Combustion Synthesized Zinc Oxide Electron‐Transport Layers for Efficient and Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have advanced rapidly with power conversion efficiencies (PCEs) now exceeding 22%. Due to the long diffusion lengths of charge carriers in the photoactive layer, a PSC device architecture comprising an electron‐ transporting layer (ETL) is essential to optimize charge flow and collection for maximum performance. Here, a novel approach is reported to low temperature, solution‐processed ZnO ETLs for PSCs using combustion synthesis. Due to the intrinsic passivation effects, high crystallinity, matched energy levels, ideal surface topography, and good chemical compatibility with the perovskite layer, this combustion‐derived ZnO enables PCEs approaching 17–20% for three types of perovskite materials systems with no need for ETL doping or surface functionalization.     

Controllable Perovskite Crystallization by Water Additive for High‐Performance Solar Cells

A key issue for perovskite solar cells is the stability of perovskite materials due to moisture effects under ambient conditions, although their efficiency is improved constantly. Herein, an improved CH₃NH₃PbI_3?xCl_x perovskite quality is demonstrated with good crystallization and stability by using water as an additive during crystal perovskite growth. Incorporating suitable water additives in N,N‐dimethylformamide (DMF) leads to controllable growth of perovskites due to the lower boiling point and the higher vapor pressure of water compared with DMF. In addition, CH₃NH₃PbI_3?xCl_x · nH₂O hydrated perovskites, which can be resistant to the corrosion by water molecules to some extent, are assumed to be generated during the annealing process. Accordingly, water additive based perovskite solar cells present a high power conversion efficiency of 16.06% and improved cell stability under ambient conditions compared with the references. The findings in this work provide a route to control the growth of crystal perovskites and a clue to improve the stability of organic–inorganic halide perovskites.     

Discrete Iron(III) Oxide Nanoislands for Efficient and Photostable Perovskite Solar Cells

Perovskite solar cells typically use TiO₂ as charge extracting materials, which reduce the photostability of perovskite solar cells under illumination (including ultraviolet light). Simultaneously realizing the high efficiency and photostability, it is demonstrated that the rationally designed iron(III) oxide nanoisland electrodes consisting of discrete nanoislands in situ growth on the compact underlayer can be used as compatible and excellent electron extraction materials for perovskite solar cells. The uniquely designed iron(III) oxide electron extraction layer satisfies the good light transmittance and sufficient electron extraction ability, resulting in a promising power conversion efficiency of 18.2%. Most importantly, perovskite solar cells fabricated with iron(III) oxide show a significantly improved UV light and long‐term operation stabilities compared with the widely used TiO₂‐based electron extraction material, owing to the low photocatalytic activity of iron(III) oxide. This study highlights the potential of incorporating new charge extraction materials in achieving photostable and high efficiency perovskite photovoltaic devices.     

An Ultrathin Ferroelectric Perovskite Oxide Layer for High‐Performance Hole Transport Material Free Carbon Based Halide Perovskite Solar Cells

The hole transport material (HTM) free carbon based perovskite solar cells (C‐PSCs) are promising for its manufactural simplicity, but they currently suffer from low power conversion efficiencies (PCE) largely because of the voltage loss. Here, a new strategy to increase the PCE by incorporating an ultrathin ferroelectric oxide PbTiO₃ layer between the electron transport material and the halide perovskite is reported. The resulting C‐PSCs have achieved PCEs up to 16.37%, which is the highest record for HTM‐free C‐PSCs to date, mainly ascribable to the ferroelectric layer enhanced open circuit voltage. Detail measurements and analysis show an enhanced built‐in potential in the C‐PSCs as well as suppression of the non‐radiative recombination due to the ferroelectric PbTiO₃ layer incorporation, accounting for the boosted V_OC and photovoltaic performance.     

π‐Extended Spiro Core‐Based Nonfullerene Electron‐Transporting Material for High‐Performance Perovskite Solar Cells

Electron transport materials (ETMs) play a significant role in perovskite solar cells (PSCs). However, conventional solution processable organic ETMs are mainly restricted to fullerene derivatives and it is challenging to obtain nonfullerene ETMs with satisfactory properties. In this work, a new organic semiconductor SPS‐4F is synthesized by utilizing the classical spiro[fluorine‐9′9‐thioxanthene] unit to construct a π‐extended core. Although spiro is normally used in hole transport materials, the new spiro derivative SPS‐4F is successfully used as an ETM in inverted PSCs with power conversion efficiency over 20%. In addition, SPS‐4F can strongly coordinate with MAPbI₃ perovskite and lead to efficient surface trap passivation. The resultant PSCs exhibit excellent stability in air because of the hydrophobic property of SPS‐4F. This work opens up opportunities to obtain a new family of ETMs based on spiro and paves a way to the fabrication of high‐performance PSCs with low cost.     

Passivated Perovskite Crystallization via g‐C3N4 for High‐Performance Solar Cells

Organometallic halide perovskite films with good surface morphology and large grain size are desirable for obtaining high‐performance photovoltaic devices. However, defects and related trap sites are generated inevitably at grain boundaries and on surfaces of solution‐processed polycrystalline perovskite films. Seeking facial and efficient methods to passivate the perovskite film for minimizing defect density is necessary for further improving the photovoltaic performance. Here, a convenient strategy is developed to improve perovskite crystallization by incorporating a 2D polymeric material of graphitic carbon nitride (g‐C₃N₄) into the perovskite layer. The addition of g‐C₃N₄ results in improved crystalline quality of perovskite film with large grain size by retarding the crystallization rate, and reduced intrinsic defect density by passivating charge recombination centers around the grain boundaries. In addition, g‐C₃N₄ doping increases the film conductivity of perovskite layer, which is beneficial for charge transport in perovskite light‐absorption layer. Consequently, a champion device with a maximum power conversion efficiency of 19.49% is approached owing to a remarkable improvement in fill factor from 0.65 to 0.74. This finding demonstrates a simple method to passivate the perovskite film by controlling the crystallization and reducing the defect density.     

Tuning Hole Transport Layer Using Urea for High‐Performance Perovskite Solar Cells

Interface engineering is critical to the development of highly efficient perovskite solar cells. Here, urea treatment of hole transport layer (e.g., poly(3,4‐ethylene dioxythiophene):polystyrene sulfonate (PEDOT:PSS)) is reported to effectively tune its morphology, conductivity, and work function for improving the efficiency and stability of inverted MAPbI₃ perovskite solar cells (PSCs). This treatment has significantly increased MAPbI₃ photovoltaic performance to 18.8% for the urea treated PEDOT:PSS PSCs from 14.4% for pristine PEDOT:PSS devices. The use of urea controls phase separation between PEDOT and PSS segments, leading to the formation of a unique fiber‐shaped PEDOT:PSS film morphology with well‐organized charge transport pathways for improved conductivity from 0.2 S cm^?1 for pristine PEDOT:PSS to 12.75 S cm^?1 for 5 wt% urea treated PEDOT:PSS. The urea‐treatment also addresses a general challenge associated with the acidic nature of PEDOT:PSS, leading to a much improved ambient stability of PSCs. In addition, the device hysteresis is significantly minimized by optimizing the urea content in the treatment.     

Polyfluorene Derivatives are High‐Performance Organic Hole‐Transporting Materials for Inorganic−Organic Hybrid Perovskite Solar Cells

Photovoltaics based on organic?inorganic perovskites offer new promise to address the contemporary energy and environmental issues. These solar cells have so far largely relied on small‐molecule hole transport materials such as spiro‐OMeTAD, which commonly suffer from high cost and low mobility. In principle, polyfluorene copolymers can be an ideal alternative to spiro‐OMeTAD, given their low price, high hole mobility and good processability, but this potential has not been explored. Herein, polyfluorene derived polymers‐TFB and PFB, which contain fluorine and arylamine groups, are demonstrated and can indeed rival or even outperform spiro‐OMeTAD as efficient hole‐conducting materials for perovskite solar cells. In particular, under the one‐step perovskite deposition condition, TFB achieves a 10.92% power conversion efficiency that is considerably higher than that with spiro‐OMeTAD (9.78%), while using the two‐step perovskite deposition method, about 13% efficient solar cells with TFB (12.80%) and spiro‐OMeTAD (13.58%) are delivered. Photo­luminescence reveals the efficient hole extraction and diffusion at the interface between CH₃NH₃PbI₃ and the hole conducting polymer. Impedance spectroscopy uncovers the higher electrical conductivity and lower series resistance than spiro‐OMeTAD, accounting for the significantly higher fill factor, photocurrent and open‐circuit voltage of the TFB‐derived cells than with spiro‐MeOTAD.     

Carbon Nanotube Based Inverted Flexible Perovskite Solar Cells with All‐Inorganic Charge Contacts

Organolead halide perovskite solar cells (PSC) are arising as promising candidates for next‐generation renewable energy conversion devices. Currently, inverted PSCs typically employ expensive organic semiconductor as electron transport material and thermally deposited metal as cathode (such as Ag, Au, or Al), which are incompatible with their large‐scale production. Moreover, the use of metal cathode also limits the long‐term device stability under normal operation conditions. Herein, a novel inverted PSC employs a SnO₂‐coated carbon nanotube (SnO₂@CSCNT) film as cathode in both rigid and flexible substrates (substrate/NiO‐perovskite/Al₂O₃‐perovskite/SnO₂@CSCNT‐perovskite). Inverted PSCs with SnO₂@CSCNT cathode exhibit considerable enhancement in photovoltaic performance in comparison with the devices without SnO₂ coating owing to the significantly reduced charge recombination. As a result, a power conversion efficiency of 14.3% can be obtained on rigid substrates while the flexible ones achieve 10.5% efficiency. More importantly, SnO₂@CSCNT‐based inverted PSCs exhibit significantly improved stability compared to the standard inverted devices made with silver cathode, retaining over 88% of their original efficiencies after 550 h of full light soaking or thermal stress. The results indicate that SnO₂@CSCNT is a promising cathode material for long‐term device operation and pave the way toward realistic commercialization of flexible PSCs.     

All‐Carbon‐Electrode‐Based Endurable Flexible Perovskite Solar Cells

Endured, low‐cost, and high‐performance flexible perovskite solar cells (PSCs) featuring lightweight and mechanical flexibility have attracted tremendous attention for portable power source applications. However, flexible PSCs typically use expensive and fragile indium–tin oxide as transparent anode and high‐vacuum processed noble metal as cathode, resulting in dramatic performance degradation after continuous bending or thermal stress. Here, all‐carbon‐electrode‐based flexible PSCs are fabricated employing graphene as transparent anode and carbon nanotubes as cathode. All‐carbon‐electrode‐based flexible devices with and without spiro‐OMeTAD (2,2′,7,7′‐tetrakis‐(N,N‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene) hole conductor achieve power conversion efficiencies (PCEs) of 11.9% and 8.4%, respectively. The flexible carbon‐electrode‐based solar cells demonstrate superior robustness against mechanical deformation in comparison with their counterparts fabricated on flexible indium–tin oxide substrates. Moreover, all carbon‐electrode‐based flexible PSCs also show significantly enhanced stability compared to the flexible devices with gold and silver cathodes under continuous light soaking or 60 °C thermal stress in air, retaining over 90% of their original PCEs after 1000 h. The promising durability and stability highlight that flexible PSCs are fully compatible with carbon materials and pave the way toward the realization of rollable and low‐cost flexible perovskite photovoltaic devices.     

Dopant‐Free Spiro‐Triphenylamine/Fluorene as Hole‐Transporting Material for Perovskite Solar Cells with Enhanced Efficiency and Stability

Chemical doping is often used to enhance electric conductivity of the conjugated molecule as hole‐transporting material (HTM) for the application in optoelectronics. However, chemical dopants can promote ion migration at the electrical field, which deteriorates the device efficiency as well as increases the fabrication cost. Here, two star HTMs, namely 2,2′,7,7′‐tetrakis(N,N‐di‐p‐methoxyphenyl‐amine) 9,9′‐spirobifluorene (Spiro‐OMeTAD) and poly(triarylamine) are subjeted to chemical combination to yield dopant‐free N2,N2,N2′,N2′,N7,N7,N7′,N7′‐octakis(4‐methoxyphenyl)‐10‐phenyl‐10H‐spiro[acridine‐9,9′‐fluorene]‐2,2′,7,7′‐tetraamine (SAF‐OMe). The power conversion efficiencies (PCEs) of 12.39% achieved by solar cells based on pristine, dopant‐free SAF‐OMe are among the highest reported for perovskite solar cells and are even comparable to devices based on chemically doped Spiro‐OMeTAD (14.84%). Moreover, using a HTM comprised of SAF‐OMe with an additional dopant results in a record PCE of 16.73%. Compared to Spiro‐OMeTAD‐based devices, SAF‐OMe significantly improves stability.     

Towards Simplifying the Device Structure of High‐Performance Perovskite Solar Cells

Perovskite solar cells (PSCs) are considered one of the most promising next‐generation examples of high‐tech photovoltaic energy converters, as they possess an unprecedented power conversion efficiency with low cost. A typical high‐performance PSC generally contains a perovskite active layer sandwiched between an electron‐transport layer (ETL) and a hole‐transport layer (HTL). The ETL and HTL contribute to the charge extraction in the PSC. However, these additional two layers complicate the manufacturing process and raise the cost. To extend this technology for commercialization, it is highly desired that the structure of PSCs is further simplified without sacrificing their photovoltaic performances. Thus, ETL‐free or/and HTL‐free PSCs are developed and attract more and more interest. Herein, the commonly used methods in reducing the defect density and optimizing the energy levels in conventional PSCs in order to simplify their structures are summarized. Then, the development of diverse ETL‐free or/and HTL‐free PSCs is discussed, with the PSCs classified, including their working principles, implemented technologies, remaining challenges, and future perspectives. The aim is to redirect the way toward low‐cost and high‐performance PSCs with the simplest possible architecture.     

Precisely Controlling the Grain Sizes with an Ammonium Hypophosphite Additive for High‐Performance Perovskite Solar Cells

A facile approach to precisely control the perovskite grain sizes is proposed and demonstrated for high‐performance photovoltaic (PV) solar cells. With the introduction of various amounts of NH₄H₂PO₂ (AHP) additives into the PbI₂/CH₃NH₃I precursors, the grain scale of CH₃NH₃PbI₃ films can be finely turned from hundreds of nanometer to micrometer scale, allowing evaluating the effects of crystalline grain boundary on trap densities, charge recombination, and PV device performance. The X‐ray diffraction and X‐ray photoelectron spectroscopy measurements indicate that the formation of intermediates plays a key role in assisting the perovskite crystal growth. The optimized devices show much larger open‐circuit voltages (V_OC) up to 1.10 ± 0.02 V and significantly enhance power conversion efficiencies (PCEs) of 16.5 ± 0.7%, as compared to the control devices with PCE of 9.4 ± 1.0% and V_OC of 1.00 ± 0.03 V. Further investigations confirm that the boosted PV performance origins from the decreased defect densities due to enlarged grain sizes. It is also demonstrated that the approach is general and applicable to other perovskite systems, e.g., HC(NH₂)₂PbI₃. The results suggest the promising application of AHP in achieving high‐performance perovskite PV devices, and shed light on understanding the grain boundary effects on perovskite optoelectronics.     

Dual Interfacial Modification Engineering with 2D MXene Quantum Dots and Copper Sulphide Nanocrystals Enabled High‐Performance Perovskite Solar Cells

The performance of perovskite solar cells (PSCs) strongly depends on the electron transport layer (ETL), perovskite absorber, hole transport layer (HTL), and their interfaces. Herein, the first approach to utilize ultrathin 2D titanium‐carbide MXenes (Ti₃C₂T_x quantum dots, TQD) by engineering the perovskite/TiO₂ ETL interface and perovskite absorber and introducing Cu_1.8S nanocrystals to perfect the Spiro‐OMeTAD HTL is represented. A significant hysteresis‐free power conversion efficiency improvement from 18.31% to 21.64% of PSCs is achieved after modifications with the enhanced short‐circuit current density, open‐circuit voltages, and fill factor. Various advanced characterizations, including femtosecond transient absorption spectroscopy, electrochemical impedance spectroscopy, and ultraviolet photoelectron spectroscopy, elucidate that the TQD/Cu_1.8S significantly contribute to the improved crystalline quality of the perovskite film with its large grain size and improved electron/holes extraction efficiencies at perovskite/ETL and perovskite/HTL interfaces. Furthermore, the long‐time ambient and light stability of PSCs are largely boosted through the TQD and/or Cu_1.8S nanocrystals doping, originating from the better crystallization of perovskite, suppressing the film aggregation and crystallization of HTL, and inhibiting the ultraviolet‐induced photocatalysis of the ETL. The findings highlight the TQD and Cu_1.8S can act as a superfast electrons and holes tunnel for the optoelectronic devices.     

Materials Discovery of Stable and Nontoxic Halide Perovskite Materials for High‐Efficiency Solar Cells

Two critical limitations of organic–inorganic lead halide perovskite materials for solar cells are their poor stability in humid environments and inclusion of toxic lead. In this study, high‐throughput density functional theory (DFT) methods are used to computationally model and screen 1845 halide perovskites in search of new materials without these limitations that are promising for solar cell applications. This study focuses on finding materials that are comprised of nontoxic elements, stable in a humid operating environment, and have an optimal bandgap for one of single junction, tandem Si‐perovskite, or quantum dot–based solar cells. Single junction materials are also screened on predicted single junction photovoltaic (PV) efficiencies exceeding 22.7%, which is the current highest reported PV efficiency for halide perovskites. Generally, these methods qualitatively reproduce the properties of known promising nontoxic halide perovskites that are either experimentally evaluated or predicted from theory. From a set of 1845 materials, 15 materials pass all screening criteria for single junction cell applications, 13 of which are not previously investigated, such as (CH₃NH₃)_0.75Cs_0.25SnI₃, ((NH₂)₂CH)Ag_0.5Sb_0.5Br₃, CsMn_0.875Fe_0.125I₃, ((CH₃)₂NH₂)Ag_0.5Bi_0.5I₃, and ((NH₂)₂CH)_0.5Rb_0.5SnI₃. These materials, together with others predicted in this study, may be promising candidate materials for stable, highly efficient, and nontoxic perovskite‐based solar cells.     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

Polymer‐Modified ZnO Nanoparticles as Electron Transport Layer for Polymer‐Based Solar Cells

The optimization of interfacial layer plays a critical role in the ultimate use of polymer‐based solar cells (PSCs). By introducing an insulating polymer, polystyrene (PS), into the ZnO nanoparticles (NPs) with large particle size, an electron transport layer (ETL) with a thickness of more than 130 nm is produced. The doping of PS not only improves the film quality of ZnO NPs to generate a denser, smoother, and more uniform ETL, but also increases the contact properties between the hydrophilic ZnO and hydrophobic active layer. In comparison to control devices, the power conversion efficiencies (PCEs), short circuit current densities, and fill factors of PSCs with the PS‐modified ETL for a typical fullerene system PTB7‐Th:PC₇₁BM and, also, a nonfullerene system PBDB‐T:ITIC are increased, with PCEs from 8.49% to 9.54% and 10.03% to 11.05%, respectively. The reproducibility, mechanical endurance, and ambient stability of the PSCs with the PS‐modified ZnO NP ETL are significantly improved. The combination of the insulating polymer and ZnO NPs provides a simple, low‐cost way to realize the commercialization of high performance, flexible PSCs.