Constructing CsPbBr3 Cluster Passivated‐Triple Cation Perovskite for Highly Efficient and Operationally Stable Solar Cells

Ion migration and phase segregation, in mixed‐cation/anion perovskite materials, raises a bottleneck for its stability improvement in solar cells operation. Here, the synergetic effect of electric field and illumination on the phase segregation of Cs_0.05FA_0.80MA_0.15Pb(I_0.85Br_0.15)₃ (CsFAMA) perovskite is demonstrated. CsFAMA perovskite with a CsPbBr₃‐clusters passivated structure is realized, in which CsPbBr₃‐clusters are located at the surface/interface of CsFAMA grains. This structure is realized by introducing a CsPbBr₃ colloidal solution into the CsFAMA precursor. It is found that CsPbBr₃ passivation greatly suppresses phase segregation in CsFAMA perovskite. The resultant passivated CsFAMA also exhibits a longer photoluminescence lifetime due to reduced defect state densities, produces highly efficient TiO₂‐based planar solar cells with 20.6% power conversion efficiency and 1.195 V open‐circuit voltage. The optimized devices do not suffer from a fast burn‐in degradation and retain 90% of their initial performance at maximum power under one‐sun illumination at 25 °C (65 °C) exceeding 500 h (100 h) of continuous operation. This result represents the most stable output among CsFAMA solar cells in a planar structure with Spiro‐OMeTAD.     

A Dual‐Retarded Reaction Processed Mixed‐Cation Perovskite Layer for High‐Efficiency Solar Cells

Mixed‐cation perovskite solar cells (PSCs) have become of enormous interest because of their excellent efficiency, which is now crossing 23.7%. Their broader absorption, relatively high stability with low fabrication cost compared to conventional single phase ABX₃ perovskites (where A: organic cation; B: divalent metal ion; and X: halide anion) are key properties of mixed‐halide mixed‐cation perovskites. However, the controlling reaction rate and formation of extremely dense, textured, smooth, and large grains of perovskite layer is a crucial task in order to achieve highly efficient PSCs. Herein, a new simple dual‐retarded reaction processing (DRP) method is developed to synthesize a high‐quality mixed‐cation (FAPbI₃)_0.85(MAPbBr₃)_0.15 (where MAPbBr₃ stands for methylammonium lead bromide and FAPbI₃ stands for formamidinium lead iodide) perovskite thin film via intermediate phase and incorporation of nitrogen‐doped reduced graphene oxide (N‐rGO). The reaction rate is retarded via two steps: first the formation of intermediate phase and second the interaction of the nitrogen groups on N‐rGO with hydrogen atoms from formamidinium cations. This DRP process allows for the fabrication of PSCs with maximum conversion efficiency higher than 20.3%.     

Water‐Soluble Triazolium Ionic‐Liquid‐Induced Surface Self‐Assembly to Enhance the Stability and Efficiency of Perovskite Solar Cells

Despite being a promising candidate for next‐generation photovoltaics, perovskite solar cells (PSCs) exhibit limited stability that hinders their practical application. In order to improve the humidity stability of PSCs, herein, a series of ionic liquids (ILs) “1‐alkyl‐4‐amino‐1,2,4‐triazolium” (termed as RATZ; R represents alkyl chain, and ATZ represents 4‐amino‐1,2,4‐triazolium) as cations are designed and used as additives in methylammonium lead iodide (MAPbI₃) perovskite precursor solution, obtaining triazolium ILs‐modified PSCs for the first time (termed as MA/RATZ PSCs). As opposed to from traditional methods that seek to improve the stability of PSCs by functionalizing perovskite film with hydrophobic molecules, humidity‐stable perovskite films are prepared by exploiting the self‐assembled monolayer (SAM) formation of water‐soluble triazolium ILs on a hydrophilic perovskite surface. The mechanism is validated by experimental and theoretical calculation. This strategy means that the MA/RATZ devices exhibit good humidity stability, maintaining around 80% initial efficiency for 3500 h under 40 ± 5% relative humidity. Meanwhile, the MA/RATZ PSCs exhibit enhanced thermal stability and photostability. Tuning the molecule structure of the ILs additives achieves a maximum power conversion efficiency (PCE) of 20.03%. This work demonstrates the potential of using triazolium ILs as additives and SAM and molecular design to achieve high performance PSCs.     

Low temperature fabrication of formamidinium based perovskite solar cells with enhanced performance by chlorine incorporation

Recently formamidinium (FA) based perovskite solar cell was demonstrated to show high performance and better stability upon partial substitution of FA with Cs cation. However, the fabrication of device required high-temperature processing on TiO₂ electrode and thus limits the use of flexible polymeric substrates. Here, we present a low temperature approach for the fabrication of p-i-n perovskite solar cells based on Cs_0.15FA_0.85PbI₃. Furthermore, we investigated the effects of chlorine on the morphology and crystallinity of the perovskite films and the corresponding photovoltaic performance. Chlorine incorporation can significantly enlarge the size of grains and improve the crystallinity of perovskite films with full surface coverage. A best power conversion efficiency of 14.5% was realized for planar perovskite solar cells with negligible hysteresis and remarkable reproducibility.     

δ‐CsPbI3 Intermediate Phase Growth Assisted Sequential Deposition Boosts Stable and High‐Efficiency Triple Cation Perovskite Solar Cells

Cs/FA/MA triple cation perovskite films have been well developed in the antisolvent dripping method, attributable to its outstanding photovoltaic and stability performances. However, a facile and effective strategy is still lacking for fabricating high‐quality large‐grain triple cation perovskite films via sequential deposition method a, which is one of the key technologies for high efficiency perovskite solar cells. To address this issue, a δ‐CsPbI₃ intermediate phase growth (CsPbI₃‐IPG) assisted sequential deposition method is demonstrated for the first time. The approach not only achieves incorporation of controllable cesium into (FAPbI₃)_1–x(MAPbBr₃)_x perovskite, but also enlarges the perovskite grains, manipulates the crystallization, modulates the bandgap, and improves the stability of final perovskite films. The photovoltaic performances of the devices based on these Cs/FA/MA perovskite films with various amounts of the δ‐CsPbI₃ intermediate phase are investigated systematically. Benefiting from moderate cesium incorporation and intermediate phase‐assisted grain growth, the optimized Cs/FA/MA perovskite solar cells exhibit a significantly improved power conversion efficiency and operational stability of unencapsulated devices. This facile strategy provides new insights into the compositional engineering of triple or quadruple cation perovskite materials with enlarged grains and superior stability via a sequential deposition method.     

An Interdiffusion Method for Highly Performing Cesium/Formamidinium Double Cation Perovskites

The fabrication of high‐quality cesium (Cs)/formamidinium (FA) double‐cation perovskite films through a two‐step interdiffusion method is reported. Cs_x FA_1‐x PbI_{3‐y(1‐x )}Br_{y(1‐x )} films with different compositions are achieved by controlling the amount of CsI and formamidinium bromide (FABr) in the respective precursor solutions. The effects of incorporating Cs⁺ and Br^? on the properties of the resulting perovskite films and on the performance of the corresponding perovskite solar cells are systematically studied. Small area perovskite solar cells with a power conversion efficiency (PCE) of 19.3% and a perovskite module (4 cm²) with an aperture PCE of 16.4%, using the Cs/FA double cation perovskite made with 10 mol% CsI and 15 mol% FABr (Cs_0.1FA_0.9PbI_2.865Br_0.135) are achieved. The Cs/FA double cation perovskites show negligible degradation after annealing at 85 °C for 336 h, outperforming the perovskite materials containing methylammonium (MA).     

FAPbI3‐Based Perovskite Solar Cells Employing Hexyl‐Based Ionic Liquid with an Efficiency Over 20% and Excellent Long‐Term Stability

Formamidinium lead triiodide (FAPbI₃)‐based perovskite materials are of interest for photovoltaics in view of their close‐to‐ideal bandgap, allowing absorption of photons over a broad solar spectrum. However, FAPbI₃‐based materials suffer from a notorious phase transition from the photoactive black phase (α‐FAPbI₃) to nonperovskite yellow phase (δ‐FAPbI₃) under ambient conditions. This transition dramatically reduces light absorbtion, thus, degrading the photovoltaic performance and stability of ensuring solar cells. In this study, 1‐hexyl‐3‐methylimidazolium iodide (HMII) ionic liquid (IL) is employed as an additive for the first time in FAPbI₃ perovskite to overcome the above‐mentioned issues. HMII incorporation facilitates the grain coarsening of FAPbI₃ crystal owing to its high‐polarity and high‐boiling point, which yields liquid domains between neighboring grains to reduce the activation energy of the grain‐boundary migration. As a result, the FAPbI₃ active layer exhibits micron‐sized grains with substantially suppressed parasitic traps with an Urbach energy reduced by 2 meV. Hence, the resulting perovskite solar cell achieves an efficiency of 20.6% with notable increase in open circuit voltage (V_OC) of 80 mV compared with HMII‐free cells (17.1%). More importantly, the HMII‐doped FAPbI₃‐based cells show a striking enhancement in shelf‐stability under high humidity and thermal stress, retaining >80% of their initial efficiencies at 60 ± 10% relative humidity and ≈95% at 65 °C.     

Octadecylamine‐Functionalized Single‐Walled Carbon Nanotubes for Facilitating the Formation of a Monolithic Perovskite Layer and Stable Solar Cells

Organic–inorganic lead halide perovskites have shown great future for application in solar cells owing to their exceptional optical and electronic properties. To achieve high‐performance perovskite solar cells, a perovskite light absorbing layer with large grains is desirable in order to minimize grain boundaries and recombination during the operation of the device. Herein, a simple yet efficient approach is developed to synthesize perovskite films consisting of monolithic‐like grains with micrometer size through in situ deposition of octadecylamine functionalized single‐walled carbon nanotubes (ODA‐SWCNTs) onto the surface of the perovskite layer. The ODA‐SWCNTs form a capping layer that controls the evaporation rate of organic solvents in the perovskite film during the postthermal treatment. This favorable morphology in turn dramatically enhances the short‐circuit current density of the perovskite solar cells and almost completely eliminates the hysteresis. A maximum power conversion efficiency of 16.1% is achieved with an ODA‐SWCNT incorporated planar solar cell using (FA_0.83MA_0.17)_0.95Cs_0.05Pb(I_0.83Br_0.17)₃ as light absorber. Furthermore, the perovskite solar cells with ODA‐SWCNT demonstrate extraordinary stability with performance retention of 80% after 45 d stability testing under high humidity (60–90%) environment. This work opens up a new avenue for morphology manipulation of perovskite films and enhances the device stability using carbon material.     

Inorganic Rubidium Cation as an Enhancer for Photovoltaic Performance and Moisture Stability of HC(NH2)2PbI3 Perovskite Solar Cells

Perovskite solar cells (PSCs) based on organic monovalent cation (methylammonium or formamidinium) have shown excellent optoelectronic properties with high efficiencies above 22%, threatening the status of silicon solar cells. However, critical issues of long‐term stability have to be solved for commercialization. The severe weakness of the state‐of‐the‐art PSCs against moisture originates mainly from the hygroscopic organic cations. Here, rubidium (Rb) is suggested as a promising candidate for an inorganic–organic mixed cation system to enhance moisture‐tolerance and photovoltaic performances of formamidinium lead iodide (FAPbI₃). Partial incorporation of Rb in FAPbI₃ tunes the tolerance factor and stabilizes the photoactive perovskite structure. Phase conversion from hexagonal yellow FAPbI₃ to trigonal black FAPbI₃ becomes favored when Rb is introduced. The authors find that the absorbance and fluorescence lifetime of 5% Rb‐incorporated FAPbI₃ (Rb_0.05FA_0.95PbI₃) are enhanced than bare FAPbI₃. Rb_0.05FA_0.95PbI₃‐based PSCs exhibit a best power conversion efficiency of 17.16%, which is much higher than that of the FAPbI₃ device (13.56%). Moreover, it is demonstrated that the Rb_0.05FA_0.95PbI₃ film shows superior stability against high humidity (85%) and the full device made with the mixed perovskite exhibits remarkable long‐term stability under ambient condition without encapsulation, retaining the high performance for 1000 h.     

NbF5: A Novel α‐Phase Stabilizer for FA‐Based Perovskite Solar Cells with High Efficiency

The HC(NH₂)₂⁺(FA⁺) is a well‐known substitute to CH₃NH₃⁺(MA⁺) for its capability to extend light utilization for improved power conversion efficiency for perovskite solar cells; unfortunately, the dark cubic phase (α‐phase) can easily transition to the yellow orthorhombic phase (δ‐phase) at room temperature, an issue that prevents its commercial application. In this report, an inorganic material (NbF₅) is developed to stabilize the desired α‐phase perovskite material by incorporating NbF₅ additive into the perovskite films. It is found that the NbF₅ additive effectively suppresses the formation of the yellow δ‐phase in the perovskite synthesis and aging process, thus enhancing the humidity and light‐soaking stability of the perovskite film. As a result, the perovskite solar cells with the NbF₅ additive exhibit improved air stability by tenfold, retaining nearly 80% of their initial efficiency after aging in air for 50 d. In addition, under full‐sun AM 1.5 G illumination of a xenon lamp without any UV‐reduction, the perovskite solar cells with the NbF₅ additive also show fivefold improved illumination stability than the control devices without NbF₅.     

A Thienothiophene-Based Cation Treatment Allows Semitransparent Perovskite Solar Cells with Improved Efficiency and Stability

Perovskite surface treatment with additives has been reported to improve charge extraction, stability, and/or surface passivation. In this study, treatment of a 3D perovskite ((FAPbI₃)_1−x(MAPbBr₃)_x) layer with a thienothiophene-based organic cation (TTMAI), synthesized in this work, is investigated. Detailed analyses reveal that a 2D (n = 1) or quasi-2D layer does not form on the PbI₂-rich surface 3D perovskite. TTMAI-treated 3D perovskite solar cells (PSCs) fabricated in this study show improved fill factors, providing an increase in their power conversion efficiencies (PCEs) from 17% to over 20%. It is demonstrated that the enhancement is due to better hole extraction by drift-diffusion simulations. Furthermore, thanks to the hydrophobic nature of the TTMAI, PSC maintains 82% of its initial PCE under 15% humidity for over 380 h (the reference retains 38%). Additionally, semitransparent cells are demonstrated reaching 17.9% PCE with treated 3D perovskite, which is one of the highest reported efficiencies for double cationic 3D perovskites. Moreover, the semitransparent 3D PSC (TTMAI-treated) maintains 87% of its initial efficiency for six weeks (>1000 h) when kept in the dark at room temperature. These results clearly show that this study fills a critical void in perovskite research where highly efficient and stable semitransparent perovskite solar cells are scarce.     

Heteroatom Effect on Star‐Shaped Hole‐Transporting Materials for Perovskite Solar Cells

Three new star‐shaped hole‐transporting materials (HTMs) incorporating benzotripyrrole, benzotrifuran, and benzotriselenophene central cores endowed with three‐armed triphenylamine moieties ( BTP‐1 , BTF‐1 , and BTSe‐1 , respectively) are designed, synthesized, and implemented in perovskite solar cells (PSCs). The impact that the heteroatom‐containing central scaffold has on the electrochemical and photophysical properties, as well as on the photovoltaic performance, is systematically investigated and compared with their sulfur‐rich analogue ( BTT‐3 ). The new HTMs exhibit suitable highest‐occupied molecular orbitals (HOMO) levels regarding the valence band of the perovskite, which ensure efficient hole extraction at the perovskite/HTM interface. The molecular structures of BTF‐1 , BTT‐3 , and BTSe‐1 are fully elucidated by single‐crystal X‐ray crystallography as toluene solvates. The optimized (FAPbI₃)_0.85(MAPbBr₃)_0.15‐based perovskite solar cells employing the tailor‐made, chalcogenide‐based HTMs exhibit remarkable power conversion efficiencies up to 18.5%, which are comparable to the devices based on the benchmark spiro‐OMeTAD. PSCs with BTP‐1 exhibit a more limited power conversion efficiency of 15.5%, with noticeable hysteresis. This systematic study indicates that chalcogenide‐based derivatives are promising HTM candidates to compete efficiently with spiro‐OMeTAD.     

Introduction of Hydrophobic Ammonium Salts with Halogen Functional Groups for High‐Efficiency and Stable 2D/3D Perovskite Solar Cells

2D perovskites have attracted extensive attention due to their excellent stability compared with 3D perovskites. However, the intrinsic hydrophilicity of introduced alkylammonium salts effects the humidity stability of 2D/3D perovskites. Devices based on longer chain alkylammonium salts show improvement in hydrophobicity but lower efficiency due to the poorer charge transport among various layers. To solve this issue, two hydrophobic short‐chain alkylammonium salts with halogen functional groups (2‐chloroethylamine, CEA⁺ and 2‐bromoethylamine, BEA⁺) are introduced into (Cs_0.1FA_0.9)Pb(I_0.9Br_0.1)₃ 3D perovskites to form 2D/3D perovskite structure, which achieve high‐quality perovskite films with better crystallization and morphology. The optimal 2D/3D perovskite solar cells (PSCs) with 5% CEA⁺ display a power conversion efficiency (PCE) as high as 20.08% under 1 sun irradiation. Because of the notable hydrophobicity of alkylammonium cations with halogen functional groups and the formed 2D/3D perovskite structure, the optimal PSCs exhibit superior moisture resistance and retain 92% initial PCE after aging at 50 ± 5% relative humidity for 2400 h. This work opens up a new direction for the design of new‐type 2D/3D PSCs with improved performance by employing proper alkylammonium salts with different functional groups.     

Stable Triple Cation Perovskite Precursor for Highly Efficient Perovskite Solar Cells Enabled by Interaction with 18C6 Stabilizer

Triple cation perovskites (Cs_0.05(MA_0.17FA_0.83)_0.95Pb(I_0.83Br_0.17)₃) have received lots of attention owing to the excellent stability and photovoltaic performance. However, the development toward efficient solar cells has been significantly impeded by its intrinsic precursor instability, as well as defective crystal surface. Herein, a strategy for introducing the additive of 1,4,7,10,13,16‐hexaoxacyclooctadecane (18C6) in the precursor solution, rendering an excellent stability of more than one month, and the defect passivation effect on the crystal surface are demonstrated. In those perovskite solar cells, a power conversion efficiency of 20.73% has been achieved with a substantially improved open‐circuit voltage and fill factor. As evidenced by the density functional theory calculations, the fundamental reason relating to the enhanced performance is found to be the interaction effect between the 18C6 and cations, and in particular the formation of the 18C6/Pb complex. This finding represents an alternative strategy for achieving a stable precursor solution and efficient perovskite solar cells.     

Precursor Solution Annealing Forms Cubic‐Phase Perovskite and Improves Humidity Resistance of Solar Cells

Solar cells with light‐absorbing layers comprising organometal halide perovskites have recently exceeded 22% efficiency. Despite high power‐conversion efficiencies, the stability of these devices, particularly when exposed to humidity and oxygen, remains poor. In the current study, a pathway to increase the stability of methylammonium lead iodide (CH₃NH₃PbI₃) based solar cells towards humidity is demonstrated, while maintaining the simplicity and solution‐processability of the active layers. Thermal annealing of the precursor solution prior to deposition induces the formation of cubic‐phase perovskite films in the solid state at room temperature. The experiments demonstrate that this improved ambient stability is correlated with the presence of the cubic phase at device operating temperatures, with the cubic phase resisting the formation of perovskite monohydrate—a pathway of degradation in conventionally processed perovskite thin films—on exposure to humidity.     

Construction of Polyoxometalate-Based Material for Eliminating Multiple Pb-Based Defects and Enhancing Thermal Stability of Perovskite Solar Cells

The high-quality perovskite film with few defects plays an important role in the power conversion efficiency (PCE) and long-term stability of perovskite solar cells. Here, an efficient strategy is proposed to eliminate Pb⁰ and passivate Pb²⁺ simultaneously by employing a stable polyoxometalate-based material CoW₁₂@MIL-101(Cr) in the precursor solution of perovskite. The controllable oxidation ability of CoW₁₂ is optimized through the interaction with metal–organic frameworks, resulting in a doped perovskite film with regular morphology, large grain size, and low defects density. The solvent effects and formation of intermediate materials in the precursor solution are further investigated by an in situ thermogravimetry-Fourier transform infrared spectroscopy analysis. In addition, the champion doped-device showed enhanced PCE to 21.39% and excellent stability, maintaining 85% and 89% of the original PCE after heating at 85 °C in N₂ atmosphere and stored in ambient conditions (25 °C, 40% humidity) for 1000 h, respectively.     

A Self‐Powered and Stable All‐Perovskite Photodetector–Solar Cell Nanosystem

Hybrid organic–inorganic perovskites have attracted intensive interest as light absorbing materials in solid‐state solar cells. Herein, we demonstrate a high‐performance CH₃NH₃PbI₃‐based perovskite photodetector constructed on the flexible indium tin oxide (ITO) coated substrate even after 200 bending cycles. The as‐fabricated devices show high responsivity, broad spectrum response from ultraviolet to whole visible light, long‐term stability, and high on‐off ratio. Particularly, atomic layer deposition technique was used to deposit the ultrathin Al₂O₃ film on devices, functioning as a protection layer to effectively enhance the stability and durability of perovskite photodetectors. The first all‐perovskite self‐powered nanosystem was successfully assembled by integrating a perovskite solar cell with a perovskite photodetector. Driven by the perovskite solar cell, the photodetector exhibits fast and stable response to illuminated light at a low working voltage less than 1.0 V. This stable integrated nanosystem has promising applications in which photodetectors can work in harsh environments without external power sources.     

Retarding Thermal Degradation in Hybrid Perovskites by Ionic Liquid Additives

Recent years have witnessed considerable progress in the development of solar cells based on lead halide perovskite materials. However, their intrinsic instability remains a limitation. In this context, the interplay between the thermal degradation and the hydrophobicity of perovskite materials is investigated. To this end, the salt 1‐(4‐ethenylbenzyl)‐3‐(3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctylimidazolium iodide (ETI), is employed as an additive in hybrid perovskites, endowing the photoactive materials with high thermal stability and hydrophobicity. The ETI additive inhibits methylammonium (MA) permeation in methylammonium lead triiodide (MAPbI₃) occurring due to intrinsic thermal degradation, by inhibiting out‐diffusion of the MA⁺ cation, preserving the pristine material and preventing decomposition. With this simple approach, high efficiency solar cells based on the unstable MAPbI₃ perovskite are markedly stabilized under maximum power point tracking, leading to greater than twice the preserved efficiency after 700 h of continuous light illumination and heating (60 °C). These results suggest a strategy to tackle the intrinsic thermal decomposition of MAI, an essential component in all state‐of‐the‐art perovskite compositions.     

Enhanced Incorporation of Guanidinium in Formamidinium‐Based Perovskites for Efficient and Stable Photovoltaics: The Role of Cs and Br

Recently, incorporating guanidium (GA) cations into organolead halide perovskites is shown to effectively improve the stability and performance of the solar cells. However, the underlying mechanisms that govern the GA incorporation have remained unclear. Here, FAPbI₃ is used as a basic framework to investigate experimentally and theoretically the role of cesium (Cs) and bromine (Br) substitutions in GA⁺ incorporation. It is found that simultaneous introduction of the small‐size Cs⁺ and Br^– in the FAPbI₃ lattice is critical to create sufficient space for the large GA⁺ and that the presence of the Cs⁺ prevents the formation of a GA‐contained low‐dimensional phase, which both assist GA⁺ incorporation. Upon entering the perovskite lattice, the GA⁺ can stabilize the lattice structure via forming strong hydrogen bonds with their neighboring halide ions. Such structure modification suppresses halide vacancy formation, thus leading to improved material properties. Compared to the GA‐free perovskite reference samples, the optimal system GA_0.05Cs_0.15FA_0.8Pb(I_0.85Br_0.15)₃ exhibits substantially improved thermal and photothermal stability, as well as increased photocarrier lifetime. Solar cells fabricated with the optimal material system show an excellent photovoltaic performance, with the champion device reaching a power conversion efficiency of 21.3% and an open circuit voltage of 1.229 V.     

2D/3D Heterostructure for Semitransparent Perovskite Solar Cells with Engineered Bandgap Enables Efficiencies Exceeding 25% in Four‐Terminal Tandems with Silicon and CIGS

Wide‐bandgap perovskite solar cells (PSCs) with optimal bandgap (E_g) and high power conversion efficiency (PCE) are key to high‐performance perovskite‐based tandem photovoltaics. A 2D/3D perovskite heterostructure passivation is employed for double‐cation wide‐bandgap PSCs with engineered bandgap (1.65 eV ≤ E_g ≤ 1.85 eV), which results in improved stabilized PCEs and a strong enhancement in open‐circuit voltages of around 45 mV compared to reference devices for all investigated bandgaps. Making use of this strategy, semitransparent PSCs with engineered bandgap are developed, which show stabilized PCEs of up to 25.7% and 25.0% in four‐terminal perovskite/c‐Si and perovskite/CIGS tandem solar cells, respectively. Moreover, comparable tandem PCEs are observed for a broad range of perovskite bandgaps. For the first time, the robustness of the four‐terminal tandem configuration with respect to variations in the perovskite bandgap for two state‐of‐the‐art bottom solar cells is experimentally validated.