Highly Efficient Circularly Polarized Electroluminescence from Aggregation‐Induced Emission Luminogens with Amplified Chirality and Delayed Fluorescence

Development of highly efficient circularly polarized organic light‐emitting diodes (CPOLEDs) has gained increasing interest as they show improved luminous efficiency and high contract 3D images in OLED displays. In this work, a series of binaphthalene‐containing luminogenic enantiomers with aggregation‐induced emission (AIE) and delayed fluorescence properties is designed and synthesized. These molecules can emit from green to red light depending on the solvent polarity due to the twisted intramolecular charge transfer effect. However, their solid powders show bright light emissions, demonstrating a phenomenon of AIE. All the molecules exhibit Cotton effects and circularly polarized luminescence in toluene solution and films. Multilayer CPOLEDs using the doped and neat films of the molecules as emitting layers are fabricated, which exhibit high external quantum efficiency of up to 9.3% and 3.5% and electroluminescence dissymmetry factor (g_EL) of up to +0.026/?0.021 and +0.06/?0.06, respectively. Compared with doped CPOLEDs, the nondoped ones show higher g_EL and much smaller current efficiency roll‐off due to the stronger AIE effect. By altering the donor unit, the electroluminescence maximum of the doped film can vary from 493 to 571 nm. As far as it is known, this is the first example of efficient CPOLEDs based on small chiral organic molecules.     

Symmetry‐Breaking Response of Azo Molecular Glass Microspheres to Interfering Circularly Polarized Light: From Shape Manipulation to 3D Patterning

This work investigates symmetry‐breaking deformation of azo molecular glass microspheres induced by interfering circularly polarized light, and related particle shape manipulation as well as 3D patterning. The isolated microspheres and microsphere monolayers are obtained from an azo molecular glass (IA‐Chol) by the solution dispersion method and soft‐lithography, respectively. Unique symmetry‐breaking deformation is observed for the microspheres upon exposure to the spatially modulated light field, which is produced by interference of two orthogonally polarized laser beams with the right‐circular polarization (RCP) and left‐circular polarization (LCP). Two distinct deformation modes are developed upon the irradiation with the interfering beams in RCP:LCP and LCP:RCP superposition manners, respectively. The unique morphologies with the symmetry‐breaking characteristics are caused by mass transfer induced by the light irradiation. For the microsphere monolayers, the deformations of the microspheres not only capture and record the polarization states of the light field, but also create various surface patterns combining the symmetry‐breaking deformations and periodic surface modulation. A variety of unique surface patterns are obtained by irradiation with the interfering circularly polarized waves with the orthogonal and also the same‐handed polarizations. The material and methodology developed in this study are promising for applications in sensing, optics, responsive surfaces, and others.     

Facile Assembly of High‐Quality Organic–Inorganic Hybrid Perovskite Quantum Dot Thin Films for Bright Light‐Emitting Diodes

Organic‐inorganic hybrid perovskite (CH₃NH₃PbX₃, X = Cl, Br or I) quantum dots (QDs) have shown superior optoelectronic properties and have been regarded as a most ideal material for next‐generation optoelectronic devices, particularly for QDs‐based light‐emitting diodes (QLEDs). However, there are only a few reports on CH₃NH₃PbX₃ QLEDs and the reported performance is still very poor, primarily due to the difficulties in the fabrication of high‐quality compact QDs thin films. In this work, an electric‐field‐assisted strategy is developed for efficient fabrication of uniform CH₃NH₃PbBr₃ QDs thin films with high photoluminescence quantum yields (PLQY, 80%–90%) from dilute CH₃NH₃PbBr₃ QDs suspensions (≈0.1 mg mL^‐1) within 5 mins. Benefited from the high‐quality CH₃NH₃PbBr₃ QDs thin films, the corresponding QLEDs deliver a highly bright green emission with maximum luminances of 12450 cd m². Furthermore, a current efficiency of 12.7 cd A^‐1, a power efficiency of 9.7 lm W^‐1, and an external quantum efficiency (EQE) of 3.2% were acheived by enhancing the hole injection. This performance represents the best results for CH₃NH₃PbBr₃ QDs‐based QLEDs reported to date. These results indicate an important progress in the fabrication of high‐performance CH₃NH₃PbX₃ QLEDs and demonstrate their huge potential for next‐generation displays and lighting.     

Surface‐Directed Phase Separation of Conjugated Polymer Blends for Efficient Light‐Emitting Diodes

The ability to control organic‐organic interfaces in conjugated polymer blends is critical for further device improvement. Here, we control the phase separation in blends of poly(9,9‐di‐n‐octylfluorene‐alt‐benzothiadiazole) (F8BT) and poly(9,9‐di‐n‐octylfluorene‐alt‐(1,4‐phenylene‐((4‐sec‐butylphenyl)imino)‐1,4‐phenylene) (TFB) via chemical modification of the substrate by microcontact printing of octenyltrichlorosilane molecules. The lateral phase‐separated structures in the blend film closely replicate the underlying micrometer‐scale chemical pattern. We found nanometer‐scale vertical segregation of the polymers within both lateral domains, with regions closer to the substrate being substantially pure phases of either polymer. Such phase separation has important implications for the performance of light‐emitting diodes fabricated using these patterned blend films. In the absence of a continuous TFB wetting layer at the substrate interface, as typically formed in spin‐coated blend films, charge carrier injection is confined in the well‐defined TFB‐rich domains. This confinement leads to high electroluminescence efficiency, whereas the overall reduction in the roughness of the patterned blend film results in slower decay of device efficiency at high voltages. In addition, the amount of surface out‐coupling of light in the forward direction observed in these blend devices is found to be strongly correlated to the distribution of periodicity of the phase‐separated structures in the active layer.     

Barium Hydroxide as an Interlayer Between Zinc Oxide and a Luminescent Conjugated Polymer for Light‐Emitting Diodes

A study of hybrid light‐emitting diodes (HyLEDs) fabricated with and without solution‐processible Cs₂CO₃ and Ba(OH)₂ inorganic interlayers is presented. The interlayers are deposited between a zinc oxide electron‐injection layer and a fluorescent emissive polymer poly(9‐dioctyl fluorine–alt‐benzothiadiazole) (F8BT) layer, with a thermally evaporated MoO₃/Au layer used as top anode contact. In comparison to Cs₂CO₃, the Ba(OH)₂ interlayer shows improved charge carrier balance in bipolar devices and reduced exciton quenching in photoluminance studies at the ZnO/Ba(OH)₂/F8BT interface compared to the Cs₂CO₃ interlayer. A luminance efficiency of ≈28 cd A^?1 (external quantum efficiency (EQE) ≈ 9%) is achieved for ≈1.2 μm thick single F8BT layer based HyLEDs. Enhanced out‐coupling with the aid of a hemispherical lens allows further efficiency improvement by a factor of 1.7, increasing the luminance efficiency to ≈47cd A^?1, corresponding to an EQE of 15%. The photovoltaic response of these structures is also studied to gain an insight into the effects of interfacial properties on the photoinduced charge generation and back‐recombination, which reveal that Ba(OH)₂ acts as better hole blocking layer than the Cs₂CO₃ interlayer.     

Conjugated Polyelectrolyte Hybridized ZnO Nanoparticles as a Cathode Interfacial Layer for Efficient Polymer Light‐Emitting Diodes

Alkoxy side‐chain tethered polyfluorene conjugated polyelectrolyte (CPE), poly[(9,9‐bis((8‐(3‐methyl‐1‐imidazolium)octyl)‐2,7‐fluorene)‐alt‐(9,9‐bis(2‐(2‐methoxyethoxy)ethyl)‐fluorene)] dibromide (F8imFO₄), is utilized to obtain CPE‐hybridized ZnO nanoparticles (NPs) (CPE:ZnO hybrid NPs). The surface defects of ZnO NPs are passivated through coordination interactions with the oxygen atoms of alkoxy side‐chains and the bromide anions of ionic pendent groups from F8imFO₄ to the oxygen vacancies of ZnO NPs, and thereby the fluorescence quenching at the interface of yellow‐emitting poly(p‐phenylene vinylene)/CPE:ZnO hybrid NPs is significantly reduced at the CPE concentration of 4.5 wt%. Yellow‐emitting polymer light‐emitting diodes (PLEDs) with CPE(4.5 wt%):ZnO hybrid NPs as a cathode interfacial layer show the highest device efficiencies of 11.7 cd A^?1 at 5.2 V and 8.6 lm W^?1 at 3.8 V compared to the ZnO NP only (4.8 cd A^?1 at 7 V and 2.2 lm W^?1 at 6.6 V) or CPE only (7.3 cd A^?1 at 5.2 V and 4.9 lm W^?1 at 4.2 V) devices. The results suggest here that the CPE:ZnO hybrid NPs has a great potential to improve the device performance of organic electronics.     

Electron‐Rich Alcohol‐Soluble Neutral Conjugated Polymers as Highly Efficient Electron‐Injecting Materials for Polymer Light‐Emitting Diodes

We report the design and synthesis of three alcohol‐soluble neutral conjugated polymers, poly[9,9‐bis(2‐(2‐(2‐diethanolaminoethoxy) ethoxy)ethyl)fluorene] (PF‐OH), poly[9,9‐bis(2‐(2‐(2‐diethanol‐aminoethoxy)ethoxy)ethyl)fluorene‐alt‐4,4′‐phenylether] (PFPE‐OH) and poly[9,9‐bis(2‐(2‐(2‐diethanolaminoethoxy) ethoxy)ethyl)fluorene‐alt‐benzothiadizole] (PFBT‐OH) with different conjugation length and electron affinity as highly efficient electron injecting and transporting materials for polymer light‐emitting diodes (PLEDs). The unique solubility of these polymers in polar solvents renders them as good candidates for multilayer solution processed PLEDs. Both the fluorescent and phosphorescent PLEDs based on these polymers as electron injecting/transporting layer (ETL) were fabricated. It is interesting to find that electron‐deficient polymer (PFBT‐OH) shows very poor electron‐injecting ability compared to polymers with electron‐rich main chain (PF‐OH and PFPE‐OH). This phenomenon is quite different from that obtained from conventional electron‐injecting materials. Moreover, when these polymers were used in the phosphorescent PLEDs, the performance of the devices is highly dependent on the processing conditions of these polymers. The devices with ETL processed from water/methanol mixed solvent showed much better device performance than the devices processed with methanol as solvent. It was found that the erosion of the phosphorescent emission layer could be greatly suppressed by using water/methanol mixed solvent for processing the polymer ETL. The electronic properties of the ETL could also be influenced by the processing conditions. This offers a new avenue to improve the performance of phosphorescent PLEDs through manipulating the processing conditions of these conjugated polymer ETLs.     

High‐Performance Flexible Thermoelectric Devices Based on All‐Inorganic Hybrid Films for Harvesting Low‐Grade Heat

The fabrication of a flexible thermoelectric (TE) device that contains flexible, all‐inorganic hybrid thin films (p‐type single‐wall carbon nanotubes (SWCNTs)/Sb₂Te₃ and n‐type reduced graphene oxide (RGO)/Bi₂Te₃) is reported. The optimized power factors of the p‐type and n‐type hybrid thin films at ambient temperature are about 55 and 108 µW m^?1 K^?2, respectively. The high performance of these films that are fabricated through the combination of vacuum filtration and annealing can be attributed to their planar orientation and network structure. In addition, a TE device, with 10 couples of legs, shows an output power of 23.6 µW at a temperature gradient of 70 K. A prototype of an integrated photovoltaic‐TE (PV‐TE) device demonstrates the ability to harvest low‐grade “waste” thermal energy from the human body and solar irradiation. The flexible TE and PV‐TE device have great potential in wearable energy harvesting and management.     

Exciplex Emission in Light‐Emitting Electrochemical Cells and Light Outcoupling Methods for More Efficient LEC Devices

Much effort has gone into research on light‐emitting electrochemical cells (LECs) in recent years. LECs have a simple structure and can be fabricated using low‐cost methods and materials and are seen as the next big thing in organic devices after organic light‐emitting diodes (OLEDs). In particular, expectations are high, in that LECs could be used to create a new generation of low‐cost lighting systems, making use of their surface‐emitting property. Getting such systems to the market will require the development of highly efficient white light‐emitting LECs. A variety of methods for obtaining white emission based on the light‐mixing principle have been explored. Among these, the use of exciplexes formed between donor‐type and acceptor‐type molecules is one of the more promising. Exciplex emission is broad in spectrum and can be used to produce LECs with a high color rendering index. In this progress report, the recent developments in research into LECs designed to utilize exciplex emission and present technologies used to obtain white emission are discussed. The potential for using thermally activated delayed fluorescence to improve efficiency is described. Finally, the latest developments in optical engineering techniques for LECs are also discussed.     

The Root Causes of the Limited Stability of Solution‐Coated Small‐Molecule Organic Light‐Emitting Devices: Faster Host Aggregation by Exciton–Polaron Interactions

The degradation mechanism is compared in organic light‐emitting devices (OLEDs) fabricated by solution‐coating to that in vacuum‐deposited OLEDs. Devices comprising various host materials made by vacuum‐deposition or solution‐coating are investigated. Changes in devices electroluminescence (EL) spectra during prolonged electrical driving are compared and analyzed. Hole‐only devices are also utilized, and employed to study the effects of charges and excitons, separately and combined. The results reveal that the faster degradation of solution‐processed devices relative to their vacuum‐deposited counterparts under electrical stress is due to a faster aggregation of the host materials. Interactions between excitons and polarons in the emitting layers of the devices induce this aggregation phenomenon. Although this phenomenon affects both vacuum‐deposited and solution‐coated emitting layers, it is found to occur much faster in the later. The findings shed light on the root causes of the limited stability of solution‐processed OLEDs.     

Layer‐by‐Layer Conjugated Extension of a Semiconducting Polymer for High‐Performance Organic Field‐Effect Transistor

A donor–acceptor (D–A) semiconducting copolymer, PDPP‐TVT‐29, comprising a diketopyrrolopyrrole (DPP) derivative with long, linear, space‐separated alkyl side‐chains and thiophene vinylene thiophene (TVT) for organic field‐effect transistors (OFETs) can form highly π‐conjugated structures with an edge‐on molecular orientation in an as‐spun film. In particular, the layer‐like conjugated film morphologies can be developed via short‐term thermal annealing above 150 °C for 10 min. The strong intermolecular interaction, originating from the fused DPP and D–A interaction, leads to the spontaneous self‐assembly of polymer chains within close proximity (with π‐overlap distance of 3.55 Å) and forms unexpectedly long‐range π‐conjugation, which is favorable for both intra‐ and intermolecular charge transport. Unlike intergranular nanorods in the as‐spun film, well‐conjugated layers in the 200 °C‐annealed film can yield more efficient charge‐transport pathways. The granular morphology of the as‐spun PDPP‐TVT‐29 film produces a field‐effect mobility (μ _FET) of 1.39 cm² V^?1 s^?1 in an OFET based on a polymer‐treated SiO₂ dielectric, while the 27‐Å‐step layered morphology in the 200 °C‐annealed films shows high μ _FET values of up to 3.7 cm² V^?1 s^?1.     

Difluorobenzothiadiazole‐Based Small‐Molecule Organic Solar Cells with 8.7% Efficiency by Tuning of π‐Conjugated Spacers and Solvent Vapor Annealing

The synthesis of a series of tetrafluorine‐substituted, wide‐bandgap, small molecules consisting of various π‐conjugated spacers (furan, thiophene, selenophene) between indacenodithiophene as the electron‐donating core and the electron‐deficient difluorobenzothiadiazole unit is reported and the effect of the π‐conjugated spacers on the photovoltaic properties is investigated. The alteration of the π‐conjugated spacer enables fine‐tuning of the photophysical properties and energy levels of the small molecules, and allows the adjustment of the charge‐transport properties, the morphology of the photoactive films, as well as their photovoltaic properties. Moreover, most of these devices exhibit superior device performances after CH₂Cl₂ solvent annealing than without annealing, with a high fill factor (0.70–0.75 for all cases). Notably, the devices based on the new molecule BIT4FTh (with thiophene as the spacer) show an outstanding PCE of 8.7% (with an impressive FF of 0.75), considering its wide‐bandgap (1.81 eV), which is among the highest efficiencies reported so far for small‐molecules‐based solar cells. The morphologies of the photoactive layers with/without CH₂Cl₂ solvent annealing are characterized by atomic force microscopy, transmission electron microscopy and two‐dimensional grazing incidence X‐ray diffraction analysis. The results reported here clearly indicate that highly efficient small‐molecules‐based solar cells can be achieved through rational design of their molecular structure and optimization of the phase‐separated morphology via an adapted solvent–vapor annealing process.     

White‐Emitting Conjugated Polymer/Inorganic Hybrid Spheres: Phenylethynyl and 2,6‐Bis(pyrazolyl)pyridine Copolymer Coordinated to Eu(tta)3

The synthesis of two cyan color (blue and green emission) displaying high molecular weight 2,6‐bis(pyrazolyl)pyridine‐co‐octylated phenylethynyl conjugated polymers (CPs) is presented. The conjugated polymers are solution‐processed to prepare spin coated thin films and self‐assembled nano/microscale spheres, exhibiting cyan color under UV. Additionally, the metal coordinating ability of the 2,6‐bis(pyrazolyl)pyridine available on the surface of the CP films and spheres is exploited to prepare red emitting Eu(III) metal ion containing conjugated polymer (MCCP) layer. The fabricated hybrid (CP/MCCP) films and spheres exhibit bright white‐light under UV exposure. The Commission Internationale de l'Eclairage (CIE) coordinates are found to be (x = 0.33, y = 0.37) for hybrid films and (x = 0.30, y = 0.35) for hybrid spheres. These values are almost close to the designated CIE coordinates for ideal white‐light color (x = 0.33, y = 0.33). This easy and efficient fabrication technique to generate white‐color displaying films and nano/microspheres signify an important method in bottom‐up nanotechnology of conjugated polymer based hybrid solid state assemblies.     

A Novel Fluorene‐Triphenylamine Hybrid That is a Highly Efficient Host Material for Blue‐, Green‐, and Red‐Light‐Emitting Electrophosphorescent Devices

TFTPA (tris[4‐(9‐phenylfluoren‐9‐yl)phenyl]amine), a novel host material that contains a triphenylamine core and three 9‐phenyl‐9‐fluorenyl peripheries, was effectively synthesized through a Friedel‐Crafts‐type substitution reaction. Owing to the presence of its sterically bulky 9‐phenyl‐9‐fluorenyl groups, TFTPA exhibits a high glass transition temperature (186 °C) and is morphologically and electrochemically stable. In addition, as demonstrated from atomic force microscopy measurements, the aggregation of the triplet iridium dopant is significantly diminished in the TFTPA host, resulting in a highly efficient full‐color phosphorescence. The performance of TFTPA ‐based devices is far superior to those of the corresponding mCP‐ or CBP‐based devices, particularly in blue‐ and red‐emitting electrophosphorescent device systems. The efficiency of the FIrpic‐based blue‐emitting device reached 12 % (26 cd A^–1) and 18 lm W^–1 at a practical brightness of 100 cd m^–2; the Ir(piq)₂acac‐based red‐emitting device exhibited an extremely low turn‐on voltage (2.6 V) and a threefold enhancement in device efficiency (9.0 lm W^–1) relative to those of reference devices based on the CBP host material.     

Biocompatible D–A Semiconducting Polymer Nanoparticle with Light‐Harvesting Unit for Highly Effective Photoacoustic Imaging Guided Photothermal Therapy

The development of nanotheranostic agents that integrate diagnosis and therapy for effective personalized precision medicine has obtained tremendous attention in the past few decades. In this report, biocompatible electron donor–acceptor conjugated semiconducting polymer nanoparticles (PPor‐PEG NPs) with light‐harvesting unit is prepared and developed for highly effective photoacoustic imaging guided photothermal therapy. To the best of our knowledge, it is the first time that the concept of light‐harvesting unit is exploited for enhancing the photoacoustic signal and photothermal energy conversion in polymer‐based theranostic agent. Combined with additional merits including donor–acceptor pair to favor electron transfer and fluorescence quenching effect after NP formation, the photothermal conversion efficiency of the PPor‐PEG NPs is determined to be 62.3%, which is the highest value among reported polymer NPs. Moreover, the as‐prepared PPor‐PEG NP not only exhibits a remarkable cell‐killing ability but also achieves 100% tumor elimination, demonstrating its excellent photothermal therapeutic efficacy. Finally, the as‐prepared water‐dispersible PPor‐PEG NPs show good biocompatibility and biosafety, making them a promising candidate for future clinical applications in cancer theranostics.     

Catalyst‐Free,Fast, and Tunable Synthesis for Robust Covalent Polymer Network Semiconducting Thin Films

Covalent polymer networks (CPNs) are of great technological interest due to their robustness and tunability; however, they are rarely applied as semiconductors in optoelectronic devices due to poor material processability. Herein, a simple, rapid, and powerful approach is reported to prepare CPN thin films based on an in situ thermal azide–alkyne cycloaddition (TAAC) in the absence of catalyst or solvent. The method is demonstrated with perylenediimide and triazine‐based monomers, and affords smooth and homogenous CPN films through solution processing and heat treatment (10 min). Moreover, the site‐specific TAAC realizes semiconducting CPNs without undesired impurities or byproducts, and tunable optoelectronic properties are achieved by varying the reaction temperature, which affects the intermolecular self‐assembly. The obtained CPN films exhibit exceptional solvent resistance and good n‐type semiconducting behavior, which together afford application in a series of multilayer solution‐processed organic photovoltaics, where the presence of CPN films significantly improves the solar energy conversion efficiency to over 8% (7% in control devices) when the CPN is used in a planar‐mixed heterojunction device architecture.