Size‐Induced Switching of Nanowire Growth Direction: a New Approach Toward Kinked Nanostructures

Exploring self‐assembled nanostructures with controllable architectures has been a central theme in nanoscience and nanotechnology because of the tantalizing perspective of directly integrating such bottom‐up nanostructures into functional devices. Here, the growth of kinked single‐crystal In₂O₃ nanostructures consisting of a nanocone base and a nanowire tip with an epitaxial and defect‐free transition is demonstrated for the first time. By tailoring the growth conditions, a reliable switching of the growth direction from [111] to [110] or [112] is observed when the Au catalyst nanoparticles at the apexes of the nanocones shrink below ≈100 nm. The natural formation of kinked nanoarchitectures at constant growth pressures is related to the size‐dependent free energy that changes for different orientations of the nanowires. The results suggest that the mechanism of forming such kinked nanocone–nanowire nanostructures in well‐controlled growth environment may be universal for a wide range of functional materials.     

From Molecular‐Level Organization to Nanoscale Positioning: Synergetic Ligand Effect on the Synthesis of Hybrid Nanostructures

A key challenge in advancing the design of hybrid nanostructures (HNs) lies in the difficulty in mastering the principle of selected hybrid formation, which is complicated not only by the size and shape variations of nanoparticles but also by the interfacial phenomena associated with surface ligands. Here this study elaborates the formation mechanism of HNs by a combined experimental and theoretical study employing multiscale simulations and shows how molecular information encoded on particle surface can be transferred into distinct composite patterns. The emergence of different HNs is found to be not only related to ligand binding strengths affecting the reaction kinetics but also the ligand–ligand interactions responsible for phase segregation. Unexpectedly, the sulfidation of Ag nanoparticles co‐stabilized by citrate/gallic acid with different molar ratios constantly produces heterodimers with faster reaction rate than the formation of core–shell structures when they are solely coated by citrate or gallic acid. The surprising result originates from the phase separation of two short surface ligands with large contrast in binding strengths as indicated by photoluminescence spectra and supported by the dissipative particle dynamics simulations. Hierarchical HNs consisting of a heterodimer shell with built‐in hot spots can be further synthesized using Au@Ag core–shell particles with mixed surface layers.     

Novel Platinum–Cobalt Alloy Nanoparticles Dispersed on Nitrogen‐Doped Graphene as a Cathode Electrocatalyst for PEMFC Applications

A novel synthesis procedure is devised to obtain nitrogen‐doping in hydrogen‐exfoliated graphene (HEG) sheets. An anionic polyelectrolyte–conducting polymer duo is used to form a uniform coating of the polymer over graphene sheets. Pyrolysis of graphene coated with polypyrrole, a nitrogen‐containing polymer, in an inert environment leads to the incorporation of nitrogen atoms in the graphene network with simultaneous removal of the polymer. These nitrogen‐doped graphene (N‐HEG) sheets are used as catalyst support for dispersing platinum and platinum–cobalt alloy nanoparticles synthesized by the modified‐polyol reduction method, yielding a uniform dispersion of the catalyst nanoparticles. Compared to commercial Pt/C electrocatalyst, Pt–Co/N‐HEG cathode electrocatalyst exhibits four times higher power density in proton exchange membrane fuel cells, which is attributed to the excellent dispersion of Pt–Co alloy nanoparticles on the N‐HEG support, the alloying effect of Pt–Co, and the high electrocatalytic activity of the N‐HEG support. A stability study shows that Pt/N‐HEG and Pt–Co/N‐HEG cathode electrocatalysts are highly stable in acidic media. The study shows two promising electrocatalysts for proton exchange membrane fuel cells, which on the basis of performance and stability present the possibility of replacing contemporary electrocatalysts.     

Bifunctional MOF‐Derived Carbon Photonic Crystal Architectures for Advanced Zn–Air and Li–S Batteries: Highly Exposed Graphitic Nitrogen Matters

Nitrogen‐rich porous carbons (NPCs) are the leading cathode materials for next‐generation Zn–air and Li–S batteries. However, most existing NPC suffers from insufficient exposure and harnessing of nitrogen‐dopants (NDs), constraining the electrochemical performance. Herein, by combining silica templating with in situ texturing of metal–organic frameworks, a new bifunctional 3D nitrogen‐rich carbon photonic crystal architecture of simultaneously record‐high total pore volume (13.42 cm³ g^?1), ultralarge surface area (2546 m² g^?1), and permeable hierarchical macro‐meso‐microporosity is designed, enabling sufficient exposure and accessibility of NDs. Thus, when used as cathode catalysts, the Zn–air battery delivers a fantastic capacity of 770 mAh g_Zn^?1 at an unprecedentedly high rate of 120 mA cm^?2, with an ultrahigh power density of 197 mW cm^?2. When hosting 78 wt% sulfur, the Li–S battery affords a high‐rate capacity of 967 mAh g^?1 at 2 C, with superb stability over 1000 cycles at 0.5 C (0.054% decay rate per cycle), comparable to the best literature value. The results prove the dominant role of highly exposed graphitic‐N in boosting both cathode performances.     

Nitrogen‐Doped Cobalt Oxide Nanostructures Derived from Cobalt–Alanine Complexes for High‐Performance Oxygen Evolution Reactions

Taking advantage of the self‐assembling function of amino acids, cobalt–alanine complexes are synthesized by straightforward process of chemical precipitation. Through a controllable calcination of the cobalt–alanine complexes, N‐doped Co₃O₄ nanostructures (N‐Co₃O₄) and N‐doped CoO composites with amorphous carbon (N‐CoO/C) are obtained. These N‐doped cobalt oxide materials with novel porous nanostructures and minimal oxygen vacancies show a high and stable activity for the oxygen evolution reaction. Moreover, the influence of calcination temperature, electrolyte concentration, and electrode substrate to the reaction are compared and analyzed. The results of experiments and density functional theory calculations demonstrate that N‐doping promotes the catalytic activity through improving electronic conductivity, increasing OH^? adsorption strength, and accelerating reaction kinetics. Using a simple synthetic strategy, N‐Co₃O₄ reserves the structural advantages of micro/nanostructured complexes, showing exciting potential as a catalyst for the oxygen evolution reaction with good stability.     

Composition‐ and Shape‐Controlled Synthesis and Optical Properties of ZnxCd1–xS Alloyed Nanocrystals

Composition‐tunable Zn_xCd_1–xS alloyed nanocrystals have been synthesized by a new approach consisting of thermolyzing a mixture of cadmium ethylxanthate (Cd(exan)₂) and zinc ethylxanthate (Zn(exan)₂) precursors in hot, coordinating solvents at relatively low temperatures (180–210 °C). The composition of the alloyed nanocrystals was accurately adjusted by controlling the molar ratio of Cd(exan)₂ to Zn(exan)₂ in the mixed reactants. The alloyed Zn_xCd_1–xS nanocrystals prepared in HDA/TOP (HDA: hexadecylamine; TOP: trioctylphosphine) solution exhibit composition‐dependent shape and phase structures as well as composition‐dependent optical properties. The shape of the Zn_xCd_1–xS nanocrystals changed from dot to single‐armed rod then to multi‐armed rod with a decrease of Zn content in the ternary nanoparticles. The alloying nature of the Zn_xCd_1–xS nanocrystals was consistently confirmed by the results of high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), and UV‐vis absorption and photoluminescence (PL) spectroscopy. Further, the shape‐controlled synthesis of the ternary alloyed nanocrystals was realized by selecting appropriate solvents. Uniform nanodots in the whole composition range were obtained from TOPO/TOP solution, (TOPO: trioctylphosphine oxide) and uniform nanorods in the whole composition range were prepared from HDA/OA solution (OA: octylamine). The effect of the reaction conditions, such as solvent, reaction temperature, and reaction time, on the PL spectra of the alloyed Zn_xCd_1–xS nanocrystals was also systematically studied, and the reaction conditions were optimized for improving the PL properties of the nanocrystals.     

Metal–Organic Framework‐Derived Graphitic Nanoribbons Anchored on Graphene for Electroionic Artificial Muscles

To achieve large bending displacement and fast response time under ultralow input voltages, as well as improved durability, advanced high‐performance ionic actuators still face crucial design challenges that must be resolved. Here, hierarchically porous and unzipped graphitic nanoribbons anchored on graphene as an efficient electrode material for high‐performance electroionic artificial muscles are reported. Using controlled solvothermal and pyrolysis methods, nanoarchitectured carbon is derived from a self‐templated potassium‐based metal–organic frameworks–graphene hybrid. The newly designed ionic actuator demonstrates excellent actuation performance, including large bending displacement (17.4 mm) and a strain difference of 0.51% at 0.5 V AC input, very fast response time (700 ms) at 0.5 V DC input, wide frequency response (0.1–15 Hz), and excellent cycling stability (92%) after 25 000 cycles without any delamination of electrodes under continuous electrical operation. The breakthrough in actuation performance mainly stems from the unzipping of hollow nanorods to hierarchical porous graphitic nanoribbons anchored on graphene with the enlarged surface area, large pore volume, stronger mechanical integrity, and emerging charge storage and transport ability. Further, the electroionic actuator shows promise when applied in the demonstration of a biomimicking Venus flytrap.     

Scalable All‐Evaporation Fabrication of Efficient Light‐Emitting Diodes with Hybrid 2D–3D Perovskite Nanostructures

Quasi‐2D (Q2D) lead halide perovskites have emerged as promising materials for light‐emitting diodes (LEDs) due to their tunable emission, slowed‐down carrier diffusion, and improved stability. However, they are primarily fabricated through solution methods, which hinders its large‐scale manufacture and practical applications. Physical‐vapor‐deposition (PVD) methods have well demonstrated the capability for reproducible, scalable, and layer‐by‐layer fabrication of high quality organic/inorganic thin films. Herein, for the first time, the full‐evaporation fabrication of organic–inorganic hybrid ((BA)₂Cs_n?1Pb_nBr_3n+1) Q2D–3D PeLEDs is demonstrated. The morphology and crystal phase of the perovskite are controlled from 3D to 2D by modulating material composition, annealing temperature, and film thicknesses. The confinement of carriers in 3D layers and the energy funnel effect are discovered and discussed. Importantly, a record high external quantum efficiency (EQE) of 5.3% based on evaporation method is achieved. Moreover, a centimeter‐scale PeLED (1.5 cm × 2 cm) is obtained. Furthermore, the T₅₀ lifetime of the device with an initial brightness of 100 cd m^?2 is found to be 90 min with a thin layer PMMA passivation, which is among the longest for all PVD processed PeLEDs. Overall, this work casts a solid stepping stone towards the fabrication of high‐performance PeLEDs on a large‐scale.     

Metal–Organic Frameworks Derived from Zero‐Valent Metal Substrates: Mechanisms of Formation and Modulation of Properties

The replicative construction of metal–organic frameworks (MOFs) templated with solvent‐insoluble solid substrates is of marked importance, as it allows for the assembly of 2D and 3D macro‐ and mesoscopic architectures with properties that are challenging to attain by the conventional solution‐based synthesis approach. This work reports an in situ and direct construction of MOFs from zero‐valent metal substrates via a green hydrothermal oxidation–MOF construction chemistry without the use of any additional metal source, chemical reagents, or acidification of solvent, and elucidates the zero‐valent metal derived formation mechanisms of MOFs and their structure modulation to 1D nanofibers (NFs), 2D film, and 3D core–shell microstructures. Through modulation of the competing surface oxidation‐dissolution and MOF crystallization kinetics, Al@MIL‐53 core–shell microstructures and MIL‐53 (Al) NFs are obtained that exhibit unique morphologies and marked properties superior to the conventional MIL‐53 (Al) powders. The generality of zero‐valent metal‐templated synthesis of MOFs is demonstrated with formation of MIL‐53 (Al), HKUST‐1, and ZIF‐7 polycrystalline films on Al, Cu, and Zn metal meshes, elucidating the significance of the approach utilizing solid metal substrate that can be easily processed into various shapes, architectures, and compositions.     

Efficient Ni2Co4P3 Nanowires Catalysts Enhance Ultrahigh‐Loading Lithium–Sulfur Conversion in a Microreactor‐Like Battery

High‐loading lithium–sulfur (Li–S) batteries suffer from poor electrochemical properties. Electrocatalysts can accelerate polysulfides conversion and suppress their migration to improve battery cyclability. However, catalysts for Li–S batteries usually lack a rational design. A d‐band tuning strategy is reported by alloying cobalt to metal sites of Ni₂P to enhance the interaction between polysulfides and catalysts. A molecular or atomic level analysis reveals that Ni₂Co₄P₃ is able to weaken the S? S bonds and lower the activation energy of polysulfides conversion, which is confirmed with temperature‐dependent experiments. Ni₂Co₄P₃ nanowires are further fabricated on a porous nickel scaffold to unfold the catalytic activity by its large surface area. Using a simple ion‐selective filtration shell, a microreactor‐like S cathode (MLSC) is constructed to realize ultrahigh S loading (25 mg cm^?2). As such, a microreactor design integrates reaction and separation in one cell and can effectively address the polysulfide issues, the MLSC cell demonstrates excellent properties of cyclability and high capacity (1223 mAh g^?1 at 0.1 C). More importantly, the catalyst's designs and microreactor strategies provide new approaches for addressing the complicated issues of Li–S batteries.     

High‐Performance Oxygen Reduction Electrocatalyst Derived from Polydopamine and Cobalt Supported on Carbon Nanotubes for Metal–Air Batteries

The development of nonprecious metal‐based electrocatalysts for the oxygen reduction reaction holds the decisive key to many energy conversion devices. Among several potential candidates, transition metal and nitrogen co‐doped carbonaceous materials are the most promising, yet their activity and stability are still insufficient to meet the needs of practical applications. In this study, a core–shell hybrid electrocatalyst is developed via the self‐polymerization of dopamine and cobalt on carbon nanotubes (CNTs), followed by high‐temperature pyrolysis. The polymer‐derived carbonaceous shell contains abundant structural defects and facilitates the formation of Co? N/C active sites, whereas the graphitic carbon nanotube core provides high electrical conductivity and corrosion resistance. These two components separately fulfill different functionalities, and jointly afford the catalyst with excellent electrochemical performance. In 1 m KOH, Co? N/CNT exhibits a positive half‐wave potential of ≈0.91 V, low peroxide yield of <7%, as well as great stability. When used as the air catalyst of primary Zn–air and Al–air batteries, this hybrid electrocatalyst enables large discharge current density, high peak power density, and prolonged operation stability.     

A High‐Performance Sodium‐Ion Hybrid Capacitor Constructed by Metal–Organic Framework–Derived Anode and Cathode Materials

Sodium‐ion hybrid capacitors (SIHCs) can potentially combine the virtues of high‐energy density of batteries and high‐power output as well as long cycle life of capacitors in one device. The key point of constructing a high‐performance SIHC is to couple appropriate anode and cathode materials, which can well match in capacity and kinetics behavior simultaneously. In this work, a novel SIHC, coupling a titanium dioxide/carbon nanocomposite (TiO₂/C) anode with a 3D nanoporous carbon cathode, which are both prepared from metal–organic frameworks (MOFs, MIL‐125 (Ti) and ZIF‐8, respectively), is designed and fabricated. The robust architecture and extrinsic pseudocapacitance of TiO₂/C nanocomposite contribute to the excellent cyclic stability and rate capability in half‐cell. Hierarchical 3D nanoporous carbon displays superior capacity and rate performance. Benefiting from the merits of structures and performances of anode and cathode materials, the as‐built SIHC achieves a high energy density of 142.7 W h kg^?1 and a high power output of 25 kW kg^?1 within 1–4 V, as well as an outstanding life span of 10 000 cycles with over 90% of the capacity retention. The results make it competitive in high energy and power–required electricity storage applications.     

Metal‐Phosphide‐Containing Porous Carbons Derived from an Ionic‐Polymer Framework and Applied as Highly Efficient Electrochemical Catalysts for Water Splitting

A novel phosphorus‐containing porous polymer is efficiently prepared from tris(4‐vinylphenyl)phosphane by radical polymerization, and it can be easily ionized to form an ionic porous polymer after treatment with hydrogen iodide. Upon ionic exchange, transition‐metal‐containing anions, such as tetrathiomolybdate (MoS₄ ^2?) and hexacyanoferrate (Fe(CN)₆ ^3?), are successfully loaded into the framework of the porous polymer to replace the original iodide anions, resulting in a polymer framework containing complex anions (termed HT‐Met, where Met = Mo or Fe). After pyrolysis under a hydrogen atmosphere, the HT‐Met materials are efficiently converted at a large scale to metal‐phosphide‐containing porous carbons (denoted as MetP@PC, where again Met = Mo or Fe). This approach provides a convenient pathway to the controlled preparation of metal‐phosphide‐loaded porous carbon composites. The MetP@PC composites exhibit superior electrocatalytic activity for the hydrogen evolution reaction (HER) under acidic conditions. In particular, MoP@PC with a low loading of 0.24 mg cm^?2 (on a glass carbon electrode) affords an iR‐corrected (where i is current and R is resistance) current density of up to 10 mA cm^?2 at 51 mV versus the reversible hydrogen electrode and a very low Tafel slope of 45 mV dec^?1, in rotating disk measurements under saturated N₂ conditions.     

Synergistic Regulation of Polysulfides Conversion and Deposition by MOF‐Derived Hierarchically Ordered Carbonaceous Composite for High‐Energy Lithium–Sulfur Batteries

To achieve a high sulfur loading is critical for high‐energy lithium–sulfur batteries. However, high sulfur loading, especially at a low electrolyte/sulfur ratio (E/S), usually causes low sulfur utilization, mainly caused by the slow redox kinetics of polysulfides and the passivation of the discharge product, poor electrically/ionically conducting Li₂S. Herein, by using cobalt‐based metal organic frameworks (Co‐MOFs) as precursors, a Co, N‐doped carbonaceous composite (Co, N‐CNTs (carbon nanotubes)‐CNS (carbon nanosheet)/CFC (carbon fiber cloth)) is fabricated with hierarchically ordered structure, which consists of a free‐standing 3D carbon fiber skeleton decorated with a vertical 2D carbon nanosheets array rooted by interwoven 1D CNTs. As an effective polysulfides host, the hierarchically ordered 3D conductive network with abundant active sites and voids can effectively trap polysulfides and provide fast electron/ions pathways to convert them. In addition, Co and N heteroatoms can strengthen the interaction with polysulfides and accelerate its reaction kinetics. More importantly, the interwoven CNTs with Co, N‐doping can induce 3D Li₂S deposition instead of conventional 2D deposition, which benefits improving sulfur utilization. Therefore, for Co, N‐CNTs‐CNS/CFC electrodes, even at a high sulfur loading of 10.20 mg cm^?2 with a low E/S of 6.94, a high reversible areal capacity of 7.42 mAh cm^?2 can be achieved with excellent cycling stability.     

Fe,Cu‐Coordinated ZIF‐Derived Carbon Framework for Efficient Oxygen Reduction Reaction and Zinc–Air Batteries

Zeolitic imidazole frameworks (ZIFs) offer rich platforms for rational design and construction of high‐performance nonprecious‐metal oxygen reduction reaction (ORR) catalysts owing to their flexibility, hierarchical porous structures, and high surface area. Herein, an Fe, Cu‐coordinated ZIF‐derived carbon framework (Cu@Fe‐N‐C) with a well‐defined morphology of truncated rhombic dodecahedron is facilely prepared by introducing Fe²⁺ and Cu²⁺ during the growth of ZIF‐8, followed by pyrolysis. The obtained Cu@Fe‐N‐C, with bimetallic active sites, large surface area, high nitrogen doping level, and conductive carbon frameworks, exhibits excellent ORR performance. It displays 50 mV higher half‐wave potential (0.892 V) than that of Pt catalysts in an alkaline medium and comparable performance to Pt catalysts in an acidic medium. In addition, it also has excellent durability and methanol resistance ability in both acidic and alkaline solutions, which makes it one of the best Pt‐free catalysts reported to date for ORR. Impressively, when being employed as a cathode catalyst in zinc–air batteries, Cu@Fe‐N‐C presents a higher peak power density of 92 mW cm^?2 than that of Pt/C (74 mW cm^?2) as well as excellent durability.     

Hollow Multivoid Nanocuboids Derived from Ternary Ni–Co–Fe Prussian Blue Analog for Dual‐Electrocatalysis of Oxygen and Hydrogen Evolution Reactions

Hydrogen generation from electrochemical water‐splitting is an attractive technology for clean and efficient energy conversion and storage, but it requires efficient and robust non‐noble electrocatalysts for hydrogen and oxygen evolution reactions (HER and OER). Nonprecious transition metal–organic frameworks (MOFs) are one of the most promising precursors for developing advanced functional catalysts with high porosity and structural rigidity. Herein, a new transition metal‐based hollow multivoid nanocuboidal catalyst synthesized from a ternary Ni–Co–Fe (NCF)‐MOF precursor is rationally designed to produce dual‐functionality toward OER and HER. Differing ion exchanging rates of the ternary transition metals within the prussian blue analog MOF precursor are exploited to produce interconnected internal voids, heteroatom doping, and a favorably tuned electronic structure. This design strategy significantly increases active surface area and pathways for mass transport, resulting in excellent electroactivities toward OER and HER, which are competitive with recently reported single‐function nonprecious catalysts. Moreover, outstanding electrochemical durability is realized due to the unique rigid and interconnected porous structure which considerably retains initial rapid charge transfer and mass transport of active species. The MOF‐based material design strategy demonstrated here exemplifies a novel and versatile approach to developing non‐noble electrocatalysts with high activity and durability for advanced electrochemical water‐splitting systems.     

Platinum Phosphors Containing an Aryl‐modified β‐Diketonate: Unusual Effect of Molecular Packing on Photo‐ and Electroluminescence

Three new FPt1 [(2‐(4′,6′‐difluorophenyl)pyridinato‐N,C2′)(2,4‐pentanedionato‐ O,O)Pt(II)] analogues, Ph‐FPt, CzP‐FPt, and mCzP‐FPt, chelated with a 3‐aryl‐substituted acac ligand were synthesized. As shown by the results of X‐ray diffraction, the nearest neighboring molecules in the FPt1, Ph‐FPt, and CzP‐FPt crystals have a Pt–Pt distance of ~4.5, 4.5, and 7.0 Å, respectively. In contrast, in the mCzP‐FPt crystals, the nearest neighboring molecules exhibit a Pt–Pt distance of only 3.49 Å. All four Pt complexes show the same monomeric emission spectrum in dilute solution. However, in the crystalline state, mCzP‐FPt with a clear Pt–Pt bimetallic interaction shows only the low‐energy orange broadband emission; complexes FPt1, Ph‐FPt, and CzP‐FPt without significant Pt–Pt interaction (Pt–Pt distance > 4 Å) give higher‐energy emission closely resembling that of the monomeric species. The results provide clear evidence that the Pt–Pt bimetallic interaction is responsible for the low‐energy broadband emission of these Pt complexes. Unlike in the crystalline state, all of the four platinum complexes in the thin film give only the low‐energy broadband emissions with some difference in wavelength. In a similar manner, these platinum complexes‐based, non‐doped electroluminescence (EL) devices also emit only low‐energy orange broadband light. The non‐doped EL device using CzP‐FPt as the emitter showed a very promising external quantum efficiency of 10%, nearly five times higher than that of the FPt1 control device. The higher EL efficiency of the CzP‐FPt non‐doped device is mainly ascribed to the lower concentration of Pt–Pt dimers that effectively suppresses the self‐quenching between the orange emissive dimers.