Two Birds with One Stone: Metal–Organic Framework Derived Micro‐/Nanostructured Ni2P/Ni Hybrids Embedded in Porous Carbon for Electrocatalysis and Energy Storage

The construction of bifunctional electrode materials for hydrogen evolution reaction (HER) and lithium‐ion batteries (LIBs) has been a hot topic of research. Herein, metal–organic frameworks (MOFs) derived micro‐/nanostructured Ni₂P/Ni hybrids with a porous carbon coating (denoted as Ni₂P/Ni@C) are prepared using a feasible pyrolysis–phosphidation strategy. On the one hand, the optimal Ni₂P/Ni@C catalyst exhibits superior HER performance with a low overpotential of 149 mV versus a reversible hydrogen electrode (RHE) at 10 mA cm^?2 and excellent durability. The density functional theory computations verify that the strong synergistic effect between Ni₂P and Ni could optimize the electronic structure, thus rendering the enhanced electrocatalytic performance. On the other hand, the Ni₂P/Ni@C electrode displays a reversible capacity of 597 mAh g^?1 after 1000 cycles at 1000 mA g^?1 and improved rate capability as an anode for LIBs, owing to the well‐organized micro‐/nanostructure and conductive Ni core. In addition, the electrochemical reaction mechanism of the Ni₂P/Ni@C electrode upon lithiation/delithiation is investigated in detail via ex situ X‐ray powder diffraction and X‐ray photoelectron spectroscopy methods. It is expected that the facile and controllable approach can be extended to fabricate other MOF‐based metal phosphides/metal hybrids for electrochemical energy storage and conversion systems.     

A Mixed Lithium‐Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode

Constructing artificial solid‐electrolyte interphase (SEI) on the surface of Li metal is an effective approach to improve ionic conductivity of surface SEI and buffer Li dendrite growth of Li metal anode. However, constructing of homogenous ideal artificial SEI is still a great challenge. Here, a mixed lithium‐ion conductive Li₂S/Li₂Se (denoted as LSSe) protection layer, fabricated by a facile and inexpensive gas–solid reaction, is employed to construct stable surface SEI with high ionic conductivity. The Li₂S/Li₂Se‐protected Li metal (denoted as LSSe@Li) exhibits a stable dendrite‐free cycling behavior over 900 h with a high lithium stripping/plating capacity of 3 mAh cm^?2 at 1.5 mA cm^?2 in the symmetrical cell. Compared to bare Li anode, full batteries paired with LiFePO₄, sulfur/carbon, and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes all present better battery cycling and rate performance when LSSe@Li anode is used. Moreover, Li₂Se exhibits a lower lithium‐ion migration energy barrier in comparison with Li₂S which is proved by density functional theory calculation.     

Fast and Large Lithium Storage in 3D Porous VN Nanowires–Graphene Composite as a Superior Anode Toward High‐Performance Hybrid Supercapacitors

Li‐ion hybrid capacitors (LIHCs), consisting of an energy‐type redox anode and a power‐type double‐layer cathode, are attracting significant attention due to the good combination with the advantages of conventional Li‐ion batteries and supercapacitors. However, most anodes are battery‐like materials with the sluggish kinetics of Li‐ion storage, which seriously restrict the energy storage of LIHCs at the high charge/discharge rates. Herein, vanadium nitride (VN) nanowire is demonstated to have obvious pseudocapacitive characteristic of Li‐ion storage and can get further gains in energy storage through a 3D porous architecture with the assistance of conductive reduced graphene oxide (RGO). The as‐prepared 3D VN–RGO composite exhibits the large Li‐ion storage capacity and fast charge/discharge rate within a wide working widow from 0.01–3 V (vs Li/Li⁺), which could potentially boost the operating potential and the energy and power densities of LIHCs. By employing such 3D VN–RGO composite and porous carbon nanorods with a high surface area of 3343 m² g^?1 as the anode and cathode, respectively, a novel LIHCs is fabricated with an ultrahigh energy density of 162 Wh kg^?1 at 200 W kg^?1, which also remains 64 Wh kg^?1 even at a high power density of 10 kW kg^?1.     

Template‐Based Engineering of Carbon‐Doped Co3O4 Hollow Nanofibers as Anode Materials for Lithium‐Ion Batteries

Co₃O₄ anode materials exhibit poor conductivity and a large volume change, rendering controlling of their nanostructure essential to optimize their lithium storage performance. Carbon‐doped Co₃O₄ hollow nanofibers (C‐doped Co₃O₄ HNFs), for the first time are synthesized using bifunctional polymeric nanofibers as template and carbon source. Compared with undoped Co₃O₄ HNFs and solid Co₃O₄ NFs, C‐doped Co₃O₄ HNFs feature a remarkably high specific capacity, excellent cycling stability, and superior rate capacity as anode materials for lithium‐ion batteries. The superior performance of C‐doped Co₃O₄ HNFs electrodes can be attributed to their structural features, which confer enhanced electron transportation and Li⁺ ion diffusion due to C‐doping, and tolerance for volume change due to the 1D hollow structure. Density functional theory calculations provide a good explanation of the observed enhanced conductivity in C‐doped Co₃O₄ HNFs.     

GeO2 Encapsulated Ge Nanostructure with Enhanced Lithium‐Storage Properties

Germanium (Ge)‐based nanostructures, especially those with germanium dioxide (GeO₂), have drawn great interest for applications in lithium (Li)‐ion batteries due to their ultrahigh theoretical Li⁺ storage capability (8.4 Li/Ge). However, GeO₂ in conventional Ge(s)/GeO₂(c) (where (c) means the core and (s) means the shell) composite anodes with Ge shell outside GeO₂ undergoes an irreversible conversion reaction, which restricts the maximum capacity of such batteries to 1126 mAhg^?1 (the equivalent of storing 4.4 Li⁺). In this work, a porous GeO₂(s)/Ge(c) nanostructure with GeO₂ shell outside Ge cores are successfully fabricated utilizing the Kirkendall effect and used as a lithium‐ion battery anode, giving a substantially improved capacity of 1333.5 mAhg^?1 at a current density of 0.1 Ag^?1 after 30 cycles and a stable long‐time cycle performance after 100 cycles at a current density of 0.5 A g^?1. The enhanced battery performance is attributed to the improved reversibility of GeO₂ lithiation/delithiation processes catalyzed by Ge in the properly structured porous GeO₂(s)/Ge(c) nanostructure.     

Porosity‐ and Graphitization‐Controlled Fabrication of Nanoporous Silicon@Carbon for Lithium Storage and Its Conjugation with MXene for Lithium‐Metal Anode

Silicon (Si) and lithium metal are the most favorable anodes for high‐energy‐density lithium‐based batteries. However, large volume expansion and low electrical conductivity restrict commercialization of Si anodes, while dendrite formation prohibits the applications of lithium‐metal anodes. Here, uniform nanoporous Si@carbon (NPSi@C) from commercial alloy and CO₂ is fabricated and tested as a stable anode for lithium‐ion batteries (LIBs). The porosity of Si as well as graphitization degree and thickness of the carbon layer can be controlled by adjusting reaction conditions. The rationally designed porosity and carbon layer of NPSi@C can improve electronic conductivity and buffer volume change of Si without destroying the carbon layer or disrupting the solid electrolyte interface layer. The optimized NPSi@C anode shows a stable cyclability with 0.00685% capacity decay per cycle at 5 A g^?1 over 2000 cycles for LIBs. The energy storage mechanism is explored by quantitative kinetics analysis and proven to be a capacitance‐battery dual model. Moreover, a novel 2D/3D structure is designed by combining MXene and NPSi@C. As lithiophilic nucleation seeds, NPSi@C can induce uniform Li deposition with buffered volume expansion, which is proven by exploring Li‐metal deposition morphology on Cu foil and MXene@NPSi@C. The practical potential application of NPSi@C and MXene@NPSi@C is evaluated by full cell tests with a Li(Ni_0.8Co_0.1Mn_0.1)O₂ cathode.     

A High‐Energy Li‐Ion Battery Using a Silicon‐Based Anode and a Nano‐Structured Layered Composite Cathode

High capacity electrodes based on a Si composite anode and a layered composite oxide cathode, Ni‐rich Li[Ni_0.75Co_0.1Mn_0.15]O₂, are evaluated and combined to fabricate a high energy lithium ion battery. The Si composite anode, Si/C‐IWGS (internally wired with graphene sheets), is prepared by a scalable sol–gel process. The Si/C‐IWGS anode delivers a high capacity of >800 mAh g^?1 with an excellent cycling stability of up to 200 cycles, mainly due to the small amount of graphene (～6 wt%). The cathode (Li[Ni_0.75Co_0.1Mn_0.15]O₂) is structurally optimized (Ni‐rich core and a Ni‐depleted shell with a continuous concentration gradient between the core and shell, i.e., a full concentration gradient, FCG, cathode) so as to deliver a high capacity (>200 mAh g^?1) with excellent stability at high voltage (～4.3 V). A novel lithium ion battery system based on the Si/C‐IWGS anode and FCG cathode successfully demonstrates a high energy density (240 Wh kg^?1 at least) as well as an unprecedented excellent cycling stability of up to 750 cycles between 2.7 and 4.2 V at 1C. As a result, the novel battery system is an attractive candidate for energy storage applications demanding a high energy density and long cycle life.     

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Lithium‐ion capacitors (LICs) are hybrid energy storage devices that have the potential to bridge the gap between conventional high‐energy lithium‐ion batteries and high‐power capacitors by combining their complementary features. The challenge for LICs has been to improve the energy storage at high charge?discharge rates by circumventing the discrepancy in kinetics between the intercalation anode and capacitive cathode. In this article, the rational design of new nanostructured LIC electrodes that both exhibit a dominating capacitive mechanism (both double layer and pseudocapacitive) with a diminished intercalation process, is reported. Specifically, the electrodes are a 3D interconnected TiC nanoparticle chain anode, synthesized by carbothermal conversion of graphene/TiO₂ hybrid aerogels, and a pyridine‐derived hierarchical porous nitrogen‐doped carbon (PHPNC) cathode. Electrochemical properties of both electrodes are thoroughly characterized which demonstrate their outstanding high‐rate capabilities. The fully assembled PHPNC//TiC LIC device delivers an energy density of 101.5 Wh kg^?1 and a power density of 67.5 kW kg^?1 (achieved at 23.4 Wh kg^?1), and a reasonably good cycle stability (≈82% retention after 5000 cycles) within the voltage range of 0.0?4.5 V.     

Half‐Cell and Full‐Cell Applications of Highly Stable and Binder‐Free Sodium Ion Batteries Based on Cu3P Nanowire Anodes

Sodium‐ion battery (SIB) is especially attractive in cost‐effective energy storage device as an alternative to lithium‐ion battery. Particularly, metal phosphides as potential anodes for SIBs have recently been demonstrated owing to their higher specific capacities compared with those of carbonaceous materials. Unfortunately, most reported metal phosphides consist of irregular particles ranged from several hundreds nanometers to tens of micrometers, thus delivering limited cyclic stability. This paper reports the sodium storage properties of additive‐free Cu₃P nanowire (CPNW) anode directly grown on copper current collector via an in situ growth followed by phosphidation method. Therefore, as a result of its structure features, CPNW anode demonstrates highly stable cycling ability with an ≈70% retention in capacity at the 260th cycle, whereas most reported metal phosphides have limited cycle numbers ranged between 30 and 150. Besides, the reaction mechanism between Cu₃P and Na is investigated by examining the intermediate products at different charge/discharge stages using ex situ X‐ray diffraction measurements. Furthermore, to explore the practical application of CPNW anode, a pouch‐type Na⁺ full cell consisting of CPNW anode and Na₃V₂(PO₄)₃ cathode is assembled and characterized. As a demonstration, a 10 cm × 10 cm light‐emmiting diode (LED) screen is successfully powered by the Na⁺ full cell.     

Controllable Synthesis of a Monophase Nickel Phosphide/Carbon (Ni5P4/C) Composite Electrode via Wet‐Chemistry and a Solid‐State Reaction for the Anode in Lithium Secondary Batteries

A monophase nickel phosphide/carbon (Ni₅P₄/C) composite with a thin carbon shell is controllably synthesized via the two‐step strategy of a wet‐chemistry reaction and a solid‐state reaction. In this fabrication, the further diffusion of phosphorus atoms in the carbon shell during the solid‐state reaction can be responsible for a chemical transformation from a binary phase of Ni₅P₄‐Ni₂P to monophase Ni₅P₄. Galvanostatic charge‐discharge measurements indicate that the Ni₅P₄/C composite exhibits a superior, high rate capacibility and good cycling stability. About 76.6% of the second capacity (644.1 mA h g^?1) can be retained after 50 cycles at a 0.1 C rate. At a high rate of 3 C, the specific capacity of Ni₅P₄/C is still as high as 357.1 mA h g^?1. Importantly, the amorphous carbon shell can enhance the conductivity of the composite and suppress the aggregation of the active particles, leading to their structure stability and reversibility during cycling. As is confirmed from X‐ray‐diffraction analysis, no evident microstructural changes occur upon cycling. These results reveal that highly crystalline Ni₅P₄/C is one of the most promising anode materials for lithium‐ion batteries.     

Van der Waals Forces between S and P Ions at the CoP-C@MoS2/C Heterointerface with Enhanced Lithium/Sodium Storage

Metal–organic framework-derived metal phosphides with high capacity, facile synthesis, and morphology-controlled are considered as potential anodes for lithium/sodium-ion batteries. However, the severe volume expansion during cycling can cause the electrode material to collapse and reduce the cycle life. Here, novel CoP-C@MoS₂/C nanocube composites are synthesized by vapor-phase phosphating and hydrothermal process. As the anode of LIBs, CoP-C@MoS₂/C exhibits outstanding long-cycle performance of 369 mAh g⁻¹ at 10 A g⁻¹ after 2000 cycles. In SIBs, the composite also displays excellent rate capability of 234 mAh g⁻¹ at 5 A g⁻¹ and an ultra-high the capacity retention rate of 90.16% at 1 A g⁻¹ after 1000 cycles. Through density functional theory, it is found that the S ions and P ions at the interface formed by CoP and MoS₂ can serve as Na⁺/Li⁺ diffusion channels with an action of van der Waals force, have attractive characteristics such as high ion adsorption energy, low expansion rate and fast diffusion kinetics compared with MoS₂. This study provides enlightenment for the reasonable design and development of lithium/sodium storage anode materials composited with MOF-derived metal phosphides and metal sulfides.     

A High‐Performance Sodium‐Ion Hybrid Capacitor Constructed by Metal–Organic Framework–Derived Anode and Cathode Materials

Sodium‐ion hybrid capacitors (SIHCs) can potentially combine the virtues of high‐energy density of batteries and high‐power output as well as long cycle life of capacitors in one device. The key point of constructing a high‐performance SIHC is to couple appropriate anode and cathode materials, which can well match in capacity and kinetics behavior simultaneously. In this work, a novel SIHC, coupling a titanium dioxide/carbon nanocomposite (TiO₂/C) anode with a 3D nanoporous carbon cathode, which are both prepared from metal–organic frameworks (MOFs, MIL‐125 (Ti) and ZIF‐8, respectively), is designed and fabricated. The robust architecture and extrinsic pseudocapacitance of TiO₂/C nanocomposite contribute to the excellent cyclic stability and rate capability in half‐cell. Hierarchical 3D nanoporous carbon displays superior capacity and rate performance. Benefiting from the merits of structures and performances of anode and cathode materials, the as‐built SIHC achieves a high energy density of 142.7 W h kg^?1 and a high power output of 25 kW kg^?1 within 1–4 V, as well as an outstanding life span of 10 000 cycles with over 90% of the capacity retention. The results make it competitive in high energy and power–required electricity storage applications.     

Synthesis,Structure Transformation,and Electrochemical Properties of Li2MgSi as a Novel Anode for Li‐lon Batteries

In this work, a novel hexagonal Li₂MgSi anode is successfully prepared through a hydrogen‐driven chemical reaction technique. Electrochemical tests indicate significantly improved cycling stability for the as‐synthesized Li₂MgSi compared with that of Mg₂Si. Ball‐milling treatment induces a polymorphic transformation of Li₂MgSi from a hexagonal structure to a cubic structure, suggesting that the cubic Li₂MgSi is a metastable phase. The post‐24‐h‐milled Li₂MgSi delivers a maximum capacity of 807.8 mAh g^?1, which is much higher than that of pristine Li₂MgSi. In particular, the post‐24‐h‐milled Li₂MgSi retains 50% of its capacity after 100 cycles, which is superior to cycling stability of Mg₂Si. XRD analyses correlated with CV measurements do not demonstrate the dissociation of metallic Mg and/or Li–Mg alloy involved in the lithiation of Mg₂Si for the Li₂MgSi anode, which contributes to the improved lithium storage performance of the Li₂MgSi anode. The findings presented in this work are very useful for the design and synthesis of novel intermetallic compounds for lithium storage as anode materials of Li‐ion batteries.     

An Ultrastable Nonaqueous Potassium‐Ion Hybrid Capacitor

Potassium‐ion hybrid capacitors (PIHCs) show great potential in large‐scale energy storage due to the advantages of electrochemical capacitors and potassium‐ion batteries. However, their development remains at the preliminary stage and is mainly limited by the kinetic imbalance between the two electrodes. Herein, an architecture of NbSe₂ nanosheets embedded in N, Se co‐doped carbon nanofibers (NbSe₂/NSeCNFs) as flexible, free‐standing, and binder‐free anodes for PIHCs is reported. The NbSe₂/NSeCNFs with hierarchically porous structure and N, Se co‐doping afford highly efficient channels for fast transportation of potassium ions and electrons during repeated cycling process. Furthermore, excellent electrochemical reversibility of the NbSe₂/NSeCNFs electrode is demonstrated through in situ XRD, in situ Raman, ex situ transmission electron microscopy and element mapping. Thus, PIHCs with the NbSe₂/NSeCNFs anode and active carbon cathode achieve a high energy of 145 W h kg^?1 at a current density of 50 mA g^?1, as well as an ultra‐long cycle life of over 10 000 cycles at a high current density of 2 A g^?1. These results indicate that the assembled PIHCs display great potential for applications in the field of ultra‐long cycling energy storage devices.     

Ultrathin MoS2 Nanosheets@Metal Organic Framework‐Derived N‐Doped Carbon Nanowall Arrays as Sodium Ion Battery Anode with Superior Cycling Life and Rate Capability

This study reports the design and fabrication of ultrathin MoS₂ nanosheets@metal organic framework‐derived N‐doped carbon nanowall array hybrids on flexible carbon cloth (CC@CN@MoS₂) as a free‐standing anode for high‐performance sodium ion batteries. When evaluated as an anode for sodium ion battery, the as‐fabricated CC@CN@MoS₂ electrode exhibits a high capacity (653.9 mA h g^?1 of the second cycle and 619.2 mA h g^?1 after 100 cycles at 200 mA g^?1), excellent rate capability, and long cycling life stability (265 mA h g^?1 at 1 A g^?1 after 1000 cycles). The excellent electrochemical performance can be attributed to the unique 2D hybrid structures, in which the ultrathin MoS₂ nanosheets with expanded interlayers can provide shortened ion diffusion paths and favorable Na⁺ insertion/extraction space, and the porous N‐doped carbon nanowall arrays on flexible carbon cloth are able to improve the conductivity and maintain the structural integrity. Moreover, the N‐doping‐induced defects also make them favorable for the effective storage of sodium ions, which enables the enhanced capacity and rate performance of MoS₂.     

Flexible Sodium‐Ion Pseudocapacitors Based on 3D Na2Ti3O7 Nanosheet Arrays/Carbon Textiles Anodes

Flexible energy storage devices are critical components for emerging flexible and wearable electronics. Improving the electrochemical performance of flexible energy storage devices depends largely on development of novel electrode architectures and new systems. Here, a new class of flexible energy storage device called flexible sodium‐ion pseudocapacitors is developed based on 3D‐flexible Na₂Ti₃O₇ nanosheet arrays/carbon textiles (NTO/CT) as anode and flexible reduced graphene oxide film (GFs) as cathode without metal current collectors or conducting additives. The NTO/CT anode with advanced electrode architectures is fabricated by directly growing Na₂Ti₃O₇ nanosheet arrays on carbon textiles with robust adhesion through a simple hydrothermal process. The flexible GF//NTO/CT configuration achieves a high energy density of 55 Wh kg^?1 and high power density of 3000 W kg^?1. Taking the fully packaged flexible sodium‐ion pseudocapacitors into consideration, the maximum practical volumetric energy density and power density reach up to 1.3 mWh cm^?3 and 70 mW cm^?3, respectively. In addition, the flexible GF//NTO/CT device demonstrates a stable electrochemical performances with almost 100% capacitance retention under harsh mechanical deformation.     

Approaching the Downsizing Limit of Maricite NaFePO4 toward High‐Performance Cathode for Sodium‐Ion Batteries

Maricite NaFePO₄ nanodots with minimized sizes (≈1.6 nm) uniformly embedded in porous N‐doped carbon nanofibers (designated as NaFePO₄@C) are first prepared by electrospinning for maximized Na‐storage performance. The obtained flexible NaFePO₄@C fiber membrane adherent on aluminum foil is directly used as binder‐free cathode for sodium‐ion batteries, revealing that the ultrasmall nanosize effect as well as a high‐potential desodiation process can transform the generally perceived electrochemically inactive maricite NaFePO₄ into a highly active amorphous phase; meanwhile, remarkable electrochemical performance in terms of high reversible capacity (145 mA h g^?1 at 0.2 C), high rate capability (61 mA h g^?1 at 50 C), and unprecedentedly high cyclic stability (≈89% capacity retention over 6300 cycles) is achieved. Furthermore, the soft package Na‐ion full battery constructed by the NaFePO₄@C nanofibers cathode and the pure carbon nanofibers anode displays a promising energy density of 168.1 Wh kg^?1 and a notable capacity retention of 87% after 200 cycles. The distinctive 3D network structure of very fine NaFePO₄ nanoparticles homogeneously encapsulated in interconnected porous N‐doped carbon nanofibers, can effectively improve the active materials' utilization rate, facilitate the electrons/Na⁺ ions transport, and strengthen the electrode stability upon prolonged cycling, leading to the fascinating Na‐storage performance.     

FeP Quantum Dots Confined in Carbon‐Nanotube‐Grafted P‐Doped Carbon Octahedra for High‐Rate Sodium Storage and Full‐Cell Applications

Transition metal phosphides (TMPs) possess high theoretical sodium storage capacities, but suffer from poor rate performance, due to their intrinsic low conductivity and large volume expansion upon sodiation/desodiation. Compositing TMPs with carbon materials or downsizing their feature size are recognized as efficient approaches to address the above issues. Nevertheless the surface‐controlled capacitive behavior is generally dominated, which inevitably compromises the charge/discharge platform, and decreases the operational potential window in full‐cell constructions. In this work, a novel architecture (FeP@OCF) with FeP quantum dots confined in P‐doped 3D octahedral carbon framework/carbon nanotube is rationally designed. Such structure enables a simultaneous enhancement on the diffusion‐controlled capacity in the platform region (2.3 folds), and the surface‐controlled capacity in the slope region (2.9 folds) as compared to that of pure FeP. As a result, an excellent reversible capacity (674 mAh g^?1@ 0.1 A g^?1) and a record high‐rate performance (262 mAh g^?1 @ 20 A g^?1) are achieved. A full‐cell FeP@OCF// Na₃V₂(PO₄)₃ is also constructed showing an outstandingly high energy density of 185 Wh kg^?1 (based on the total mass of active materials in both electrodes), which outperforms the state‐of‐the art TMP‐based sodium‐ion battery full cells.     

Controlled Design of Well‐Dispersed Ultrathin MoS2 Nanosheets inside Hollow Carbon Skeleton: Toward Fast Potassium Storage by Constructing Spacious “Houses” for K Ions

The large volume expansion induced by K⁺ intercalation is always a big challenge for designing high‐performance electrode materials in potassium‐ion storage system. Based on the idea that large‐sized ions should accommodate big “houses,” a facile‐induced growth strategy is proposed to achieve the self‐loading of MoS₂ clusters inside a hollow tubular carbon skeleton (HTCS). Meantime, a step‐by‐step intercalation technology is employed to tune the interlayer distance and the layer number of MoS₂. Based on the above, the ED‐MoS₂@CT hybrids are achieved by self‐loading and anchoring the well‐dispersed ultrathin MoS₂ nanosheets on the inner surface of HTCSs. This unique compositing model not only alleviates the mechanical strain efficiently, but also provides spacious “roads” (hollow tubular carbon skeleton) and “houses” (interlayer expanded ultrathin MoS₂ sheets) for fast K⁺ transition and storage. As an anode of potassium‐ion batteries, the resultant ED‐MoS₂@CT electrode delivers a high specific capacity of 148.5 mAh g^?1 at 2 A g^?1 after 10 000 cycles with only 0.002% fading per cycle. The assembled ED‐MoS₂@CT//PC potassium‐ion hybrid supercapacitor device shows a high energy density of 148 Wh kg^?1 at a power density of 965 W kg^?1, which is comparable to that of lithium‐ion hybrid supercapacitors.     

Layered P2‐Type K0.65Fe0.5Mn0.5O2 Microspheres as Superior Cathode for High‐Energy Potassium‐Ion Batteries

Potassium‐ion batteries have been regarded as the potential alternatives to lithium‐ion batteries (LIBs) due to the low cost, earth abundance, and low potential of K (?2.936 vs standard hydrogen electrode (SHE)). However, the lack of low‐cost cathodes with high energy density and long cycle life always limits its application. In this work, high‐energy layered P2‐type hierarchical K_0.65Fe_0.5Mn_0.5O₂ (P2‐KFMO) microspheres, assembled by the primary nanoparticles, are fabricated via a modified solvent‐thermal method. Benefiting from the unique microspheres with primary nanoparticles, the K⁺ intercalation/deintercalation kinetics of P2‐KFMO is greatly enhanced with a stabilized cathodic electrolyte interphase on the cathode. The P2‐KFMO microsphere presents a highly reversible potassium storage capacity of 151 mAh g^?1 at 20 mA g^?1, fast rate capability of 103 mAh g^?1 at 100 mA g^?1, and long cycling stability with 78% capacity retention after 350 cycles. A full cell with P2‐KFMO microspheres as cathode and hard carbon as anode is constructed, which exhibits long‐term cycling stability (>80% of retention after 100 cycles). The present high‐performance P2‐KFMO microsphere cathode synthesized using earth‐abundant elements provides a new cost‐effective alternative to LIBs for large‐scale energy storage.