载波机、中继器及复接分接器

Y2000-62411-1110 0020501应用自适应非线性放大器的 OFDM 系统的性能=Performance of OFDM systems with adaptive nonlinearamplifiers[会,英]/Jong,J.-H.& Yang,K.//1999IEEE MILCOM,Vol.2.—1110～1114(HC)0020502波分复用全光网络路由和波长分配算法[刊]/夏俊//通信学报.—2000,21(8).—85～89(L)本文根据波分复用全光网络路由和波长分配(RWA)实现过程的不同把算法划分为两大类:路由和波长分配分解法和路由和波长分配并行法。对这两类分别讨论了动态和静态 RWA 算法。参7     

多光纤波分复用网动态路由和波长分配算法

本文研究了多光纤波分复用光互连网的动态路由和波长分配问题,提出了基于分层图模型的两种动态路由算法,LG-1和LG-2.这两种算法将路由和波长分配问题转换为如何在分层图中支持尽可能多的光路.这使得设计者可以同时考虑路由和波长分配子问题,从而取得了更好的效果.计算机仿真表明基于分层图的算法大大优于传统的固定路由和动态路由算法.     

一种波长转换范围受限全光网中的波长分配算法

本文研究了波长转换范围受限全光网中的动态路由和波长分配问题,提出了一种固定备选路由条件下新的路由和波长分配算法.算法引入了波长相关性的概念,用波长关联权值定量描述了各路由的前后链路上不同波长之间的相互依赖关系.在建立连接时首先使用那些依赖性强,对其他路由影响小的波长,从全局的角度出发选择最优的路由和波长分配方案.计算机仿真表明,本文算法能够适用于稀疏网络和网状网,在均匀业务强度或者大部分业务量来自于长跳路由的情况下,本文算法能够显著降低网络阻塞概率和使用的波长转换器数目,有效提高系统性能.     

基于强化学习的光传送网路由波长优化

针对光传送网中动态业务的路由和波长问题,提出一种基于强化学习的深度路由波长分配算法DeepRWA。算法基于软件定义网络架构,通过强化学习灵活地调整控制光传送网,实现光网络路由波长分配策略优化。针对路由选择问题,结合链路上的波长使用情况,使用A3C算法选择合适的路由,使得阻塞率最小;针对波长分配问题,使用首次命中算法选择波长。考虑阻塞率、资源利用率、策略熵、价值损失、运行时间及收敛速度等多个指标,利用14节点NSFNET网络拓扑仿真实验。结果表明:当信道中包含18个波长时,与传统KSP-FF算法相比,所提出的路由波长分配算法的阻塞率降低了0.06,资源利用率提高了0.02,但运行时间有增加;在波长数超过45以后,与传统KSP-FF算法相比,所提算法保持阻塞率和资源利用率的同时,运行时间开始降低;当信道中包含波长数为58时,与传统KSP-FF算法相比,所提算法运行时间减少了0.07 ms。由此可见,提出的算法使路由选择和波长分配得到了优化。     

静态波长路由光网络中路由和波长分配算法的统计修正

本文采用统计的方法对以网络最小所需波长数为优化目标的路由和波长分配算法进行了修正.数值模拟计算表明,经过统计方法修正之后,可以求得更接近波长下限的网络所需波长数.另外本文还首次提出用统计的方法对路由和波长分配算法进行比较,通过比较两个算法在经过统计修正之后求得的网络所需波长数的分布可以知道它们的优劣.     

一种稀疏分光配置约束下的WDM网络多播RWA算法

在波长路由WDM网络中,波长路由和波长分配是RWA算法提高光网络阻塞性能的两个重要阶段和关键技术。文章针对现有的稀疏分光配置约束下的光网络多播RWA算法复杂度高、代价高的问题,提出了一种新的稀疏分光器配置的RWA多播算法。该算法摒弃传统RWA算法在波长路由阶段就考虑稀疏分光约束能力的惯性思维,论文首次提出在波长分配阶段,才通过多播长转换器实现满足稀疏分光约束条件的分光能力传递。仿真结果表明,所提算法在平均代价和所需波长数目方面都获得了较优的性能。     

多域光网络中基于优先级的波长路由分配算法

本文提出一种在多域光网络中基于优先级的路由波长分配算法.算法设计旨在解决复杂网络拓扑下,多任务请求路由波长分配问题.本文首先根据复杂网络拓扑情况与任务请求状况,完成多域的划分,对跨域任务的最短路由进行路由分裂;其次依据域内与域间优先级设定策略,完成多任务请求优先级设定;按照优先级顺序,采用模糊优化波长分配算法完成波长分配.仿真结果表明本算法在处理复杂网络拓扑、多任务路由波长分配问题上效果明显,有效的降低了网络请求阻塞率,提高了光网络资源利用率.     

全光网静态路由选择和波长分配的分层图算法

文章提出一种将路由选择和波长分配结合起来的启发式的路由选择和波长分配(RWA)算法．通过这种新的分层图算法和限制光跳距的加权系数来优化全光网的静态路由选择和波长分配，使建立光连接时所需的波长数达到最少．最后对实际的ARPANet等5种光网络进行了计算机仿真，证明了本算法比以前的算法有更好的性能．     

WDM网络中的动态路由波长分配

本文对 WDM全光网中的路由波长分配 (RWA )问题进行了分析和研究 ,详细阐述了面向各类业务的路由波长分配策略以及各种动态路由波长算法的设计思想 ,并对各种算法的性能以及时间复杂度等参数进行了分析 ,并在典型拓扑上进行了仿真     

WDM网络中的动态路由波长分配

本文对WDM全光网中的路由波长分配(RWA)问题进行了分析和研究，详细阐述了面向各类业务的路由波长分配策略以及各种动态路由波长算法的设计思想，并对各种算法的性能以及时间复杂度等参数进行了分析，并在典型拓扑上进行了仿真。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Call for Papers

正Wireless Body-area Networks The last decade has witnessed the convergence of three giant worlds:electronics,computer science and telecommunications.The next decade should follow this convergence in most of our activities with the generalization of sensor networks.In particular with the progress in medicine,people live longer and the aging of population will push the development of wireless personal networks