首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
    
Formamidinium lead triiodide (FAPbI3)‐based perovskite materials are of interest for photovoltaics in view of their close‐to‐ideal bandgap, allowing absorption of photons over a broad solar spectrum. However, FAPbI3‐based materials suffer from a notorious phase transition from the photoactive black phase (α‐FAPbI3) to nonperovskite yellow phase (δ‐FAPbI3) under ambient conditions. This transition dramatically reduces light absorbtion, thus, degrading the photovoltaic performance and stability of ensuring solar cells. In this study, 1‐hexyl‐3‐methylimidazolium iodide (HMII) ionic liquid (IL) is employed as an additive for the first time in FAPbI3 perovskite to overcome the above‐mentioned issues. HMII incorporation facilitates the grain coarsening of FAPbI3 crystal owing to its high‐polarity and high‐boiling point, which yields liquid domains between neighboring grains to reduce the activation energy of the grain‐boundary migration. As a result, the FAPbI3 active layer exhibits micron‐sized grains with substantially suppressed parasitic traps with an Urbach energy reduced by 2 meV. Hence, the resulting perovskite solar cell achieves an efficiency of 20.6% with notable increase in open circuit voltage (VOC) of 80 mV compared with HMII‐free cells (17.1%). More importantly, the HMII‐doped FAPbI3‐based cells show a striking enhancement in shelf‐stability under high humidity and thermal stress, retaining >80% of their initial efficiencies at 60 ± 10% relative humidity and ≈95% at 65 °C.  相似文献   

2.
    
Metal halide perovskite single crystals are promising for diverse optoelectronic applications due to their outstanding properties. In comparison to the bulk, the crystal surface suffers from high defect density and is moisture sensitive; however, surface modification strategies of perovskite single crystals are relatively deficient. Herein, solar cells based on methylammonium lead triiodide (MAPbI3) thin single crystals are selected as a prototype to improve single-crystal perovskite devices by surface modification. The surface trap passivation and protection against moisture of MAPbI3 thin single crystals are achieved by one bifunctional molecule 3-mercaptopropyl(dimethoxy)methylsilane (MDMS). The sulfur atom of MDMS can coordinate with bare Pb2+ of MAPbI3 single crystals to reduce surface defect density and nonradiative recombination. As a result, the modified devices show a remarkable efficiency of 22.2%, which is the highest value for single-crystal MAPbI3 solar cells. Moreover, MDMS modification mitigates surface ion migration, leading to enhanced reverse-bias stability. Finally, the cross-link of silane molecules forms a protective layer on the crystal surface, which results in enhanced moisture stability of both materials and devices. This work provides an effective way for surface modification of perovskite single crystals, which is important for improving the performance of single-crystal perovskite solar cells, photodetectors, X-ray detectors, etc.  相似文献   

3.
    
The cooperative assembly of biopolymers and small molecules can yield functional materials with precisely tunable properties. Here, the fabrication, characterization, and use of multicomponent hybrid gels as selective gas sensors are reported. The gels are composed of liquid crystal droplets self‐assembled in the presence of ionic liquids, which further coassemble with biopolymers to form stable matrices. Each individual component can be varied and acts cooperatively to tune gels' structure and function. The unique molecular environment in hybrid gels is explored for supramolecular recognition of volatile compounds. Gels with distinct compositions are used as optical and electrical gas sensors, yielding a combinatorial response conceptually mimicking olfactory biological systems, and tested to distinguish volatile organic compounds and to quantify ethanol in automotive fuel. The gel response is rapid, reversible, and reproducible. These robust, versatile, modular, pliant electro‐optical soft materials possess new possibilities in sensing triggered by chemical and physical stimuli.  相似文献   

4.
  相似文献   

5.
    
Perovskite solar cells have attracted significant attention in just the past few years in solar cell research fields, where the power conversion efficiency was beyond 22.1%. Now, the most important challenge for perovskite solar cells in practical applications is the stability issue. In this mini-review, we will summarize the degradation mechanism of perovskite solar cells, including the perovskite material itself and also the interfaces. While we also provide our opinion on improving the stability of perovskite solar cells.  相似文献   

6.
    
Self-assembled monolayers (SAMs) are widely used as carrier transport interlayers for enabling high-efficiency perovskite solar cells (PSCs). However, achieving uniform and pinhole-free monolayers on metal oxide (e.g., indium tin oxide, ITO) surfaces is still challenging due to the sensitivity of SAM adsorption to the complex oxide's surface chemistry. Here, the hydrofluoric acid and the subsequent UV–ozone treatment are employed to reconstruct the ITO surface by selectively removing the undesired terminal hydroxyl and hydrolysis product. This can significantly increase the ITO surface activity and area, thus facilitating the adsorption of high-density SAMs. The resultant fluorinated surface can also prevent the direct contact of ITO with the perovskite active layer and passivate the perovskite bottom interface. Benefiting from the synergistically improved perovskite film formation, charge extraction, energy level alignment, and interfacial chemical stability, the corresponding PSC achieves a greatly enhanced power conversion efficiency of 21.3%, along with an enhanced long-term stability as compared to the control counterpart. Furthermore, a semitransparent PSC with a certified efficiency of 19.0% (with a record fill factor of 84.1%) and a four-terminal perovskite/silicon tandem with an efficiency of 28.4% are also demonstrated.  相似文献   

7.
    
In this review, the factors influencing the power conversion efficiency (PCE) of perovskite solar cells (PSCs) is emphasized. The PCE of PSCs has remarkably increased from 3.8% to 23.7%, but on the other hand, poor stability is one of the main facets that creates a huge barrier in the commercialization of PSCs. Herein, a concise overview of the current efforts to enhance the stability of PSCs is provided; moreover, the degradation causes and mechanisms are summarized. The strategies to improve device stability are portrayed in terms of structural effects, a photoactive layer, hole‐ and electron‐transporting layers, electrode materials, and device encapsulation. Last but not least, the economic feasibility of PSCs is also vividly discussed.  相似文献   

8.
    
To develop high‐capacitance flexible solid‐state supercapacitors and explore its application in self‐powered electronics is one of ongoing research topics. In this study, self‐stacked solvated graphene (SSG) films are reported that have been prepared by a facile vacuum filtration method as the free‐standing electrode for flexible solid‐state supercapacitors. The highly hydrated SSG films have low mass loading, high flexibility, and high electrical conductivity. The flexible solid‐state supercapacitors based on SSG films exhibit excellent capacitive characteristics with a high gravimetric specific capacitance of 245 F g?1 and good cycling stability of 10 000 cycles. Furthermore, the flexible solid‐state supercapacitors are integrated with high performance perovskite hybrid solar cells (pero‐HSCs) to build self‐powered electronics. It is found that the solid‐state supercapacitors can be charged by pero‐HSCs and discharged from 0.75 V. These results demonstrate that the self‐powered electronics by integration of the flexible solid‐state supercapacitors with pero‐HSCs have great potential applications in storage of solar energy and in flexible electronics, such as portable and wearable personal devices.  相似文献   

9.
    
Molecular organization behavior and visible light absorption ability are important factors for organic materials to be used in efficient bulk heterojunction solar cells applications. In this context, a series of monosubstituted fluorenyl hexa‐peri‐hexabenzocoronene (FHBC) are synthesized with the aim to combine the self‐association property of the FHBC unit with broadened light absorption of a small molecule organic dye, bisthienylbenzothiadiazole (TBT). Optical and electrochemical properties of the FHBC compounds vary according to their structures. Introduction of a TBT unit into the FHBC system broadens the absorption. All of the FHBC compounds show strong π–π intermolecular association in solution. X‐ray scattering measurements on thermally extruded filaments and thin films showed ordered alignment of these compounds in the solid state. In atomic force microscopy experiments, nanoscale phase separation is observed in thin films of FHBC and fullerene derivative blends. Solar cell devices with these compounds as donors are fabricated. FHBC compounds with the TBT unit show higher short circuit current while the high open circuit voltages are maintained. With C60 derivative as acceptor, power conversion efficiency of 1.12% is achieved in the unoptimized solar cell devices under simulated solar irradiation. The efficiency was further improved to 1.64% when C70 derivative was used as the acceptor.  相似文献   

10.
    
High‐efficiency perovskite‐based solar cells can be fabricated via either solution‐processing or vacuum‐based thin‐film deposition. However, both approaches limit the choice of materials and the accessible device architectures, due to solvent incompatibilities or possible layer damage by vacuum techniques. To overcome these limitations, the lamination of two independently processed half‐stacks of the perovskite solar cell is presented in this work. By laminating the two half‐stacks at an elevated temperature (≈90 °C) and pressure (≈50 MPa), the polycrystalline perovskite thin‐film recrystallizes and the perovskite/charge transport layer (CTL) interface forms an intimate electrical contact. The laminated perovskite solar cells with tin oxide and nickel oxide as CTLs exhibit power conversion efficiencies of up to 14.6%. Moreover, they demonstrate long‐term and high‐temperature stability at temperatures of up to 80 °C. This freedom of design is expected to access both novel device architectures and pairs of CTLs that remain usually inaccessible.  相似文献   

11.
    
The organization of organic semiconductor molecules in the active layer of organic electronic devices has important consequences to overall device performance. This is due to the fact that molecular organization directly affects charge carrier mobility of the material. Organic field‐effect transistor (OFET) performance is driven by high charge carrier mobility while bulk heterojunction (BHJ) solar cells require balanced hole and electron transport. By investigating the properties and device performance of three structural variations of the fluorenyl hexa‐peri‐hexabenzocoronene (FHBC) material, the importance of molecular organization to device performance was highlighted. It is clear from 1H NMR and 2D wide‐angle X‐ray scattering (2D WAXS) experiments that the sterically demanding 9,9‐dioctylfluorene groups are preventing π–π intermolecular contact in the hexakis‐substituted FHBC 4 . For bis‐substituted FHBC compounds 5 and 6 , π–π intermolecular contact was observed in solution and hexagonal columnar ordering was observed in solid state. Furthermore, in atomic force microscopy (AFM) experiments, nanoscale phase separation was observed in thin films of FHBC and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PC61BM) blends. The differences in molecular and bulk structural features were found to correlate with OFET and BHJ solar cell performance. Poor OFET and BHJ solar cells devices were obtained for FHBC compound 4 while compounds 5 and 6 gave excellent devices. In particular, the field‐effect mobility of FHBC 6 , deposited by spin‐casting, reached 2.8 × 10?3 cm2 V?1 s and a power conversion efficiency of 1.5% was recorded for the BHJ solar cell containing FHBC 6 and PC61BM.  相似文献   

12.
  相似文献   

13.
    
The electrical repair of device circuits has been considered a main issue in the area of electronic packaging. Demand for self‐healing conductors as cost‐effective and promising materials for prolonging the durability of devices has increased. Recently, diverse designs of self‐healing and deformable circuits have been introduced in virtue of their high stretchability and conductivity. However, encapsulating a liquid metal with a polymer in a micro‐size container is essential for real applications. In this work, core–shell‐structured liquid metal microcapsules (LMCs, diameter = 2–10 µm) are synthesized via in situ polymerization of urea‐formaldehyde onto liquid metal colloids. Passivation films comprising LMC/polymer composites are simply prepared using phase separation between the capsules and the liquid prepolymer. Capsules ruptured by cutting or pressing release and transport liquid metal to the damaged sites, leading to effective recovery of electrical pathways. Such self‐healing of the metal contacts shows the high potential of LMCs for smart passivation of electronic devices. As an example, flexible perovskite solar cells incorporated with the passivation film demonstrate perfect recovery of the photovoltaic parameters immediately after cutting the metal contact, exhibiting a power conversion efficiency (PCE) retention of 99% relative to the initial value (PCE = 15.07%).  相似文献   

14.
    
A key issue for perovskite solar cells is the stability of perovskite materials due to moisture effects under ambient conditions, although their efficiency is improved constantly. Herein, an improved CH3NH3PbI3?xClx perovskite quality is demonstrated with good crystallization and stability by using water as an additive during crystal perovskite growth. Incorporating suitable water additives in N,N‐dimethylformamide (DMF) leads to controllable growth of perovskites due to the lower boiling point and the higher vapor pressure of water compared with DMF. In addition, CH3NH3PbI3?xClx · nH2O hydrated perovskites, which can be resistant to the corrosion by water molecules to some extent, are assumed to be generated during the annealing process. Accordingly, water additive based perovskite solar cells present a high power conversion efficiency of 16.06% and improved cell stability under ambient conditions compared with the references. The findings in this work provide a route to control the growth of crystal perovskites and a clue to improve the stability of organic–inorganic halide perovskites.  相似文献   

15.
    
All organic charge‐transporting layer (CTL)‐featured perovskite solar cells (PSCs) exhibit distinct advantages, but their scaling‐up remains a great challenge because the organic CTLs underneath the perovskite are too thin to achieve large‐area homogeneous layers by spin‐coating, and their hydrophobic nature further hinders the solution‐based fabrication of perovskite layer. Here, an unprecedented anchoring‐based coassembly (ACA) strategy is reported that involves a synergistic coadsorption of a hydrophilic ammonium salt CA‐Br with hole‐transporting triphenylamine derivatives to acquire scalable and wettable organic hole‐extraction monolayers for p–i–n structured PSCs. The ACA route not only enables ultrathin organic CTLs with high uniformity but also eliminates the nonwetting problem to facilitate large‐area perovskite films with 100% coverage. Moreover, incorporation of CA‐Br in the ACA strategy can distinctly guarantee a high quality of electronic connection via the cations' vacancy passivation. Consequently, a high power‐conversion‐efficiency (PCE) of 17.49% is achieved for p–i–n structured PSCs (1.02 cm2), and a module with an aperture area of 36 cm2 shows PCE of 12.67%, one of the best scaling‐up results among all‐organic CTL‐based PSCs. This work demonstrates that the ACA strategy can be a promising route to large‐area uniform interfacial layers as well as scaling‐up of perovskite solar cells.  相似文献   

16.
    
A simple method is demonstrated to improve the film‐forming properties and air stability of a conjugated polyelectrolyte (CPE) without complicated synthesis of new chemical structures. An anionic surfactant, sodium dodecybenzenesulfonate (SDS), is mixed with cationic CPEs. The electrostatic attraction between these two oppositely‐charged materials provides the driving force to form a stable CPE‐surfactant complex. Compared with a pure CPE, this electrostatic complex is not only compatible with highly hydrophobic bulk‐heterojunction (BHJ) films, e.g. poly(3‐hexylthiophene):[6,6]‐phenyl C61 butyric acid methyl ester (P3HT:PCBM), but also works well with other low bandgap polymer‐based BHJ films. Using this complex as a cathode interface layer, a high power conversion efficiency of 4% can be obtained in P3HT:PCBM solar cells together with improved stability in air. Moreover, ～20% performance enhancement can also be achieved when the complex is used as an interlayer to replace calcium metal for low bandgap polymer‐based BHJ systems.  相似文献   

17.
    
Nickel oxide (NiOX) has a crucial role in enhancing the efficiency and stability of p-i-n inverted perovskite solar cells (PSCs), which hold great potential for commercialization. However, improving contact passivation between perovskites and NiOX is a challenge due to a hindered buried interface. In order to address this issue, self-assembled monolayers (SAMs) are introduced as a buffer layer to prevent direct contact and non-radiative recombination. While, the large dipole moment of SAMs increases the work function of NiOX, which is crucial for enhancing hole transport performance, given the low interfacial potential barrier for hole transfer. By a combination of the first-principles calculations, drive-level capacitance profiling, and transient absorption spectrum characterization, the understanding of the ion-dipole interactions and interface passivation mechanism of potassium fluoride (KF) ultra-thin buffer layer between SAMs and perovskites is provided. The efficiency of inverted PSCs as high as 23.25% is obtained, and the unencapsulated devices kept 90% of initial efficiency following 1400 h aging under nitrogen, which demonstrate remarkable long-term stability as well. This novel strategy highlights the significance of SAMs dipole moment at the NiOX/perovskites interface and provides a new approach to address buried interfaces for high-efficiency and long-term stability in inverted PSCs.  相似文献   

18.
    
The applications of organotin halide perovskites are limited because of their chemical instability under ambient conditions. Upon air exposure, Sn2+ can be rapidly oxidized to Sn4+, causing a large variation in the electronic properties. Here, the role of organic cations in degradation is investigated by comparing methylammonium tin iodide (MASnI3) and formamidinium tin iodide (FASnI3). Through chemical analyses and theoretical calculations, it is found that the organic cation strongly influences the oxidation of Sn2+ and the binding of H2O molecules to the perovskite lattice. On the one hand, Sn2+ can be easily oxidized to Sn4+ in MASnI3, and replacing MA with FA reduces the extent of Sn oxidation; on the other hand, FA forms a stronger hydrogen bond with H2O than does MA, leading to partial expansion of the perovskite network. The two processes compete in determining the material's conductivity. It is noted that the oxidation is a difficult process to prevent, while the water effect can be largely suppressed by reducing the moisture level. As a result, FASnI3‐based conductors and photovoltaic cells exhibit much better reproducibility as compared to MASnI3‐based devices. This study sheds light on the development of stable Pb‐free perovskite optoelectronic devices through new material design.  相似文献   

19.
    
In the last few years, organometal halide perovskites (OHPs) have emerged as a promising candidate for photovoltaic (PV) applications. A certified efficiency as high as 23.7% has been achieved, which is comparable with most of the well‐established PV technologies. Their good solubility due to the ionic nature enables versatile low‐temperature solution processes, including blade coating, slot‐die coating, etc., most of which are scalable and compatible with roll‐to‐roll large‐scale manufacturing processes. The low cost, high efficiency, and facile processable features make perovskite solar cells (PSCs) a very competitive PV technology. Despite the great progress, long‐term durability concerns, toxicity issues of both materials and manufacturing process, and lack of robust high‐throughput production technology for fabricating efficient large‐area modules are major obstacles toward commercialization. In this review, the recent progress of commercially available process of PSCs is surveyed, the underlying determinants for upscaling high‐quality PSCs from hydrodynamic characteristics and crystallization thermodynamic mechanism are identified, the influence of external stress factors on stability of PSCs and intrinsic instability mechanism in OHPs themselves is revealed, and the environmental impact and sustainable development of PSC technology are analyzed. Strategies and opportunities for large‐scale production of PSCs are suggested to promote the development of PSCs toward commercialization.  相似文献   

20.
    
Defect‐mediated carrier recombination at the interfaces between perovskite and neighboring charge transport layers limits the efficiency of most state‐of‐the‐art perovskite solar cells. Passivation of interfacial defects is thus essential for attaining cell efficiencies close to the theoretical limit. In this work, a novel double‐sided passivation of 3D perovskite films is demonstrated with thin surface layers of bulky organic cation–based halide compound forming 2D layered perovskite. Highly efficient (22.77%) mixed‐dimensional perovskite devices with a remarkable open‐circuit voltage of 1.2 V are reported for a perovskite film having an optical bandgap of ≈1.6 eV. Using a combination of experimental and numerical analyses, it is shown that the double‐sided surface layers provide effective defect passivation at both the electron and hole transport layer interfaces, suppressing surface recombination on both sides of the active layer. Despite the semi‐insulating nature of the passivation layers, an increase in the fill factor of optimized cells is observed. The efficient carrier extraction is explained by incomplete surface coverage of the 2D perovskite layer, allowing charge transport through localized unpassivated regions, similar to tunnel‐oxide passivation layers used in silicon photovoltaics. Optimization of the defect passivation properties of these films has the potential to further increase cell efficiencies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号