Conductive CoOOH as Carbon‐Free Sulfur Immobilizer to Fabricate Sulfur‐Based Composite for Lithium–Sulfur Battery

Lithium–sulfur battery is recognized as one of the most promising energy storage devices, while the application and commercialization are severely hindered by both the practical gravimetric and volumetric energy densities due to the low sulfur content and tap density with lightweight and nonpolar porous carbon materials as sulfur host. Herein, for the first time, conductive CoOOH sheets are introduced as carbon‐free sulfur immobilizer to fabricate sulfur‐based composite as cathode for lithium–sulfur battery. CoOOH sheet is not only a good sulfur‐loading matrix with high electron conductivity, but also exhibits outstanding electrocatalytic activity for the conversion of soluble lithium polysulfide. With an ultrahigh sulfur content of 91.8 wt% and a tap density of 1.26 g cm^?3, the sulfur/CoOOH composite delivers high gravimetric capacity and volumetric capacity of 1199.4 mAh g^?1_‐composite and 1511.3 mAh cm^?3 at 0.1C rate, respectively. Meanwhile, the sulfur‐based composite presents satisfactory cycle stability with a slow capacity decay rate of 0.09% per cycle within 500 cycles at 1C rate, thanks to the strong interaction between CoOOH and soluble polysulfides. This work provides a new strategy to realize the combination of gravimetric energy density, volumetric energy density, and good electrochemical performance of lithium–sulfur battery.     

Highly Stable Lithium−Sulfur Batteries Promised by Siloxene: An Effective Cathode Material to Regulate the Adsorption and Conversion of Polysulfides

Designing an appropriate cathode is still a challenge for lithium–sulfur batteries (LSBs) to overcome the polysulfides shuttling and sluggish redox reactions. Herein, 2D siloxene nanosheets are developed by a rational wet‐chemistry exfoliation approach, from which S@siloxene@graphene (Si/G) hybrids are constructed as cathodes in Li‐S cells. The siloxene possesses corrugated 2D Si backbone with abundant O grafted in Si₆ rings and hydroxyl‐functionalized surface, which can effectively intercept polysulfides via synergistic effects of chemical trapping capability and kinetically enhanced polysulfides conversion. Theoretical analysis further reveals that siloxene can significantly elevate the adsorption energies and lower energy barrier for Li⁺ diffusion. The LSBs assembled with 2D Si/G hybrid cathodes exhibit greatly enhanced rate performance (919, 759, and 646 mAh g^?1 at 4 C with sulfur loading of 1, 2.9, and 4.2 mg cm^?2, respectively) and superb durability (demonstrated by 1000 cycles with an initial capacity of 951 mAh g^?1 and negligible 0.032% decay rate at 1 C with sulfur loading of 4.2 mg cm^?2). It is expected that the study presented here may open up a new vision toward developing high‐performance LSBs with siloxene for practical applications.     

Functional Mesoporous Carbon‐Coated Separator for Long‐Life,High‐Energy Lithium–Sulfur Batteries

The lithium–sulfur (Li–S) battery is regarded as the most promising rechargeable energy storage technology for the increasing applications of clean energy transportation systems due to its remarkable high theoretical energy density of 2.6 kWh kg^?1, considerably outperforming today's lithium‐ion batteries. Additionally, the use of sulfur as active cathode material has the advantages of being inexpensive, environmentally benign, and naturally abundant. However, the insulating nature of sulfur, the fast capacity fading, and the short lifespan of Li–S batteries have been hampered their commercialization. In this paper, a functional mesoporous carbon‐coated separator is presented for improving the overall performance of Li–S batteries. A straightforward coating modification of the commercial polypropylene separator allows the integration of a conductive mesoporous carbon layer which offers a physical place to localize dissolved polysulfide intermediates and retain them as active material within the cathode side. Despite the use of a simple sulfur–carbon black mixture as cathode, the Li–S cell with a mesoporous carbon‐coated separator offers outstanding performance with an initial capacity of 1378 mAh g^?1 at 0.2 C, and high reversible capacity of 723 mAh g^?1, and degradation rate of only 0.081% per cycle, after 500 cycles at 0.5 C.     

Solid‐State Plastic Crystal Electrolytes: Effective Protection Interlayers for Sulfide‐Based All‐Solid‐State Lithium Metal Batteries

All‐solid‐state lithium metal batteries (ASSLMBs) have attracted significant attention due to their superior safety and high energy density. However, little success has been made in adopting Li metal anodes in sulfide electrolyte (SE)‐based ASSLMBs. The main challenges are the remarkable interfacial reactions and Li dendrite formation between Li metal and SEs. In this work, a solid‐state plastic crystal electrolyte (PCE) is engineered as an interlayer in SE‐based ASSLMBs. It is demonstrated that the PCE interlayer can prevent the interfacial reactions and lithium dendrite formation between SEs and Li metal. As a result, ASSLMBs with LiFePO₄ exhibit a high initial capacity of 148 mAh g^?1 at 0.1 C and 131 mAh g^?1 at 0.5 C (1 C = 170 mA g^?1), which remains at 122 mAh g^?1 after 120 cycles at 0.5 C. All‐solid‐state Li‐S batteries based on the polyacrylonitrile‐sulfur composite are also demonstrated, showing an initial capacity of 1682 mAh g^?1. The second discharge capacity of 890 mAh g^?1 keeps at 775 mAh g^?1 after 100 cycles. This work provides a new avenue to address the interfacial challenges between Li metal and SEs, enabling the successful adoption of Li metal in SE‐based ASSLMBs with high energy density.     

Bimetal–Organic Framework: One‐Step Homogenous Formation and its Derived Mesoporous Ternary Metal Oxide Nanorod for High‐Capacity,High‐Rate,and Long‐Cycle‐Life Lithium Storage

Metal–organic frameworks (MOFs) and relative structures with uniform micro/mesoporous structures have shown important applications in various fields. This paper reports the synthesis of unprecedented mesoporous Ni_xCo_3?xO₄ nanorods with tuned composition from the Co/Ni bimetallic MOF precursor. The Co/Ni‐MOFs are prepared by a one‐step facile microwave‐assisted solvothermal method rather than surface metallic cation exchange on the preformed one‐metal MOF template, therefore displaying very uniform distribution of two species and high structural integrity. The obtained mesoporous Ni_0.3Co_2.7O₄ nanorod delivers a larger‐than‐theoretical reversible capacity of 1410 mAh g^?1 after 200 repetitive cycles at a small current of 100 mA g^?1 with an excellent high‐rate capability for lithium‐ion batteries. Large reversible capacities of 812 and 656 mAh g^?1 can also be retained after 500 cycles at large currents of 2 and 5 A g^?1, respectively. These outstanding electrochemical performances of the ternary metal oxide have been mainly attributed to its interconnected nanoparticle‐integrated mesoporous nanorod structure and the synergistic effect of two active metal oxide components.     

Solid‐State Lithium–Sulfur Battery Enabled by Thio‐LiSICON/Polymer Composite Electrolyte and Sulfurized Polyacrylonitrile Cathode

Solid‐state lithium–sulfur battery (SSLSB) is attractive due to its potential for providing high energy density. However, the cell chemistry of SSLSB still faces challenges such as sluggish electrochemical kinetics and prominent “chemomechanical” failure. Herein, a high‐performance SSLSB is demonstrated by using the thio‐LiSICON/polymer composite electrolyte in combination with sulfurized polyacrylonitrile (S/PAN) cathode. Thio‐LiSICON/polymer composite electrolyte, which processes high ionic conductivity and wettability, is fabricated to enhance the interfacial contact and the performance of lithium metal anodes. S/PAN is utilized due to its unique electrochemical characteristics: electrochemical and structural studies combined with nuclear magnetic resonance spectroscopy and electron paramagnetic resonance characterizations reveal the charge/discharge mechanism of S/PAN, which is the radical‐mediated redox reaction within the sulfur grafted conjugated polymer framework. This characteristic of S/PAN can support alleviating the volume change in the cathode and maintaining fast redox kinetics. The assembled SSLSB full cell exhibits excellent rate performance with 1183 mAh g^?1 at 0.2 C and 719 mAh g^?1 at 0.5 C, respectively, and can accomplish 50 cycles at 0.1 C with the capacity retention of 588 mAh g^?1. The superior performance of the SSLSB cell rationalizes the construction concept and leads to considerations for the innovative design of SSLSB.     

Bifunctional MOF‐Derived Carbon Photonic Crystal Architectures for Advanced Zn–Air and Li–S Batteries: Highly Exposed Graphitic Nitrogen Matters

Nitrogen‐rich porous carbons (NPCs) are the leading cathode materials for next‐generation Zn–air and Li–S batteries. However, most existing NPC suffers from insufficient exposure and harnessing of nitrogen‐dopants (NDs), constraining the electrochemical performance. Herein, by combining silica templating with in situ texturing of metal–organic frameworks, a new bifunctional 3D nitrogen‐rich carbon photonic crystal architecture of simultaneously record‐high total pore volume (13.42 cm³ g^?1), ultralarge surface area (2546 m² g^?1), and permeable hierarchical macro‐meso‐microporosity is designed, enabling sufficient exposure and accessibility of NDs. Thus, when used as cathode catalysts, the Zn–air battery delivers a fantastic capacity of 770 mAh g_Zn^?1 at an unprecedentedly high rate of 120 mA cm^?2, with an ultrahigh power density of 197 mW cm^?2. When hosting 78 wt% sulfur, the Li–S battery affords a high‐rate capacity of 967 mAh g^?1 at 2 C, with superb stability over 1000 cycles at 0.5 C (0.054% decay rate per cycle), comparable to the best literature value. The results prove the dominant role of highly exposed graphitic‐N in boosting both cathode performances.     

Multicore–Shell Bi@N‐doped Carbon Nanospheres for High Power Density and Long Cycle Life Sodium‐ and Potassium‐Ion Anodes

Bismuth (Bi) is an attractive material as anodes for both sodium‐ion batteries (NIBs) and potassium‐ion batteries (KIBs), because it has a high theoretical gravimetric capacity (386 mAh g^?1) and high volumetric capacity (3800 mAh L^?1). The main challenges associated with Bi anodes are structural degradation and instability of the solid electrolyte interphase (SEI) resulting from the huge volume change during charge/discharge. Here, a multicore–shell structured Bi@N‐doped carbon (Bi@N‐C) anode is designed that addresses these issues. The nanosized Bi spheres are encapsulated by a conductive porous N‐doped carbon shell that not only prevents the volume expansion during charge/discharge but also constructs a stable SEI during cycling. The Bi@N‐C exhibits unprecedented rate capability and long cycle life for both NIBs (235 mAh g^?1 after 2000 cycles at 10 A g^?1) and KIBs (152 mAh g^?1 at 100 A g^?1). The kinetic analysis reveals the outstanding electrochemical performance can be attributed to significant pseudocapacitance behavior upon cycling.     

Catalytic Conversion of Polysulfides on Single Atom Zinc Implanted MXene toward High‐Rate Lithium–Sulfur Batteries

Although lithium–sulfur (Li–S) batteries are one of the most promising energy storage devices owing to their high energy densities, the sluggish reaction kinetics and severe shuttle effect of the sulfur cathodes hinder their practical applications. Here, single atom zinc implanted MXene is introduced into a sulfur cathode, which can not only catalyze the conversion reactions of polysulfides by decreasing the energy barriers from Li₂S₄ to Li₂S₂/Li₂S but also achieve strong interaction with polysulfides due to the high electronegativity of atomic zinc on MXene. Moreover, it is found that the homogenously dispersed zinc atoms can also accelerate the nucleation of Li₂S₂/Li₂S on MXene layers during the redox reactions. As a result, the sulfur cathode with single atom zinc implanted MXene exhibits a high reversible capacity of 1136 mAh g^?1. After electrode optimization, a high areal capacity of 5.3 mAh cm^?2, high rate capability of 640 mAh g^?1 at 6 C, and good cycle stability (80% capacity retention after 200 cycles at 4 C) can be achieved.     

Ever‐Increasing Pseudocapacitance in RGO–MnO–RGO Sandwich Nanostructures for Ultrahigh‐Rate Lithium Storage

Lithium ion batteries have attained great success in commercialization owing to their high energy density. However, the relatively delaying discharge/charge severely hinders their high power applications due to intrinsically diffusion‐controlled lithium storage of the electrode. This study demonstrates an ever‐increasing surface redox capacitive lithium storage originating from an unique microstructure evolution during cycling in a novel RGO–MnO–RGO sandwich nanostructure. Such surface pseudocapacitance is dynamically in equilibrium with diffusion‐controlled lithium storage, thereby achieving an unprecedented rate capability (331.9 mAh g^?1 at 40 A g^?1, 379 mAh g^?1 after 4000 cycles at 15 A g^?1) with outstanding cycle stability. The dynamic combination of surface and diffusion lithium storage of electrodes might open up possibilities for designing high‐power lithium ion batteries.     

High Reversible Pseudocapacity in Mesoporous Yolk–Shell Anatase TiO2/TiO2(B) Microspheres Used as Anodes for Li‐Ion Batteries

As an anode material for lithium‐ion batteries, titanium dioxide (TiO₂) shows good gravimetric performance (336 mAh g^?1 for LiTiO₂) and excellent cyclability. To address the poor rate behavior, slow lithium‐ion (Li⁺) diffusion, and high irreversible capacity decay, TiO₂ nanomaterials with tuned phase compositions and morphologies are being investigated. Here, a promising material is prepared that comprises a mesoporous “yolk–shell” spherical morphology in which the core is anatase TiO₂ and the shell is TiO₂(B). The preparation employs a NaCl‐assisted solvothermal process and the electrochemical results indicate that the mesoporous yolk–shell microspheres have high specific reversible capacity at moderate current (330.0 mAh g^?1 at C/5), excellent rate performance (181.8 mAh g^?1 at 40C), and impressive cyclability (98% capacity retention after 500 cycles). The superior properties are attributed to the TiO₂(B) nanosheet shell, which provides additional active area to stabilize the pseudocapacity. In addition, the open mesoporous morphology improves diffusion of electrolyte throughout the electrode, thereby contributing directly to greatly improved rate capacity.     

Hierarchical Defective Fe3‐xC@C Hollow Microsphere Enables Fast and Long‐Lasting Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries present one of the most promising energy storage systems owing to their high energy density and low cost. However, the commercialization of Li–S batteries is still hindered by several technical issues; the notorious polysulfide shuttling and sluggish sulfur conversion kinetics. In this work, unique hierarchical Fe_3‐xC@C hollow microspheres as an advanced sulfur immobilizer and promoter for enabling high‐efficiency Li–S batteries is developed. The porous hollow architecture not only accommodates the volume variation upon the lithiation–delithiation processes, but also exposes vast active interfaces for facilitated sulfur redox reactions. Meanwhile, the mesoporous carbon coating establishes a highly conductive network for fast electron transportation. More importantly, the defective Fe_3‐xC nanosized subunits impose strong LiPS adsorption and catalyzation, enabling fast and durable sulfur electrochemistry. Attributed to these structural superiorities, the obtained sulfur electrodes exhibit excellent electrochemical performance, i.e., high areal capacity of 5.6 mAh cm^?2, rate capability up to 5 C, and stable cycling over 1000 cycles with a low capacity fading rate of 0.04% per cycle at 1 C, demonstrating great promise in the development of practical Li–S batteries.     

Facile Preparation of High‐Content N‐Doped CNT Microspheres for High‐Performance Lithium Storage

Herein, high‐content N‐doped carbon nanotube (CNT) microspheres (HNCMs) are successfully synthesized through simple spray drying and one‐step pyrolysis. HNCM possesses a hierarchically porous architecture and high‐content N‐doping. In particular, HNCM800 (HNCM pyrolyzed at 800 °C) shows high nitrogen content of 12.43 at%. The porous structure derived from well‐interconnected CNTs not only offers a highly conductive network and blocks diffusion of soluble lithium polysulfides (LiPSs) in physical adsorption, but also allows sufficient sulfur infiltration. The incorporation of N‐rich CNTs provides strong chemical immobilization for LiPSs. As a sulfur host for lithium–sulfur batteries, good rate capability and high cycling stability is achieved for HNCM/S cathodes. Particularly, the HNCM800/S cathode delivers a high capacity of 804 mA h g^?1 at 0.5 C after 1000 cycles corresponding to low fading rate (FR) of only 0.011% per cycle. Remarkably, the cathode with high sulfur loading of 6 mg cm^?2 still maintains high cyclic stability (capacity of 555 mA h g^?1 after 1000 cycles, FR 0.038%). Additionally, CNT/Co₃O₄ microspheres are obtained by the oxidation of CNTs/Co in the air. The as‐prepared CNT/Co₃O₄ microspheres are employed as an anode for lithium‐ion batteries and present excellent cycling performance.     

Flexible Electrocatalytic Nanofiber Membrane Reactor for Lithium/Sulfur Conversion Chemistry

Severe lithium polysulfide (LiPS) shuttle effects and sluggish electrochemical conversion kinetics constitute bottlenecks in developing fast‐rechargeable, high‐energy, and high‐power Li/S batteries. Here, a flexible and conductive TiN–Ti₄O₇ core‐shell nanofiber (TiNOC) membrane reactor is designed to electrocatalytically mediate Li/S conversion chemistry. The Ti, N, and O atoms in the nanofiber function as electrocatalysts and chemical confinement active sites to initiate long‐chain LiPS conversion and phase change, as well as to suppress soluble LiPS shuttling. With a sulfur cathode‐membrane reactor module configuration, Li/S cells possess a high sulfur utilization of 91.20%, good rate capability of 869.10 mA h g^?1, and high capacity retention of 92.49%, with a coulomb efficiency of 99.57% after 200 cycles at 5 C. Density functional theory (DFT) calculations revealed that the optimized chemisorption configurations facilitate the elongation of Li? S and S? S bonds, as well as charge transfer along Ti? S and Li? N bonds, which favors bond breakage, bond formation, and the activation of solid‐state S₈, Li₂S₂, and Li₂S. Layer‐by‐layer module stacking provides Li/S batteries with a high areal sulfur loading of 12.00 mg cm^?2 to deliver a high areal capacity of 14.40 mA h cm^?2 at 2.26 mA. Two batteries in series can power real‐world applications such as light emitting diode (LED) bulbs with a high energy output of 69.00 mW h.     

Walnut‐Like Multicore–Shell MnO Encapsulated Nitrogen‐Rich Carbon Nanocapsules as Anode Material for Long‐Cycling and Soft‐Packed Lithium‐Ion Batteries

Metal oxide‐based nanomaterials are widely studied because of their high‐energy densities as anode materials in lithium‐ion batteries. However, the fast capacity degradation resulting from the large volume expansion upon lithiation hinders their practical application. In this work, the preparation of walnut‐like multicore–shell MnO encapsulated nitrogen‐rich carbon nanocapsules (MnO@NC) is reported via a facile and eco‐friendly process for long‐cycling Li‐ion batteries. In this hybrid structure, MnO nanoparticles are uniformly dispersed inside carbon nanoshells, which can simultaneously act as a conductive framework and also a protective buffer layer to restrain the volume variation. The MnO@NC nanocapsules show remarkable electrochemical performances for lithium‐ion batteries, exhibiting high reversible capability (762 mAh g^?1 at 100 mA g^?1) and stable cycling life (624 mAh g^?1 after 1000 cycles at 1000 mA g^?1). In addition, the soft‐packed full batteries based on MnO@NC nanocapsules anodes and commercial LiFePO₄ cathodes present good flexibility and cycling stability.     

Yolk–Shell Structured Assembly of Bamboo‐Like Nitrogen‐Doped Carbon Nanotubes Embedded with Co Nanocrystals and Their Application as Cathode Material for Li–S Batteries

Despite their high theoretical specific capacity (1675 mA h g^?1), the practical application of Li–S batteries remains limited because the capacity rapidly degrades through severe dissolution of lithium polysulfide and the rate capability is low because of the low electronic conductivity of sulfur. This paper describes novel hierarchical yolk–shell microspheres comprising 1D bamboo‐like N‐doped carbon nanotubes (CNTs) encapsulating Co nanoparticles (Co@BNCNTs YS microspheres) as efficient cathode hosts for Li–S batteries. The microspheres are produced via a two‐step process that involves generation of the microsphere followed by N‐doped CNTs growth. The hierarchical yolk–shell structure enables efficient sulfur loading and mitigates the dissolution of lithium polysulfides, and metallic Co and N doping improves the chemical affinity of the microspheres with sulfur species. Accordingly, a Co@BNCNTs YS microsphere‐based cathode containing 64 wt% sulfur exhibits a high discharge capacity of 700.2 mA h g^?1 after 400 cycles at a current density of 1 C (based on the mass of sulfur); this corresponds to a good capacity retention of 76% and capacity fading rate of 0.06% per cycle with an excellent rate performance (752 mA h g^?1 at 2.0 C) when applied as cathode hosts for Li–S batteries.     

In Situ Formation of Copper‐Based Hosts Embedded within 3D N‐Doped Hierarchically Porous Carbon Networks for Ultralong Cycle Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries are promising energy storage systems due to their large theoretical energy density of 2600 Wh kg^?1 and cost effectiveness. However, the severe shuttle effect of soluble lithium polysulfide intermediates (LiPSs) and sluggish redox kinetics during the cycling process cause low sulfur utilization, rapid capacity fading, and a low coulombic efficiency. Here, a 3D copper, nitrogen co‐doped hierarchically porous graphitic carbon network developed through a freeze‐drying method (denoted as 3D Cu@NC‐F) is prepared, and it possesses strong chemical absorption and electrocatalytic conversion activity for LiPSs as highly efficient sulfur host materials in Li–S batteries. The porous carbon network consisting of 2D cross‐linked ultrathin carbon nanosheets provides void space to accommodate volumetric expansion upon lithiation, while the Cu, N‐doping effect plays a critical role for the confinement of polysulfides through chemical bonding. In addition, after sulfuration of Cu@NC‐F network, the in situ grown copper sulfide (Cu_xS) embedded within Cu_xS@NC/S‐F composite catalyzes LiPSs conversion during reversible cycling, resulting in low polarization and fast redox reaction kinetics. At a current density of 0.1 C, the Cu_xS@NC/S‐F composites' electrode exhibits an initial capacity of 1432 mAh g^?1 and maintains 1169 mAh g^?1 after 120 cycles, with a coulombic efficiency of nearly 100%.     

A Flexible 3D Multifunctional MgO‐Decorated Carbon Foam@CNTs Hybrid as Self‐Supported Cathode for High‐Performance Lithium‐Sulfur Batteries

One of the critical challenges to develop advanced lithium‐sulfur (Li‐S) batteries lies in exploring a high efficient stable sulfur cathode with robust conductive framework and high sulfur loading. Herein, a 3D flexible multifunctional hybrid is rationally constructed consisting of nitrogen‐doped carbon foam@CNTs decorated with ultrafine MgO nanoparticles for the use as advanced current collector. The dense carbon nanotubes uniformly wrapped on the carbon foam skeletons enhance the flexibility and build an interconnected conductive network for rapid ionic/electronic transport. In particular, a synergistic action of MgO nanoparticles and in situ N‐doping significantly suppresses the shuttling effect via enhanced chemisorption of lithium polysulfides. Owing to these merits, the as‐built electrode with an ultrahigh sulfur loading of 14.4 mg cm^?2 manifests a high initial areal capacity of 10.4 mAh cm^?2, still retains 8.8 mAh cm^?2 (612 mAh g^?1 in gravimetric capacity) over 50 cycles. The best cycling performance is achieved upon 800 cycles with an extremely low decay rate of 0.06% at 2 C. Furthermore, a flexible soft‐packaged Li‐S battery is readily assembled, which highlights stable electrochemical characteristics under bending and even folding. This cathode structural design may open up a potential avenue for practical application of high‐sulfur‐loading Li‐S batteries toward flexible energy‐storage devices.     

“Brain‐Coral‐Like” Mesoporous Hollow CoS2@N‐Doped Graphitic Carbon Nanoshells as Efficient Sulfur Reservoirs for Lithium–Sulfur Batteries

Hollow carbon materials are considered promising sulfur reservoirs for lithium–sulfur batteries owing to their internal void space and porous conductive shell, providing high loading and utilization of sulfur. Since the pores in carbon materials play a critical role in the infusion of sulfur, access of the electrolyte, and the passage of lithium polysulfides (LPSs), the creation and tuning of hierarchical pore structures is strongly required to improve the electrochemical properties of sulfur/porous carbon composites, but remains a major challenge. Herein, a “brain‐coral‐like” mesoporous hollow carbon nanostructure consisting of an in situ‐grown N‐doped graphitic carbon nanoshell (NGCNs) matrix and embedded CoS₂ nanoparticles as an efficient sulfur host is presented. The rational synthetic design based on metal–organic framework chemistry furnishes unusual multiple porosity in a carbon scaffold with a macrohollow in the core and microhollows and mesopores in the shell, without the use of any surfactant or template. The CoS₂@NGCNs/S composite electrode facilitates high sulfur loading (75 wt%), strong adsorption of LPSs, efficient reaction kinetics, and stable cycle performance (903 mAh g^?1 at 0.1 C after 100 cycles), derived from the synergetic effects of the dual hollow features, chemically active CoS₂, and the conductive and mesoporous N‐doped carbon matrix.     

Optimization of Von Mises Stress Distribution in Mesoporous α‐Fe2O3/C Hollow Bowls Synergistically Boosts Gravimetric/Volumetric Capacity and High‐Rate Stability in Alkali‐Ion Batteries

Hollow structures are often used to relieve the intrinsic strain on metal oxide electrodes in alkali‐ion batteries. Nevertheless, one common drawback is that the large interior space leads to low volumetric energy density and inferior electric conductivity. Here, the von Mises stress distribution on a mesoporous hollow bowl (HB) is simulated via the finite element method, and the vital role of the porous HB structure on strain‐relaxation behavior is confirmed. Then, N‐doped‐C coated mesoporous α‐Fe₂O₃ HBs are designed and synthesized using a multistep soft/hard‐templating strategy. The material has several advantages: (i) there is space to accommodate strains without sacrificing volumetric energy density, unlike with hollow spheres; (ii) the mesoporous hollow structure shortens ion diffusion lengths and allows for high‐rate induced lithiation reactivation; and (iii) the N‐doped carbon nanolayer can enhance conductivity. As an anode in lithium‐ion batteries, the material exhibits a very high reversible capacity of 1452 mAh g^?1 at 0.1 A g^?1, excellent cycling stability of 1600 cycles (964 mAh g^?1 at 2 A g^?1), and outstanding rate performance (609 mAh g^?1 at 8 A g^?1). Notably, the volumetric specific capacity of composite electrode is 42% greater than that of hollow spheres. When used in potassium‐ion batteries, the material also shows high capacity and cycle stability.