multifunctional micro/nanoreactors or nanocontainers for construction of artificial cells.     

Yolk–Shell Hybrid Materials with a Periodic Mesoporous Organosilica Shell: Ideal Nanoreactors for Selective Alcohol Oxidation

This contribution describes the preparation of multifunctional yolk–shell nanoparticles (YSNs) consisting of a core of silica spheres and an outer shell based on periodic mesoporous organosilica (PMO) with perpendicularly aligned mesoporous channels. The new yolk–shell hybrid materials were synthesised through a dual mesophase and vesicle soft templating method. The mesostructure of the shell, the dimension of the hollow space (4～52 nm), and the shell thickness (16～34 nm) could be adjusted by precise tuning of the synthesis parameters, as evidenced by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and nitrogen sorption investigations. Various metal nanoparticles (e.g., Au, Pt, and Pd) were encapsulated and confined in the void space between the core and the shell using impregnation and reduction of adequate metal precursors. The selective oxidation of various alcohol substrates was then carried out to illustrate the benefits of such an architecture in catalysis. High conversion (～100%) and excellent selectivity (～99%) were obtained over Pd nanoparticles encapsulated in the hybrid PMO yolk–shell structures.     

Novel Au–SiO2–WO3 Core–Shell Composite Nanoparticles for Surface‐Enhanced Raman Spectroscopy with Potential Application in Cancer Cell Imaging

With the rapid development of nanotechnology during the last decades, the ability to detect and control individual objects at the nanoscale has enabled us to deal with complex biomedical challenges. In cancer imaging, novel nanoparticles (NPs) offer promising potential to identify single cancer cells and precisely label larger areas of cancer tissues. Herein, a new class of size tunable core–shell composite (Au–SiO₂–WO₃) nanoparticles is reported. These nanoparticles display an easily improvable ≈10³ surface‐enhanced Raman scattering (SERS) enhancement factor with a double Au shell for dried samples over Si wafers and several orders of magnitude for liquid samples. WO₃ core nanoparticles measuring 20–50 nm in diameter are sheathed by an intermediate 10–60 nm silica layer, produced by following the Stöber‐based process and Turkevich method, followed by a 5–20 nm thick Au outer shell. By attaching 4‐mercaptobenzoic acid (4‐MBA) molecules as Raman reporters to the Au, high‐resolution Raman maps that pinpoint the nanoparticles' location are obtained. The preliminary results confirm their advantageous SERS properties for single‐molecule detection, significant cell viability after 24 h and in vitro cell imaging using coherent anti‐stokes Raman scattering. The long‐term objective is to measure SERS nanoparticles in vivo using near‐infrared light.     

Triplex Au–Ag–C Core–Shell Nanoparticles as a Novel Raman Label

Monodispersed, readily‐grafted, and biocompatible surface‐enhanced Raman spectroscopic (SERS) tagging materials are developed; they are composed of bimetallic Au@Ag nanoparticles (NPs) for optical enhancement, a reporter molecule for spectroscopic signature, and a carbon shell for protection and bioconjugation. A controllable and convenient hydrothermal synthetic route is presented to synthesize the layer‐by‐layer triplex Au–Ag–C core–shell NPs, which can incorporate the Raman‐active label 4‐mercapto benzoic acid (4‐MBA). The obtained gold seed–silver coated particles can be coated further with a thickness‐controlled carbon shell to form colloidal carbon‐encapsulated Au_core/Ag_shell spheres with a monodisperse size distribution. Furthermore, these SERS‐active spheres demonstrated interesting properties as a novel Raman tag for quantitative immunoassays. The results suggest such SERS tags can be used for multiplex and ultrasensitive detection of biomolecules as well as nontoxic, in vivo molecular imaging of animal or plant tissues.     

Novel Platinum–Cobalt Alloy Nanoparticles Dispersed on Nitrogen‐Doped Graphene as a Cathode Electrocatalyst for PEMFC Applications

A novel synthesis procedure is devised to obtain nitrogen‐doping in hydrogen‐exfoliated graphene (HEG) sheets. An anionic polyelectrolyte–conducting polymer duo is used to form a uniform coating of the polymer over graphene sheets. Pyrolysis of graphene coated with polypyrrole, a nitrogen‐containing polymer, in an inert environment leads to the incorporation of nitrogen atoms in the graphene network with simultaneous removal of the polymer. These nitrogen‐doped graphene (N‐HEG) sheets are used as catalyst support for dispersing platinum and platinum–cobalt alloy nanoparticles synthesized by the modified‐polyol reduction method, yielding a uniform dispersion of the catalyst nanoparticles. Compared to commercial Pt/C electrocatalyst, Pt–Co/N‐HEG cathode electrocatalyst exhibits four times higher power density in proton exchange membrane fuel cells, which is attributed to the excellent dispersion of Pt–Co alloy nanoparticles on the N‐HEG support, the alloying effect of Pt–Co, and the high electrocatalytic activity of the N‐HEG support. A stability study shows that Pt/N‐HEG and Pt–Co/N‐HEG cathode electrocatalysts are highly stable in acidic media. The study shows two promising electrocatalysts for proton exchange membrane fuel cells, which on the basis of performance and stability present the possibility of replacing contemporary electrocatalysts.     

Synthesis of Au–CdS Core–Shell Hetero‐Nanorods with Efficient Exciton–Plasmon Interactions

The synthesis of large lattice mismatch metal‐semiconductor core–shell hetero‐nanostructures remains challenging, and thus the corresponding optical properties are seldom discussed. Here, we report the gold‐nanorod‐seeded growth of Au–CdS core–shell hetero‐nanorods by employing Ag₂S as an interim layer that favors CdS shell formation through a cation‐exchange process, and the subsequent CdS growth, which can form complete core–shell structures with controllable shell thickness. Exciton–plasmon interactions observed in the Au–CdS nanorods induce shell thickness‐tailored and red‐shifted longitudinal surface plasmon resonance and quenched CdS luminescence under ultraviolet light excitation. Furthermore, the Au–CdS nanorods demonstrate an enhanced and plasmon‐governed two‐photon luminescence under near‐infrared pulsed laser excitation. The approach has potential for the preparation of other metal‐semiconductor hetero‐nanomaterials with complete core–shell structures, and these Au–CdS nanorods may open up intriguing new possibilities at the interface of optics and electronics.     

Facile Fabrication of Highly Dispersed Pd@Ag Core–Shell Nanoparticles Embedded in Spirulina platensis by Electroless Deposition and Their Catalytic Properties

Microorganisms are widely used as the biotemplates for producing micro/nanomaterials owing to their unique features, such as exquisite morphology, renewable, and environmentally friendly. However, mass intracellular synthesis of uniformly dispersed nanoparticles (NPs) inside microorganisms is still challenging, especially in a predictable and controllable manner. Here, a facile and efficiency strategy is proposed to controllably produce highly dispersed and surfactant‐free Pd@Ag core–shell NPs within the Spirulina platensis (Sp.) cells. In this approach, the Sp. cells' permeability is enhanced by the hydrochloric acid treatment first, which enables the Pd NPs penetrate the cell envelope and distribute uniformly inside the cells, and then they can work as the catalytic seeds for the following electroless silver deposition, resulting in the intracellular fabrication of Pd@Ag core–shell NPs with no agglomeration. The Pd@Ag NPs show excellent catalytic activity (turnover frequency is up to 2893 h^?1 for the 6.32 nm Pd@Ag NPs), good stability, and recyclability toward the 4‐nitrophenol reductions. The excellent properties are attributed to the asymmetrical core–shell structure, small size, and good dispersion of Pd@Ag NPs. Due to its facility, cost‐effectiveness, and versatility, this method can be expanded to other microorganisms, so it opens tremendous opportunities for various metallic nanoparticles intracellular synthesis as well as the practical application.     

Metal Doped Core–Shell Metal‐Organic Frameworks@Covalent Organic Frameworks (MOFs@COFs) Hybrids as a Novel Photocatalytic Platform

Metal doped core–shell Metal‐Organic Frameworks@Covalent Organic Frameworks (MOFs@COFs) are presented as a novel platform for photocatalysis. A palladium (Pd) doped MOFs@COFs in the form of Pd/TiATA@LZU1 shows excellent photocatalytic performance for tandem dehydrogenation and hydrogenation reactions in a continuous‐flow microreactor and a batch system, indicating the great potential of the metal doped MOFs@COFs as a multifunctional platform for photocatalysis. Explanations for the performance enhancement are elucidated. An integrated dual‐chamber microreactor coupled with the metal doped MOFs@COFs is introduced to demonstrate a concept of an intensified green photochemical process, which can be broadly extended to challenging liquid–gas tandem and cascade reactions.     

Polyaniline–Silica Composite Conductive Capsules and Hollow Spheres

In this paper, we report on the preparation of monodisperse polyaniline (PANi)–silica composite capsules and hollow spheres on monodisperse core–gel‐shell template particles. An extension of the previously reported inward growth method was used. The samples were self‐stabilized without external additives. The core–gel‐shell particles were prepared by the inward sulfonation of monodisperse polystyrene particles. The introduced sulfonic acid and sulfone groups are responsible for the gel properties. The gel‐shell thickness and core size were synchronously controlled over the whole particle radius range. After aniline (ANi) monomer was preferentially absorbed in the sulfonated polystyrene shell, PANi was formed by polymerization. PANi was doped in situ with a sulfonic acid group to give the capsules a high conductivity. PANi hollow spheres were derived after the polystyrene cores were dissolved: their cavity size and shell thickness were synchronously controlled by using different core–gel‐shell particles. The PANi–silica composite capsules and hollow spheres were therefore prepared by a sol–gel process using tetraethylorthosilicate in the conducting shell. The PANi shell became more robust while maintaining the same conductivity level. Morphological results indicate that the PANi and silica formed a bicontinuous network. Fourier‐transform infrared (FTIR) spectra revealed that the hydrogen bonding in the PANi–gel shell was enhanced after the silica phase was incorporated, which could explain the high conductivity level after the silica phase was added. In a converse procedure, silica capsules and hollow spheres were prepared by a sol–gel process that incorporated tetraethylorthosilicate into the core–gel‐shell templates, which was followed by the absorption and polymerization of aniline in the silica shell thus forming PANi–silica composite capsules and hollow spheres. The silica capsules and hollow spheres thereby became conductive.     

Multifunctional Shell–Core Nanoparticles for Treatment of Multidrug Resistance Hepatocellular Carcinoma

Multidrug resistance (MDR) is the main obstruction against the chemotherapy for hepatocellular carcinoma. Herein, a biodegradable multifunctional tumor‐targeted core–shell structural nanocarrier (RGD peptide functionalized nanoparticles, RGD‐NPs) is reported for treating MDR hepatocellular carcinoma, which consists of three components: pH‐triggered calcium phosphate shell, long circulation phosphatidylserine‐polyethylene glycol (PS‐PEG) core, and an active targeting ligand RGD peptide. Drug‐resistance inhibitor (verapamil, VER) and chemotherapeutic agent (mitoxantrone, MIT) are separately encapsulated into the outer shell layer and inner core layer to obtain VER and MIT loaded RGD‐NPs (VM‐RGD‐NPs). Due to the shell–core structure, the VER and MIT can release sequentially, thus synergistically weakening the efflux effect to MIT by MDR cells. Also, the calcium phosphate can trigger lysosomal escaping through the varied pH value. Together with the optimized internalization pathway in MDR tumor cells, the increased intracellular effective chemotherapeutic drug concentration can be realized, thus achieving the improved curative effect. In this system, the PEG extends the circulation time in vivo. Also, the peptide RGD distinctly increases the affinity to MDR tumors with respect to nontargeted nanoparticles. As a consequence, VM‐RGD‐NPs exhibit a significant synergistic effect toward the MDR hepatocellular carcinoma, providing a promising therapeutic approach for MDR tumor.     

Improved Hydrogen Production of Au–Pt–CdS Hetero‐Nanostructures by Efficient Plasmon‐Induced Multipathway Electron Transfer

The design of new functional materials with excellent hydrogen production activity under visible‐light irradiation has critical significance for solving the energy crisis. A well‐controlled synthesis strategy is developed to prepare an Au–Pt–CdS hetero‐nanostructure, in which each component of Au, Pt, and CdS has direct contact with the other two materials; Pt is on the tips and a CdS layer along the sides of an Au nanotriangle (NT), which exhibits excellent photocatalytic activity for hydrogen production under light irradiation (λ > 420 nm). The sequential growth and surfactant‐dependent deposition produce the three‐component Au–Pt–CdS hybrids with the Au NT acting as core while Pt and CdS serve as a co‐shell. Due to the presence of the Au NT cores, the Au–Pt–CdS nanostructures possess highly enhanced light‐harvesting and strong local‐electric‐field enhancement. Moreover, the intimate and multi‐interface contact generates multiple electron‐transfer pathways (Au to CdS, CdS to Pt and Au to Pt) which guide photoexcited electrons to the co‐catalyst Pt for an efficient hydrogen reduction reaction. By evaluating the hydrogen production rate when aqueous Na₂SO₃–Na₂S solution is used as sacrificial agent, the Au–Pt–CdS hybrid exhibits excellent photocatalytic activity that is about 2.5 and 1.4 times larger than those of CdS/Pt and Au@CdS/Pt, respectively.     

Grain Boundary and Interface Passivation with Core–Shell Au@CdS Nanospheres for High‐Efficiency Perovskite Solar Cells

The plasmonic characteristic of core–shell nanomaterials can effectively improve exciton‐generation/dissociation and carrier‐transfer/collection. In this work, a new strategy based on core–shell Au@CdS nanospheres is introduced to passivate perovskite grain boundaries (GBs) and the perovskite/hole transport layer interface via an antisolvent process. These core–shell Au@CdS nanoparticles can trigger heterogeneous nucleation of the perovskite precursor for high‐quality perovskite films through the formation of the intermediate Au@CdS–PbI₂ adduct, which can lower the valence band maximum of the 2,2,7,7‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine)9,9‐spirobifluorene (Spiro‐OMeTAD) for a more favorable energy alignment with the perovskite material. With the help of the localized surface plasmon resonance effect of Au@CdS, holes can easily overcome the barrier at the perovskite/Spiro‐OMeTAD interface (or GBs) through the bridge of the intermediate Au@CdS–PbI₂, avoiding the carrier accumulation, and suppress the carrier trap recombination at the Spiro‐OMeTAD/perovskite interface. Consequently, the Au@CdS‐based perovskite solar cell device achieves a high efficiency of over 21%, with excellent stability of ≈90% retention of initial power conversion efficiencies after 45 days storage in dry air.     

Core–Shell Nanoparticles: Characterizing Multifunctional Materials beyond Imaging—Distinguishing and Quantifying Perfect and Broken Shells

Core–shell nanoparticles (NPs) are amongst the most promising candidates in the development of new functional materials. Their fabrication and characterization are challenging, in particular when thin and intact shells are needed. To date no technique has been available that differentiates between intact and broken or cracked shells. Here a method is presented to distinguish and quantify these types of shells in a single cyclic voltammetry experiment by using the different electrochemical reactivities of the core and the shell material. A simple comparison of the charge measured during the stripping of the core material before and after the removal of the shell makes it possible to determine the quality of the shells and to estimate their thickness. As a proof‐of‐concept two multifunctional examples of core–shell NPs, Fe₃O₄@Au and Au@SnO₂, are used. This general and original method can be applied whenever core and shell materials show different redox properties. Because billions of NPs are probed simultaneously and at a low cost, this method is a convenient new screening tool for the development of new multifunctional core–shell materials and is hence a powerful complementary technique or even an alternative to the state‐of‐the‐art characterization of core–shell NPs by TEM.     

Photo‐ and pH‐Triggered Release of Anticancer Drugs from Mesoporous Silica‐Coated Pd@Ag Nanoparticles

A smart drug delivery system integrating both photothermal therapy and chemotherapy for killing cancer cells is reported. The delivery system is based on a mesoporous silica‐coated Pd@Ag nanoplates composite. The Pd@Ag nanoplate core can effectively absorb and convert near infrared (NIR) light into heat. The mesoporous silica shell is provided as the host for loading anticancer drug, doxorubicin (DOX). The mesoporous shell consists of large pores, ～10 nm in diameter, and allows the DOX loading as high as 49% in weight. DOX loaded core–shell nanoparticles exhibit a higher efficiency in killing cancer cells than free DOX. More importantly, DOX molecules are loaded in the mesopores shell through coordination bonds that are responsive to pH and heat. The release of DOX from the core‐shell delivery vehicles into cancer cells can be therefore triggered by the pH drop caused by endocytosis and also NIR irradiation. A synergistic effect of combining chemotherapy and photothermal therapy is observed in our core‐shell drug delivery system. The cell‐killing efficacy by DOX‐loaded core–shell particles under NIR irradiation is higher than the sum of chemotherapy by DOX‐loaded particles and photothermal therapy by core–shell particles without DOX.     

Silica–Gold Core–Shell Nanosphere for Ultrafast Dynamic Nanothermometer

Effective temperature measurements are of significance for a fundamental understanding of nanosystems and functional applications, requiring ultimate miniaturization of thermometers with reduced size but maintained sensitivity, simplicity, and accuracy of temperature reading. Grand challenges exist for scenarios of thermal shock or combustion where materials may be subjected to extreme thermal flux and drastic temperature variations, and dynamic thermal sensors with an ultrafast response are yet to be developed. Here, an innovative design of silica–gold core–shell (SiO₂@Au) nanospheres is demonstrated as a potential dynamic sensor with a sub‐second response time and accurate temperature determination based on the strong temperature dependence of the thermally induced morphological self‐reorganization and characteristic surface plasmon (SP) absorption of the metal shell. The irreversible thermally induced morphological and optical signatures behave as characteristic “fingerprints” for temperature recordings, allowing the retrieval of thermal history ex‐situ. As compared with current nanothermometer technologies such as metal‐filled nanotubes, the core–shell nanosphere‐based dynamic thermosensor offers synergistic advantages of ultrafast time response, fast readout, permanent recording of thermal history, and ex‐situ capabilities for effective temperature measurements.     

Core–Shell Zeolite Microcomposites

Core–shell zeolite composites possessing a core and a shell of different zeolite structure types have been synthesized. A characteristic feature of the obtained composites is the relatively large single‐crystal core and the very thin polycrystalline shell. The incompatibility between the core crystals and the zeolite precursor mixture yielding the shell layer has been circumvented by the adsorption of nanoseeds on the core surface, which induced the crystallization of the shell. The pretreated core crystals are subsequently subjected to a continuous growth in a zeolite precursor mixture. The feasibility of this synthetic approach has been exemplified by the preparation of core–shell β‐zeolite–silicalite‐1 composites. The synthesized composites have been characterized using X‐ray diffraction, high‐resolution transmission electron microscopy, and scanning electron microscopy. The integrity of the shell layer has been tested via N₂‐adsorption measurements on materials comprising a calcined core (β‐zeolite) and a non‐calcined tetrapropylammonium (TPA)‐containing shell, the latter being non‐permeable for the N₂ molecules. These measurements have shown that 86 % of the β‐zeolite crystals are covered with a defect‐free TPA–silicalite‐1 shell after a single hydrothermal treatment, while after three consecutive crystallization steps this value reaches 99 %. The shell integrity of the calcined composite has been studied by the adsorption of butane, toluene, and 1,3,5‐trimethylbenzene, which confirmed the superior performance of the triple‐shell composites.     

Surface Molecularly Imprinted Polymer Core–Shell Particles

Core–shell molecularly imprinted polymers (CS‐MIPs) have been prepared by aqueous emulsion polymerization using water‐soluble template molecules. An amphiphilic binding monomer, oleyl phenyl hydrogen phosphate and ethylene glycol dimethacrylate were used in the formation of highly crosslinked surfaces around divinyl benzene crosslinked polystyrene core colloids. Evidence was obtained by transmission electron microscopy (TEM) for a change in surface morphology when the polymer shell was formed in the presence of a template. The caffeine‐imprinted polymers were shown to bind caffeine in preference to theophylline from an equimolar mixture of the compounds in aqueous solution at pH 7.0, whilst concentration–binding (Scatchard) curves revealed the presence of two populations of binding sites in aqueous phosphate buffer at pH 8.0 for caffeine and theophylline. Similar studies were also carried out for (S)‐propranolol and (S)‐atenolol at pH 5.5, which also revealed the presence of two populations of binding sites for core–shell particles imprinted with these compounds. (S)‐Propranolol was selectively removed from a solution of (S)‐propranolol and (S)‐atenolol by both of the CS‐MIPs, whereas the non‐imprinted particle showed no selectivity for either component.     

Poly(Acrylic Acid) Modification of Nd3+‐Sensitized Upconversion Nanophosphors for Highly Efficient UCL Imaging and pH‐Responsive Drug Delivery

In this work, a simple method is demonstrated for the synthesis of multifunctional core–shell nanoparticles NaYF₄:Yb,Er@NaYF₄:Yb@NaNdF₄:Yb@NaYF₄:Yb@PAA (labeled as Er@Y@Nd@Y@PAA or UCNP@PAA), which contain a highly effective 808‐nm‐to‐visible UCNP core and a thin shell of poly(acrylic acid) (PAA) to achieve upconversion bioimaging and pH‐sensitive anticancer chemotherapy simultaneously. The core–shell Nd³⁺‐sensitized UCNPs are optimized by varying the shell number, core size, and host lattices. The final optimized Er@Y@Nd@Y nanoparticle composition shows a significantly improved upconversion luminescence intensity, that is, 12.8 times higher than Er@Y@Nd nanoparticles. After coating the nanocomposites with a thin layer of PAA, the resulting UCNP@PAA nanocomposite perform well as a pH‐responsive nanocarrier and show clear advantages over UCNP@mSiO₂, which are evidenced by in vitro/in vivo experiments. Histological analysis also reveals that no pathological changes or inflammatory responses occur in the heart, lungs, kidneys, liver, and spleen. In summary, this study presents a major step forward towards a new therapeutic and diagnostic treatment of tumors by using 808‐nm excited UCNPs to replace the traditional 980‐nm excitation.     

Ultralong CdTe Nanowires: Catalyst‐Free Synthesis and High‐Yield Transformation into Core–Shell Heterostructures

A novel catalyst‐free synthetic strategy for producing high‐quality CdTe nanowires in solution is proposed. A special reaction condition is intentionally constructed in the reaction system to induce the formation of nanowires through oriented in situ assembly of tiny particles. To establish such special synthetic conditions in the CdTe system, not only are its typical features and possible solutions deeply analyzed, but also related factors, such as the ligand environment, injection and growth temperature, and Cd‐to‐Te precursor ratio, are systemically investigated. High‐quality ultralong (up to 10 μm) and ultrathin (less than 10 nm) CdTe nanowires are produced in solution under optimal reaction conditions. Morphological, spectral, and compositional analyses are performed to examine the products formed at different reaction stages in order to clarify the formation mechanism of the CdTe nanowires. Furthermore, the transformation of the CdTe nanowires into CdTe/CdSe core–shell heterostructures is intensively explored, and the CdSe epitaxial growth process is specially tracked by morphological and spectral characterization techniques. Finally, CdTe nanowires coated with a continuous and dense CdSe shell are successfully fabricated by using a proper coating protocol.     

Silica‐Coated Manganese Oxide Nanoparticles as a Platform for Targeted Magnetic Resonance and Fluorescence Imaging of Cancer Cells

Monodisperse silica‐coated manganese oxide nanoparticles (NPs) with a diameter of ～35 nm are synthesized and are aminated through silanization. The amine‐functionalized core–shell NPs enable the covalent conjugation of a fluorescent dye, Rhodamine B isothiocyanate (RBITC), and folate (FA) onto their surface. The formed Mn₃O₄@SiO₂(RBITC)–FA core–shell nanocomposites are water‐dispersible, stable, and biocompatible when the Mn concentration is below 50 µg mL^?1 as confirmed by a cytotoxicity assay. Relaxivity measurements show that the core–shell NPs have a T₁ relaxivity (r₁) of 0.50 mM ^?1 s^?1 on the 0.5 T scanner and 0.47 mM ^?1 s^?1 on the 3.0 T scanner, suggesting the possibility of using the particles as a T₁ contrast agent. Combined flow cytometry, confocal microscopy, and magnetic resonance imaging studies show that the Mn₃O₄@SiO₂(RBITC)–FA nanocomposites can specifically target cancer cells overexpressing FA receptors (FARs). Findings from this study suggest that the silica‐coated Mn₃O₄ core–shell NPs could be used as a platform for bimodal imaging (both magnetic resonance and fluorescence) in various biological systems.