Ternary organic solar cells based on non-fullerene acceptors: A review

Organic solar cells (OSCs) have reached their second golden age in recent two years with a boosted number of publications. Non-fullerene acceptor (NFA) materials have become a rising star in the field which are widely applied in organic solar cells because of their excellent optoelectronic properties, such as strong light-harvesting ability and tunable energy level. Unlike the low synthetic flexibility and high production cost of fullerene materials, NFAs exhibit flexible structures, and relatively low fabrication costs. Recently, the ternary strategy has become another hot research topic in the field, which introduces a third component into the binary host system for OSCs. The application of a ternary strategy can break the limits of light absorption brought by the host system, improve the morphology and energy level alignment for the active layer and thus improved the efficiency of organic solar cell devices. Benefiting from the advancement in both NFA and ternary strategy, the power conversion efficiency (PCE) of organic solar cell has exceeded over 17.5% to date. A comprehensive review of the recent progress in NFA based ternary OSCs (TOSCs) is needed in the field. Herein, this review mainly focuses on recent research on ternary organic solar cells using NFA materials during the last two years. Firstly, device physics and frequently used active materials in NFA based TOSCs are summarized and discussed. Then, the recent reported high-performance NFA based TOSCs are reviewed. Finally, the outlook and future research direction in the field are proposed. This review aims to provide an insight into NFA based TOSCs and help researchers to explore the full potential of OSCs.     

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Ternary strategies have attracted extensive attention due to their potential in improving power conversion efficiencies (PCEs) of single‐junction polymer solar cells (PSCs). In this work, a novel wide bandgap polymer donor (E_g^opt ≈ 2.0 eV) named PBT(E)BTz with a deep highest occupied molecular orbital (HOMO) level (≈?5.73 eV) is designed and synthesized. PBT(E)BTz is first incorporated as the third component into the classic PBDB‐T‐SF:IT‐4F binary PSC system to fabricate efficient ternary PSCs. A higher PCE of 13.19% is achieved in the ternary PSCs with a 5% addition of PBT(E)BTz over binary PSCs (12.14%). Similarly, addition of PBT(E)BTz improves the PCE for PBDB‐T:IT‐M binary PSCs from 10.50% to 11.06%. The study shows that the improved PCE in ternary PSCs is mainly attributed to the suppressed charge carrier recombination and more balanced charge transport. The generality of PBT(E)BTz as a third component is further evidenced in another efficient binary PSC system—PBDB‐TF:BTP‐4Cl: an optimized PCE of 16.26% is realized in the ternary devices. This work shows that PBT(E)BTz possessing a deep HOMO level as an additional component is an effective ternary PSC construction strategy toward enhancing device performance. Furthermore, the ternary device with 5% PBT(E)BTz displays better thermal and light stability over binary devices.     

Mechanistic Investigation into Dynamic Function of Third Component Incorporated in Ternary Near‐Infrared Nonfullerene Organic Solar Cells

Organic solar cells (OSCs) consisting of an ultralow‐bandgap nonfullerene acceptor (NFA) with an optical absorption edge that extends to the near‐infrared (NIR) region are of vital interest to semitransparent and tandem devices. However, huge energy‐loss related to inefficient charge dissociation hinders their further development. The critical issues of charge separation as exemplified in NIR‐NFA OSCs based on the paradigm blend of PTB7–Th donor (D) and IEICO–4F acceptor (A) are revealed here. These studies corroborate efficient charge transfer between D and A, accompanied by geminate recombination of photo‐excited charge carriers. Two key factors restricting charge separation are unveiled as the connection discontinuity of individual phases in the blend and long‐lived interfacial charge‐transfer states (CTS). By incorporation of a third‐component of benchmark ITIC or PC₇₁BM with various molar ratios, these two issues are well‐resolved accordingly, yet in distinctly influencing mechanisms. ITIC molecules modulate film morphology to create more continuous paths for charge transportation, whereas PC₇₁BM diminishes CTS and enhances electron transfer at the D/A interfaces. Consequently, the optimal untreated ternary OSCs comprising 0.3 wt% ITIC and 0.1 wt% PC₇₁BM in the blend deliver higher J_SC values of 21.9 and 25.4 mA cm^‐2, and hence increased PCE of 10.2% and 10.6%, respectively.     

Optical and electronic property tailoring by MoS2-polymer hybrid solar cell

The ternary blend system such as binary donor and an acceptor or binary acceptor and a donor offers a way to improve the power conversion efficiency of the polymer solar cells (PSCs) by enhancing optical properties and electrical properties. In this work, PTB7, PC₇₁BM and Molybdenum disulfide nano-sheet (MoS₂NS) ternary blend system were investigated as an active material for OPV. The optimized ternary blend system showed increment of 17% power conversion efficiency (PCE) from 6.98% to 8.18%. The origin of improved PCE mainly arises from the significant increment in J_SC and marginal change in V_OC and FF. This improved PCE is due to increased light harvesting and improved charge carrier mobility in the active matrix. The marginal enhancement in V_OC and FF was correlated with the density of trap states (DOS) obtained from capacitance measurement of the device. The optical absorption and energy transfer mechanism of the ternary blend film is explained by absorption and photoluminescence measurement respectively. Further, the conversion efficiency due to improved charge carrier transport was described by modified SCLC mobility measurements for electron and hole only devices. The obtained result suggests that presence of MoS₂NS along with PTB7:PC₇₁BM binary system play dual role like an improved charge transport layer as well as light harvesting.     

Efficient ternary polymer solar cells by optimizing photogenerated exciton dissociation and photon harvesting with a short wavelength absorption polymer acceptor as the third component

Ternary blend films, obtained by introducing a third component (a second acceptor as the third component) to a binary polymer solar cell (PSC), are a promising ternary strategy because the light absorption range, surface morphology, and charge carrier transport of the photoactive layer may be optimized, as can the energy level alignment between the donor and the acceptor. In this work, acceptors such as the short-wavelength-absorption polymer N2200 and the long-wavelength-absorption small molecule FOIC were combined with the donor PBDB-T-2F to construct ternary blends. The optimized ternary PSC could achieve a power conversion efficiency (PCE) of 13.98%, which is higher than the efficiencies of binary PSCs based on PBDB-T-2F:FOIC (12.65%) and PBDB-T-2F:N2200 (9.36%). The enhanced PCE of the ternary PSC is based on the high electron mobility, balanced charge transport, optimized surface morphology and charge carrier kinetics and the extended light absorption of the ternary photoactive layer, realized by adjusting the ratio of FOIC:N2200. Our results indicate that mixing a polymer acceptor into a binary photoactive layer to form a ternary blend photoactive layer is a valuable strategy for improving photovoltaic performance.     

Rational Mutual Interactions in Ternary Systems Enable High-Performance Organic Solar Cells

Ternary organic solar cells (TOSCs) offer a facile and efficient approach to increase the power conversion efficiencies (PCEs). However, the critical roles that guest components play in complicated ternary systems remain poorly understood. Herein, two acceptors named LA1 and LA9 with differing crystallinity are investigated. The overly crystalline LA9 induces large self-aggregates in PM6:LA9 binary system, resulting in a lower PCE (13.12%) compared to PM6:LA1 device (13.89%). Encouragingly, both acceptors are verified as efficient guest candidates into the host binary PM6:NCBDT-4Cl (PCE = 13.48%) and afford markedly improved PCEs up to 15.39% and 15.75% in LA1 and LA9 ternary devices, respectively. Interestingly, the higher crystallinity LA9 reveals smaller interaction energies with both the host acceptor and donor PM6. Compared to LA1, the appropriate mutual interactions in the LA9 ternary system not only induces the orderly crystallinity of PM6 but also better compatibility with the host acceptor, generating further optimized molecular orientations and ternary morphology. Therefore, enhanced charge transport and minimized recombination loss are detected in LA9 ternary devices, affording the most competitive performance among Y6-sbsent TOSCs. This work suggests that complicated intermolecular interactions should be seriously considered when fabricating state-of-the-art multiple components OSCs.     

Highly Efficient Ternary Solar Cells with Efficient Förster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Introducing a third component into organic bulk heterojunction solar cells has become an effective strategy to improve photovoltaic performance. Meanwhile, the rapid development of non-fullerene acceptors (NFAs) has pushed the power conversion efficiency (PCE) of organic solar cells (OSCs) to a higher standard. Herein, a series of fullerene-free ternary solar cells are fabricated based on a wide bandgap acceptor, IDTT-M, together with a wide bandgap donor polymer PM6 and a narrow bandgap NFA Y6. Insights from the morphological and electronic characterizations reveal that IDTT-M has been incorporated into Y6 domains without disrupting its molecular packing and sacrificing its electron mobility and work synergistically with Y6 to regulate the packing pattern of PM6, leading to enhanced hole mobility and suppressed recombination. IDTT-M further functions as an energy-level mediator that increases open-circuit voltage (V_OC) in ternary devices. In addition, efficient Förster resonance energy transfer (FRET) between IDTT-M and Y6 provides a non-radiative pathway for facilitating exciton dissociation and charge collection. As a result, the optimized ternary device features a significantly improved PCE up to 16.63% with simultaneously enhanced short-circuit current (J_SC), V_OC, and fill factor (FF).     

Ternary organic solar cells with improved efficiency and stability enabled by compatible dual-acceptor strategy

To further elevate the power conversion efficiency (PCE) of organic solar cells (OSCs), ternary strategy is one of the most efficient methods via simply incorporating a suitable third component. Here, a nonfullerene small molecule acceptor MOITIC was incorporated into the state-of-art PM6:Y6 binary system to further enhance the photovoltaic performance. Detailed investigation revealed that MOITIC exhibited a good miscibility and compatibility with Y6, forming alloy-like acceptors in the ternary blends. The alloy-like phase promoted the phase separation and optimized the morphology of ternary blend, which afforded higher and more balanced carrier mobility and reduced charge recombination in devices. Moreover, the larger energy offset between PM6 and MOITIC:Y6 acceptor alloy is beneficial to enhance open-circuit voltage (V_oc) of corresponding devices. As a consequence, the optimized ternary OSC (PM6:Y6:MOITIC = 1:1:0.1) showed a significantly increased PCE of 17.1% with simultaneously enhanced V_oc of 0.882 V, short-circuit current density (J_sc) of 25.6 mA cm⁻², and fill factor (FF) of 75.7%, which has about 9% enhancement compared to the control binary PM6:Y6 (15.7%). In addition, the optimized ternary device exhibited better stability. This work indicates that ternary strategy via combining two compatible small molecule acceptors is effective to simultaneously improve the efficiency and stability of OSCs.     

Ternary organic solar cells with PCEs of up to 16.6% by two complementary acceptors working in alloy-like model

Nowadays, improving the power conversion efficiency (PCE) of organic solar cells (OSCs) is still the most concerned issue. Ternary strategy can effectively improve the PCE while maintaining the single junction device structure from well-developed material systems. Herein, a brominated non-fullerene acceptor of ITC-2Br1 is used as the third component to optimize the efficient PM6:Y6 binary system with highly complementary absorption and higher LUMO value as compared with Y6. With 15% wt ITC-2Br1 in the ternary system, the device achieved a best PCE of 16.6%, which is significantly higher than that of its binary counterpart (15.6%). Through the study of neat and blend films, it is found that ITC-2Br1 and Y6 show good miscibility and the absorption of ternary blend film almost cover the whole range from visible and near-IR regions. The optimized ternary device shows an alloy-like working model with improved carrier lifetime and enhanced charge collection efficiency. This work provides a good example for the third component selection in ternary system, and the ternary strategy is a facile and effective method to boost the device performance of OSCs.     

Secondary Bonds Modifying Conjugate‐Blocked Linkages of Biomass‐Derived Lignin to Form Electron Transfer 3D Networks for Efficiency Exceeding 16% Nonfullerene Organic Solar Cells

Fabricating high‐efficient electron transporting interfacial layers (ETLs) with isotropic features is highly desired for all‐directional electron transfer/collection from an anisotropic active layer, achieving excellent power conversion efficiency (PCEs) on nonfullerene acceptor (NFA) organic solar cells (OSCs). The complicated synthesis and cost‐consumption in exploring versatile materials arouse great interest in the development of binary‐doping interlayers without phase separation and flexible manipulation. Herein, for the first time, a novel cathode interfacial layer based on biomass‐derived demethylated kraft lignin (D_MeKL) is proposed. Features of multiple phenolic‐hydroxyl (PhOH) and uniform‐distributed render D_MeKL to exhibit an excellent bonding capacity with amino terminal substituted perylene diiminde (PDIN), and successfully form a high‐efficient isotropic electron transfer 3D network. Synchronously, secondary bonds completely modify conjugate‐blocked linkages of D_MeKL, significantly enhance the electron transporting performance on cross‐section and vertical‐sections, and repair the contact of PDIN with active layer. The D_MeKL/PDIN‐based 3D‐network exhibits well‐matched work function (WF) (–4.34 eV) with cathode (–4.30 eV) and energy level of electron acceptor (–4.11 eV). D_MeKL/PDIN‐based NFAs‐OSC shows excellent short‐circuit current density (26.61 mA cm^–2) and PCE (16.02%) beyond the classic PDIN‐based NFA‐OSC (25.64 mA cm^–2, 15.41%), which is the highest PCEs among biomaterials interlayers. The results supply a novel method to achieve high‐efficient cathode interlayer for NFAs‐OSCs.     

Efficient Quaternary Organic Solar Cells with Parallel‐Alloy Morphology

Two compatible donors (PBDB‐T and PTB7‐Th) and two miscible acceptors (ITIC and FOIC) are employed to deliver a parallel‐alloy morphology model in non‐fullerene‐based quaternary organic solar cells. PBDB‐T and PTB7‐Th form a parallel link with a slight adjustment of molecular packing into enhanced face‐on crystallites while ITIC disperses into discontinuous FOIC microcrystal regions to form continuous and ordered alloy‐like acceptor phases. Characterization of blend morphology highlights the parallel‐alloy model—enabled by the introduction of PBDB‐T and ITIC, which contributes to improved molecular packing and reduced domain size resulting in efficient charge generation and consistent transport channels. This successful parallel‐alloy quaternary blend morphology demonstrates an enhanced optical absorption, optimized domain size, and nanostructures toward simultaneous improvement in charge transfer and transport. Therefore, a power conversion efficiency of 12.52% is realized for a quaternary device which is 6% higher than the ternary device (PBDB‐T:PTB7‐Th:FOIC) and 12% higher than the binary device (PTB7‐Th:FOIC). Domination of quaternary devices over ternary and binary blends, which is another feasible way to realize highly efficient devices through further investigation of quaternary OSCs, is presented.     

Small molecule ternary solar cell with two synergistic electron acceptors for enhanced photovoltaic performance

In recent years, tremendous progresses have been achieved for solution processed organic solar cells (OSCs). The strategy of adding a third component to fabricate ternary solar cells has emerged as an effective method to enhance the power conversion efficiency (PCE) of devices. Furthermore, small molecules feature as lower viscosity and excellent repeatability which facilitate the effective morphology control during fabrication process for enhanced photovoltaic performance. Herein, we report a series of ternary solar cells based on a liquid crystal molecule BTR and two electron acceptors of PC₇₁BM and Y6. These molecules show complementary absorption to broaden spectra coverage and form energy levels cascade for efficient charge transfer. Meanwhile, thanks to the improved molecular packing and formed efficient charge transport network in the ternary blend film, the optimal ternary device possesses the improved charge dynamics and suppressed charge recombination. Thus, ternary solar cells deliver the highest PCE of 11.82% with simultaneously enhanced parameters of J_SC, V_OC and FF. This finding further illustrates the important roles of synergistic effect of fullerenes and non-fullerene acceptors in fabricating highly efficient ternary solar cells.     

Atomic Optimization on Pyran-Fused Nonfullerene Acceptor Enables Organic Solar Cells With an Efficiency Approaching 16% and Reduced Energy Loss

Atomic replacement on platforms of nonfullerene acceptor (NFA) with already excellent performance is expected to further optimize the energy levels, absorptions, and even charge transfer dynamics of NFAs effectively without greatly destroying their superior molecular conformations. On the basis of high-performance F-series NFAs, the structural optimization at atomic level is performed by replacing sulfur atoms in FO-2Cl with selenium atoms, thus affording a new NFA labeled as FOSe-2Cl. FOSe-2Cl not only inherits the good planar configuration of FO-2Cl, but also exhibits more suitable energy levels, redshifted absorption, enhanced molecular packing, and accelerative charge transfer/transport dynamics compared with those of FO-2Cl. With a widely used polymer PM6 as the donor, organic solar cell (OSC) based on FOSe-2Cl affords a significantly improved power conversion efficiency (PCE) of 15.94% with a reduced energy loss (E_loss) of 0.670 eV, with respect to that of FO-2Cl-based OSC with a PCE of 14.94% and E_loss of 0.706 eV. The result represents the best performance reported to date for pyran-fused NFAs and F-series NFAs-based binary OSCs, providing another promising platform to achieve the state-of-the-art OSCs in addition to the well-known Y-series NFAs.     

Improving charge transport and suppressing charge recombination in small molecule ternary solar cells via incorporating Bis-PC71BM as a cascade material

The development of small molecule organic solar cells (SMOSCs) has attracted considerable attention and achieved comparable power conversion efficiency (PCE) with polymer solar cells. Here, we demonstrate a bulk heterojunction (BHJ) small molecular solar cell with PCE of 5.31% by incorporating Bisadduct of phenyl-C₇₁-butyric acid methyl ester (Bis-PC₇₁BM) as an additional acceptor material into the host binary blend of 2-[4-(N-butyl-N-phenylamino)-2,6-dihydroxyphenyl]-4-[(4-(N-butyl-N-phenylamino)-2,6-dihydroxyphenyl)-2,5-dien-1-ylidene]-3-oxocyclobut-1-en-1-olate (SQ-BP): [6,6]-phenyl C₇₁ butyric acid methyl ester (PC₇₁BM). The short circuit current (J_SC) and the fill factor (FF) of ternary SMOSCs are improved by decreasing the carrier recombination loss, increasing exciton dissociation and enhancing the carrier transport. The transient photovoltage (TPV) measurement indicates that the gradient HOMO energy alignment suppresses the charge recombination and leads to the increased charge carrier lifetime in ternary SMOSCs. As a result, the PCE of ternary devices with 5 wt% Bis-PC₇₁BM is about 20% greater than that of SQ-BP: PC₇₁BM based binary SMOSCs.     

Molecular Orientation Unified Nonfullerene Acceptor Enabling 14% Efficiency As‐Cast Organic Solar Cells

Molecular orientation and π–π stacking of nonfullerene acceptors (NFAs) determine its domain size and purity in bulk‐heterojunction blends with a polymer donor. Two novel NFAs featuring an indacenobis(dithieno[3,2‐b:2?,3?‐d]pyrrol) core with meta‐ or para‐alkoxyphenyl sidechains are designed and denoted as m‐INPOIC or p‐INPOIC , respectively. The impact of the alkoxyl group positioning on molecular orientation and photovoltaic performance of NFAs is revealed through a comparison study with the counterpart ( INPIC‐4F ) bearing para‐alkylphenyl sidechains. With inward constriction toward the conjugated backbone, m‐INPOIC presents predominant face‐on orientation to promote charge transport. The as‐cast organic solar cells (OSCs) by blending m‐INPOIC and PBDB‐T as active layers exhibit a power conversion efficiency (PCE) of 12.1%. By introducing PC₇₁BM as the solid processing‐aid, the ternary OSCs are further optimized to deliver an impressive PCE of 14.0%, which is among the highest PCEs for as‐cast single‐junction OSCs reported in literature to date. More attractively, PBDB‐T: m‐INPOIC :PC₇₁BM based OSCs exhibit over 11% PCEs even with an active layer thickness over 300 nm. And the devices can retain over 95% of PCE after storage for 20 days. The outstanding tolerance to film thickness and outstanding stability of the as‐cast devices make m‐INPOIC a promising candidate NFA for large‐scale solution‐processable OSCs.     

Wide Bandgap Molecular Acceptors with a Truxene Core for Efficient Nonfullerene Polymer Solar Cells: Linkage Position on Molecular Configuration and Photovoltaic Properties

Two wide bandgap star‐shaped small molecular acceptors, para‐TrBRCN and meta‐TrBRCN , are synthesized for efficient nonfullerene polymer solar cells (PSCs). The tiny structural variation by just changing the linkage positions affects largely the inherent properties of the resulting molecules. Both molecules have a nonplanar 3D structure, which can prevent the excessively aggregation to realize the optimized morphology and ideal domain size in their active blends. Compared to para‐TrBRCN , meta‐TrBRCN exhibits the smaller distortions between the truxene skeleton and the benzothiadiazole units, which would also lead to the enhanced π–π stacking and charge transfer. When blending with PTB7‐Th, high power conversion efficiencies (PCEs) of 10.15% and 8.28% are obtained for meta‐TrBRCN and para‐TrBRCN devices, respectively. To make up the weak absorption of above binary active blend in the longer wavelength region and increase the whole device performance further, low bandgap 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone)‐5,5,11,11‐tetrakis(4‐hexylthienyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]‐dithiophene (ITIC‐Th) is added as the second acceptor material to fabricate ternary blend PSCs. After adding 20 wt% of ITIC‐Th, the resulting devices exhibit the well‐balanced optical absorption and fine‐tuned morphology, giving rise to the significantly improved PCE of 11.40% with much higher J _sc of 18.25 mA cm^?2 and fill factor of 70.2%.     

A Cross‐Linkable Donor Polymer as the Underlying Layer to Tune the Active Layer Morphology of Polymer Solar Cells

For polymer solar cells (PSCs) with conventional configuration, the vertical composition profile of donor:acceptor in active layer is detrimental for charge carrier transporting/collection and leads to decreased device performance. A cross‐linkable donor polymer as the underlying morphology‐inducing layer (MIL) to tune the vertical composition distribution of donor:acceptor in the active layer for improved PSC device performance is reported. With poly(thieno[3,4‐b]‐thiophene/benzodithiophene):[6,6]‐phenyl C₇₁‐butyric acid methyl ester (PTB7:PC₇₁BM) as the active layer, the MIL material, PTB7‐TV , is developed by attaching cross‐linkable vinyl groups to the side chain of PTB7. PSC device with PTB7‐TV layer exhibits a power conversion efficiency (PCE) of 8.55% and short‐circuit current density (J_SC) of 15.75 mA cm^?2, in comparison to PCE of 7.41% and J_SC of 13.73 mA cm^?2 of the controlled device. The enhanced device performance is ascribed to the much improved vertical composition profile and reduced phase separation domain size in the active layer. These results demonstrate that cross‐linked MIL is an effective strategy to improve photovoltaic performance of conventional PSC devices.     

Single Component Organic Solar Cells Based on Oligothiophene‐Fullerene Conjugate

A new donor (D)–acceptor (A) conjugate, benzodithiophene‐rhodanine–[6,6]‐phenyl‐C₆₁ butyric acid methyl ester (BDTRh–PCBM) comprising three covalently linked blocks, one of p‐type oligothiophene containing BDTRh moieties and two of n‐type PCBM, is designed and synthesized. A single component organic solar cell (SCOSC) fabricated from BDTRh–PCBM exhibits the power conversion efficiency (PCE) of 2.44% and maximum external quantum efficiency of 46%, which are the highest among the reported efficiencies so far. The SCOSC device shows efficient charge transfer (CT, ≈300 fs) and smaller CT energy loss, resulting in the higher open‐circuit voltage of 0.97 V, compared to the binary blend (BDTRh:PCBM). Because of the integration of the donor and acceptor in a single molecule, BDTRh‐PCBM has a specific D–A arrangement with less energetic disorder and reorganization energy than blend systems. In addition, the SCOSC device shows excellent device and morphological stabilities, showing no degradation of PCE at 80 °C for 100 h. The SCOSC approach may suggest a great way to suppress the large phase segregation of donor and acceptor domains with better morphological stability compared to the blend device.     

Prolonged lifetime of polymer solar cells with amphiphilic monolayers modified cathodes

The short lifetime and low stability of polymer solar cells (PSCs) devices limit their feasibility for commercial use. Modification of the interfacial electron-transport layers (ETL) has been demonstrated as an effective way to enhance power conversion efficiency (PCE) and device stability. In this work, two types of monolayers consisting of amphiphilic molecules (sodium stearate or sodium oleate - a major constituent of “soap”) are introduced as novel ETLs in polymer: PCBM based PSCs. Significant improvement of PCE was demonstrated and an extended operational lifetime by 5–25 times was achieved. We attributed the improved performance to the interface modification by the amphiphilic molecular layers. The amphiphilic interfacial layers established a better contact between the active layer and the cathode by reducing the roughness and forming a compact dipole at the interface, which facilitates charge generation, charge transport to, and charge collection at the electrodes, thereby enhancing the device efficiency and stability. This versatile interface modification approach has shown to be an immediate and promising means to improve the performance of PSCs.     

Simultaneous Improvement of Charge Generation and Extraction in Colloidal Quantum Dot Photovoltaics Through Optical Management

Inverted structure heterojunction colloidal quantum dot (CQD) photovoltaic devices with an improved performance are developed using single‐step coated CQD active layers with a thickness of ≈60 nm. This improved performance is achieved by managing the device architecture to simultaneously enhance charge generation and extraction by raising optical absorption within the depletion region. The devices are composed of an ITO/PEDOT:PSS/PbS‐CQD/ZnO/Al structure, in which the p–n heterojunction is placed at the rear (i.e., opposite to the side of illumination) of the devices (denoted as R‐Cell). Sufficient optical generation is achieved at very low CQD layer thicknesses of 45–60 nm because of the constructive interference caused by the insertion of ZnO between the CQD and the Al electrode. The power conversion efficiency (PCE) of R‐Cells containing a thin CQD layers (≈60 nm) is much higher (≈6%) than that of conventional devices containing CQD layers with a thickness of ≈300 nm (PCE ≈4.5%). This optical management strategy provides a general guide to obtain the optimal trade‐off between generation and extraction in planar p–n junction solar cells. In terms of device engineering, all the layers in our R‐Cells are fabricated using single coating, which can lead to compatibility with high‐throughput processes.