CoS Quantum Dot Nanoclusters for High‐Energy Potassium‐Ion Batteries

Potassium‐ion batteries (PIBs) are a promising alternative to lithium‐ion batteries because potassium is an abundant natural resource. To date, PIBs are in the early stages of exploration and only a few anode materials have been investigated. This study reports a cobalt sulfide and graphene (CoS@G) composite as anode electrode for PIBs for the first time. The composite features interconnect quantum dots of CoS nanoclusters uniformly anchored on graphene nanosheets. The coexistence of CoS quantum dot nanoclusters and graphene nanosheets endows the composite with large surface area, highly conductive network, robust structural stability, and excellent electrochemical energy storage performance. An unprecedented capacity of 310.8 mA h g^?1 at 500 mA g^?1 is obtained after 100 cycles, with a rate capability better than an equivalent sodium‐ion batteries (SIBs). This work provides the evidence that PIBs can be a promising alternative to SIBs, especially at high charge–discharge rates. The development of the CoS@G anode material also provides the basis of expanding the library of suitable anode materials for PIBs.     

Rapid Pseudocapacitive Sodium‐Ion Response Induced by 2D Ultrathin Tin Monoxide Nanoarrays

Nanostructured tin‐based anodes are promising for both lithium and sodium ion batteries (LIBs and SIBs), but their performances are limited by the rate capability and long‐term cycling stability. Here, ultrathin SnO nanoflakes arrays are in situ grown on highly conductive graphene foam/carbon nanotubes substrate, forming a unique, flexible, and binder‐free 3D hybrid structure electrode. This electrode exhibits an excellent Na⁺ storage capacity of 580 mAh g^?1 at 0.1 A g^?1, and to the best of our knowledge, has the longest‐reported high‐rate cycling (1000 cycles at 1 A g^?1) among tin‐based SIB anodes. Compared with its LIB performance, the enhanced pseudocapacitive contribution in SIB is proved to be the origin of fast kinetics and long durability of the electrode. Moreover, Raman peaks from the full sodiation product Na₁₅Sn₄ at 75 and 105 cm^?1 are successfully detected and also proved by density functional theory calculations, which could be a promising clue for structure evolution analysis of other tin‐based electrodes.     

A Stable Conversion and Alloying Anode for Potassium‐Ion Batteries: A Combined Strategy of Encapsulation and Confinement

Potassium‐ion batteries based on conversion/alloying reactions have high potential applications in new‐generation large‐scale energy storage. However, their applications are hindered by inherent large‐volume variations and sluggish kinetics of the conversion/alloying‐type electrode materials during the repeated insertion and extraction of bulky K⁺ ions. Although some efforts have been focused on this issue, the reported potassium‐ion batteries still suffer from poor cycling lifespans. Here, a superior stable antimony selenide (Sb₂Se₃) anode is reported for high‐performance potassium‐ion batteries through a combined strategy of conductive encapsulation and 2D confinement. The Sb₂Se₃ nanorods are uniformly coated with a conductive N‐doped carbon layer and then confined between graphene nanosheets. The synergistic effects between conductive coating and confinement effectively buffer the large volumetric variation of the conversion/alloying anodes, which can maintain structural stability for superior cyclability. The as‐prepared anodes exhibit a high reversible specific capacity of ≈590 mA h g^?1 and outstanding cycling stability over 350 cycles. In situ and ex situ characterizations reveal a high structural integration of the large‐volume‐change Sb₂Se₃ anodes during a reversible K storage mechanism of two‐step conversion and multistep alloying processes. This work can open up a new possibility for the design of stable conversion/alloying‐based anodes for high‐performance potassium‐ion batteries.     

Enhanced Reversible Sodium‐Ion Intercalation by Synergistic Coupling of Few‐Layered MoS2 and S‐Doped Graphene

Sodium‐ion batteries (SIBs) are regarded as the best alternative to lithium‐ion batteries due to their low cost and similar Na⁺ insertion chemistry. It is still challenging but greatly desired to design and develop novel electrode materials with high reversible capacity, long cycling life, and good rate capability toward high‐performance SIBs. This work demonstrates an innovative design strategy and a development of few‐layered molybdenum disulfide/sulfur‐doped graphene nanosheets (MoS₂/SG) composites as the SIB anode material providing a high specific capacity of 587 mA h g^?1 calculated based on the total composite mass and an extremely long cycling stability over 1000 cycles at a current density of 1.0 A g^?1 with a high capacity retention of ≈85%. Systematic characterizations reveal that the outstanding performance is mainly attributed to the unique and robust composite architecture where few‐layered MoS₂ and S‐doped graphene are intimately bridged at the hetero‐interface through a synergistic coupling effect via the covalently doped S atoms. The design strategy and mechanism understanding at the molecular level outlined here can be readily applied to other layered transition metal oxides for SIBs anode and play a key role in contributing to the development of high‐performance SIBs.     

Crumpling Carbon-Pillared Atomic-Thin Dichalcogenides and CNTs into Elastic Balls as Superior Anodes for Sodium/Potassium-Ion Batteries

With abundant electroactive sites and rapid ion diffusion paths, ultrathin dichalcogenides such as MoS₂ demonstrate enormous potential as anodes for sodium/potassium-ion batteries (SIBs/PIBs). However, ultrahigh-aspect-ratio nanosheets are very easy to aggregate and re-stack, drastically weakening their intrinsic merits. Here a sustainable dichalcogenide anode is designed via crumpling carbon-pillared atomic-thin MoS₂ nanosheets with CNTs into an elastic ball structure (C-p-MoS₂/CNTs). In this architecture, the glucose-derived carbon pillars atomic-thin MoS₂ nanosheets and broadens interlayer spacing, ensuring fast Na⁺/K⁺ diffusion; CNTs act as 3D scaffolds to impede re-stacking of MoS₂ while providing high-speed pathways for electrons; the integration of flexible atomic-thin sheets and high-toughness CNTs further endows the balls with great elasticity to release the cycling stress. Consequently, the C-p-MoS₂/CNTs material delivers high reversible capacities, outstanding cycling stability, and superior rate performance as anodes for both SIBs and PIBs. Pairing with Na₃V₂(PO₄)₂F₃ cathode, the sodium-ion coin-cell could operate at a rate up to 50 C at high mass loading of 9.4 mg cm⁻² and manifest ultrastable cycling stability at 40 C over 600 cycles. Impressively, the assembled pouch cell can be cycled stably with a high energy density of 188 Wh kg⁻¹. This study is anticipated to provide inspiration for designing innovative metal dichalcogenides as battery anodes.     

Fast Rate and Long Life Potassium‐Ion Based Dual‐Ion Battery through 3D Porous Organic Negative Electrode

Potassium‐based dual ion batteries (K‐DIBs) with potassium cation (K⁺) intercalation graphitic anodes have been investigated for their potential in large‐scale energy storage applications owing to their merits of low cost and environmental friendly. Nonetheless, graphite anodes are plagued by volume expansion from the large K⁺ ions and the co‐intercalation of solvent molecules during the charging. Accordingly, organic materials stand out for the flexible adjustable structures and abundant active sites, which can accommodate cations by multiple functional groups without structural collapse. However, K‐DIBs based on organic anodes have rarely been investigated. Herein, 3D porous dipotassium terephthalate nanosheets are synthesized via a freeze‐dry method as the K‐DIB anode, which can reversibly store K⁺ ions at a fast rate with a high specific capacity and robust stability due to the sufficient redox active sites and diffusion pathways of K⁺ ions in the 3D porous structure. Consequently, a novel K‐DIB configuration combining this fast kinetics organic anode and environmental friendly expanded graphite (EG) cathode is constructed (pK2TP//EG), which exhibits a high specific capacity (68 mAh g^‐1 at 2 C), good rate performance up to 20 C, and long cycling life with a capacity retention ~100% after 2000 cycles, which is the best performance observed among reported K‐DIBs.     

Understanding the Critical Role of Binders in Phosphorus/Carbon Anode for Sodium‐Ion Batteries through Unexpected Mechanism

Polymer binders that combine active materials with conductive agents have played a critical role in maintaining the structural integrity of phosphorus anodes with a huge volume change upon sodiation/desodiation. Herein, the role of binders on the structural/chemical stability of phosphorus/carbon anode is spectroscopically uncovered through unexpected mechanism. Surprisingly, the selection of different binders is found to determine the oxidation degree of active phosphorus in various electrodes, which correlate well with their electrochemical properties. At a high oxidation degree, the electrode applying a conventional poly(vinylidene difluoride) binder displays the worst electrochemical properties, while the electrode using a sodium alginate binder delivers the best electrochemical performance (a highly reversible capacity of 1064 mAh g^?1 with a 90.1% capacity retention at 800 mA g^?1 after 200 cycles and an outstanding rate capability of 401 mAh g^?1 at 8000 mA g^?1) for its negligible oxidation. Additionally, the emergence/decomposition of surface intermediates, including (PO₂)^3? and (PO₄)^3? species, are observed in the discharging/charging processes via the ex situ P K‐edge X‐ray absorption spectroscopies. This novel discovery of the unique role of binders in phosphorus anodes, not only provides an opportunity to ameliorate their electrochemical properties, but also enables their practical applications in high‐energy sodium‐ion batteries.     

Few‐Layer MoSe2 Nanosheets with Expanded (002) Planes Confined in Hollow Carbon Nanospheres for Ultrahigh‐Performance Na‐Ion Batteries

Sodium‐ion batteries (SIBs) are considered as a promising alternative to lithium‐ion batteries, due to the abundant reserves and low price of Na sources. To date, the development of anode materials for SIBs is still confronted with many serious problems. In this work, encapsulation‐type structured MoSe₂@hollow carbon nanosphere (HCNS) materials assembled with expanded (002) planes few‐layer MoSe₂ nanosheets confined in HCNS are successfully synthesized through a facile strategy. Notably, the interlayer spacing of the (002) planes is expanded to 1.02 nm, which is larger than the intrinsic value of pristine MoSe₂ (0.64 nm). Furthermore, the few‐layer nanosheets are space‐confined in the inner cavity of the HCNS, forming hybrid MoSe₂@HCNS structures. When evaluated as anode materials for SIBs, it shows excellent rate capabilities, ultralong cycling life with exceptional Coulombic efficiency even at high current density, maintaining 501 and 471 mA h g^?1 over 1000 cycles at 1 and 3 A g^?1, respectively. Even when cycled at current densities as high as 10 A g^?1, a capacity retention of 382 mA h g^?1 can be achieved. The expanded (002) planes, 2D few‐layer nanosheets, and unique carbon shell structure are responsible for the ultralong cycling and high rate performance.     

Hierarchical NiS2 Modified with Bifunctional Carbon for Enhanced Potassium‐Ion Storage

Potassium‐ion batteries (PIBs) are currently drawing increased attention as a promising alternative to lithium‐ion batteries (LIBs) owing to the abundant resource and low cost of potassium. However, due to the large ionic radius size of K⁺, electrode material that can stably maintain K⁺ insertion/deintercalation is still extremely inadequate, especially for anode material with a satisfactory reversible capacity. As an attempt, nitrogen/carbon dual‐doped hierarchical NiS₂ is introduced as the electrode material in PIBs for the first time. Considering that the introduction of the carbon layer effectively alleviates the volume expansion of the material itself, further improves the electronic conductivity, and finally accelerates the charge transfer of K⁺, not surprisingly, NiS₂ decorated with the bifunctional carbon (NiS₂@C@C) material electrode shows excellent potassium storage performances. When utilized as a PIB anode, it delivers a high reversible capacity of 302.7 mAh g^?1 at 50 mA g^?1 after 100 cycles. The first coulombic efficiency is 78.6% and rate performance is 151.2 mAh g^?1 at 1.6 A g^?1 of the NiS₂@C@C, which are also notable. Given such remarkable electrochemical properties, this work is expected to provide more possibilities for the reasonable design of advanced electrode materials for metal sulfide potassium ion batteries.     

Self‐Assembling of Conductive Interlayer‐Expanded WS2 Nanosheets into 3D Hollow Hierarchical Microflower Bud Hybrids for Fast and Stable Sodium Storage

Transition‐metal dichalcogenides have emerged as promising anodes of sodium ion batteries (SIBs). Their practical SIB application calls for an easy‐to‐handle synthetic technique capable of fabricating favorable properties with high conductivity and stable structure. Here, a solvothermal strategy is reported for bottom‐up self‐assembling of nanoflowers' building block, i.e., conductive interlayer‐expanded 2D WS₂ nanosheets thanks to in situ interlayer modification by nitrogen‐doped carbon matrix, into 3D hollow microflower bud‐like hybrids (H‐WS₂@NC). The 3D nano/microhierarchical hollow structures are constructed by conductive interlayer‐expanded WS₂ nanosheets' building blocks, providing abundant channels facilitating mass transport/electrons transfer, robust protection layer to avoid the direct contact between WS₂ nanosheets and electrolyte, sufficient inner space for accommodating volume variation, and decreased ions diffusion energy barrier for accelerating electrochemical kinetics, as revealed by density functional theory calculations. As such, the 3D H‐WS₂@NC hybrids exhibit quite attractive sodium storage performance with high reversible capacity, superior rate capability, and impressively long cycling life. The 3D H‐WS₂@NC is further verified as anode of sodium‐ion full cell pairing with Na₃V₂(PO4)₃/rGO cathode, delivering a stable reversible capacity of 296 mAh g^?1 at 0.5 A g^?1 with high energy density of 128 Wh kg^?1_total at a power density of 386 W kg^?1_total.     

A Simple Electrode‐Level Chemical Presodiation Route by Solution Spraying to Improve the Energy Density of Sodium‐Ion Batteries

The formation of a solid electrolyte interface (SEI) on the surface of a carbon anode consumes the active sodium ions from the cathode and reduces the energy density of sodium‐ion batteries (SIBs). Herein, a simple electrode‐level presodiation strategy by spraying a sodium naphthaline (Naph‐Na) solution onto a carbon electrode is reported, which compensates the initial sodium loss and improves the energy density of SIBs. After presodiation, an SEI layer is preformed on the surface of carbon anode before battery cycling. It is shown that a large irreversible capacity of 60 mAh g^?1 is replenished and 20% increase of the first‐cycle Coulombic efficiency is achieved for a hard carbon anode using this presodiation strategy, and the energy density of a Na_0.9[Cu_0.22Fe_0.30Mn_0.48]O₂||carbon full cell is increased from 141 to 240 Wh kg^?1 by using the presodiated carbon anode. This simple and scalable electrode‐level chemical presodiation route also shows generality and value for the presodiation of other anodes in SIBs.     

Highly Stretchable Conductive Glue for High‐Performance Silicon Anodes in Advanced Lithium‐Ion Batteries

Binder plays a key role in maintaining the mechanical integrity of electrodes in lithium‐ion batteries. However, the existing binders typically exhibit poor stretchability or low conductivity at large strains, which are not suitable for high‐capacity silicon (Si)‐based anodes undergoing severe volume changes during cycling. Herein, a novel stretchable conductive glue (CG) polymer that possesses inherent high conductivity, excellent stretchablity, and ductility is designed for high‐performance Si anodes. The CG can be stretched up to 400% in volume without conductivity loss and mechanical fracture and thus can accommodate the large volume change of Si nanoparticles to maintain the electrode integrity and stabilize solid electrolyte interface growth during cycling while retaining the high conductivity, even with a high Si mass loading of 90%. The Si‐CG anode has a large reversible capacity of 1500 mA h g^?1 for over 700 cycles at 840 mA g^?1 with a large initial Coulombic efficiency of 80% and high rate capability of 737 mA h g^?1 at 8400 mA g^?1. Moreover, the Si‐CG anode demonstrates the highest achieved areal capacity of 5.13 mA h cm^?2 at a high mass loading of 2 mg cm^?2. The highly stretchable CG provides a new perspective for designing next‐generation high‐capacity and high‐power batteries.     

Self‐Assembly of Flexible Free‐Standing 3D Porous MoS2‐Reduced Graphene Oxide Structure for High‐Performance Lithium‐Ion Batteries

Flexible freestanding electrodes are highly desired to realize wearable/flexible batteries as required for the design and production of flexible electronic devices. Here, the excellent electrochemical performance and inherent flexibility of atomically thin 2D MoS₂ along with the self‐assembly properties of liquid crystalline graphene oxide (LCGO) dispersion are exploited to fabricate a porous anode for high‐performance lithium ion batteries. Flexible, free‐standing MoS₂–reduced graphene oxide (MG) film with a 3D porous structure is fabricated via a facile spontaneous self‐assembly process and subsequent freeze‐drying. This is the first report of a one‐pot self‐assembly, gelation, and subsequent reduction of MoS₂/LCGO composite to form a flexible, high performance electrode for charge storage. The gelation process occurs directly in the mixed dispersion of MoS₂ and LCGO nanosheets at a low temperature (70 °C) and normal atmosphere (1 atm). The MG film with 75 wt% of MoS₂ exhibits a high reversible capacity of 800 mAh g^?1 at a current density of 100 mA g^?1. It also demonstrates excellent rate capability, and excellent cycling stability with no capacity drop over 500 charge/discharge cycles at a current density of 400 mA g^?1.     

Porosity‐ and Graphitization‐Controlled Fabrication of Nanoporous Silicon@Carbon for Lithium Storage and Its Conjugation with MXene for Lithium‐Metal Anode

Silicon (Si) and lithium metal are the most favorable anodes for high‐energy‐density lithium‐based batteries. However, large volume expansion and low electrical conductivity restrict commercialization of Si anodes, while dendrite formation prohibits the applications of lithium‐metal anodes. Here, uniform nanoporous Si@carbon (NPSi@C) from commercial alloy and CO₂ is fabricated and tested as a stable anode for lithium‐ion batteries (LIBs). The porosity of Si as well as graphitization degree and thickness of the carbon layer can be controlled by adjusting reaction conditions. The rationally designed porosity and carbon layer of NPSi@C can improve electronic conductivity and buffer volume change of Si without destroying the carbon layer or disrupting the solid electrolyte interface layer. The optimized NPSi@C anode shows a stable cyclability with 0.00685% capacity decay per cycle at 5 A g^?1 over 2000 cycles for LIBs. The energy storage mechanism is explored by quantitative kinetics analysis and proven to be a capacitance‐battery dual model. Moreover, a novel 2D/3D structure is designed by combining MXene and NPSi@C. As lithiophilic nucleation seeds, NPSi@C can induce uniform Li deposition with buffered volume expansion, which is proven by exploring Li‐metal deposition morphology on Cu foil and MXene@NPSi@C. The practical potential application of NPSi@C and MXene@NPSi@C is evaluated by full cell tests with a Li(Ni_0.8Co_0.1Mn_0.1)O₂ cathode.     

Heterostructured Nanocube‐Shaped Binary Sulfide (SnCo)S2 Interlaced with S‐Doped Graphene as a High‐Performance Anode for Advanced Na+ Batteries

Heterostructuring electrodes with multiple electroactive and inactive supporting components to simultaneously satisfy electrochemical and structural requirements has recently been identified as a viable pathway to achieve high‐capacity and durable sodium‐ion batteries (SIBs). Here, a new design of heterostructured SIB anode is reported consisting of double metal‐sulfide (SnCo)S₂ nanocubes interlaced with 2D sulfur‐doped graphene (SG) nanosheets. The heterostructured (SnCo)S₂/SG nanocubes exhibit an excellent rate capability (469 mAh g^?1 at 10.0 A g^?1) and durability (5000 cycles, 487 mAh g^?1 at 5.0 A g^?1, 92.6% capacity retention). In situ X‐ray diffraction reveals that the (SnCo)S₂/SG anode undergoes a six‐stage Na⁺ storage mechanism of combined intercalation, conversion, and alloying reactions. The first‐principle density functional theory calculations suggest high concentration of p–n heterojunctions at SnS₂/CoS₂ interfaces responsible for the high rate performance, while in situ transmission electron microscopy unveils that the interlacing and elastic SG nanosheets play a key role in extending the cycle life.     

Freestanding Metallic 1T MoS2 with Dual Ion Diffusion Paths as High Rate Anode for Sodium‐Ion Batteries

This work studies for the first time the metallic 1T MoS₂ sandwich grown on graphene tube as a freestanding intercalation anode for promising sodium‐ion batteries (SIBs). Sodium is earth‐abundant and readily accessible. Compared to lithium, the main challenge of sodium‐ion batteries is its sluggish ion diffusion kinetic. The freestanding, porous, hollow structure of the electrode allows maximum electrolyte accessibility to benefit the transportation of Na⁺ ions. Meanwhile, the metallic MoS₂ provides excellent electron conductivity. The obtained 1T MoS₂ electrode exhibits excellent electrochemical performance: a high reversible capacity of 313 mAh g^?1 at a current density of 0.05 A g^?1 after 200 cycles and a high rate capability of 175 mAh g^?1 at 2 A g^?1. The underlying mechanism of high rate performance of 1T MoS₂ for SIBs is the high electrical conductivity and excellent ion accessibility. This study sheds light on using the 1T MoS₂ as a novel anode for SIBs.     

Revealing the Various Electrochemical Behaviors of Sn4P3 Binary Alloy Anodes in Alkali Metal Ion Batteries

Sn₄P₃ binary alloy anode has attracted much attention, not only because of the synergistic effect of P and Sn, but also its universal popularity in alkali metal ion batteries (AIBs), including lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and potassium-ion batteries (PIBs). However, the alkali metal ion (A⁺) storage and capacity attenuation mechanism of Sn₄P₃ anodes in AIBs are not well understood. Herein, a combination of ex situ X-ray diffraction, transmission electron microscopy, and density functional theory calculations reveals that the Sn₄P₃ anode undergoes segregation of Sn and P, followed by the intercalation of A⁺ in P and then in Sn. In addition, differential electrochemical curves and ex situ XPS results demonstrate that the deep insertion of A⁺ in P and Sn, especially in P, contributes to the reduction in capacity of AIBs. Serious sodium metal dendrite growth causes further reduction in the capacity of SIBs, while in PIBs it is the unstable solid electrolyte interphase and sluggish dynamics that lead to capacity decay. Not only the failure mechanism, including structural deterioration, unstable SEI, dendrite growth, and sluggish kinetics, but also the modification strategy and systematic analysis method provide theoretical guidance for the development of other alloy-based anode materials.     

Engineering Hierarchical Hollow Nickel Sulfide Spheres for High‐Performance Sodium Storage

Sodium‐ion batteries (SIBs) are considered as promising alternatives to lithium‐ion batteries (LIBs) for energy storage due to the abundance of sodium, especially for grid distribution systems. The practical implementation of SIBs, however, is severely hindered by their low energy density and poor cycling stability due to the poor electrochemical performance of the existing electrodes. Here, to achieve high‐capacity and durable sodium storage with good rate capability, hierarchical hollow NiS spheres with porous shells composed of nanoparticles are designed and synthesized by tuning the reaction parameters. The formation mechanism of this unique structure is systematically investigated, which is clearly revealed to be Ostwald ripening mechanism on the basis of the time‐dependent morphology evolution. The hierarchical hollow structure provides sufficient electrode/electrolyte contact, shortened Na⁺ diffusion pathways, and high strain‐tolerance capability. The hollow NiS spheres deliver high reversible capacity (683.8 mAh g^?1 at 0.1 A g^?1), excellent rate capability (337.4 mAh g^?1 at 5 A g^?1), and good cycling stability (499.9 mAh g^?1 with 73% retention after 50 cycles at 0.1 A g^?1).     

Electrode Engineering by Atomic Layer Deposition for Sodium‐Ion Batteries: From Traditional to Advanced Batteries

Sodium‐ion batteries (SIBs) have emerged as one of the most promising and competitive energy storage systems due to abundant sodium resources and its environmentally friendly features. However, further improvements in the engineering of the SIB electrode/electrolyte interphase—which directly determines the Na‐ion transfer behavior, material structure stability, and sodiation/desodiation property—are highly recommended to meet the continuously increasing requirements for secondary power sources. Reasonably speaking, to promote SIBs, the advanced and controllable interphase/electrode engineering approach exhibits promise by rationally designing the bulk electrode and generating a well‐defined interphase. Atomic layer deposition (ALD) technology, with atomic‐scale deposition, superior uniformity, excellent conformality, and a self‐limiting nature, is thus expected to address the current challenges facing SIBs in terms of low energy density, limited cycling life, and structural instability, and to promote innovations such as multifunctional electrodes and nanostructured materials for advanced SIBs. This review summarizes and discusses the most recent advancements in the interphase engineering of SIBs by ALD via modifying traditional electrodes and designing advanced electrodes (such as 3D, organic, and protected sodium metal electrodes). Furthermore, based on the recent critical progress and current scientific understanding, future perspectives for the engineering of next‐generation SIB electrodes by ALD can be provided.     

Enhanced Interfacial Stability of Hybrid‐Electrolyte Lithium‐Sulfur Batteries with a Layer of Multifunctional Polymer with Intrinsic Nanoporosity

The use of lithium‐ion conductive solid electrolytes offers a promising approach to address the polysulfide shuttle and the lithium‐dendrite problems in lithium‐sulfur (Li‐S) batteries. One critical issue with the development of solid‐electrolyte Li‐S batteries is the electrode–electrolyte interfaces. Herein, a strategic approach is presented by employing a thin layer of a polymer with intrinsic nanoporosity (PIN) on a Li⁺‐ion conductive solid electrolyte, which significantly enhances the ionic interfaces between the electrodes and the solid electrolyte. Among the various types of Li⁺‐ion solid electrolytes, NASICON‐type Li_1+xAl_xTi_2‐x(PO₄)₃ (LATP) offers advantages in terms of Li⁺‐ion conductivity, stability in ambient environment, and practical viability. However, LATP is susceptible to reaction with both the Li‐metal anode and polysulfides in Li‐S batteries due to the presence of easily reducible Ti⁴⁺ ions in it. The coating with a thin layer of PIN presented in this study overcomes the above issues. At the negative‐electrode side, the PIN layer prevents the direct contact of Li‐metal with the LATP solid electrolyte, circumventing the reduction of LATP by Li metal. At the positive electrode side, the PIN layer prevents the migration of polysulfides to the surface of LATP, preventing the reduction of LATP by polysulfides.