Impact of Nonfullerene Molecular Architecture on Charge Generation,Transport, and Morphology in PTB7‐Th‐Based Organic Solar Cells

Despite the rapid development of nonfullerene acceptors (NFAs), the fundamental understanding on the relationship between NFA molecular architecture, morphology, and device performance is still lacking. Herein, poly[[4,8‐bis[5‐(2‐ethylhexyl)thiophene‐2‐yl]benzo[1,2‐b:4,5‐b0]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]‐thieno[3,4‐b]thiophenediyl]] (PTB7‐Th) is used as the donor polymer to compare an NFA with a 3D architecture (SF‐PDI4) to a well‐studied NFA with a linear acceptor–donor–acceptor (A–D–A) architecture (ITIC). The data suggest that the NFA ITIC with a linear molecular structure shows a better device performance due to an increase in short‐circuit current ( J_sc) and fill factor (FF) compared to the 3D SF‐PDI4. The charge generation dynamics measured by femtosecond transient absorption spectroscopy (TAS) reveals that the exciton dissociation process in the PTB7‐Th:ITIC films is highly efficient. In addition, the PTB7‐Th:ITIC blend shows a higher electron mobility and lower energetic disorder compared to the PTB7‐Th:SF‐PDI4 blend, leading to higher values of J_sc and FF. The compositional sensitive resonant soft X‐ray scattering (R‐SoXS) results indicate that ITIC molecules form more pure domains with reduced domain spacing, resulting in more efficient charge transport compared with the SF‐PDI4 blend. It is proposed that both the molecular structure and the corresponding morphology of ITIC play a vital role for the good solar cell device performance.     

Wide Bandgap Molecular Acceptors with a Truxene Core for Efficient Nonfullerene Polymer Solar Cells: Linkage Position on Molecular Configuration and Photovoltaic Properties

Two wide bandgap star‐shaped small molecular acceptors, para‐TrBRCN and meta‐TrBRCN , are synthesized for efficient nonfullerene polymer solar cells (PSCs). The tiny structural variation by just changing the linkage positions affects largely the inherent properties of the resulting molecules. Both molecules have a nonplanar 3D structure, which can prevent the excessively aggregation to realize the optimized morphology and ideal domain size in their active blends. Compared to para‐TrBRCN , meta‐TrBRCN exhibits the smaller distortions between the truxene skeleton and the benzothiadiazole units, which would also lead to the enhanced π–π stacking and charge transfer. When blending with PTB7‐Th, high power conversion efficiencies (PCEs) of 10.15% and 8.28% are obtained for meta‐TrBRCN and para‐TrBRCN devices, respectively. To make up the weak absorption of above binary active blend in the longer wavelength region and increase the whole device performance further, low bandgap 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone)‐5,5,11,11‐tetrakis(4‐hexylthienyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]‐dithiophene (ITIC‐Th) is added as the second acceptor material to fabricate ternary blend PSCs. After adding 20 wt% of ITIC‐Th, the resulting devices exhibit the well‐balanced optical absorption and fine‐tuned morphology, giving rise to the significantly improved PCE of 11.40% with much higher J _sc of 18.25 mA cm^?2 and fill factor of 70.2%.     

Mechanistic Investigation into Dynamic Function of Third Component Incorporated in Ternary Near‐Infrared Nonfullerene Organic Solar Cells

Organic solar cells (OSCs) consisting of an ultralow‐bandgap nonfullerene acceptor (NFA) with an optical absorption edge that extends to the near‐infrared (NIR) region are of vital interest to semitransparent and tandem devices. However, huge energy‐loss related to inefficient charge dissociation hinders their further development. The critical issues of charge separation as exemplified in NIR‐NFA OSCs based on the paradigm blend of PTB7–Th donor (D) and IEICO–4F acceptor (A) are revealed here. These studies corroborate efficient charge transfer between D and A, accompanied by geminate recombination of photo‐excited charge carriers. Two key factors restricting charge separation are unveiled as the connection discontinuity of individual phases in the blend and long‐lived interfacial charge‐transfer states (CTS). By incorporation of a third‐component of benchmark ITIC or PC₇₁BM with various molar ratios, these two issues are well‐resolved accordingly, yet in distinctly influencing mechanisms. ITIC molecules modulate film morphology to create more continuous paths for charge transportation, whereas PC₇₁BM diminishes CTS and enhances electron transfer at the D/A interfaces. Consequently, the optimal untreated ternary OSCs comprising 0.3 wt% ITIC and 0.1 wt% PC₇₁BM in the blend deliver higher J_SC values of 21.9 and 25.4 mA cm^‐2, and hence increased PCE of 10.2% and 10.6%, respectively.     

Optical,Electrical, and Magnetic Studies of Organic Solar Cells Based on Low Bandgap Copolymer with Spin ½ Radical Additives

The charge photogeneration and recombination processes in organic photovoltaic solar cells based on blend of the low bandgap copolymer, PTB7 (fluorinated poly‐thienothiophene‐benzodithiophene) with C60‐PCBM using optical, electrical, and magnetic measurements in thin films and devices is studied. A variety of steady state optical and magneto‐optical techniques were employed, such as photoinduced absorption (PA), magneto‐PA, doping‐induced absorption, and PA‐detected magnetic resonance (PADMR); as well as picosecond time‐resolved PA. The charge polarons and triplet exciton dynamics in films of pristine PTB7, PTB7/fullerene donor–acceptor (D–A) blend is followed. It is found that a major loss mechanism that limits the power conversion efficiency (PCE) of PTB7‐based solar cell devices is the “back reaction” that leads to triplet exciton formation in the polymer donor from the photogenerated charge‐transfer excitons at the D–A interfaces. A method of suppressing this “back reaction” by adding spin½ radicals Galvinoxyl to the D–A blend is presented; this enhances the cell PCE by ≈30%. The same method is not effective for cells based on PTB7/C70‐PCBM blend, where high PCE is reached even without Galvinoxyl radical additives.     

Efficient Quaternary Organic Solar Cells with Parallel‐Alloy Morphology

Two compatible donors (PBDB‐T and PTB7‐Th) and two miscible acceptors (ITIC and FOIC) are employed to deliver a parallel‐alloy morphology model in non‐fullerene‐based quaternary organic solar cells. PBDB‐T and PTB7‐Th form a parallel link with a slight adjustment of molecular packing into enhanced face‐on crystallites while ITIC disperses into discontinuous FOIC microcrystal regions to form continuous and ordered alloy‐like acceptor phases. Characterization of blend morphology highlights the parallel‐alloy model—enabled by the introduction of PBDB‐T and ITIC, which contributes to improved molecular packing and reduced domain size resulting in efficient charge generation and consistent transport channels. This successful parallel‐alloy quaternary blend morphology demonstrates an enhanced optical absorption, optimized domain size, and nanostructures toward simultaneous improvement in charge transfer and transport. Therefore, a power conversion efficiency of 12.52% is realized for a quaternary device which is 6% higher than the ternary device (PBDB‐T:PTB7‐Th:FOIC) and 12% higher than the binary device (PTB7‐Th:FOIC). Domination of quaternary devices over ternary and binary blends, which is another feasible way to realize highly efficient devices through further investigation of quaternary OSCs, is presented.     

Influence of Molecular Geometry of Perylene Diimide Dimers and Polymers on Bulk Heterojunction Morphology Toward High‐Performance Nonfullerene Polymer Solar Cells

In this study, we investigate the influence of molecular geometry of the donor polymers and the perylene diimide dimers (di‐PDIs) on the bulk heterojunction (BHJ) morphology in the nonfullerene polymer solar cells (PSCs). The results reveal that the pseudo 2D conjugated poly[4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl)] (PTB7‐Th) has better miscibility with both bay‐linked di‐PDI (B‐di‐PDI) and hydrazine‐linked di‐PDI (H‐di‐PDI) compared to its 1D analog, poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7), to facilitate more efficient exciton dissociation in the BHJ films. However, the face‐on oriented π–π stacking of PTB7‐Th is severely disrupted by the B‐di‐PDI due to its more flexible structure. On the contrary, the face‐on oriented π–π stacking is only slightly disrupted by the H‐di‐PDI, which has a more rigid structure to provide suitable percolation pathways for charge transport. As a result, a very high power conversion efficiency (PCE) of 6.41% is achieved in the PTB7‐Th:H‐di‐PDI derived device. This study shows that it is critical to pair suitable polymer donor and di‐PDI‐based acceptor to obtain proper BHJ morphology for achieving high PCE in the nonfullerene PSCs.     

Correlated Donor/Acceptor Crystal Orientation Controls Photocurrent Generation in All‐Polymer Solar Cells

New polymers with high electron mobilities have spurred research in organic solar cells using polymeric rather than fullerene acceptors due to their potential of increased diversity, stability, and scalability. However, all‐polymer solar cells have struggled to keep up with the steadily increasing power conversion efficiency of polymer:fullerene cells. The lack of knowledge about the dominant recombination process as well as the missing concluding picture on the role of the semi‐crystalline microstructure of conjugated polymers in the free charge carrier generation process impede a systematic optimization of all‐polymer solar cells. These issues are examined by combining structural and photo‐physical characterization on a series of poly(3‐hexylthiophene) (donor) and P(NDI2OD‐T2) (acceptor) blend devices. These experiments reveal that geminate recombination is the major loss channel for photo‐excited charge carriers. Advanced X‐ray and electron‐based studies reveal the effect of chloronaphthalene co‐solvent in reducing domain size, altering domain purity, and reorienting the acceptor polymer crystals to be coincident with those of the donor. This reorientation correlates well with the increased photocurrent from these devices. Thus, efficient split‐up of geminate pairs at polymer/polymer interfaces may necessitate correlated donor/acceptor crystal orientation, which represents an additional requirement compared to the isotropic fullerene acceptors.     

Efficient Ternary Organic Solar Cells Enabled by the Integration of Nonfullerene and Fullerene Acceptors with a Broad Composition Tolerance

The ternary structure that combines fullerene and nonfullerene acceptors in a photoactive layer is demonstrated as an effective approach for boosting the power conversion efficiencies (PCEs) of organic solar cells (OSCs). Here, highly efficient ternary OSCs comprising a wide‐bandgap polymer donor (PBT1‐C), a narrow‐bandgap nonfullerene acceptor (IT‐2F), and a typical fullerene derivative (PC₇₁BM) are reported. It is found that the addition of PC₇₁BM into the PBT1‐C:IT‐2F blend not only increases the device efficiency up to 12.2%, but also improves the ambient stability of the OSCs. Detailed investigations indicate that the improvement in photovoltaic performance benefits from synergistic effects of increased photon‐harvesting, enhanced charge separation and transport, suppressed trap‐assisted recombination, and optimized film morphology. Moreover, it is noticed that such a ternary system exhibits excellent tolerance to the PC₇₁BM component, for which PCEs over 11.2% can be maintained throughout the whole blend ratios, higher than that (11.0%) of PBT1‐C:IT‐2F binary reference device.     

Alkoxy‐Functionalized Thienyl‐Vinylene Polymers for Field‐Effect Transistors and All‐Polymer Solar Cells

π‐conjugated polymers based on the electron‐neutral alkoxy‐functionalized thienyl‐vinylene (TVTOEt) building‐block co‐polymerized, with either BDT (benzodithiophene) or T2 (dithiophene) donor blocks, or NDI (naphthalenediimide) as an acceptor block, are synthesized and characterized. The effect of BDT and NDI substituents (alkyl vs alkoxy or linear vs branched) on the polymer performance in organic thin film transistors (OTFTs) and all‐polymer organic photovoltaic (OPV) cells is reported. Co‐monomer selection and backbone functionalization substantially modifies the polymer MO energies, thin film morphology, and charge transport properties, as indicated by electrochemistry, optical spectroscopy, X‐ray diffraction, AFM, DFT calculations, and TFT response. When polymer P7 is used as an OPV acceptor with PTB7 as a donor, the corresponding blend yields TFTs with ambipolar mobilities of μ_e = 5.1 × 10^?3 cm² V^–1 s^–1 and μ_h = 3.9 × 10^?3 cm² V^–1 s^–1 in ambient, among the highest mobilities reported to date for all‐polymer bulk heterojunction TFTs, and all‐polymer solar cells with a power conversion efficiency (PCE) of 1.70%, the highest reported PCE to date for an NDI‐polymer acceptor system. The stable transport characteristics in ambient and promising solar cell performance make NDI‐type materials promising acceptors for all‐polymer solar cell applications.     

Additive‐Morphology Interplay and Loss Channels in “All‐Small‐Molecule” Bulk‐heterojunction (BHJ) Solar Cells with the Nonfullerene Acceptor IDTTBM

Achieving efficient bulk‐heterojunction (BHJ) solar cells from blends of solution‐processable small‐molecule (SM) donors and acceptors is proved particularly challenging due to the complexity in obtaining a favorable donor–acceptor morphology. In this report, the BHJ device performance pattern of a set of analogous, well‐defined SM donors— DR3TBDTT ( DR3 ), SMPV1 , and BTR —used in conjunction with the SM acceptor IDTTBM is examined. Examinations show that the nonfullerene “All‐SM” BHJ solar cells made with DR3 and IDTTBM can achieve power conversion efficiencies (PCEs) of up to ≈4.5% (avg. 4.0%) when the solution‐processing additive 1,8‐diiodooctane (DIO, 0.8% v/v) is used in the blend solutions. The figures of merit of optimized DR3:IDTTBM solar cells contrast with those of “as‐cast” BHJ devices from which only modest PCEs <1% can be achieved. Combining electron energy loss spectrum analyses in scanning transmission electron microscopy mode, carrier transport measurements via “metal‐insulator‐semiconductor carrier extraction” methods, and systematic recombination examinations by light‐dependence and transient photocurrent analyses, it is shown that DIO plays a determining role—establishing a favorable lengthscale for the phase‐separated SM donor–acceptor network and, in turn, improving the balance in hole/electron mobilities and the carrier collection efficiencies overall.     

Charge‐Carrier Dynamics,Mobilities, and Diffusion Lengths of 2D–3D Hybrid Butylammonium–Cesium–Formamidinium Lead Halide Perovskites

Perovskite solar cells (PSCs) have improved dramatically over the past decade, increasing in efficiency and gradually overcoming hurdles of temperature‐ and humidity‐induced instability. Materials that combine high charge‐carrier lifetimes and mobilities, strong absorption, and good crystallinity of 3D perovskites with the hydrophobic properties of 2D perovskites have become particularly promising candidates for use in solar cells. In order to fully understand the optoelectronic properties of these 2D–3D hybrid systems, the hybrid perovskite BA_x(FA_0.83Cs_0.17)_1‐xPb(I_0.6Br_0.4)₃ is investigated across the composition range 0 ≤ x ≤ 0.8. Small amounts of butylammonium (BA) are found that help to improve crystallinity and appear to passivate grain boundaries, thus reducing trap‐mediated charge‐carrier recombination and enhancing charge‐carrier mobilities. Excessive amounts of BA lead to poor crystallinity and inhomogeneous film formation, greatly reducing effective charge‐carrier mobility. For low amounts of BA, the benevolent effects of reduced recombination and enhanced mobilities lead to charge‐carrier diffusion lengths up to 7.7 µm for x = 0.167. These measurements pave the way for highly efficient, highly stable PSCs and other optoelectronic devices based on 2D–3D hybrid materials.     

Acceptor-rich bulk heterojunction polymer solar cells with balanced charge mobilities

In this work, we reported efficient polymer solar cells with balanced hole/electron mobilities tuned by the acceptor content in bulk heterojunction blend films. The photovoltaic cells were fabricated with two new wide band-gap D-A polymers PBDDIDT and PBDDIDTT as the donor material. The molecular conformations of new polymers are carefully evaluated by theoretical calculations. The results of photovoltaic studies show that two devices reach their optimal conditions with rich PC₇₁BM content up to 80% in blend films, which is uncommon with most of reported PSCs. The as-cast devices based on PBDDIDT and PBDDIDTT reveal good photovoltaic performance with PCE of 7.04% and 6.40%, respectively. The influence of PC₇₁BM content on photovoltaic properties is further detailed studied by photoluminescence emission spectra, charge mobilities and heterojunction morphology. The results exhibit that more efficient charge transport between donor and acceptor occurs in rich PC₇₁BM blend films. Meanwhile, the hole and electron mobilities are simultaneously enhanced and afford a good balance in rich PC₇₁BM blend films (D/A, 1:4) which is critical for the improvement of current density and fill factors.     

As‐Cast Ternary Organic Solar Cells Based on an Asymmetric Side‐Chains Featured Acceptor with Reduced Voltage Loss and 14.0% Efficiency

A new small‐molecule nonfullerene acceptor based on the benzo[1,2‐b:4,5‐b′]dithiophene (BDT) fused central core with asymmetrical alkoxy and thienyl side chains, namely TOBDT , is designed and synthesized. The alkoxy unit helps narrow the bandgap, and thienyl side chain helps enhance the intermolecular interaction. As a result, TOBDT is suitable to match the deep‐lying highest occupied molecular orbital (HOMO) of polymer donor PM6 . Then, a strong crystalline acceptor IDIC is introduced as the third component to fabricate as‐cast nonfullerene ternary devices to achieve absorption and morphology control. Addition of IDIC not only mixes well with TOBDT but modulates the morphology of the blend film, which helps to balance the charge transport properties and reduce the photovoltage loss of ternary devices. All these contribute to synergetic improvement of J_sc, V_oc, and fill factor parameters, leading to a power conversion efficiency of 14.0% for the as‐cast fullerene‐free ternary device.     

Semi-transparent organic solar cells with high visible transmission enabled by a transparent wide-bandgap donor

The reported semi-transparent organic solar cells (ST-OSCs) are commonly based on a middle bandgap donor and narrow bandgap acceptor blend, for example, the PTB7-Th:Y6 blend. However, the strong absorption of PTB7-Th in the visible region hinders the further improvement of average visible transmission (AVT) for the ST-OSCs. Here we report a new kind of all-small-molecule ST-OSCs based on TAPC:Y6 blend. The used donor TAPC has little absorption in the visible region, which is beneficial for attaining high transparency. The optimized ST-OSCs based on TAPC:Y6 blend realize a power conversion efficiency of 3.01%. Importantly, a high AVT of 47.99% is achieved for this kind of ST-OSCs, much higher than those of reported ST-OSCs. The proposed TAPC:Y6 ST-OSCs also have a good color perception, whose CIE 1931 coordinates are (0.292,0.313) and color rendering index is 94.5.     

Molecular Consideration for Small Molecular Acceptors Based on Ladder‐Type Dipyran: Influences of O‐Functionalization and π‐Bridges

Molecular engineering of nonfullerene acceptors (NFAs) plays a vital role in the development of organic photovoltaics. Oxygen as an electron donating atom is incorporated into the NFA system as alkoxyl forms at central, terminal, or central conjugated moieties due to the tunability at structural conformation, solubility, electron donating ability, absorption, energy levels, etc. In this work, a novel dipyran‐based ladder‐type building block ( Ph‐DTDP ), which possesses two oxygen atoms in the conjugated skeleton, is designed and facilely synthesized. It is applied as the donor core for the acceptor–donor–acceptor‐type NFA design and such functionalized‐O efficiently enhances the electron donating ability, lowers the band gap, redshifts and extends the absorption spectra. In addition, the π‐bridge effects are considered as well. Photovoltaic performances are systematically investigated and a high power conversion efficiency of 9.21% can be afforded with an energy loss of 0.57 eV. Meanwhile, the morphologies as well as the carrier mobilities of the blend films are studied to assist further understanding of the structure–property relationships. Overall, the study in this work provides a new promising ladder‐type dipyran building block and brings in a novel way to use oxygen in NFA molecular structure design.     

Cubic‐Like Bimolecular Crystal Evolution and over 12% Efficiency in Halogen‐Free Ternary Solar Cells

In this study, the solubility properties of a given ternary blend set, with two donors (poly(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)benzo[1,2‐b;4,5‐b′]dithiophene‐2,6‐diyl‐alt‐(4‐(2‐ethylhexyl)‐3‐fluorothieno[3,4‐b]thiophene‐)‐2‐carboxylate‐2‐6‐diyl (PTB7‐Th) and benzo[1,2‐b;4,5‐b′]dithiophene‐based small molecule (DR3TSBDT)) and one acceptor ([6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM)), in a series of solvents are determined, and active material–solvent interactions are used as an aid for finding suitable nonchlorinated solvents to achieve effective ternary organic solar cells (OSCs) based on PTB7‐Th:DR3TSBDT:PC₇₁BM. An exceptional power conversion efficiency (PCE) as high as 12.3% (certified 11.94%) is obtained using the developed nonhalogenated processing system. In‐depth investigations (morphology, charge mobility, recombination dynamics, and OSC characteristics) uncover the underlying structure–property relationships as a function of the chosen nonhalogenated systems. Another intriguing finding of this study is the formation of a cubic bimolecular crystal structure of PTB7‐Th:PC₇₁BM in a nonhalogenated system, which is the first such demonstration in blend films. This sheds light upon the fact that the physical properties of a material applied from different solutions may surpass the variation in the properties between two material having totally different molecular structure. Therefore, this work not only offers important scientific insights into developing highly efficient and eco‐friendly OSCs but also improves our understanding of achievable bimolecular crystals with an intercalated structure.     

Fused Cyclopentadithienothiophene Acceptor Enables Ultrahigh Short‐Circuit Current and High Efficiency >11% in As‐Cast Organic Solar Cells

A new method to synthesize an electron‐rich building block cyclopentadithienothiophene (9H‐thieno‐[3,2‐b]thieno[2″,3″:4′,5′]thieno[2′,3′:3,4]cyclopenta[1,2‐d]thiophene, CDTT) via a facile aromatic extension strategy is reported. By combining CDTT with 1,1‐dicyanomethylene‐3‐indanone endgroups, a promising nonfullerene small molecule acceptor (CDTTIC) is prepared. As‐cast, single‐junction nonfullerene organic solar cells based on PFBDB‐T: CDTTIC blends exhibit very high short‐circuit currents up to 26.2 mA cm^?2 in combination with power conversion efficiencies over 11% without any additional processing treatments. The high photocurrent results from the near‐infrared absorption of the CDTTIC acceptor and the well‐intermixed blend morphology of polymer donor PFBDB‐T and CDTTIC. This work demonstrates a useful fused ring extension strategy and promising solar cell results, indicating the great potential of the CDTT derivatives as electron‐rich building blocks for constructing high‐performance small molecule acceptors in organic solar cells.     

Revealing the Impact of F4‐TCNQ as Additive on Morphology and Performance of High‐Efficiency Nonfullerene Organic Solar Cells

Fluorinated molecule 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F4‐TCNQ) and its derivatives have been used in polymer:fullerene solar cells primarily as a dopant to optimize the electrical properties and device performance. However, the underlying mechanism and generality of how F4‐TCNQ affects device operation and possibly the morphology is poorly understood, particularly for emerging nonfullerene organic solar cells. In this work, the influence of F4‐TCNQ on the blend film morphology and photovoltaic performance of nonfullerene solar cells processed by a single halogen‐free solvent is systematically investigated using a set of morphological and electrical characterizations. In solar cells with a high‐performance polymer:small molecule blend FTAZ:IT‐M, F4‐TCNQ has a negligibly small effect on the molecular packing and surface characteristics, while it clearly affects the electronic properties and mean‐square composition variation of the bulk. In comparison to the control devices with an average power conversion efficiency (PCE) of 11.8%, inclusion of a trace amount of F4‐TCNQ in the active layer has improved device fill factor and current density, which has resulted into a PCE of 12.4%. Further increase in F4‐TCNQ content degrades device performance. This investigation aims at delineating the precise role of F4‐TCNQ in nonfullerene bulk heterojunction films, and thereby establishing a facile approach to fabricate highly optimized nonfullerene solar cells.     

Conformation Locking on Fused‐Ring Electron Acceptor for High‐Performance Nonfullerene Organic Solar Cells

In this work, sidechain engineering on conjugated fused‐ring acceptors for conformation locking is demonstrated as an effective molecular design strategy for high‐performance nonfullerene organic solar cells (OSCs). A novel nonfullerene acceptor (ITC6‐IC) is designed and developed by introducing long alkyl chains into the terminal electron‐donating building blocks. ITC6‐IC has achieved definite conformation with a planar structure and better solubility in common organic solvents. The weak electron‐donating hexyl upshifts the lowest unoccupied molecular orbital level of ITC6‐IC, resulting in a higher V_OC in comparison to the widely used ITIC. The OSCs based on PBDB‐T:ITC6‐IC reveal a promising power conversion efficiency of 11.61% and an expected high V_OC of 0.97 V. The weaker π–π stacking induced by steric hindrance affords ITC6‐IC with enhanced compatibility with polymer donors. The blend film treated with suitable thermal annealing exhibits a fibril crystallization feature with a good bicontinuous network morphology. The results indicate that the molecular design approach of ITC6‐IC can be inspirational for future development of nonfullerene acceptors for high efficiency OSCs.     

Diketopyrrolopyrrole based highly crystalline conjugated molecules for application in small molecule donor-polymer acceptor nonfullerene organic solar cells

In order to specifically investigate the low efficiency of small molecule donor-polymer acceptor (M-P) nonfullerene organic solar cells, we have successfully modify the synthesis of a series of D-π-A-π-D conjugated molecules containing diketopyrrolopyrrole (DPP) and different end groups. By incorporation of end group with different size of π-conjugation (benzene, naphthalene and pyrene), we further improved the fill factor (FF) and short current density (J_sc) of the donors molecule. Our experimental results and theoretical calculations have proven that the size of the end groups can influence the molecule crystallinity, mobility and intermolecular packing by altering the molecular coplanarity. As the result of improved crystallinity, morphology and fine-tuned mobilities, we demonstrated an increased FF, a high J_sc of ∼4.5 mA/cm² and a power conversion efficiency of 2.05%, which is among the highest efficiency reported for M-P nonfullerene solar cells. Our results provide opportunities and possibilities of achieving higher performance M-P nonfullerene solar cells in the future.