High‐Efficiency Perovskite Light‐Emitting Diodes with Synergetic Outcoupling Enhancement

Perovskite light‐emitting diodes (PeLEDs) show great application potential in high‐quality flat‐panel displays and solid‐state lighting due to their steadily improved efficiency, tunable colors, narrow emission peak, and easy solution‐processing capability. However, because of high optical confinement and nonradiative charge recombination during electron–photon conversion, the highest reported efficiency of PeLEDs remains far behind that of their conventional counterparts, such as inorganic LEDs, organic LEDs, and quantum‐dot LEDs. Here a facile route is demonstrated by adopting bioinspired moth‐eye nanostructures at the front electrode/perovskite interface to enhance the outcoupling efficiency of waveguided light in PeLEDs. As a result, the maximum external quantum efficiency and current efficiency of the modified cesium lead bromide (CsPbBr₃) green‐emitting PeLEDs are improved to 20.3% and 61.9 cd A^?1, while retaining spectral and angular independence. Further reducing light loss in the substrate mode using a half‐ball lens, efficiencies of 28.2% and 88.7 cd A^?1 are achieved, which represent the highest values reported to date for PeLEDs. These results represent a substantial step toward achieving practical applications of PeLEDs.     

Perovskite Light‐Emitting Diodes with Improved Outcoupling Using a High‐Index Contrast Nanoarray

Organic–inorganic hybrid perovskite light‐emitting diodes (PeLEDs) are promising for next‐generation optoelectronic devices due to their potential to achieve high color purity, efficiency, and brightness. Although the external quantum efficiency (EQE) of PeLEDs has recently surpassed 20%, various strategies are being pursued to increase EQE further and reduce the EQE gap compared to other LED technologies. A key point to further boost EQE of PeLEDs is linked to the high refractive index of the perovskite emissive layer, leading to optical losses of more than 70% of emitted photons. Here, it is demonstrated that a randomly distributed nanohole array with high‐index contrast can effectively enhance outcoupling efficiency in PeLEDs. Based on a comprehensive optical analysis on the perovskite thin film and outcoupling structure, it is confirmed that the nanohole array effectively distributes light into the substrate for improved outcoupling, allowing for 1.64 times higher light extraction. As a result, highly efficient red/near‐infrared PeLEDs with a peak EQE of 14.6% are demonstrated.     

Perovskite Materials for Light‐Emitting Diodes and Lasers

Organic–inorganic hybrid perovskites have cemented their position as an exceptional class of optoelectronic materials thanks to record photovoltaic efficiencies of 22.1%, as well as promising demonstrations of light‐emitting diodes, lasers, and light‐emitting transistors. Perovskite materials with photoluminescence quantum yields close to 100% and perovskite light‐emitting diodes with external quantum efficiencies of 8% and current efficiencies of 43 cd A^?1 have been achieved. Although perovskite light‐emitting devices are yet to become industrially relevant, in merely two years these devices have achieved the brightness and efficiencies that organic light‐emitting diodes accomplished in two decades. Further advances will rely decisively on the multitude of compositional, structural variants that enable the formation of lower‐dimensionality layered and three‐dimensional perovskites, nanostructures, charge‐transport materials, and device processing with architectural innovations. Here, the rapid advancements in perovskite light‐emitting devices and lasers are reviewed. The key challenges in materials development, device fabrication, operational stability are addressed, and an outlook is presented that will address market viability of perovskite light‐emitting devices.     

Hybrid Perovskite Light‐Emitting Diodes Based on Perovskite Nanocrystals with Organic–Inorganic Mixed Cations

Organic–inorganic hybrid perovskite materials with mixed cations have demonstrated tremendous advances in photovoltaics recently, by showing a significant enhancement of power conversion efficiency and improved perovskite stability. Inspired by this development, this study presents the facile synthesis of mixed‐cation perovskite nanocrystals based on FA_{(1?x )}Cs_x PbBr₃ (FA = CH(NH₂)₂). By detailed characterization of their morphological, optical, and physicochemical properties, it is found that the emission property of the perovskite, FA_{(1?x )}Cs_x PbBr₃, is significantly dependent on the substitution content of the Cs cations in the perovskite composition. These mixed‐cation perovskites are employed as light emitters in light‐emitting diodes (LEDs). With an optimized composition of FA_0.8Cs_0.2PbBr₃, the LEDs exhibit encouraging performance with a highest reported luminance of 55 005 cd m^?2 and a current efficiency of 10.09 cd A^?1. This work provides important instructions on the future compositional optimization of mixed‐cation perovskite for obtaining high‐performance LEDs. The authors believe this work is a new milestone in the development of bright and efficient perovskite LEDs.     

High‐Efficiency Solution‐Processed Inorganic Metal Halide Perovskite Light‐Emitting Diodes

This paper reports highly bright and efficient CsPbBr₃ perovskite light‐emitting diodes (PeLEDs) fabricated by simple one‐step spin‐coating of uniform CsPbBr₃ polycrystalline layers on a self‐organized buffer hole injection layer and stoichiometry‐controlled CsPbBr₃ precursor solutions with an optimized concentration. The PeLEDs have maximum current efficiency of 5.39 cd A^?1 and maximum luminance of 13752 cd m^?2. This paper also investigates the origin of current hysteresis, which can be ascribed to migration of Br^? anions. Temperature dependence of the electroluminescence (EL) spectrum is measured and the origins of decreased spectrum area, spectral blue‐shift, and linewidth broadening are analyzed systematically with the activation energies, and are related with Br^? anion migration, thermal dissociation of excitons, thermal expansion, and electron–phonon interaction. This work provides simple ways to improve the efficiency and brightness of all‐inorganic polycrystalline PeLEDs and improves understanding of temperature‐dependent ion migration and EL properties in inorganic PeLEDs.     

Eu3+, Sm3+ Deep‐Red Phosphors as Novel Materials for White Light‐Emitting Diodes and Simultaneous Performance Enhancement of Organic–Inorganic Perovskite Solar Cells

The luminous efficiency of inorganic white light‐emitting diodes, to be used by the next generation as light initiators, is continuously progressing and is an emerging interest for researchers. However, low color‐rendering index (Ra), high correlated color temperature (CCT), and poor stability limit its wider application. Herein, it is reported that Sm³⁺‐ and Eu³⁺‐doped calcium scandate (CaSc₂O₄ (CSO)) are an emerging deep‐red‐emitting material with promising light absorption, enhanced emission properties, and excellent thermal stability that make it a promising candidate with potential applications in emission display, solid‐state white lighting, and the device performance of perovskite solar cells (PSCs). The average crystal structures of Sm³⁺‐doped CSO are studied by synchrotron X‐ray data that correspond to an extremely rigid host structure. Samarium ion is incorporated as a sensitizer that enhances the emission intensity up to 30%, with a high color purity of 88.9% with a 6% increment. The impacts of hosting the sensitizer are studied by quantifying the lifetime curves. The CaSc₂O₄:0.15Eu³⁺,0.03Sm³⁺ phosphor offers significant resistance to thermal quenching. The incorporation of lanthanide ion‐doped phosphors CSOE into PSCs is investigated along with their potential applications. The CSOE‐coated PSCs devices exhibit a high current density and a high power conversion efficiency (15.96%) when compared to the uncoated control devices.     

Enhanced Electroluminescence from Organic Light‐Emitting Diodes with an Organic–Inorganic Perovskite Host Layer

The development of host materials with high performance is essential for fabrication of efficient and stable organic light‐emitting diodes (OLEDs). Although host materials used in OLEDs are typically organics, in this study, it is shown that the organic–inorganic perovskite CH₃NH₃PbCl₃ (MAPbCl₃) can be used as a host layer for OLEDs. Vacuum‐evaporated MAPbCl₃ films have a wide band gap of about 3 eV and very high and relatively balanced hole and electron mobilities, which are suitable for the host material. Photoluminescence and electroluminescence take place through energy transfer from MAPbCl₃ to an organic emitter in films. Incorporation of an MAPbCl₃ host layer into OLEDs leads to a reduction of driving voltage and enhancement of external quantum efficiency as compared to devices with a conventional organic host layer. Additionally, OLEDs with an MAPbCl₃ host layer demonstrate very good operational stability under continuous current operation. These results can be extensively applied to organic‐ and perovskite‐based optoelectronics.     

Highly Efficient Spectrally Stable Red Perovskite Light‐Emitting Diodes

Perovskite light‐emitting diodes (LEDs) have recently attracted great research interest for their narrow emissions and solution processability. Remarkable progress has been achieved in green perovskite LEDs in recent years, but not blue or red ones. Here, highly efficient and spectrally stable red perovskite LEDs with quasi‐2D perovskite/poly(ethylene oxide) (PEO) composite thin films as the light‐emitting layer are reported. By controlling the molar ratios of organic salt (benzylammonium iodide) to inorganic salts (cesium iodide and lead iodide), luminescent quasi‐2D perovskite thin films are obtained with tunable emission colors from red to deep red. The perovskite/polymer composite approach enables quasi‐2D perovskite/PEO composite thin films to possess much higher photoluminescence quantum efficiencies and smoothness than their neat quasi‐2D perovskite counterparts. Electrically driven LEDs with emissions peaked at 638, 664, 680, and 690 nm have been fabricated to exhibit high brightness and external quantum efficiencies (EQEs). For instance, the perovskite LED with an emission peaked at 680 nm exhibits a brightness of 1392 cd m^?2 and an EQE of 6.23%. Moreover, exceptional electroluminescence spectral stability under continuous device operation has been achieved for these red perovskite LEDs.     

Surface‐Plasmon‐Enhanced Perovskite Light‐Emitting Diodes

Perovskite light‐emitting diodes (PeLEDs) have attracted considerable attention because of their potential in display and lighting applications. To promote commercialization of PeLEDs, it is important to improve the external quantum efficiency of the devices, which depends on their internal quantum efficiency (IQE) and light extraction efficiency. Optical simulations have revealed that 20–50% of the light generated in the device will be lost to surface plasmon (SP) modes formed in the metal/dielectric interfaces. Therefore, extracting the optical energy in SP modes to the air will greatly increase the light extraction efficiency of PeLEDs. In addition, the SPs can accelerate radiative recombination of the emitter via near‐field effects. Thus, the IQE of a PeLED can also be enhanced by SP manipulation. In this review, first, general concepts of the SPs and how they can enhance the efficiency of LEDs are introduced. Then recent progresses in SP‐enhanced emission of perovskite films and LEDs are systematically reviewed. After that, the challenges and opportunities of the SP‐enhanced PeLEDs are shown, followed by an outlook of further development of the SPs in perovskite optoelectronic devices.     

Stretchable Organometal‐Halide‐Perovskite Quantum‐Dot Light‐Emitting Diodes

Stretchable light‐emitting diodes (LEDs) and electroluminescent capacitors have been reported to potentially bring new opportunities to wearable electronics; however, these devices lack in efficiency and/or stretchability. Here, a stretchable organometal‐halide‐perovskite quantum‐dot LED with both high efficiency and mechanical compliancy is demonstrated. The hybrid device employs an ultrathin (<3 µm) LED structure conformed on a surface‐wrinkled elastomer substrate. Its luminescent efficiency is up to 9.2 cd A^?1, which is 70% higher than a control diode fabricated on the rigid indium tin oxide/glass substrate. Mechanical deformations up to 50% tensile strain do not induce significant loss of the electroluminescent property. The device can survive 1000 stretch–release cycles of 20% tensile strain with small fluctuations in electroluminescent performance.     

Molecule‐Induced p‐Doping in Perovskite Nanocrystals Enables Efficient Color‐Saturated Red Light‐Emitting Diodes

Color‐saturated red light‐emitting diodes (LEDs) with emission wavelengths at around 620–640 nm are an essential part of high‐definition displays. Metal halide perovskites with very narrow emission linewidth are promising emitters, and rapid progress has been made in perovskite‐based LEDs (PeLEDs); however, the efficiency of the current color—pure red PeLEDs—still far lags behind those of other‐colored ones. Here, a simple but efficient strategy is reported to gradually down‐shift the Fermi level of perovskite nanocrystals (NCs) by controlling the interaction between NCs and their surface molecular electron acceptor—benzyl iodide with aromatic rings—and realize p‐doping in the color‐saturated 625 nm emitting NCs, which significantly reduces the hole injection barrier in devices. Besides, both the luminescence efficiency and electric conductivity of perovskite NCs are enhanced as additional advantages as the result of surface defects passivation. As a result, the external quantum efficiency for the resulting LED is increased from 4.5% to 12.9% after benzyl iodide treatment, making this device the best‐performing color‐saturated red PeLED so far. It is further found that the hole injection plays a more critical role than the photoluminescence efficiency of perovskite emitter in determining the LED performance, which implies design principles for efficient thin‐film planar LEDs.     

Conjugated Polyelectrolytes as Multifunctional Passivating and Hole‐Transporting Layers for Efficient Perovskite Light‐Emitting Diodes

Metal halide perovskites (MHPs) have attracted significant attention as light‐emitting materials owing to their high color purities and tunabilities. A key issue in perovskite light‐emitting diodes (PeLEDs) is the fabrication of an optimal charge transport layer (CTL), which has desirable energy levels for efficient charge injection while blocking opposite charges and enabling perovskite layer growth with reduced interfacial defects. Herein, two poly(fluorene‐phenylene)‐based anionic conjugated polyelectrolytes (CPEs) with different counterions (K⁺ and tetramethylammonium (TMA⁺)) are presented as multifunctional passivating and hole‐transporting layers (HTLs). The crystal growth of MHPs grown on different HTLs is investigated through X‐ray photoelectron spectroscopy, X‐ray diffraction, and density functional theory calculation. The CPE bearing the TMA⁺ counterions remarkably improves the growth of perovskites with suppressed interfacial defects, leading to significantly enhanced emission properties and device performance. The luminescent properties are further enhanced via aging and electrical stress application with effective rearrangement of the counterions on the interfacial defects in the perovskites. Finally, efficient formamidinium lead tribromide‐based quasi‐2D PeLEDs with an external quantum efficiency of 10.2% are fabricated. Using CPEs with varying counterions as a CTL can serve as an effective method for controlling the interfacial defects and improving perovskite‐based optoelectronic device properties.