共查询到19条相似文献,搜索用时 177 毫秒
1.
2.
3.
4.
应用正交试验设计提高拉深件的成形质量 总被引:7,自引:3,他引:4
破裂和起皱是拉深成形的主要缺陷,严重影响零件的表面成形质量.合理布置拉深筋是减少破裂和起皱的有效方法之一.将正交试验设计方法和有限元数值模拟相结合,以拉深筋阻力为设计变量,以板料厚度的分布为质量目标函数,对拉深筋进行优化设计.将这种方法应用到Numisheef93的前翼子板拉深件成形中,经过优化设计的成形结果,无论是在防止破裂,还是在减少起皱方面上都得到了较好的效果,并且这种方法可以明显地减少计算次数,提高优化效率. 相似文献
5.
6.
7.
8.
9.
10.
11.
I. S. Song D. J. Yoo J. W. Yoon D. Y. Yang H. Huh J. H. Lee 《Journal of Materials Engineering and Performance》1995,4(5):593-598
The forming of automobile sheet metal parts in a draw die consists of clamping a blank by binders to form a binder wrap and
drawing the blank into the final part. This paper proposes a numerical method to calculate the binder wrap. A blank is composed
of two regions: the contact region with the die face and the noncontact region of the die cavity. In this study, surface boundary
condition is suggested for calculating the configuration of the binder wrap. Surface boundary condition means that the three-dimensional
geometric data of the die face are used as the base for the displacement boundary condition of the finite-element analysis.
To verify the validity of the proposed method, the binder wraps of complicated automobile parts, including a front fender
and a trunk lid, are analyzed. 相似文献
12.
分析了汽车覆盖件前翼子板的结构特点和成形工艺,介绍了侧翻边模具结构,着重在模具结构设计和现场调试及产品质量等几个方面进行论述。 相似文献
13.
14.
15.
分析了翼子板裙板的工艺特点,并制定了合理的工艺方案,重点介绍了一模四件的拉延模的设计与制造,同时采用板料三维成形分析软件Dynaform对其拉深成形工序进行了数值模拟仿真,得到了合理的拉深工艺补充型面及拉深工艺参数。这种一模四件的模具结构,极大地提高了材料的利用率,同时提高了劳动生产率,节约了生产成本,并且有利于材料的流动。 相似文献
16.
17.
采用刚粘塑性有限元方法对汽车前轴成型辊锻与模锻复合工艺中成型辊锻过程进行了模拟,获得并分析了成形过程、金属流动规律和力能参数曲线,揭示了其工艺典型特点,其结果对前轴成型辊锻的工艺和模具设计具有指导和参考作用。 相似文献
18.
桑塔纳2000轿车前翼子板模具设计 总被引:3,自引:0,他引:3
从桑塔纳2000型轿车前翼子板的工艺性出发,分析了前翼子板的工艺特点,对前翼子板模具进行了改进设计,从而改善了零件的表面质量和模具的制造精度 ,并延长了模具的使用寿命 相似文献