Interfaces in Perovskite Solar Cells

The interfacial atomic and electronic structures, charge transfer processes, and interface engineering in perovskite solar cells are discussed in this review. An effective heterojunction is found to exist at the window/perovskite absorber interface, contributing to the relatively fast extraction of free electrons. Moreover, the high photovoltage in this cell can be attributed to slow interfacial charge recombination due to the outstanding material and interfacial electronic properties. However, some fundamental questions including the interfacial atomic and electronic structures and the interface stability need to be further clarified. Designing and engineering the interfaces are also important for the next‐stage development of this cell.     

钙钛矿太阳能电池的研究进展

钙钛矿太阳能电池自2009年被提出以来取得了迅速的发展,其性能已超过了多晶硅太阳能电池。目前,钙钛矿太阳能电池的光电转换效率已达到20.8%。但是它面临着稳定性差的问题,这严重阻碍了其商业化进程。本文将总结近年来钙钛矿太阳能电池取得的部分研究进展和存在的问题,讨论提高钙钛矿太阳能电池光电转换效率和稳定性的途径,并对未来发展的方向进行了展望。     

Reliable Measurement of Perovskite Solar Cells

Perovskite solar cells (PSCs) have undergone an incredibly fast development and attracted intense attention worldwide owing to their high efficiency and low‐cost fabrication. However, it is challenging to make a reliable measurement of PSCs, which creates great difficulty for researchers to compare and reproduce published results. Herein, the major measurement methods and key factors affecting evaluation of PSCs are summarized, such as hysteresis in current–voltage measurement, calibration of solar simulators for less mismatch in spectra and light intensity, and the area for the calculation of current density and power conversion efficiency. PSCs are also compared with n–i–p or p–i–n structures that exhibit different feedback under the same measurement methods. Finally, a measurement proposal is provided to help researchers obtain reliable measurement results close to those certified by public test centers.     

钙钛矿太阳能电池的研究进展

钙钛矿太阳能电池由纳米晶致密层、钙钛矿型光活性层CH₃NH₃PbX₃ (X= Cl、Br、I)、空穴传输层及对电极组成。其中光活性层吸光材料的种类及其成膜技术、空穴传输层材料类型及结构设计是影响钙钛矿太阳能电池光电性能的重要因素。本文结合钙钛矿太阳能电池近年来的最新研究进展, 对影响器件光电性能的关键因素: 光吸收层、空穴传输层、工艺参数以及结构设计等进行综述, 同时展望了钙钛矿太阳能电池未来的发展趋势。     

Ligand Engineering in Tin-Based Perovskite Solar Cells

Perovskite solar cells(PSCs) have attracted aggressive attention in the photovoltaic field in light of the rapid increasing power conversion efficiency. However, their large-scale application and commercialization are limited by the toxicity issue of lead(Pb). Among all the lead-free perovskites, tin(Sn)-based perovskites have shown potential due to their low toxicity, ideal bandgap structure, high carrier mobility, and long hot carrier lifetime. Great progress of Sn-based PSCs has been realized...     

钙钛矿太阳能电池的研究进展

作为一种新型清洁可再生能源,钙钛矿太阳能电池(Perovskite solar cells,PSC)从发展至今已取得了重大的突破,成为研究的热点。主要介绍了钙钛矿太阳能电池的基本结构和工作原理及电子传输层、钙钛矿层、空穴传输层的制备方法,以及在发展过程中所面临的技术问题,最后展望了钙钛矿太阳能电池未来的研究重点及发展前景。     

Quasi‐Heteroface Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted unprecedented attention due to their rapidly rising photoelectric conversion efficiency (PCE). In order to further improve the PCE of PSCs, new possible optimization path needs to be found. Here, quasi‐heteroface PSCs (QHF‐PSCs) is designed by a double‐layer perovskite film. Such brand new PSCs have good carrier separation capabilities, effectively suppress the nonradiative recombination of the PSCs, and thus greatly improve the open‐circuit voltage and PCE. The root cause of the performance improvement is the benefit from the additional built‐in electric field, which is confirmed by measuring the external quantum efficiency under applied electric field and Kelvin probe force microscope. Meanwhile, an intermediate band gap perovskite layer can be obtained simply by combining a wide band gap perovskite layer with a narrow band gap perovskite layer. Tunability of the band gap is obtained by varying the film thicknesses of the narrow and wide band gap layers. This phenomenon is quite different from traditional inorganic solar cells, whose band gap is determined only by the narrowest band gap layer. It is believed that these QHF‐PSCs will be an effective strategy to further enhance PCE in PSCs and provide basis to further understand and develop the perovskite materials platform.     

Stable and High-Efficiency Methylammonium-Free Perovskite Solar Cells

Organic–inorganic metal halide perovskite solar cells (PSCs) have achieved certified power conversion efficiency (PCE) of 25.2% with complex compositional and bandgap engineering. However, the thermal instability of methylammonium (MA) cation can cause the degradation of the perovskite film, remaining a risk for the long-term stability of the devices. Herein, a unique method is demonstrated to fabricate highly phase-stable perovskite film without MA by introducing cesium chloride (CsCl) in the double cation (Cs, formamidinium) perovskite precursor. Moreover, due to the suboptimal bandgap of bromide (Br⁻), the amount of Br⁻ is regulated, leading to high power conversion efficiency. As a result, MA-free perovskite solar cells achieve remarkable long-term stability and a PCE of 20.50%, which is one of the best results for MA-free PSCs. Moreover, the unencapsulated device retains about 80% of the original efficiencies after a 1000 h aging study. These results provide a feasible approach to enhance solar cell stability and performance simultaneously, paving the way for commercializing PSCs.     

Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

The recently emerged integrated perovskite/bulk-heterojunction (BHJ) organic solar cells (IPOSCs) without any recombination layers have generated wide attention. This type of device structure can take the advantages of tandem cells using both perovskite solar and near-infrared (NIR) BHJ organic solar materials for wide-range sunlight absorption and the simple fabrication of single junction cells, as the low bandgap BHJ layer can provide additional light harvesting in the NIR region and the high open-circuit voltage can be maintained at the same time. This progress report highlights the recent developments in such IPOSCs and the possible challenges ahead. In addition, the recent development of perovskite solar cells and NIR organic solar cells is also covered to fully underline the importance and potential of IPOSCs.     

Methodologies toward Highly Efficient Perovskite Solar Cells

A perovskite solar cell (PSC) employing an organic–inorganic lead halide perovskite light harvester, seeded in 2009 with power conversion efficiency (PCE) of 3.8% and grown in 2011 with PCE of 6.5% in dye‐sensitized solar cell structure, has received great attention since the breakthrough reports ≈10% efficient solid‐state PCSs demonstrating 500 h stability. Developments of device layout and high‐quality perovskite film eventually lead to a PCE over 22%. As of October 31, 2017, the highest PCE of 22.7% is listed in an efficiency chart provided by NREL. In this Review, the methodologies to obtain highly efficient PSCs are described in detail. In order to achieve a PCE of over 20% reproducibly, key technologies are disclosed from the viewpoint of precursor solution chemistry, processing for defect‐free perovskite films, and passivation of grain boundaries. Understanding chemical species in precursor solution, crystal growth kinetics, light–matter interaction, and controlling defects is expected to give important insights into not only reproducible production of high PCE over 20% but also further enhancement of the PCE of PCSs.     

柔性钙钛矿太阳能电池研究进展

近年来,柔性钙钛矿太阳能电池由于具有质量轻、成本低、形状可塑、适用性广等优点,成为了太阳能电池领域炙手可热的研究课题。目前,该类柔性电池的最高光电转换效率已超过16%。本文针对柔性钙钛矿太阳能电池的结构及其柔性衬底,介绍了其主要的研究方向和目前的研究进展,并探讨了柔性钙钛矿太阳能领域面临的主要问题与挑战,最后展望了柔性钙钛矿太阳能电池的发展。     

Perovskite Solar Cells: From Materials to Devices

Perovskite solar cells based on organometal halide light absorbers have been considered a promising photovoltaic technology due to their superb power conversion efficiency (PCE) along with very low material costs. Since the first report on a long‐term durable solid‐state perovskite solar cell with a PCE of 9.7% in 2012, a PCE as high as 19.3% was demonstrated in 2014, and a certified PCE of 17.9% was shown in 2014. Such a high photovoltaic performance is attributed to optically high absorption characteristics and balanced charge transport properties with long diffusion lengths. Nevertheless, there are lots of puzzles to unravel the basis for such high photovoltaic performances. The working principle of perovskite solar cells has not been well established by far, which is the most important thing for understanding perovksite solar cells. In this review, basic fundamentals of perovskite materials including opto‐electronic and dielectric properties are described to give a better understanding and insight into high‐performing perovskite solar cells. In addition, various fabrication techniques and device structures are described toward the further improvement of perovskite solar cells.     

Interfacial Modification in Organic and Perovskite Solar Cells

Organic bulk heterojunction solar cells (OSCs) and hybrid halide perovskite solar cells (PSCs) are two promising photovoltaic techniques for next‐generation energy conversion devices. The rapid increase in the power conversion efficiency (PCE) in OSCs and PSCs has profited from synergetic progresses in rational material synthesis for photoactive layers, device processing, and interface engineering. Interface properties in these two types of devices play a critical role in dictating the processes of charge extraction, surface trap passivation, and interfacial recombination. Therefore, there have been great efforts directed to improving the solar cell performance and device stability in terms of interface modification. Here, recent progress in interfacial doping with biopolymers and ionic salts to modulate the cathode interface properties in OSCs is reviewed. For the anode interface modification, recent strategies of improving the surface properties in widely used PEDOT:PSS for narrowband OSCs or replacing it by novel organic conjugated materials will be touched upon. Several recent approaches are also in focus to deal with interfacial traps and surface passivation in emerging PSCs. Finally, the current challenges and possible directions for the efforts toward further boosts of PCEs and stability via interface engineering are discussed.     

Defect and Contact Passivation for Perovskite Solar Cells

Metal‐halide perovskites are rapidly emerging as an important class of photovoltaic absorbers that may enable high‐performance solar cells at affordable cost. Thanks to the appealing optoelectronic properties of these materials, tremendous progress has been reported in the last few years in terms of power conversion efficiencies (PCE) of perovskite solar cells (PSCs), now with record values in excess of 24%. Nevertheless, the crystalline lattice of perovskites often includes defects, such as interstitials, vacancies, and impurities; at the grain boundaries and surfaces, dangling bonds can also be present, which all contribute to nonradiative recombination of photo‐carriers. On device level, such recombination undesirably inflates the open‐circuit voltage deficit, acting thus as a significant roadblock toward the theoretical efficiency limit of 30%. Herein, the focus is on the origin of the various voltage‐limiting mechanisms in PSCs, and possible mitigation strategies are discussed. Contact passivation schemes and the effect of such methods on the reduction of hysteresis are described. Furthermore, several strategies that demonstrate how passivating contacts can increase the stability of PSCs are elucidated. Finally, the remaining key challenges in contact design are prioritized and an outlook on how passivating contacts will contribute to further the progress toward market readiness of high‐efficiency PSCs is presented.     

全无机CsPbBr3钙钛矿太阳电池的研究进展

自2009年第一次报道以来,有机-无机杂化钙钛矿太阳电池(PSCs)的光电转换效率(PCE)从3.8％提升至25.5％,已可以与商业化的晶体硅太阳电池相媲美,引起全世界研究者的极大关注.然而,由于杂化物晶体结构中有机成分弱的化学键,器件长期稳定性受到很大的影响.近年来,用无机Cs+完全取代有机基团构成全无机卤化物钙钛矿被认为是解决太阳电池稳定性问题的有效途径.在Cs基钙钛矿之中,CsPbBr3具有最优异的耐热、耐光、耐湿性能,作为顶电池具有与晶体硅太阳电池组成长寿命叠层太阳电池的潜力.本文系统地综述了CsPbBr3 PSCs领域的研究进展,首先介绍了CsPbBr3 PSCs的发展历史及CsPbBr3的晶体结构和基本特性,随后阐述了CsPbBr3薄膜的制备方法、CsPbBr3的元素掺杂改性、器件的界面工程等方面的研究进展;最后,讨论了当前存在的问题和提高CsPbBr3 PSCs性能的未来方向,为进一步推动钙钛矿太阳电池的实用化进程提供参考.