Vertically Aligned Niobium Nanowire Arrays for Fast‐Charging Micro‐Supercapacitors

Planar micro‐supercapacitors are attractive for system on chip technologies and surface mount devices due to their large areal capacitance and energy/power density compared to the traditional oxide‐based capacitors. In the present work, a novel material, niobium nanowires, in form of vertically aligned electrodes for application in high performance planar micro‐supercapacitors is introduced. Specific capacitance of up to 1 kF m^?2 (100 mF cm^?2) with peak energy and power density of 2 kJ m^?2 (6.2 MJ m^?3 or 1.7 mWh cm^?3) and 150 kW m^?2 (480 MW m^?3 or 480 W cm^?3), respectively, is achieved. This remarkable power density, originating from the extremely low equivalent series resistance value of 0.27 Ω (2.49 µΩ m² or 24.9 mΩ cm²) and large specific capacitance, is among the highest for planar micro‐supercapacitors electrodes made of nanomaterials.     

The Road Towards Planar Microbatteries and Micro‐Supercapacitors: From 2D to 3D Device Geometries

The rapid development and further modularization of miniaturized and self‐powered electronic systems have substantially stimulated the urgent demand for microscale electrochemical energy storage devices, e.g., microbatteries (MBs) and micro‐supercapacitors (MSCs). Recently, planar MBs and MSCs, composed of isolated thin‐film microelectrodes with extremely short ionic diffusion path and free of separator on a single substrate, have become particularly attractive because they can be directly integrated with microelectronic devices on the same side of one single substrate to act as a standalone microsized power source or complement miniaturized energy‐harvesting units. The development of and recent advances in planar MBs and MSCs from the fundamentals and design principle to the fabrication methods of 2D and 3D planar microdevices in both in‐plane and stacked geometries are highlighted. Additonally, a comprehensive analysis of the primary aspects that eventually affect the performance metrics of microscale energy storage devices, such as electrode materials, electrolyte, device architecture, and microfabrication techniques are presented. The technical challenges and prospective solutions for high‐energy‐density planar MBs and MSCs with multifunctionalities are proposed.     

Design of Architectures and Materials in In‐Plane Micro‐supercapacitors: Current Status and Future Challenges

The rapid development of integrated electronics and the boom in miniaturized and portable devices have increased the demand for miniaturized and on‐chip energy storage units. Currently thin‐film batteries or microsized batteries are commercially available for miniaturized devices. However, they still suffer from several limitations, such as short lifetime, low power density, and complex architecture, which limit their integration. Supercapacitors can surmount all these limitations. Particularly for micro‐supercapacitors with planar architectures, due to their unique design of the in‐plane electrode finger arrays, they possess the merits of easy fabrication and integration into on‐chip miniaturized electronics. Here, the focus is on the different strategies to design electrode finger arrays and the material engineering of in‐plane micro‐supercapacitors. It is expected that the advances in micro‐supercapacitors with in‐plane architectures will offer new opportunities for the miniaturization and integration of energy‐storage units for portable devices and on‐chip electronics.     

Graphene‐Based Linear Tandem Micro‐Supercapacitors with Metal‐Free Current Collectors and High‐Voltage Output

Printable supercapacitors are regarded as a promising class of microscale power source, but are facing challenges derived from conventional sandwich‐like geometry. Herein, the printable fabrication of new‐type planar graphene‐based linear tandem micro‐supercapacitors (LTMSs) on diverse substrates with symmetric and asymmetric configuration, high‐voltage output, tailored capacitance, and outstanding flexibility is demonstrated. The resulting graphene‐based LTMSs consisting of 10 micro‐supercapacitors (MSs) present efficient high‐voltage output of 8.0 V, suggestive of superior uniformity of the entire integrated device. Meanwhile, LTMSs possess remarkable flexibility without obvious capacitance degradation under different bending states. Moreover, areal capacitance of LTMSs can be sufficiently modulated by incorporating polyaniline‐based pseudocapacitive nanosheets into graphene electrodes, showing enhanced capacitance of 7.6 mF cm^?2. To further improve the voltage output and energy density, asymmetric LTMSs are fabricated through controlled printing of linear‐patterned graphene as negative electrodes and MnO₂ nanosheets as positive electrodes. Notably, the asymmetric LTMSs from three serially connected MSs are easily extended to 5.4 V, triple voltage output of the single cell (1.8 V), suggestive of the versatile applicability of this technique. Therefore, this work offers numerous opportunities of graphene and analogous nanosheets for one‐step scalable fabrication of flexible tandem energy storage devices integrating with printed electronics on same substrate.     

Inkjet‐Printed High‐Performance Flexible Micro‐Supercapacitors with Porous Nanofiber‐Like Electrode Structures

Flexible planar micro‐supercapacitors (MSCs) with unique loose and porous nanofiber‐like electrode structures are fabricated by combining electrochemical deposition with inkjet printing. Benefiting from the resulting porous nanofiber‐like structures, the areal capacitance of the inkjet‐printed flexible planar MSCs is obviously enhanced to 46.6 mF cm^?2, which is among the highest values ever reported for MSCs. The complicated fabrication process is successfully averted as compared with previously reported best‐performing planar MSCs. Besides excellent electrochemical performance, the resultant MSCs also show superior mechanical flexibility. The as‐fabricated MSCs can be highly bent to 180° 1000 times with the capacitance retention still up to 86.8%. Intriguingly, because of the remarkable patterning capability of inkjet printing, various modular MSCs in serial and in parallel can be directly and facilely inkjet‐printed without using external metal interconnects and tedious procedures. As a consequence, the electrochemical performance can be largely enhanced to better meet the demands of practical applications. Additionally, flexible serial MSCs with exquisite and aesthetic patterns are also inkjet‐printed, showing great potential in fashionable wearable electronics. The results suggest a feasible strategy for the facile and cost‐effective fabrication of high‐performance flexible MSCs via inkjet printing.     

One‐Step Synthesis of Monodispersed Mesoporous Carbon Nanospheres for High‐Performance Flexible Quasi‐Solid‐State Micro‐Supercapacitors

Cost‐effective synthesis of carbon nanospheres with a desirable mesoporous network for diversified energy storage applications remains a challenge. Herein, a direct templating strategy is developed to fabricate monodispersed N‐doped mesoporous carbon nanospheres (NMCSs) with an average particle size of 100 nm, a pore diameter of 4 nm, and a specific area of 1093 m² g^?1. Hexadecyl trimethyl ammonium bromide and tetraethyl orthosilicate not only play key roles in the evolution of mesopores but also guide the assembly of phenolic resins to generate carbon nanospheres. Benefiting from the high surface area and optimum mesopore structure, NMCSs deliver a large specific capacitance up to 433 F g^?1 in 1 m H₂SO₄. The NMCS electrodes–based symmetric sandwich supercapacitor has an output voltage of 1.4 V in polyvinyl alcohol/H₂SO₄ gel electrolyte and delivers an energy density of 10.9 Wh kg^?1 at a power density of 14014.5 W kg^?1. Notably, NMCSs can be directly applied through the mask‐assisted casting technique by a doctor blade to fabricate micro‐supercapacitors. The micro‐supercapacitors exhibit excellent mechanical flexibility, long‐term stability, and reliable power output.     

A High‐Performance Lithium‐Ion Capacitor Based on 2D Nanosheet Materials

Lithium‐ion capacitors (LICs) are promising electrical energy storage systems for mid‐to‐large‐scale applications due to the high energy and large power output without sacrificing long cycle stability. However, due to the different energy storage mechanisms between anode and cathode, the energy densities of LICs often degrade noticeably at high power density, because of the sluggish kinetics limitation at the battery‐type anode side. Herein, a high‐performance LIC by well‐defined ZnMn₂O₄‐graphene hybrid nanosheets anode and N‐doped carbon nanosheets cathode is presented. The 2D nanomaterials offer high specific surface areas in favor of a fast ion transport and storage with shortened ion diffusion length, enabling fast charge and discharge. The fabricated LIC delivers a high specific energy of 202.8 Wh kg^?1 at specific power of 180 W kg^?1, and the specific energy remains 98 Wh kg^?1 even when the specific power achieves as high as 21 kW kg^?1.     

A Dynamic Graphene Oxide Network Enables Spray Printing of Colloidal Gels for High‐Performance Micro‐Supercapacitors

Properly controlling the rheological properties of nanoparticle inks is crucial to their printability. Here, it is reported that colloidal gels containing a dynamic network of graphene oxide (GO) sheets can display unusual rheological properties after high‐rate shearing. When mixed with polyaniline nanofiber dispersions, the GO network not only facilitates the gelation process but also serves as an effective energy‐transmission network to allow fast structural recovery after the gel is deformed by high‐rate shearing. This extraordinary fast recovery phenomenon has made it possible to use the conventional air‐brush spray technique to print the gel with high‐throughput and high fidelity on nonplanar flexible surfaces. The as‐printed micro‐supercapacitors exhibit an areal capacitance 4–6 times higher than traditionally spray‐printed ones. This work highlights the hidden potential of 2D materials as functional yet highly efficient rheological enhancers to facilitate industrial processing of nanomaterial‐based devices.     

Direct Laser‐Patterned Micro‐Supercapacitors from Paintable MoS2 Films

Micrometer‐sized electrochemical capacitors have recently attracted attention due to their possible applications in micro‐electronic devices. Here, a new approach to large‐scale fabrication of high‐capacitance, two‐dimensional MoS₂ film‐based micro‐supercapacitors is demonstrated via simple and low‐cost spray painting of MoS₂ nanosheets on Si/SiO₂ chip and subsequent laser patterning. The obtained micro‐supercapacitors are well defined by ten interdigitated electrodes (five electrodes per polarity) with 4.5 mm length, 820 μm wide for each electrode, 200 μm spacing between two electrodes and the thickness of electrode is ～0.45 μm. The optimum MoS₂‐based micro‐supercapacitor exhibits excellent electrochemical performance for energy storage with aqueous electrolytes, with a high area capacitance of 8 mF cm^?2 (volumetric capacitance of 178 F cm^?3) and excellent cyclic performance, superior to reported graphene‐based micro‐supercapacitors. This strategy could provide a good opportunity to develop various micro‐/nanosized energy storage devices to satisfy the requirements of portable, flexible, and transparent micro‐electronic devices.     

Zn‐Ion Hybrid Micro‐Supercapacitors with Ultrahigh Areal Energy Density and Long‐Term Durability

On‐chip micro‐supercapacitors (MSCs), as promising power candidates for microdevices, typically exhibit high power density, large charge/discharge rates, and long cycling lifetimes. However, as for most reported MSCs, the unsatisfactory areal energy density (<10 µWh cm^?2) still hinders their practical applications. Herein, a new‐type Zn‐ion hybrid MSC with ultrahigh areal energy density and long‐term durability is demonstrated. Benefiting from fast ion adsorption/desorption on the capacitor‐type activated‐carbon cathode and reversible Zn stripping/plating on the battery‐type electrodeposited Zn‐nanosheet anode, the fabricated Zn‐ion hybrid MSCs exhibit remarkable areal capacitance of 1297 mF cm^?2 at 0.16 mA cm^?2 (259.4 F g^?1 at a current density of 0.05 A g^?1), landmark areal energy density (115.4 µWh cm^?2 at 0.16 mW cm^?2), and a superb cycling stability without noticeable decay after 10 000 cycles. This work will inspire the fabrication and development of new high‐performance microenergy devices based on novel device design.     

Pencil‐Drawing Skin‐Mountable Micro‐Supercapacitors

In this study, integrated plaster‐like micro‐supercapacitors based on medical adhesive tapes are fabricated by a simple pencil drawing process combined with a mild solution deposition of MnO₂. These solid micro‐supercapacitors not only exhibit excellent stretchability, flexibility, and biocompatibility, but also possess outstanding electrochemical performances, such as exceptional rate capability and cycling stability. Hence they may act as skin‐mountable and thin‐film energy storage devices of high efficiency to power miniaturized and wearable electronic devices.