Balancing Ionic and Electronic Conduction for High‐Performance Organic Electrochemical Transistors

Conjugated polymers that support mixed (electronic and ionic) conduction are in demand for applications spanning from bioelectronics to energy harvesting and storage. To design polymer mixed conductors for high‐performance electrochemical devices, relationships between the chemical structure, charge transport, and morphology must be established. A polymer series bearing the same p‐type conjugated backbone with increasing percentage of hydrophilic, ethylene glycol side chains is synthesized, and their performance in aqueous electrolyte gated organic electrochemical transistors (OECTs) is studied. By using device physics principles and electrochemical analyses, a direct relationship is found between the OECT performance and the balanced mixed conduction. While hydrophilic side chains are required to facilitate ion transport—thus enabling OECT operation—swelling of the polymer is not de facto beneficial for balancing mixed conduction. It is shown that heterogeneous water uptake disrupts the electronic conductivity of the film, leading to OECTs with lower transconductance and slower response times. The combination of in situ electrochemical and structural techniques shown here contributes to the establishment of the structure–property relations necessary to improve the performance of polymer mixed conductors and subsequently of OECTs.     

Mixed Conduction in an N-Type Organic Semiconductor in the Absence of Hydrophilic Side-Chains

Organic electrochemical transistors (OECTs) are the building blocks of biosensors, neuromorphic devices, and complementary circuits. One rule in the materials design for OECTs is the inclusion of a hydrophilic component in the chemical structure to enable ion transport in the film. Here, it is shown that the ladder-type, side-chain free polymer poly(benzimidazobenzophenanthroline) (BBL) performs significantly better in OECTs than the donor–acceptor type copolymer bearing hydrophilic ethylene glycol side chains (P-90). A combination of electrochemical techniques reveals that BBL exhibits a more efficient ion-to-electron coupling and higher OECT mobility than P-90. In situ atomic force microscopy scans evidence that BBL, which swells negligibly in electrolytes, undergoes a drastic and permanent change in morphology upon electrochemical doping. In contrast, P-90 substantially swells when immersed in electrolytes and shows moderate morphology changes induced by dopant ions. Ex situ grazing incidence wide-angle X-ray scattering suggests that the particular packing of BBL crystallites is minimally affected after doping, in contrast to P-90. BBL's ability to show exceptional mixed transport is due to the crystallites’ connectivity, which resists water uptake. This side chain-free route for the design of mixed conductors could bring the n-type OECT performance closer to the bar set by their p-type counterparts.     

Combined Optical,Gravimetric, and Electrical Operando Investigation of Structural Variations in Polymeric Mixed Conductors

Bioelectronics based on organic mixed conductors offers tremendous application potential in biological interfacing, drug delivery systems, and neuromorphic devices. The ion injection and water swelling upon electrochemical switching can significantly change the molecular packing of polymeric mixed conductors and thus influence the device performance. Herein, we quantify ion and water injection, and analyze the change of microscopic molecular packing of typical polymeric mixed conducting materials, namely poly(3,4‑ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) and poly(2-(3,3′-bis(2-(2-(2-methoxyethoxy)ethoxy) ethoxy)-[2,2′-bithiophen]-5-yl)thieno[3,2-b]thiophene) (p(g2T-TT)), by integrating electrochemical quartz crystal microbalance with dissipation monitoring, in situ charge accumulation spectroscopy, and electrical current-voltage measurement. The penetration of ions and water can lead to viscous and disordered microstructures in organic mixed conductors and the water uptake property plays a more dominant role in morphological disruption compared with ion uptake is demonstrated. This study demonstrates the potential application of the combined optical, gravimetric, and electrical operando platform in evaluating the structural kinetics of organic mixed conductors and highlights the importance of concertedly tuning the hydration process, structural integrity, and charge transport properties of organic mixed conductors in order to achieve high performance and stable bioelectronic devices.     

Ion Pair Uptake in Ion Gel Devices Based on Organic Mixed Ionic–Electronic Conductors

In organic mixed ionic–electronic conductors (OMIECs), it is critical to understand the motion of ions in the electrolyte and OMIEC. Generally, the focus is on the movement of net charge during gating, and the motion of neutral anion–cation pairs is seldom considered. Uptake of mobile ion pairs by the semiconductor before electrochemical gating (passive uptake) can be advantageous as this can improve device speed, and both ions can participate in charge compensation during gating. Here, such passive ion pair uptake in high-speed solid-state devices is demonstrated using an ion gel electrolyte. This is compared to a polymerized ionic liquid (PIL) electrolyte to understand how ion pair uptake affects device characteristics. Using X-ray photoelectron spectroscopy, the passive uptake of ion pairs from the ion gel into the OMIEC is detected, whereas no uptake is observed with a PIL electrolyte. This is corroborated by X-ray scattering, which reveals morphological changes to the OMIEC from the uptake of ion pairs. With in situ Raman, a reorganization of both anions and cations is then observed during gating. Finally, the speed and retention of OMIEC-based neuromorphic devices are tuned by controlling the freedom of charge motion in the electrolyte.     

Amine‐Functionalized Boron Nitride Nanosheets: A New Functional Additive for Robust,Flexible Ion Gel Electrolyte with High Lithium‐Ion Transference Number

Ion gel electrolytes show great potential in solid‐state batteries attributed to their outstanding characteristics. However, because of the strong ionic nature of ionic liquids, ion gel electrolytes generally exhibit low lithium‐ion transference number, limiting its practical application. Amine‐functionalized boron nitride (BN) nanosheets (AFBNNSs) are used as an additive into ion gel electrolytes for improving their ion transport properties. The AFBNNSs‐ion gel shows much improved mechanical strength and thermal stability. The lithium‐ion transference number is increased from 0.12 to 0.23 due to AFBNNS addition. More importantly, for the first time, nuclear magnetic resonance analysis reveals that the amine groups on the BN nanosheets have strong interaction with the bis(trifluoromethanesulfonyl)imide anions, which significantly reduces the anion mobility and consequently increases lithium‐ion mobility. Battery cells using the optimized AFBNNSs‐ion gel electrolyte exhibit stable lithium deposition and excellent electrochemical performance. A LiFePO₄|Li cell retains 92.2% of its initial specific capacity after the 60th cycle while the cell without AFBNNSs‐gel electrolyte only retains 53.5%. The results not only demonstrate a new strategy to improve lithium‐ion transference number in ionic liquid electrolytes, but also open up a potential avenue to achieve solid‐state lithium metal batteries with improved performance.     

A High‐Potential Anion‐Insertion Carbon Cathode for Aqueous Zinc Dual‐Ion Battery

Aqueous dual‐ion batteries (DIBs) are promising for large‐scale energy storage due to low cost and inherent safety. However, DIBs are limited by low capacity and poor cycling of cathode materials and the challenge of electrolyte decomposition. In this study, a new cathode material of nitrogen‐doped microcrystalline graphene‐like carbon is investigated in a water‐in‐salt electrolyte of 30 m ZnCl₂, where this carbon cathode stores anions reversibly via both electrical double layer adsorption and ion insertion. The (de)insertion of anions in carbon lattice delivers a high‐potential plateau at 1.85 V versus Zn²⁺/Zn, contributing nearly 1/3 of the capacity of 134 mAh g^?1 and half of the stored energy. This study shows that both the unique carbon structure and concentrated ZnCl₂ electrolyte play critical roles in allowing anion storage in carbon cathode for this aqueous DIB.     

Membrane‐Free Detection of Metal Cations with an Organic Electrochemical Transistor

Alkali‐metal ions, particularly sodium (Na⁺) and potassium (K⁺), are the messengers of living cells, governing a cascade of physiological processes through the action of ion channels. Devices that can monitor, in real time, the concentrations of these cations in aqueous media are in demand not only for the study of cellular machinery, but also to detect conditions in the human body that lead to electrolyte imbalance. In this work, conducting polymers are developed that respond rapidly and selectively to varying concentrations of Na⁺ and K⁺ in aqueous media. These polymer films, bearing crown‐ether‐functionalized thiophene units specific to either Na⁺ or K⁺, generate an electrical output proportional to the cation type and concentration. Using electropolymerization, the ion‐selective polymers are integrated as the gate electrode of an organic electrochemical transistor (OECT). The OECT current changes with respect to the concentration of the ion to which the polymer electrode is selective. Designed as a single, miniaturized chip, the OECT enables the selective detection of the cations within a physiologically relevant range. These electrochemical ion sensors require neither ion‐selective membranes nor a reference electrode to operate and have the potential to surpass existing technologies for the detection of alkali‐metal ions in aqueous media.     

Thin,Deformable, and Safety‐Reinforced Plastic Crystal Polymer Electrolytes for High‐Performance Flexible Lithium‐Ion Batteries

A new class of highly thin, deformable, and safety‐reinforced plastic crystal polymer electrolytes (N‐PCPEs) is demonstrated as an innovative solid electrolyte for potential use in high‐performance flexible lithium‐ion batteries with aesthetic versatility and robust safety. The unusual N‐PCPEs are fabricated by combining a plastic crystal polymer electrolyte with a porous polyethylene terephthalate (PET) nonwoven. Herein, the three‐dimensional reticulated plastic crystal polymer electrolyte matrix is formed directly inside the PET nonwoven skeleton via in‐situ UV‐crosslinking of ethoxylated trimethylolpropane triacrylate (ETPTA) monomer, under co‐presence of plastic crystal electrolyte. The PET nonwoven is incorporated as a compliant skeleton to enhance mechanical/dimensional strength of N‐PCPE. Owing to this structural uniqueness, the N‐PCPE shows significant improvements in the film thickness and deformability with maintaining advantageous features (such as high ionic conductivity and thermal stability) of the PCE. Based on structural/physicochemical characterization of N‐PCPE, its potential application as a solid electrolyte for flexible lithium‐ion batteries is explored by scrutinizing the electrochemical performance of cells. The high ionic conductance of N‐PCPE, along with its excellent deformability, plays a viable role in improving cell performance (particularly at high current densities and also mechanically deformed states). Notably, the cell assembled with N‐PCPE exhibits stable electrochemical performance even under a severely wrinkled state, without suffering from internal short‐circuit failures between electrodes.     

Potential‐Specific Structure at the Hematite–Electrolyte Interface

The atomic‐scale structure of the interface between a transition metal oxide and aqueous electrolyte regulates the interfacial chemical reactions fundamental to (photo)electrochemical energy conversion and electrode degradation. Measurements that probe oxide–electrolyte interfaces in situ provide important details of ion and solvent arrangements, but atomically precise structural models do not exist for common oxide–electrolyte interfaces far from equilibrium. Using a novel cell, the structure of the hematite (α‐Fe₂O₃) ()–electrolyte interface is measured under controlled electrochemical bias using synchrotron crystal truncation rod X‐ray scattering. At increasingly cathodic potentials, charge‐compensating protonation of surface oxygen groups increases the coverage of specifically bound water while adjacent water layers displace outwardly and became disordered. Returning to open circuit potential leaves the surface in a persistent metastable state. Therefore, the flux of current and ions across the interface is regulated by multiple electrolyte layers whose specific structure and polarization change in response to the applied potential. The study reveals the complex environment underlying the simplified electrical double layer models used to interpret electrochemical measurements and emphasizes the importance of condition‐specific structural characterization for properly understanding catalytic processes at functional transition metal oxide–electrolyte interfaces.     

Sustainable Dough-Based Gel Electrolytes for Aqueous Energy Storage Devices

Polymer gel electrolytes are usually utilized in various energy storage devices due to their advantages of excellent ionic conductivity and outstanding mechanical properties. However, they are often not biodegradable and lose their flexibility and electrochemical performance during the dehydration/hydration process. Herein, sustainable dough-based gel electrolytes with high biosafety and environmental friendliness are developed. In the dough electrolytes, gluten molecules connect with each other through disulfide bonds to construct gluten network and water that contains abundant ions adheres on it to achieve a continuous ion transport pathway. Therefore, the dough electrolytes possess outstanding mechanical properties and excellent ionic conductivities. More impressively, they also exhibit the ability to recover their electrochemical and mechanical performance after dehydration/hydration cycles as well as the self-adhering, degradable, and edible behaviors. As a proof of concept, the dough electrolytes are used in supercapacitors and zinc-ion batteries. The resultant devices display comparable electrochemical performance in comparison with the counterparts with polymer gel electrolytes. Furthermore, the multiple functions of dough electrolytes are also integrated into the supercapacitors and zinc-ion batteries devices. This work provides a promising route to design highly sustainable gel electrolytes for different aqueous energy storage devices.     

Ionic‐Association‐Assisted Viscoelastic Nylon Electrolytes Enable Synchronously Coupled Interface for Solid Batteries

Electrolyte/electrode heterointerfaces activated by unhindered charge transfer play an important role in solid‐state and flexible batteries. However, continuous electrochemical cycling and mechanical deformations cause structural dislocation and unwanted reactions. An important challenge is to ensure enduring accurate contact between the battery components. The customization of a highly viscoelastic polyamide (PA, nylon)‐based solid electrolyte to address this key issue is presented. The approach involves the use of concentrated aqueous solutions of bis(trifluoromethane)sulfonimide lithium (LiTFSI) to structurally “unzip” and relink pristine hydrogen‐bonded PA chains by bridged cation–anion association. This elaborately tailored crosslinking technique confers upon the resultant electrolyte a combination of the preferred mechanical characteristics including high viscoelasticity and reversible stretchability, together with outstanding electrochemical performance represented by high ion conductivity (2.7 × 10^?4 S cm^?1) and high anodic stability (>3 V vs Zn/Zn²⁺). Flexible batteries with a well‐integrated configuration in which synchronous electrolyte/electrode movement guarantees intimate and compatible interfaces even during extreme deformations and electrochemical stimulations, are further demonstrated. These results reveal a promising opportunity to overcome the bottleneck caused by interfacial defects for next‐generation solid batteries by reconstituting the structure of classical polymers and developing functional electrolytes.     

Defective Engineering Tuning the Analog Switching Linearity and Symmetry of Two-Terminal Artificial Synapse for Neuromorphic Systems

Neuromorphic computing inspired by memristors has gained considerable attention due to its low power and easy integration. However, state-of-the-art two-terminal resistive switching memristors based on conductive filament formation suffer from high variability and poor controllability. As a three-terminal device operated through electrochemistry and dynamic insertion/extraction of ions, the electrochemical ion synapse demonstrates deterministic control of electron conductivity based on ion doping. But, integrating the electrochemical ion synapse into crossbar arrays will pose higher challenges and lower integration density. Herein, inspired by first-principles calculations, a two-terminal bidirectional plasticity electrochemical artificial synapse with integrated lithium polymer electrolyte and polycrystalline tungsten oxide layer is reported. The linearity and stability of the device weight update are greatly improved by adjusting the defect concentration of the polycrystalline WO₃ layer. Even after 16 000 write-read events in the air, its performance remained almost unchanged. Moreover, it has an over-limit protection mechanism under one-way stimulation that exceeds the normal range. Based on this excellent stability, the authors designed and successfully simulated the “muscle memory” that the programmatical organization of the nervous system leads to proficiency in specific actions.     

Fundamental Tradeoff between Emission Intensity and Efficiency in Light‐Emitting Electrochemical Cells

The characteristic doping process in polymer light‐emitting electrochemical cells (LECs) causes a tradeoff between luminescence intensity and efficiency. Experiments and numerical modeling on thin film polymer LECs show that, on the one hand, carrier injection and transport benefit from electrochemical doping, leading to increased electron‐hole recombination. On the other hand, the radiative recombination efficiency is reduced by exciton quenching by polarons involved in the doping. Consequently, the quasi‐steady‐state luminescent efficiency decreases with increasing ion concentration. The transient of the luminescent efficiency shows a characteristic roll‐off while the current continuously increases, attributed to ongoing electrochemical doping and the associated exciton quenching. Both effects can be modeled by exciton polaron‐quenching via diffusion‐assisted Förster resonance energy transfer. These results indicate that the tradeoff between efficiency and intensity is fundamental, suggesting that the application realm of future LECs should be sought in high‐brightness, low‐production cost devices, rather than in high‐efficiency devices.     

Associating and Tuning Sodium and Oxygen Mixed‐Ion Conduction in Niobium‐Based Perovskites

Pure ionic conductors as solid‐state electrolytes are of high interest in electrochemical energy storage and conversion devices. They systematically involve only one ion as the charge carrier. The association of two mobile ionic species, one positively and the other negatively charged, in a specific network should strongly influence the total ion conduction. Nb⁵⁺‐ (4d⁰) and Ti⁴⁺‐based (3d⁰) derived‐perovskite frameworks containing Na⁺ and O^2? as mobile species are investigated as mixed ion conductors by electrochemical impedance spectroscopy. The design of Na⁺ blocking layers via sandwiched pellet sintered by spark plasma sintering at high temperatures leads to quantified transport number of both ionic charge carriers t_Na+ and t_O2?. In the 350–700 °C temperature range, ionic conductivity can be tuned from major Na⁺ contribution (t_Na+ = 88%) for NaNbO₃ to pure O^2? transport in NaNb_0.9Ti_0.1O_2.95 phase. Such a Ti‐substitution is accompanied with a ≈100‐fold increase in the oxygen conductivity, approaching the best values for pure oxygen conductors in this temperature range. Besides the demonstration of tunable mixed ion conduction with quantifiable cationic and anionic contributions in a single solid‐state structure, a strategy is established from structural analysis to develop other architectures with improved mixed ionic conductivity.     

A High‐Performance Graphene Oxide‐Doped Ion Gel as Gel Polymer Electrolyte for All‐Solid‐State Supercapacitor Applications

A high‐performance graphene oxide (GO)‐doped ion gel (P(VDF‐HFP)‐EMIMBF₄‐GO gel) is prepared by exploiting copolymer (poly(vinylidene fluoride‐hexafluoro propylene), P(VDF‐HFP)) as the polymer matrix, ionic liquid (1‐ethyl‐3‐methylimidazolium tetrafluoroborate, EMIMBF₄) as the supporting electrolyte, and GO as the ionic conducting promoter. This GO‐doped ion gel demonstrates significantly improved ionic conductivity compared with that of pure ion gel without the addition of GO, due to the homogeneously distributed GO as a 3D network throughout the GO‐doped ion gel by acting like a ion “highway” to facilitate the ion transport. With the incorporation of only a small amount of GO (1 wt%) in ion gel, there has been a dramatic improvement in ionic conductivity of about 260% compared with that of pure ion gel. In addition, the all‐solid‐state supercapacitor is fabricated and measured at room temperature using the GO‐doped ion gel as gel polymer electrolyte, which demonstrates more superior electrochemical performance than the all‐solid‐state supercapacitor with pure ion gel and the conventional supercapacitor with neat EMIMBF₄, in the aspect of smaller internal resistance, higher capacitance performance, and better cycle stability. These excellent performances are due to the high ionic conductivity, excellent compatibility with carbon electrodes, and long‐term stability of the GO‐doped ion gel.     

Highly‐Cyclable Room‐Temperature Phosphorene Polymer Electrolyte Composites for Li Metal Batteries

Despite significant interest toward solid‐state electrolytes owing to their superior safety in comparison to liquid‐based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high‐power density batteries. Here, a novel quasi‐solid Li⁺ ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm^?2 at room temperature. The cycling overpotential is dropped by 75% in comparison to BP‐free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li⁺ ions around (trifluoromethanesulfonyl)imide (TFSI^?) pairs and ethylene‐oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li⁺ transport through the polymer host. Density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li⁺ ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid‐state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long‐life cycling.     

Circumventing Dedicated Electrolytes in Light‐Emitting Electrochemical Cells

Light‐emitting electrochemical cells (LECs) are devices that utilize efficient ion redistribution to produce high‐efficiency electroluminescence in a simple device architecture. Prototypical polymer LECs utilize three components in the active layer: a luminescent conducting polymer, a salt, and an electrolyte. Similarly, many small‐molecule LECs also utilize an electrolyte to disperse salts. In these systems, the electrolyte is incorporated to efficiently conduct ions and to maintain phase compatibility between all components. However, certain LEC approaches and materials systems enable device operation without a dedicated electrolyte. This review describes the general methods and materials used to circumvent the use of a dedicated electrolyte in LECs. The techniques of synthetically coupling electrolytes, incorporating ionic liquids, and introducing inorganic salts are presented in view of research efforts to date. The use of these techniques in emerging classes of light‐emitting electrochemical cells is also discussed. These approaches have yielded some of the most efficient, long‐lasting, and commercially applicable LECs to date.     

Understanding the Capacitance of PEDOT:PSS

Poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is the most studied and explored mixed ion‐electron conducting polymer system. PEDOT:PSS is commonly included as an electroactive conductor in various organic devices, e.g., supercapacitors, displays, transistors, and energy‐converters. In spite of its long‐term use as a material for storage and transport of charges, the fundamentals of its bulk capacitance remain poorly understood. Generally, charge storage in supercapacitors is due to formation of electrical double layers or redox reactions, and it is widely accepted that PEDOT:PSS belongs to the latter category. Herein, experimental evidence and theoretical modeling results are reported that significantly depart from this commonly accepted picture. By applying a two‐phase, 2D modeling approach it is demonstrated that the major contribution to the capacitance of the two‐phase PEDOT:PSS originates from electrical double layers formed along the interfaces between nanoscaled PEDOT‐rich and PSS‐rich interconnected grains that comprises two phases of the bulk of PEDOT:PSS. This new insight paves a way for designing materials and devices, based on mixed ion‐electron conductors, with improved performance.     

Highly Reversible Anion Redox of Manganese-Based Cathode Material Realized by Electrochemical Ion Exchange for Lithium-Ion Batteries

Anion energy storage provides the possibility to achieve higher specific capacity in lithium-ion battery cathode materials, but the problems of capacity attenuation, voltage degradation, and inconsistent redox behavior are still inevitable. In this paper, a novel O2-type manganese-based layered cathode material Li_x[Li_0.2Mn_0.8]O₂ with a ribbon superlattice structure is prepared by electrochemical ion exchange, which realizes the highly reversible redox of anions and excellent cycle performance. Through low-voltage pre-cycling treatment, the specific capacity of the material can reach 230 mAh g⁻¹ without obvious voltage attenuation. During the electrochemical ion exchange, the precursor with P2 structure transforms into Li_x[Li_0.2Mn_0.8]O₂ with O2 structure through the slippage and shrink of adjacent slabs, and the special superlattice structure in Mn slab is still retained. Simultaneously, a certain degree of lattice mismatch and reversible distortion of the MnO₆ octahedron occur. In addition, the anion redox catalyzes the formation of the solid electrolyte interface, stabilizing the electrode/electrolyte interface and inhibiting the dissolution of Mn. The mechanism of electrochemical ion exchange is systematically studied by comprehensive structural and electrochemical characterization, opening an attractive path for the realization of highly reversible anion redox.