Manipulation of Charge and Exciton Distribution Based on Blue Aggregation‐Induced Emission Fluorophors: A Novel Concept to Achieve High‐Performance Hybrid White Organic Light‐Emitting Diodes

The aggregation‐induced emission (AIE) phenomenon is important in organic light‐emitting diodes (OLEDs), for it can potentially solve the aggregation‐caused quenching problem. However, the performance of AIE fluorophor‐based OLEDs (AIE OLEDs) is unsatisfactory, particularly for deep‐blue devices (CIEy < 0.15). Here, by enhancing the device engineering, a deep‐blue AIE OLED exhibits low voltage (i.e., 2.75 V at 1 cd m^?2), high luminance (17 721 cd m^?2), high efficiency (4.3 lm W^?1), and low efficiency roll‐off (3.6 lm W^?1 at 1000 cd m^?2), which is the best deep‐blue AIE OLED. Then, blue AIE fluorophors, for the first time, have been demonstrated to achieve high‐performance hybrid white OLEDs (WOLEDs). The two‐color WOLEDs exhibit i) stable colors and the highest efficiency among pure‐white hybrid WOLEDs (32.0 lm W^?1); ii) stable colors, high efficiency, and very low efficiency roll‐off; or iii) unprecedented efficiencies at high luminances (i.e., 70.2 cd A^?1, 43.4 lm W^?1 at 10 000 cd m^?2). Moreover, a three‐color WOLED exhibits wide correlated color temperatures (10 690–2328 K), which is the first hybrid WOLED showing sunlight‐style emission. These findings will open a novel concept that blue AIE fluorophors are promising candidates to develop high‐performance hybrid WOLEDs, which have a bright prospect for the future displays and lightings.     

Novel Blue Bipolar Thermally Activated Delayed Fluorescence Material as Host Emitter for High‐Efficiency Hybrid Warm‐White OLEDs with Stable High Color‐Rendering Index

A novel thermally activated delayed fluorescence (TADF) molecule, PHCz2BP, is synthesized and used to construct high performance organic light‐emitting diodes (OLEDs) in this work. PHCz2BP is not only the neat emitting layer for efficient sky‐blue OLED, with very high peak external quantum efficiency/power efficiency (EQE/PE) values of 4.0%/6.9 lm W^?1, but also acts as a host to sensitize high‐luminance and high‐efficiency green, orange, and red electrophosphorescence with the universal high EQEs of >20%. More importantly, two hybrid white OLEDs based on the double‐layer emitting system of PHCz2BP:green phosphor/PHCz2BP:red phosphor are achieved. To the best of the knowledge, this is the first report for three‐color (blue–green–red) white devices that adopt a TADF blue host emitter and two phosphorescent dopants without any other additional host. Such simple emitting systems thus realized the best electroluminescent performance to date for the WOLEDs utilizing the hybrid TADF/phosphor strategy: forward‐viewing EQEs of 25.1/23.6% and PEs of 24.1/22.5 lm W^?1 at the luminance of 1000 cd m^?2 with the color rendering indexes of 85/87 and warm‐white Commission Internationale de L'Eclairage coordinates of (0.41, 0.46)/(0.42, 0.45), indicating its potential to be used as practical eye‐friendly solid‐state lighting in future.     

High‐Performance Hybrid White Organic Light‐Emitting Diodes with Superior Efficiency/Color Rendering Index/Color Stability and Low Efficiency Roll‐Off Based on a Blue Thermally Activated Delayed Fluorescent Emitter

Thermally activated delayed fluorescence (TADF)‐based white organic light‐emitting diodes (WOLEDs) are highly attractive because the TADF emitters provide a promising alternative route to harvest triplet excitons. One of the major challenges is to achieve superior efficiency/color rendering index/color stability and low efficiency roll‐off simultaneously. In this paper, high‐performance hybrid WOLEDs are demonstrated by employing an efficient blue TADF emitter combined with red and green phosphorescent emitters. The resulting WOLED shows the maximum external quantum efficiency, current efficiency, and power efficiency of 23.0%, 51.0 cd A^?1, and 51.7 lm W^?1, respectively. Moreover, the device exhibits extremely stable electroluminescence spectra with a high color rendering index of 89 and Commission Internationale de L'Eclairage coordinates of (0.438, 0.438) at the practical brightness of 1000 cd m^?2. The achievement of these excellent performances is systematically investigated by versatile experimental and theoretical evidences, from which it is concluded that the utilization of a blue‐green‐red cascade energy transfer structure and the precise manipulation of charges and excitons are the key points. It can be anticipated that this work might be a starting point for further research towards high‐performance hybrid WOLEDs.     

White Organic Light‐Emitting Diodes with Evenly Separated Red,Green, and Blue Colors for Efficiency/Color‐Rendition Trade‐Off Optimization

A novel yellowish‐green triplet emitter, bis(5‐(trifluoromethyl)‐2‐p‐tolylpyridine) (acetylacetonate)iridium(III) (1), was conveniently synthesized and used in the fabrication of both monochromatic and white organic light‐emitting diodes (WOLEDs). At the optimal doping concentration, monochromatic devices based on 1 exhibit a high efficiency of 63 cd A^?1 (16.3% and 36.6 lm W^?1) at a luminance of 100 cd m^?2. By combining 1 with a phosphorescent sky‐blue emitter, bis(3,5‐difluoro‐2‐(2‐pyridyl)phenyl)‐(2‐carboxypyridyl)iridium(III) (FIrPic), and a red emitter, bis(2‐benzo[b]thiophen‐2‐yl‐pyridine)(acetylacetonate)iridium(III) (Ir(btp)₂(acac)), the resulting electrophosphorescent WOLEDs show three evenly separated main peaks and give a high efficiency of 34.2 cd A^?1 (13.2% and 18.5 lm W^?1) at a luminance of 100 cd m^?2. When 1 is mixed with a deep‐blue fluorescent emitter, 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl (BCzVBi), and Ir(btp)₂(acac), the resulting hybrid WOLEDs demonstrate a high color‐rendering index of 91.2 and CIE coordinates of (0.32, 0.34). The efficient and highly color‐pure WOLEDs based on 1 with evenly separated red, green, blue peaks and a high color‐rendering index outperform those of the state‐of‐the‐art emitter, fac‐tris(2‐phenylpyridine)iridium(III) (Ir(ppy)₃), and are ideal candidates for display and lighting applications.     

High‐Quality White Organic Light‐Emitting Diodes Composed of Binary Emitters with Color Rendering Index Exceeding 80 by Utilizing Color Remedy Strategy

Implementing rigorous standards for high‐quality white organic light‐emitting diodes (WOLEDs) demands further investigation. Herein, a novel and feasible color remedy strategy (CRS) is proposed in WOLEDs composed of binary‐emitters, to arouse the green‐emission, thereby complementing the spectral deficiency in white‐emission. Thus, the color rendering indexes (CRIs) of binary‐emissive WOLEDs can be boosted from 63 to 80 threshold, and the Commission International de I'Eclairage‐(x, y) coordinates are precisely located inside the American National Standard Institute quadrangles, which can rival the WOLEDs integrating ternary or more emitters. Moreover, it is more feasible for CRS‐based binary‐emissive system to tune white‐emission from cool white‐emission (correlated color temperature (CCT) ≈ 5000 K) to eye‐friendly warm white‐emission (CCT ≈ 2000 K). Meanwhile, benefiting from the reduced energy loss and low driving voltage of CRS zone, all of the CRS‐based WOLEDs with diverse CCTs can exceed 20% external quantum efficiency, and the highest approach 25%, as well as the highest power efficiency beyond 60 lm W^?1, which is comparable with those reported employing light‐extracting techniques. In addition, it is evident that CRS‐based WOLEDs also exhibit outstanding color stability within the variation of luminance in several orders of magnitude (50–12 000 cd m^?2). Thus, this novel CRS provides an innovative pathway to fabricate high‐quality WOLEDs composed of binary emitters.     

Highly Efficient Warm White Organic Light‐Emitting Diodes by Triplet Exciton Conversion

White organic light‐emitting diodes (WOLEDs) are currently under intensive research and development worldwide as a new generation light source to replace problematic incandescent bulbs and fluorescent tubes. One of the major challenges facing WOLEDs has been to achieve high energy efficiency and high color rendering index simultaneously to make the technology competitive against other alternative technologies such as inorganic LEDs. Here, an all‐phosphor, four‐color WOLEDs is presented, employing a novel device design principle utilizing molecular energy transfer or, specifically, triplet exciton conversion within common organic layers in a cascaded emissive zone configuration to achieve exceptional performance: an 24.5% external quantum efficiency (EQE) at 1000 cd/m² with a color rendering index (CRI) of 81, and an EQE at 5000 cd/m² of 20.4% with a CRI of 85, using standard phosphors. The EQEs achieved are the highest reported to date among WOLEDs of single or multiple emitters possessing such high CRI, which represents a significant step towards the realization of WOLEDs in solid‐state lighting.     

Toward Highly Efficient Solid‐State White Light‐Emitting Electrochemical Cells: Blue‐Green to Red Emitting Cationic Iridium Complexes with Imidazole‐Type Ancillary Ligands

Using imidazole‐type ancillary ligands, a new class of cationic iridium complexes ( 1 – 6 ) is prepared, and photophysical and electrochemical studies and theoretical calculations are performed. Compared with the widely used bpy (2,2′‐bipyridine)‐type ancillary ligands, imidazole‐type ancillary ligands can be prepared and modified with ease, and are capable of blueshifting the emission spectra of cationic iridium complexes. By tuning the conjugation length of the ancillary ligands, blue‐green to red emitting cationic iridium complexes are obtained. Single‐layer light‐emitting electrochemical cells (LECs) based on cationic iridium complexes show blue‐green to red electroluminescence. High efficiencies of 8.4, 18.6, and 13.2 cd A^?1 are achieved for the blue‐green‐emitting, yellow‐emitting, and orange‐emitting devices, respectively. By doping the red‐emitting complex into the blue‐green LEC, white LECs are realized, which give warm‐white light with Commission Internationale de L'Eclairage (CIE) coordinates of (0.42, 0.44) and color‐rendering indexes (CRI) of up to 81. The peak external quantum efficiency, current efficiency, and power efficiency of the white LECs reach 5.2%, 11.2 cd A^?1, and 10 lm W^?1, respectively, which are the highest for white LECs reported so far, and indicate the great potential for the use of these cationic iridium complexes in white LECs.     

Fluorene‐Based Asymmetric Bipolar Universal Hosts for White Organic Light Emitting Devices

Two new bipolar host molecules composed of hole‐transporting carbazole and electron‐transporting cyano ( CzFCN ) or oxadiazole ( CzFOxa )‐substituted fluorenes are synthesized and characterized. The non‐conjugated connections, via an sp³‐hybridized carbon, effectively block the electronic interactions between electron‐donating and ‐accepting moieties, giving CzFCN and CzFOxa bipolar charge transport features with balanced mobilities (10^?5 to 10^?6 cm² V^?1 s^?1). The meta–meta configuration of the fluorene‐based acceptors allows the bipolar hosts to retain relatively high triplet energies [E_T = 2.70 eV ( CzFOxa ) and 2. 86 eV ( CzFCN )], which are sufficiently high for hosting blue phosphor. Using a common device structure – ITO/PEDOT:PSS/DTAF/TCTA/host:10% dopants (from blue to red)/DPPS/LiF/Al – highly efficient electrophosphorescent devices are successfully achieved. CzFCN ‐based devices demonstrate better performance characteristics, with maximum η_ext of 15.1%, 17.9%, 17.4%, 18%, and 20% for blue (FIrpic), green [(PPy)₂Ir(acac)], yellowish‐green [m‐(Tpm)₂Ir(acac)], yellow [(Bt)₂Ir(acac)], and red [Os(bpftz)₂(PPhMe₂)₂, OS1], respectively. In addition, combining yellowish‐green m‐(Tpm)₂Ir(acac) with a blue emitter (FIrpic) and a red emitter (OS1) within a single emitting layer hosted by bipolar CzFCN , three‐color electrophosphorescent WOLEDs with high efficiencies (17.3%, 33.4 cd A^?1, 30 lm W ^?1), high color stability, and high color‐rendering index (CRI) of 89.7 can also be realized.     

Highly Efficient Greenish‐Yellow Phosphorescent Organic Light‐Emitting Diodes Based on Interzone Exciton Transfer

Phosphorescent organic light emitting diodes (PHOLEDs) have undergone tremendous growth over the past two decades. Indeed, they are already prevalent in the form of mobile displays, and are expected to be used in large‐area flat panels recently. To become a viable technology for next generation solid‐state light source however, PHOLEDs face the challenge of achieving concurrently a high color rendering index (CRI) and a high efficiency at high luminance. To improve the CRI of a standard three color white PHOLED, one can use a greenish‐yellow emitter to replace the green emitter such that the gap in emission wavelength between standard green and red emitters is eliminated. However, there are relatively few studies on greenish‐yellow emitters for PHOLEDs, and as a result, the performance of greenish‐yellow PHOLEDs is significantly inferior to those emitting in the three primary colors, which are driven strongly by the display industry. Herein, a newly synthesized greenish‐yellow emitter is synthesized and a novel device concept is introduced featuring interzone exciton transfer to considerably enhance the device efficiency. In particular, high external quantum efficiencies (current efficiencies) of 21.5% (77.4 cd/A) and 20.2% (72.8 cd/A) at a luminance of 1000 cd/m² and 5000 cd/m², respectively, have been achieved. These efficiencies are the highest reported to date for greenish‐yellow emitting PHOLEDs. A model for this unique design is also proposed. This design could potentially be applied to enhance the efficiency of even longer wavelength yellow and red emitters, thereby paving the way for a new avenue of tandem white PHOLEDs for solid‐state lighting.     

Modulation of Förster and Dexter Interactions in Single‐Emissive‐Layer All‐Fluorescent WOLEDs for Improved Efficiency and Extended Lifetime

White organic light‐emitting diodes (WOLEDs) with thermally activated delayed fluorophor sensitized fluorescence (TSF) have aroused wide attention, considering their potential for full exciton utilization without noble‐metal containing phosphors. However, performances of TSF‐WOLEDs with a single‐emissive‐layer (SEL) still suffer from low exciton utilization and insufficient blue emission for proper white balance. Here, by modulating Förster and Dexter interactions in SEL‐TSF‐WOLEDs, high efficiencies, balanced white spectra, and extended lifetimes are realized simultaneously. Given the different dependencies of Förster and Dexter interactions on intermolecular distances, sterically shielded blue thermally activated delayed fluorescence (TADF) emitters and orange conventional fluorescent dopants (CFDs) with electronically inert peripheral units are adopted to enlarge distances of electronically active chromophores, not only blocking the Dexter interaction to prevent exciton loss but also finely suppressing the Förster one to guarantee balanced white emission with sufficient blue components. It thus provides the possibility to maximize device performances in a large range of CFD concentrations. A record high maximum external quantum efficiency/power efficiency of 19.6%/52.2 lm W^?1, Commission Internationale de L'Eclairage coordinate of (0.33, 0.45), and prolonged half‐lifetime of over 2300 h at an initial luminance of 1000 cd m^?2 are realized simultaneously for SEL‐TSF‐WOLEDs, paving the way toward practical applications.     

Controlling the Recombination Zone of White Organic Light‐Emitting Diodes with Extremely Long Lifetimes

The lifetime of the organic devices remains a major challenge that must be overcome before the wide application of white organic light‐emitting diodes (WOLEDs) technology. In this work, we present a new strategy to achieve WOLEDs with an extremely long lifetime by wisely control of the recombination zone. A blue emitting layer of 6,6′‐(1,2‐ethenediyl)bis(N‐2‐naphthalenyl‐N‐phenyl‐2‐naphthalenamine doped 9‐(1‐naphthyl)‐10‐(2‐naphthyl)‐anthracene was deposited on top of the mixed host blue emitting layer to prevent hole penetration into the electron transporting layer and to attain better confinement of carrier recombination. In this way, we obtained a WOLED with a record high lifetime of over 150 000 hours at an initial brightness of 1000 cd m^?2, 40 times longer than the conventional bilayer WOLED. The electroluminescent spectra of the long‐lived WOLED showed almost no color‐shifting after accelerated aging. It is anticipated that these results might be a starting point for further research towards ultrastable OLED displays and lightings.     

Highly Efficient Three Primary Color Organic Single‐Crystal Light‐Emitting Devices with Balanced Carrier Injection and Transport

Organic single crystals have a great potential in the field of organic optoelectronics because of their advantages of high carrier mobility and high thermal stability. However, the application of the organic single crystals in light‐emitting devices (OLEDs) has been limited by single‐layered structure with unbalanced carrier injection and transport. Here, fabrication of a multilayered‐structure crystal‐based OLED constitutes a major step toward balanced carrier injection and transport by introducing an anodic buffer layer and electron transport layer into the device structure. Three primary color single‐crystal‐based OLEDs based on the multilayered structure and molecular doping exhibit a maximum luminance and current efficiency of 820 cd cm^?2 and 0.9 cd A^?1, respectively, which are the highest performance to date for organic single‐crystal‐based OLEDs. This work paves the way toward high‐performance organic optoelectronic devices based on the organic single crystals.     

High efficiency phosphorescent white organic light-emitting diodes with an ultra-thin red and green co-doped layer and dual blue emitting layers

Phosphorescent white organic light emitting diodes (WOLEDs) with a multi-layer emissive structure comprising two separate blue layers and an ultra-thin red and green co-doped layer sandwiched in between have been studied. With proper host and dopant compositions and optimized layer thicknesses, high-performance WOLEDs having a power efficiency over 40 lm/W at 1000 cd/m² with a low efficiency roll-off have been produced. Through a systematic investigation of the exciton confinement and various pathways for energy transfer among the hosts and dopants, we have found that both the ultra-thin co-doped layer and two blue emitting layers play a vital role in achieving high device efficiency and controllable white emission.     

Color stable multilayer all-phosphor white organic light-emitting diodes with excellent color quality

The color stability of all-phosphor white organic light-emitting diodes (WOLEDs) is crucial and remains a challenge that must be overcome before the wide application of phosphor WOLEDs technology. Besides, color stable all-phosphor WOLEDs should also offer high color rendering index (CRI) and ideal correlated color temperature (CCT) simultaneously to make the technology competitive against other alternative technologies such as inorganic LEDs. In this work, we demonstrate a series of color stable all-phosphor WOLEDs with two emitters (blue and yellow), three emitters (blue, green/red, and yellow) and four emitters (blue, green, yellow and red) by introducing tris (phenylpyrazole) Iridium [Ir(ppz)₃] as interlayer. The results show that appropriate thickness of Ir(ppz)₃ interlayer not only can control exciton distribution in the emission zone, but also can improve the spectra stability. In particular, one efficient four-color device with double-interlayer yields fairly high CRI of 92 and 90, ideal CCT of 3703 K and 3962 K at illumination-relevant luminance of 100 cd m^–2 and 1000 cd m^–2, respectively, which is very appropriate to indoor lighting application. By further employing appropriate hosts to regulate the carrier injection, ultrahigh stable four-color devices with applicable CRI are finally achieved.     

Origin of the Exclusive Ternary Electroluminescent Behavior of BN‐Doped Nanographenes in Efficient Single‐Component White Light‐Emitting Electrochemical Cells

White‐light‐emitting electrochemical cells (WLECs) still represent a significant milestone, since only a few examples with moderate performances have been reported. Particularly, multiemissive white emitters are highly desired, as a paradigm to circumvent phase separation and voltage‐dependent emission color issues that are encountered following host:guest and multilayered approaches. Herein, the origin of the exclusive white ternary electroluminescent behavior of BN‐doped nanographenes with a B₃N₃ doping pattern (hexa‐perihexabenzoborazinocoronene) is rationalized, leading to one of the most efficient (≈3 cd A^?1) and stable‐over‐days single‐component and single‐layered WLECs. To date, BN‐doped nanographenes have featured blue thermally activated delayed fluorescence (TADF). This doping pattern provides, however, white electroluminescence spanning the whole visible range (x/y CIE coordinates of 0.29–31/0.31–38 and average color rendering index (CRI) of 87) through a ternary emission involving fluorescence and thermally activated dual phosphorescence. This temperature‐dependent multiemissive mechanism is operative for both photo‐ and electroluminescence processes and holds over the device lifespan, regardless of the device architecture, active layer composition, and operating conditions. As such, this work represents a new stepping‐stone toward designing a new family of multiemissive white emitters based on BN‐doped nanographenes that realizes one of the best‐performing single‐component white‐emitting devices compared to the prior‐art.     

All‐Fluorescence White Organic Light‐Emitting Diodes Exceeding 20% EQEs by Rational Manipulation of Singlet and Triplet Excitons

White organic light‐emitting diodes (WOLEDs) composed of conventional fluorophores possess color purity, low efficiency roll‐off, and rare metal absence, but suffer from theoretical limits due to the lack of triplet utilization. Due to the different diffusion distance for singlets and triplets, multiple Förster resonance energy transfer (FRET) channels can be adequately built up. Herein, besides the complementary component, a blue fluorescence layer, hosted by pure hydrocarbon material SF4‐TPE, is put forward as the spatial exciton manipulating layer to rationally allocate singlets and triplets to the corresponding channels. Hence, singlets are captured by the blue fluorophore, diffused triplets subsequently undergo energy resonance between the blue fluorophore and green assistant, and up‐conversion effect for eventual emission from the yellow fluorophore. Owing to the utilization of singlets and triplets, all‐fluorescence WOLEDs exhibit high efficiency exceeding 20%, with slight efficiency roll‐off even under high luminance of 5000 cd cm^?2. Moreover, CIE coordinates can be surrounding and precisely inside the American National Standard Institute (ANSI) quadrangles, as well as outstanding color stability (ΔCIE‐(x, y) within (0.001, 0.012)) from 300 to 13000 cd cm^?2.     

Efficient white OLEDs employing red,green, and blue tetradentate platinum phosphorescent emitters

The development of white organic light-emitting diodes (WOLEDs) employing three tetradentate platinum-based emitters, PtN3N-ptb (red), PtON1 (blue), and PtOO8 (green), is described. Spectral and electrical results show that localization of charge buildup, energy transfers between dopants, and concentration-dependence of spectral shape are all major factors in determining the overall color quality of a device. WOLEDs are fabricated by optimizing the thickness of emissive layers, the concentration of dopants, and the stacking order of emissive layers. Ultimately, the device employing 6% PtN3N-ptb(red)/6% PtON1(blue)/6% PtOO8(green) stacking order of emissive layers demonstrates the Commission Internationale de L’Éclairage coordinates (CIE) coordinates of (0.35, 0.35) and Color Rendering Index (CRI) value of 80, peak Power Efficiency (PE) of 41 lm/W, and maximum External Quantum Efficiency (EQE) of 21.0%.     

Highly Efficient and Fully Solution‐Processed White Electroluminescence Based on Fluorescent Small Molecules and a Polar Conjugated Polymer as the Electron‐Injection Material

Highly efficient and fully solution‐processed white organic light‐emitting diodes (WOLEDs) based on fluorescent small molecules and a polar conjugated polymer as electron‐injection material are reported. The emitting layer in the WOLEDs is a blend of new blue‐, green‐, and red‐fluorescent small molecules, with a blending ratio of 100:0.4:0.8 (B/G/R) by weight, and a methanol/water soluble conjugated polymerpoly[(9,9‐bis(30‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐2,7‐(9,9‐dioctylfluorene)] (PFN) acts as the electron‐injection layer (EIL). All the organic layers are spin‐coated from solution. The device exhibits pure white emission with a maximum luminous efficiency of 9.2 cd A^?1 and Commission Internationale d'Eclairage Coordinates of (0.35, 0.36). PFN acting as the EIL material plays a key role in the improvement of the device performance when used in solution‐processed small‐molecule WOLEDs.     

Red,Green, and Blue Light‐Emitting Polyfluorenes Containing a Dibenzothiophene‐S,S‐Dioxide Unit and Efficient High‐Color‐Rendering‐Index White‐Light‐Emitting Diodes Made Therefrom

A series of blue (B), green (G) and red (R) light‐emitting, 9,9‐bis(4‐(2‐ethyl‐hexyloxy)phenyl)fluorene (PPF) based polymers containing a dibenzothiophene‐S,S‐dioxide (SO) unit (PPF‐SO polymer), with an additional benzothiadiazole (BT) unit (PPF‐SO‐BT polymer) or a 4,7‐di(4‐hexylthien‐2‐yl)‐benzothiadiazole (DHTBT) unit (PPF‐SO‐DHTBT polymer) are synthesized. These polymers exhibit high fluorescence yields and good thermal stability. Light‐emitting diodes (LEDs) using PPF‐SO25, PPF‐SO15‐BT1, and PPF‐SO15‐DHTBT1 as emission polymers have maximum efficiencies LE_max = 7.0, 17.6 and 6.1 cd A^?1 with CIE coordinates (0.15, 0.17), (0.37, 0.56) and (0.62, 0.36), respectively. 1D distributed feedback lasers using PPF‐SO30 as the gain medium are demonstrated, with a wavelength tuning range 467 to 487 nm and low pump energy thresholds (≥18 nJ). Blending different ratios of B (PPF‐SO), G (PPF‐SO‐BT) and R (PPF‐SO‐DHTBT) polymers allows highly efficient white polymer light‐emitting diodes (WPLEDs) to be realized. The optimized devices have an attractive color temperature close to 4700 K and an excellent color rendering index (CRI) ≥90. They are relatively stable, with the emission color remaining almost unchanged when the current densities increase from 20 to 260 mA cm^?2. The use of these polymers enables WPLEDs with a superior trade‐off between device efficiency, CRI, and color stability.     

m‐Indolocarbazole Derivative as a Universal Host Material for RGB and White Phosphorescent OLEDs

The host materials designed for highly efficient white phosphorescent organic light‐emitting diodes (PhOLEDs) with power efficiency (PE) >50 lm W^‐1 and low efficiency roll‐off are very rare. In this work, three new indolocarbazole‐based materials (ICDP, 4ICPPy, and 4ICDPy) are presented composed of 6,7‐dimethylindolo[3,2‐a]carbazole and phenyl or 4‐pyridyl group for hosting blue, green, and red phosphors. Among this three host materials, 4ICDPy‐based devices reveal the best electroluminescent performance with maximum external quantum efficiencies (EQEs) of 22.1%, 27.0%, and 25.3% for blue (FIrpic), green (fac‐Ir(ppy)₃), and red ((piq)₂Ir(acac)) PhOLEDs. A two‐color and single‐emitting‐layer white organic light‐emitting diode hosted by 4ICDPy with FIrpic and Ir(pq)₃ as dopants achieves high EQE of 20.3% and PE of 50.9 lm W^?1 with good color stability; this performance is among the best for a single‐emitting‐layer white PhOLEDs. All 4ICDPy‐based devices show low efficiency roll‐off probably due to the excellent balanced carrier transport arisen from the bipolar character of 4ICDPy.