Porous Carbon‐Hosted Atomically Dispersed Iron–Nitrogen Moiety as Enhanced Electrocatalysts for Oxygen Reduction Reaction in a Wide Range of pH

As one of the alternatives to replace precious metal catalysts, transition‐metal–nitrogen–carbon (M–N–C) electrocatalysts have attracted great research interest due to their low cost and good catalytic activities. Despite nanostructured M–N–C catalysts can achieve good electrochemical performances, they are vulnerable to aggregation and insufficient catalytic sites upon continuous catalytic reaction. In this work, metal–organic frameworks derived porous single‐atom electrocatalysts (SAEs) were successfully prepared by simple pyrolysis procedure without any further posttreatment. Combining the X‐ray absorption near‐edge spectroscopy and electrochemical measurements, the SAEs have been identified with superior oxygen reduction reaction (ORR) activity and stability compared with Pt/C catalysts in alkaline condition. More impressively, the SAEs also show excellent ORR electrocatalytic performance in both acid and neutral media. This study of nonprecious catalysts provides new insights on nanoengineering catalytically active sites and porous structures for nonprecious metal ORR catalysis in a wide range of pH.     

Electrocatalytic N‐Doped Graphitic Nanofiber – Metal/Metal Oxide Nanoparticle Composites

Carbon‐based nanocomposites have shown promising results in replacing commercial Pt/C as high‐performance, low cost, nonprecious metal‐based oxygen reduction reaction (ORR) catalysts. Developing unique nanostructures of active components (e.g., metal oxides) and carbon materials is essential for their application in next generation electrode materials for fuel cells and metal–air batteries. Herein, a general approach for the production of 1D porous nitrogen‐doped graphitic carbon fibers embedded with active ORR components, (M/MO_x, i.e., metal or metal oxide nanoparticles) using a facile two‐step electrospinning and annealing process is reported. Metal nanoparticles/nanoclusters nucleate within the polymer nanofibers and subsequently catalyze graphitization of the surrounding polymer matrix and following oxidation, create an interconnected graphite–metal oxide framework with large pore channels, considerable active sites, and high specific surface area. The metal/metal oxide@N‐doped graphitic carbon fibers, especially Co₃O₄, exhibit comparable ORR catalytic activity but superior stability and methanol tolerance versus Pt in alkaline solutions, which can be ascribed to the synergistic chemical coupling effects between Co₃O₄ and robust 1D porous structures composed of interconnected N‐doped graphitic nanocarbon rings. This finding provides a novel insight into the design of functional electrocatalysts using electrospun carbon nanomaterials for their application in energy storage and conversion fields.     

Active Sites Engineering toward Superior Carbon‐Based Oxygen Reduction Catalysts via Confinement Pyrolysis

Developing efficient and low‐cost defective carbon‐based catalysts for the oxygen reduction reaction (ORR) is essential to metal–air batteries and fuel cells. Active sites engineering toward these catalysts is highly desirable but challenging to realize boosted catalytic performance. Herein, a sandwich‐like confinement route to achieve the controllable regulation of active sites for carbon‐based catalysts is reported. In particular, three distinct catalysts including metal‐free N‐doped carbon (NC), single Co atoms dispersed NC (Co–N–C), and Co nanoparticles‐contained Co–N–C (Co/Co–N–C) are controllably realized and clearly identified by synchrotron radiation‐based X‐ray spectroscopy. Electrochemical measurements suggest that the Co/Co–N–C catalyst delivers optimized ORR performance due to the rich Co–N_x active sites and their synergistic effect with metallic Co nanoparticles. This work provides deep insight for rationally designing efficient ORR catalyst based on active sites engineering.     

Co‐N‐Doped Mesoporous Carbon Hollow Spheres as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction

Rational design of cost‐effective, nonprecious metal‐based catalysts with desirable oxygen reduction reaction (ORR) performance is extremely important for future fuel cell commercialization, etc. Herein, a new type of ORR catalyst of Co‐N‐doped mesoporous carbon hollow sphere (Co‐N‐mC) was developed by pyrolysis from elaborately fabricated polystyrene@polydopamine‐Co precursors. The obtained catalysts with active Co sites distributed in highly graphitized mesoporous N‐doped carbon hollow spheres exhibited outstanding ORR activity with an onset potential of 0.940 V, a half‐wave potential of 0.851 V, and a small Tafel slope of 45 mV decade^?1 in 0.1 m KOH solution, which was comparable to that of the Pt/C catalyst (20%, Alfa). More importantly, they showed superior durability with little current decline (less than 4%) in the chronoamperometric evaluation over 60 000 s. These features make the Co‐N‐mC one of the best nonprecious‐metal catalysts to date for ORR in alkaline condition.     

Pyridinic‐N Protected Synthesis of 3D Nitrogen‐Doped Porous Carbon with Increased Mesoporous Defects for Oxygen Reduction

Nitrogen (N)‐doped carbons are potential nonprecious metal catalysts to replace Pt for the oxygen reduction reaction (ORR). Pyridinic‐N‐C is believed to be the most active N group for catalyzing ORR. In this work, using zinc phthalocyanine as a precursor effectively overcomes the serious loss of pyridinic‐N, which is commonly regarded as the biggest obstacle to catalytic performance enhancement upon adopting a second pyrolysis process, for the preparation of a 3D porous N‐doped carbon framework (NDCF). The results show only ≈14% loss in pyridinic‐N proportion in the Zn‐containing sample during the second pyrolysis process. In comparison, a loss of ≈72% pyridinic‐N occurs for the non‐Zn counterpart. The high pyridinic‐N proportion, the porous carbon framework produced upon NaCl removal, and the increased mesoporous defects in the second pyrolysis process make the as‐prepared catalyst an excellent electrocatalyst for ORR, exhibiting a half‐wave potential (E_1/2 = 0.88 V) up to 33 mV superior to state‐of‐the‐art Pt/C and high four‐electron selectivity (n > 3.83) in alkaline solution, which is among the best ORR activities reported for N‐doped carbon catalysts. Furthermore, only ≈18 mV degradation in E_1/2 occurs after an 8000 cycles' accelerating stability test, manifesting the outstanding stability of the as‐prepared catalyst.     

In Situ Exfoliated,Edge‐Rich,Oxygen‐Functionalized Graphene from Carbon Fibers for Oxygen Electrocatalysis

Metal‐free electrocatalysts have been extensively developed to replace noble metal Pt and RuO₂ catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in fuel cells or metal–air batteries. These electrocatalysts are usually deposited on a 3D conductive support (e.g., carbon paper or carbon cloth (CC)) to facilitate mass and electron transport. For practical applications, it is desirable to create in situ catalysts on the carbon fiber support to simplify the fabrication process for catalytic electrodes. In this study, the first example of in situ exfoliated, edge‐rich, oxygen‐functionalized graphene on the surface of carbon fibers using Ar plasma treatment is successfully prepared. Compared to pristine CC, the plasma‐etched carbon cloth (P‐CC) has a higher specific surface area and an increased number of active sites for OER and ORR. P‐CC also displays good intrinsic electron conductivity and excellent mass transport. Theoretical studies show that P‐CC has a low overpotential that is comparable to Pt‐based catalysts, as a result of both defects and oxygen doping. This study provides a simple and effective approach for producing highly active in situ catalysts on a carbon support for OER and ORR.     

Metal–Organic Framework‐Derived Bamboo‐like Nitrogen‐Doped Graphene Tubes as an Active Matrix for Hybrid Oxygen‐Reduction Electrocatalysts

In this work, large size (i.e., diameter > 100 nm) graphene tubes with nitrogen‐doping are prepared through a high‐temperature graphitization process of dicyandiamide (DCDA) and Iron(II) acetate templated by a novel metal–organic framework (MIL‐100(Fe)). The nitrogen‐doped graphene tube (N‐GT)‐rich iron‐nitrogen‐carbon (Fe‐N‐C) catalysts exhibit inherently high activity towards the oxygen reduction reaction (ORR) in more challenging acidic media. Furthermore, aiming to improve the activity and stability of conventional Pt catalysts, the ORR active N‐GT is used as a matrix to disperse Pt nanoparticles in order to build a unique hybrid Pt cathode catalyst. This is the first demonstration of the integration of a highly active Fe‐N‐C catalyst with Pt nanoparticles. The synthesized 20% Pt/N‐GT composite catalysts demonstrate significantly enhanced ORR activity and H₂‐air fuel cell performance relative to those of 20% Pt/C, which is mainly attributed to the intrinsically active N‐GT matrix along with possible synergistic effects between the non‐precious metal active sites and the Pt nanoparticles. Unlike traditional Pt/C, the hybrid catalysts exhibit excellent stability during the accelerated durability testing, likely due to the unique highly graphitized graphene tube morphologies, capable of providing strong interaction with Pt nanoparticles and then preventing their agglomeration.     

Metal–Organic‐Framework‐Derived Hybrid Carbon Nanocages as a Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are cornerstone reactions for many renewable energy technologies. Developing cheap yet durable substitutes of precious‐metal catalysts, especially the bifunctional electrocatalysts with high activity for both ORR and OER reactions and their streamlined coupling process, are highly desirable to reduce the processing cost and complexity of renewable energy systems. Here, a facile strategy is reported for synthesizing double‐shelled hybrid nanocages with outer shells of Co‐N‐doped graphitic carbon (Co‐NGC) and inner shells of N‐doped microporous carbon (NC) by templating against core–shell metal–organic frameworks. The double‐shelled NC@Co‐NGC nanocages well integrate the high activity of Co‐NGC shells into the robust NC hollow framework with enhanced diffusion kinetics, exhibiting superior electrocatalytic properties to Pt and RuO₂ as a bifunctional electrocatalyst for ORR and OER, and hold a promise as efficient air electrode catalysts in Zn–air batteries. First‐principles calculations reveal that the high catalytic activities of Co‐NGC shells are due to the synergistic electron transfer and redistribution between the Co nanoparticles, the graphitic carbon, and the doped N species. Strong yet favorable adsorption of an OOH* intermediate on the high density of uncoordinated hollow‐site C atoms with respect to the Co lattice in the Co‐NGC structure is a vital rate‐determining step to achieve excellent bifunctional electrocatalytic activity.     

Cobalt Phosphide Coupled with Heteroatom‐Doped Nanocarbon Hybrid Electroctalysts for Efficient,Long‐Life Rechargeable Zinc–Air Batteries

Metal phosphides and heteroatom‐doped carbons have been regarded as promising candidates as bifunctional catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). However, both have suffered from stability issues during repeated ORR and OER operations in zinc–air batteries (ZABs). Herein, this study reports a versatile cobalt‐based hybrid catalyst with a 1D structure by integrating the metal‐organic framework‐derived conversion approach and an in situ crosslinking method. Among them, the 1D hybrid catalyst composed of ultrasmall cobalt phosphide nanoparticles supported by nitrogen‐, sulfur‐, phosphorus‐doped carbon matrix shows remarkable bifunctional activity close to that of the benchmark precious‐metal catalysts along with an excellent durability in the full potential range covering both the OER and ORR. The overall overpotential of the rechargeable ZABs can be greatly reduced with this bifunctional hybrid catalyst as an air‐electrode, and the cycling stability outperforms the commercial Pt/C catalyst. It is revealed that the cobalt phosphide nanoparticles are in situ converted to cobalt oxide under the accelerated conditions during OER (and/or ORR) of the ZABs and reduces the anodic current applied to the carbon. This contributes to the stability of the carbon material and in maintaining the high initial catalytic properties of the hybrid catalyst.     

Fe Isolated Single Atoms on S,N Codoped Carbon by Copolymer Pyrolysis Strategy for Highly Efficient Oxygen Reduction Reaction

Heteroatom‐doped Fe‐NC catalyst has emerged as one of the most promising candidates to replace noble metal‐based catalysts for highly efficient oxygen reduction reaction (ORR). However, delicate controls over their structure parameters to optimize the catalytic efficiency and molecular‐level understandings of the catalytic mechanism are still challenging. Herein, a novel pyrrole–thiophene copolymer pyrolysis strategy to synthesize Fe‐isolated single atoms on sulfur and nitrogen‐codoped carbon (Fe‐ISA/SNC) with controllable S, N doping is rationally designed. The catalytic efficiency of Fe‐ISA/SNC shows a volcano‐type curve with the increase of sulfur doping. The optimized Fe‐ISA/SNC exhibits a half‐wave potential of 0.896 V (vs reversible hydrogen electrode (RHE)), which is more positive than those of Fe‐isolated single atoms on nitrogen codoped carbon (Fe‐ISA/NC, 0.839 V), commercial Pt/C (0.841 V), and most reported nonprecious metal catalysts. Fe‐ISA/SNC is methanol tolerable and shows negligible activity decay in alkaline condition during 15 000 voltage cycles. X‐ray absorption fine structure analysis and density functional theory calculations reveal that the incorporated sulfur engineers the charges on N atoms surrounding the Fe reactive center. The enriched charge facilitates the rate‐limiting reductive release of OH* and therefore improved the overall ORR efficiency.     

Anion‐Regulated Selective Generation of Cobalt Sites in Carbon: Toward Superior Bifunctional Electrocatalysis

The introduction of active transition metal sites (TMSs) in carbon enables the synthesis of noble‐metal‐free electrocatalysts for clean energy conversion applications; however, there are often multiple existing forms of TMSs, which are of different natures and catalytic models. Regulating the evolution of distinctive TMSs is highly desirable but remains challenging to date. Anions, as essential elements involved in the synthesis, have been totally neglected previously in the construction of TMSs. Herein, the effects of anions on the creation of different types of TMSs are investigated for the first time. It is found that the active cobalt–nitrogen sites tend to be selectively constructed on the surface of N‐doped carbon by using chloride, while metallic cobalt nanoparticles encased in protective graphite layers are the dominant forms of cobalt species with nitrate ions. The obtained catalysts demonstrate cobalt‐sites‐dependent activity for oxygen reduction reaction and hydrogen evolution reaction in acidic media. The remarkably enhanced catalytic activities approaching that of benchmark Pt/C in an acidic medium have been obtained on the catalyst dominated with cobalt–nitrogen sites, confirmed by the advanced spectroscopic characterization. This finding demonstrates a general paradigm of anion‐regulated evolution of distinctive TMSs, providing a new pathway for enhancing performances of various targeted reactions related with TMSs.     

Nanostructured Metal‐Free Electrochemical Catalysts for Highly Efficient Oxygen Reduction

Replacing precious and nondurable Pt catalysts with cheap and commercially available materials to facilitate sluggish cathodic oxygen reduction reaction (ORR) is a key issue in the development of fuel cell technology. The recently developed cost effective and highly stable metal‐free catalysts reveal comparable catalytic activity and significantly better fuel tolerance than that of current Pt‐based catalysts; therefore, they can serve as feasible Pt alternatives for the next generation of ORR electrocatalysts. Their promising electrocatalytic properties and acceptable costs greatly promote the R&D of fuel cell technology. This review provides an overview of recent advances in state‐of‐the‐art nanostructured metal‐free electrocatalysts including nitrogen‐doped carbons, graphitic‐carbon nitride (g‐C₃N₄)‐based hybrids, and 2D graphene‐based materials. A special emphasis is placed on the molecular design of these electrocatalysts, origin of their electrochemical reactivity, and ORR pathways. Finally, some perspectives are highlighted on the development of more efficient ORR electrocatalysts featuring high stability, low cost, and enhanced performance, which are the key factors to accelerate the commercialization of fuel cell technology.     

Well‐Defined Cobalt Catalyst with N‐Doped Carbon Layers Enwrapping: The Correlation between Surface Atomic Structure and Electrocatalytic Property

Admittedly, the surface atomic structure of heterogenous catalysts toward the electrochemical oxygen reduction reaction (ORR) are accepted as the important features that can tune catalytic activity and even catalytic pathway. Herein, a surface engineering strategy to controllably synthesize a carbon‐layer‐wrapped cobalt‐catalyst from 2D cobalt‐based metal–organic frameworks is elaborately demonstrated. Combined with synchrotron radiation X‐ray photoelectron spectroscopy, the soft X‐ray absorption near‐edge structure results confirmed that rich covalent interfacial Co? N? C bonds are efficiently formed between cobalt nanoparticles and wrapped carbon‐layers during the polydopamine‐assisted pyrolysis process. The X‐ray absorption fine structure and corresponding extended X‐ray absorption fine structure spectra further reveal that the wrapped cobalt with Co–N coordinations shows distinct surface distortion and atomic environmental change of Co‐based active sites. In contrast to the control sample without coating layers, the 800 °C‐annealed cobalt catalyst with N‐doped carbon layers enwrapping achieves significantly enhanced ORR activity with onset and half‐wave potentials of 0.923 and 0.816 V (vs reversible hydrogen electrode), highlighting the important correlation between surface atomic structure and catalytic property.     

Co Nanoislands Rooted on Co–N–C Nanosheets as Efficient Oxygen Electrocatalyst for Zn–Air Batteries

Developing non‐precious‐metal bifunctional oxygen reduction and evolution reaction (ORR/OER) catalysts is a major task for promoting the reaction efficiency of Zn–air batteries. Co‐based catalysts have been regarded as promising ORR and OER catalysts owing to the multivalence characteristic of cobalt element. Herein, the synthesis of Co nanoislands rooted on Co–N–C nanosheets supported by carbon felts (Co/Co–N–C) is reported. Co nanosheets rooted on the carbon felt derived from electrodeposition are applied as the self‐template and cobalt source. The synergistic effect of metal Co islands with OER activity and Co–N–C nanosheets with superior ORR performance leads to good bifuctional catalytic performances. Wavelet transform extended X‐ray absorption fine spectroscopy and X‐ray photoelectron spectroscopy certify the formation of Co (mainly Co⁰) and the Co–N–C (mainly Co²⁺ and Co³⁺) structure. As the air‐cathode, the assembled aqueous Zn–air battery exhibits a small charge–discharge voltage gap (0.82 V@10 mA cm^?2) and high power density of 132 mW cm^?2, outperforming the commercial Pt/C catalyst. Additionally, the cable flexible rechargeable Zn–air battery exhibits excellent bendable and durability. Density functional theory calculation is combined with operando X‐ray absorption spectroscopy to further elucidate the active sites of oxygen reactions at the Co/Co–N–C cathode in Zn–air battery.     

Boosting Bifunctional Oxygen Electrolysis for N‐Doped Carbon via Bimetal Addition

The addition of transition metals, even in a trace amount, into heteroatom‐doped carbon (M‐N/C) is intensively investigated to further enhance oxygen reduction reaction (ORR) activity. However, the influence of metal decoration on the electrolysis of the reverse reaction of ORR, that is, oxygen evolution reaction (OER), is seldom reported. Moreover, further improving the bifunctional activity and corrosion tolerance for carbon‐based materials remains a big challenge, especially in OER potential regions. Here, bimetal‐decorated, pyridinic N‐dominated large‐size carbon tubes (MM′‐N/C) are proposed for the first time as highly efficient and durable ORR and OER catalysts. FeFe‐N/C, CoCo‐N/C, NiNi‐N/C, MnMn‐N/C, FeCo‐N/C, NiFe‐N/C, FeMn‐N/C, CoNi‐N/C, MnCo‐N/C, and NiMn‐N/C are systematically investigated in terms of their structure, composition, morphology, surface area, and active site densities. In contrast to conventional monometal and N‐decorated carbon, small amounts of bimetal (≈2 at%) added during the one‐step template‐free synthesis contribute to increased pyridinic N content, much longer and more robust carbon tubes, reduced metal particle size, and stronger coupling between the encapsulated metals and carbon support. The synergy of those factors accounts for the dramatically improved ORR and OER activity and stability. By comparison, NiFe‐N/C and MnCo‐N/C stand out and achieve superior bifunctional oxygen catalytic performance, exceeding most of state‐of‐the‐art catalysts.     

“Wiring” Fe‐Nx‐Embedded Porous Carbon Framework onto 1D Nanotubes for Efficient Oxygen Reduction Reaction in Alkaline and Acidic Media

This study presents a novel metal‐organic‐framework‐engaged synthesis route based on porous tellurium nanotubes as a sacrificial template for hierarchically porous 1D carbon nanotubes. Furthermore, an ultrathin Fe‐ion‐containing polydopamine layer has been introduced to generate highly effective FeN_xC active sites into the carbon framework and to induce a high degree of graphitization. The synergistic effects between the hierarchically porous 1D carbon structure and the embedded FeN_xC active sites in the carbon framework manifest in superior catalytic activity toward oxygen reduction reaction (ORR) compared to Pt/C catalyst in both alkaline and acidic media. A rechargeable zinc‐air battery assembled in a decoupled configuration with the nonprecious pCNT@Fe@GL/CNF ORR electrode and Ni‐Fe LDH/NiF oxygen evolution reaction (OER) electrode exhibits charge–discharge overpotentials similar to the counterparts of Pt/C ORR electrode and IrO₂ OER electrode.     

Bio‐Derived Co2P Nanoparticles Supported on Nitrogen‐Doped Carbon as Promising Oxygen Reduction Reaction Electrocatalyst for Anion Exchange Membrane Fuel Cells

Recently, nonnoble‐metal catalysts such as a metal coordinated to nitrogen doped in a carbon matrix have been reported to exhibit superior oxygen reduction reaction (ORR) activity in alkaline media. In this work, Co₂P nanoparticles supported on heteroatom‐doped carbon catalysts (NBSCP) are developed with an eco‐friendly synthesis method using bean sprouts. NBSCP can be easily synthesized through metal precursor absorption and carbonization at a high temperature. It shows a very large specific surface area with various dopants such as nitrogen, phosphorus, and sulfur derived from small organic molecules. The catalyst can exhibit activity in various electrochemical reactions. In particular, excellent performance is noted for the ORR. Compared to the commercial Pt/C, NBSCP exhibits a lower onset potential, higher current density, and superior durability. This excellent ORR activity and durability is attributable to the synergistic effect between Co₂P nanoparticles and nitrogen‐doped carbon. In addition, superior performance is noted on applying NBSCP to a practical anion exchange membrane fuel cell system. Through this work, the possibility of applying an easily obtained bio‐derived material to energy conversion and storage systems is demonstrated.     

Atomic Fe Dispersed on N‐Doped Carbon Hollow Nanospheres for High‐Efficiency Electrocatalytic Oxygen Reduction

Exploration of high‐efficiency, economical, and ultrastable electrocatalysts for the oxygen reduction reaction (ORR) to substitute precious Pt is of great significance in electrochemical energy conversion devices. Single‐atom catalysts (SACs) have sparked tremendous interest for their maximum atom‐utilization efficiency and fascinating properties. Therefore, the development of effective synthetic methodology toward SACs becomes highly imperative yet still remains greatly challenging. Herein, a reliable SiO₂‐templated strategy is elaborately designed to synthesize atomically dispersed Fe atoms anchored on N‐doped carbon nanospheres (denoted as Fe–N–C HNSs) using the cheap and sustainable biomaterial of histidine (His) as the N and C precursor. By virtue of the numerous atomically dispersed Fe–N₄ moieties and unique spherical hollow architecture, the as‐fabricated Fe–N–C HNSs exhibit excellent ORR performance in alkaline medium with outstanding activity, high long‐term stability, and superior tolerance to methanol crossover, exceeding the commercial Pt/C catalyst and most previously reported non‐precious‐metal catalysts. This present synthetic strategy will provide new inspiration to the fabrication of various high‐efficiency single‐atom catalysts for diverse applications.     

PGM‐Free Cathode Catalysts for PEM Fuel Cells: A Mini‐Review on Stability Challenges

In recent years, significant progress has been achieved in the development of platinum group metal‐free (PGM‐free) oxygen reduction reaction (ORR) catalysts for proton exchange membrane (PEM) fuel cells. At the same time the limited durability of these catalysts remains a great challenge that needs to be addressed. This mini‐review summarizes the recent progress in understanding the main causes of instability of PGM‐free ORR catalysts in acidic environments, focusing on transition metal/nitrogen codoped systems (M‐N‐C catalysts, M: Fe, Co, Mn), particularly MN_x moiety active sites. Of several possible degradation mechanisms, demetalation and carbon oxidation are found to be the most likely reasons for M‐N‐C catalysts/cathodes degradation.     

ZIF‐8/ZIF‐67‐Derived Co‐Nx‐Embedded 1D Porous Carbon Nanofibers with Graphitic Carbon‐Encased Co Nanoparticles as an Efficient Bifunctional Electrocatalyst

Herein, an approach is reported for fabrication of Co‐N_x‐embedded 1D porous carbon nanofibers (CNFs) with graphitic carbon‐encased Co nanoparticles originated from metal–organic frameworks (MOFs), which is further explored as a bifunctional electrocatalyst for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Electrochemical results reveal that the electrocatalyst prepared by pyrolysis at 1000 °C (CoNC‐CNF‐1000) exhibits excellent catalytic activity toward ORR that favors the four‐electron ORR process and outstanding long‐term stability with 86% current retention after 40 000 s. Meanwhile, it also shows superior electrocatalytic activity toward OER, reaching a lower potential of 1.68 V at 10 mA cm^?2 and a potential gap of 0.88 V between the OER potential (at 10 mA cm^?2) and the ORR half‐wave potential. The ORR and OER performance of CoNC‐CNF‐1000 have outperformed commercial Pt/C and most nonprecious‐metal catalysts reported to date. The remarkable ORR and OER catalytic performance can be mainly attributable to the unique 1D structure, such as higher graphitization degree beneficial for electronic mobility, hierarchical porosity facilitating the mass transport, and highly dispersed CoN_xC active sites functionalized carbon framework. This strategy will shed light on the development of other MOF‐based carbon nanofibers for energy storage and electrochemical devices.