Developing and sustaining new regional industrial paths: investigating the role of ‘outsiders’ and factors shaping long-term trajectories

This article casts light on the development of new regional industrial paths. We explore factors explaining why regional industries with similar early path development trajectories may exhibit diverging outcomes in the longer run and pay particular attention to the role of ‘outsiders’ in the initiation and further development of regional industrial paths. Drawing on a comparative case study of IT industries in Linköping and Karlskrona, two medium-sized Swedish city regions, we find that the inflow of outsiders was an important driver of early path development processes. However, we find that the interplay between regional preconditions and arriving outsiders, and between outsiders and existing actors, substantially shaped the long-term sustainability of the industrial paths in our study. In particular, the role of agency in fostering positive self-reinforcing mechanisms and structure–agency dynamics are highlighted as key factors for understanding how new industrial development paths are unfolding in the longer term.     

Psychological factors influencing laypersons’ acceptance of climate engineering,climate change mitigation and business as usual scenarios

In the past two decades, research on so-called climate engineering approaches has increased. These technologies are considered to be potential substitutes for mitigation strategies in combating climate change. The ongoing process of layperson acceptance and resultant opinion formation can be expected to play a crucial role in future public debate about field experiments or the actual deployment of climate engineering.In July 2017, we assessed public reactions from the German population in a representative online survey. Participants were given a brief text informing them about climate change and one of four different scenarios in a between-subject design (N = 678). Two of the scenarios described the use of climate engineering technologies - stratospheric aerosol injection (SAI) and bio-energy with carbon capture and storage (BECCS) - one of them covered conventional mitigation strategies and the fourth group was given an outline of the business-as-usual (BAU) approach.The mitigation scenario (willingness for individual behaviour changes) showed the highest acceptance rate (M = 74.23), which was significantly higher than acceptance of the other scenarios (p < .001). Acceptance of BECCS (M = 53.15) was higher than acceptance of SAI (M = 46.25, p = .043) and BAU (M = 42.94; p = .006). We undertook a relative-importance analysis to investigate the influence of multiple predictor variables on acceptance formation for each scenario; the variance thus explained ranged from 80.3% to 86.8%. The results point up the influence of perceived risks, subjective norms and affective responses on the acceptance of climate engineering technologies. By contrast, person-specific and relatively stable variables, such as environmental attitudes and wishful thinking, are particularly relevant in the evaluation of the mitigation scenario.     

Does gender moderate the relationship between driver aggression and its risk factors?

Aim

The current study assessed gender as a potential moderator of the relationship between self-reported driver aggression and various demographic variables, general and driving-related risk factors.

Methods

Using data from a general-population telephone survey conducted from July 2002 through June 2005, two approaches to binary logistic regression were adopted. Based on the full dataset (n = 6259), the initial analysis was a hierarchical-entry regression examining self-reported driver aggression in the last 12 months. All demographic variables (i.e., gender, age, income, education, marital status), general risk factors (i.e., psychological distress, binge drinking, cannabis use), and driving-related risk factors (i.e., driving exposure, stressful driving, exposure to busy roads, driving after drinking, driving after cannabis use) were entered in the first block, and all two-way interactions with gender were entered stepwise in the second block. The subsequent analysis involved dividing the sample by gender and conducting logistic regressions with main effects only for males (n = 2921) and females (n = 3338) separately.

Results

Although the prevalence of driver aggression in the current sample was slightly higher among males (38.5%) than females (32.9%), the difference was small, and gender did not enter as a significant predictor of driver aggression in the overall logistic regression. In that analysis, difficulty with social functioning and being older were associated with a reduced risk of driver aggression. Marital status and education were unrelated to aggression, and all other variables were associated with an increased risk of aggression. Gender was found to moderate the relationships between driver aggression and only three variables: income, psychological distress, and driving exposure. Separate analyses on the male and female sub-samples also found differences in the predictive value of income and driving exposure; however, the difference for psychological distress could not be detected using this separate regression approach. The secondary analysis also identified slight differences in the predictive value of four of the risk factors, where the odds ratios for both males and females were in the same direction but only one of the two was statistically significant.

Conclusions

The results demonstrate the importance of conducting the gender analysis using both regression approaches. With few exceptions, factors that were predictive of driver aggression were generally the same for both male and female drivers.     

Literature-related discovery: common factors for Parkinson’s Disease and Crohn’s Disease

Literature-related discovery (LRD) is the linking of two or more literature concepts that have heretofore not been linked (i.e., disjoint), in order to produce novel, interesting, and intelligible knowledge (i.e., potential discovery). The mainstream software for assisting LRD is Arrowsmith. It uses text-based linkage to connect two disjoint literatures, and it generates intermediate linking literatures by matching Title phrases from two disjoint literatures (literatures that do not share common records). Arrowsmith then prioritizes these linking phrases through a series of text-based filters. The present study examines citation-based linkage in addition to text-based linkage to link disjoint literatures through a process called bibliographic coupling. Two disjoint literatures were selected for the demonstration: Parkinson’s Disease (PD) (neurodegeneration) and Crohn’s Disease (CD) (autoimmune). Three cases were examined: (1) matching phrases in records with no shared references (text-based linkage only); (2) shared references in records with no matching phrases (citation-based linkage only); (3) matching phrases in records with shared references (text-based and citation-based linkages). In addition, the main themes in the body of shared references were examined through grouping techniques to identify the common themes between the two literatures. All the high-level concepts in the Case 1) records could be found in Case 3) records Some new concepts (at the sub-set level of the main themes) not found in the Case 3) records were identified in the Case 2) records. The synergy of matching phrases and shared references provides a strong prioritization to the selection of promising matching phrases as discovery mechanisms. There were three major themes that unified the PD and CD literatures: Genetics; Neuroimmunology; Cell Death. However, these themes are not completely independent. For example, there are genetic determinants of the inflammatory response. Naturally occurring genetic variants in important inflammatory mediators such as TNF-alpha appear to alter inflammatory responses in numerous experimental and a few clinical models of inflammation. Additionally, there is a strong link between neuroimmunology and cell death. In PD, for example, neuroinflammatory processes that are mediated by activated glial and peripheral immune cells might eventually lead to dopaminergic cell death and subsequent disease progression.     

Severe bicycling injury risk factors in children and adolescents: A case–control study

Background

Bicycling is the most common cause of sports and recreation injury in children and adolescents; yet, there is limited evidence on the factors associated with severe bicycling injuries in youth.

Methods

Case–control study of injured bicyclists less than 18 years old seen in seven emergency departments (EDs) from May 2008 to October 2010. Cases were bicyclists hospitalized after their ED visit (severe injury). Controls were bicyclists seen and discharged from the ED (non-severe injury). Personal, environmental, and crash characteristics were collected by interview. Injury data were collected from medical charts. Crude and adjusted odds ratios (ORs) and 95% confidence intervals (CIs) from logistic regression were used to estimate the odds of hospitalization associated with risk factors. Multiple imputation techniques were employed to address missing data.

Results

There were 1470 participants including 119 cases. Those ages 13–17 had the highest proportion (23%) of severe injuries resulting from motor vehicle [MV] collision. In models including age, sex and MV collision, being male (OR: 2.02; 95% CI: 1.21–3.38), not wearing a helmet (OR: 2.18; 95% CI: 1.43–3.31) and MV collision (OR: 3.91; 95% CI: 2.26–6.78) were significant risk factors for severe injury. Riding on a paved surface (OR: 0.63; 95% CI: 0.41–0.97) and utilitarian (school, work) bicycling (OR: 0.44; 95% CI: 0.2–0.94) decreased injury risk. Results were similar, apart from utilitarian bicycling (OR: 0.49; 95% CI: 0.22–1.06), after imputation for missing data.

Conclusion

Bicycle–MV collisions increase severe injury risk in youth, and adolescents are often injured in these events. This suggests separating bicyclists from MVs or traffic calming strategies could improve safety.     

Cardiovascular and cancer risk factors analysis for 2001–2020 from the global research output and European newspapers

Scientometrics - Cancer and cardiovascular disease (CVD) are now two of the leading components of the global burden of disease, especially in high- and upper-middle-income countries. Causes of the...     

The human factors in risk analyses of process plants: The control room operator model ‘TESEO’

The ability to make mistakes is an innate human trait; however, until recently, the ability to spread death and destruction through one's own mistakes has been mainly limited to political men and Generals. Nowadays, there are other individuals capable, when carrying out their work, of making mistakes with exceptionally grave consequences. This is caused by the construction of increasingly larger plant (with consequently higher destructive potentials), to the centralization of controls in one single, or a few, control rooms, and to the fact that many important decisions are concentrated on a few operators. Recent surveys seem to reveal that at least 40% of the total of disastrous events in industrial activities derive from human error. It therefore appears evident that each risk analysis made on systems in which man plays a part, must take possible human error into consideration.This report is an attempt to suggest data, methodologies and programs for an analysis of human factors in process industries.     

Investigating gig workers’ commitment to crowdsourced logistics platforms: Fair employment and social exchange perspectives

Crowdsourced logistics is developing rapidly during and post COVID-19. As key workers of crowdsourced logistics, gig workers' commitment is essential for the sustainable development of gig platforms. Drawing from the social exchange paradigm and organisational identification, this study explores how the five principles of Fairwork provided by crowdsourced logistics platforms (i.e., fair representation, fair management, fair conditions, fair contracts, fair pay) contribute to gig workers' organisational identification, which subsequently influences career satisfaction and career commitment. The study gathered 177 responses from gig workers in Singapore in July 2022. The structural equation modelling findings suggest that factors such as fair conditions, fair pay, fair representation, fair management, and fair contracts have substantial impacts on organisational identification. Moreover, the link between organisational identification and career commitment is partially mediated by career satisfaction. Overall, this study enriches the literature by proposing a suitable theoretical model to explain gig workers' commitment to crowdsourced logistics platforms. Moreover, the empirical results provide implications on the understanding of gig workers’ concerns for gig platforms, as well as policy suggestions for the maintenance of gig workers in the future.     

US commercial air tour crashes, 2000–2011: Burden,fatal risk factors,and FIA Score validation

Introduction

This study provides new public health data concerning the US commercial air tour industry. Risk factors for fatality in air tour crashes were analyzed to determine the value of the FIA Score in predicting fatal outcomes.

Methods

Using the Federal Aviation Administration's (FAA) General Aviation and Air Taxi Survey and National Transportation Safety Board data, the incidence of commercial air tour crashes from 2000 through 2010 was calculated. Fatality risk factors for crashes occurring from 2000 through 2011 were analyzed using regression methods. The FIA Score, Li and Baker's fatality risk index, was validated using receiver operating characteristic (ROC) curves.

Results

The industry-wide commercial air tour crash rate was 2.7 per 100,000 flight hours. The incidence rates of Part 91 and 135 commercial air tour crashes were 3.4 and 2.3 per 100,000 flight hours, respectively (relative risk [RR] 1.5, 95% confidence interval [CI] 1.1–2.1, P = 0.015). Of the 152 air tour crashes that occurred from 2000 through 2011, 30 (20%) involved at least one fatality and, on average, 3.5 people died per fatal crash. Fatalities were associated with three major risk factors: fire (adjusted odds ratio [AOR] 5.1, 95% CI 1.5–16.7, P = 0.008), instrument meteorological conditions (AOR 5.4, 95% CI 1.1–26.4, P = 0.038), and off-airport location (AOR 7.2, 95% CI 1.6–33.2, P = 0.011). The area under the FIA Score's ROC curve was 0.79 (95% CI 0.71–0.88).

Discussion

Commercial air tour crash rates were high relative to similar commercial aviation operations. Disparities between Part 91 and 135 air tour crash rates reflect regulatory disparities that require FAA action. The FIA Score appeared to be a valid measurement of fatal risk in air tour crashes. The FIA should prioritize interventions that address the three major risk factors identified by this study.     

Factors influencing powders’ flowability and favorable phases like crystalline (Mullite and quartz) and amorphous phases of plasma-sprayed fly ash coatings suitable for marine and offshore applications

Due to its rich mineralogy, fly ash (FA), an industrial waste, has been used to combat erosive, corrosive environments. Powder flowability dictates coating properties. In this investigation, raw FA powder was obtained from a thermal power plant and sieved in various sizes to assess their flowability. Powder's physical characteristics, such as specific surface area, Blaine's fineness number, and bulk density, were determined, and their influence on powder flowability was analyzed. Of these properties, bulk density affects more. Rietveld refinement was performed on the powder to quantify the phases. The powders had 45.08 ± 11.38 amorphous and 11.00 ± 2.76 % of mullite phases. Later, alumina was added between 10 and 50 wt% to FA, and samples were subjected to high-temperature X-ray diffraction at 1150 °C. A ∼32.27% rise in Mullite content was observed for 50 wt% alumina, with ∼119% decrease in the amorphous phase. Finally, one set of FA without additives coating was plasma sprayed onto a marine-grade steel substrate. The coating showed ∼17.31 ± 0.6% of mullite and ∼69.43 ± 0.6 % of the amorphous phase, with decent Mechanical properties. Therefore, 50 wt% alumina in FA powder has improved the mullite phase, bulk density (43%), and flowability by decreasing the amorphous phase content.     

The acquisition of tacit knowledge in China: An empirical analysis of the ‘supplier-side individual level’ and ‘recipient-side’ factors

The

Ion-exchange voltammetry as a solid-phase microextraction analytical method: factors influencing the mass transfer to perfluorosulfonated ionomer film-coated electrodes and some of their consequences on the current responses

A simple theoretical model of mass transfer kinetics at an electrode coated with an ion-exchange film polymer is proposed. The model takes into account the analyte depletion in solution and gives the relationship between the ion-exchange voltammetric (IEV) peak current and the initial analyte concentration in the sample matrix. The verification of the model is investigated at disposable Nafion film-coated screen-printed electrodes, using the redox cationic (ferrocenylmethyl)trimethylammonium salt. It is shown that the theoretical model and the experimental data fit satisfactorily insofar as the variation of the extraction and apparent diffusion coefficients of the salt with the film thickness are taken into account. Indeed, the film thickness plays a crucial role for the optimization of the IEV sensitivity, because the physicochemical properties of the recast Nafion polymer are dependent on the amount per unit area of Nafion deposited on the electrode surface.     

An evaluation of the impact of ‘Lifeskills’ training on road safety,substance use and hospital attendance in adolescence

PurposeTo evaluate if attendance at Lifeskills, a safety education centre for children in Year 6 (10–11 years), is associated with engagement in safer behaviours, and with fewer accidents and injuries, in adolescence.MethodsThe sample are participants in the Avon Longitudinal Study of Parents and Children who attended school in the Lifeskills catchment area in Year 6; 60% attended Lifeskills. At 14–15 years, participants (n approximately 3000, varies by outcome) self-reported road safety behaviours and accidents, and perceived health effects and use of alcohol, cannabis, and tobacco. Additional outcomes from linkage to Hospital Episodes Statistics were available for a sub-sample (n = 1768): hospital admittance (for accident-related reason, from 11–16 years) and A&E attendance (for any reason, from approximately 14–16 years).ResultsChildren who attended Lifeskills were more likely to report using pedestrian crossings on their way to school than children who did not attend (59% versus 52%). Lifeskills attendance was unrelated to the ownership of cycle helmets, or the use of cycle helmets, seat belts, or reflective/fluorescent clothing, or to A&E attendance. Use of cycle helmets (37%) and reflective/fluorescent clothing (<4%) on last cycle was low irrespective of Lifeskills attendance. Lifeskills attendance was associated with less reported smoking and cannabis use, but was generally unrelated to perceptions of the health impact of substance use.ConclusionsLifeskills attendance was associated with some safer behaviours in adolescence. The overall low use of cycle helmets and reflective/fluorescent clothing evidences the need for powerful promotion of some safer behaviours at Lifeskills and at follow-up in schools.     

Who support open access publishing? Gender,discipline, seniority and other factors associated with academics’ OA practice

This paper presents the findings from a survey study of UK academics and their publishing behaviour. The aim of this study is to investigate academics’ attitudes towards and practice of open access (OA) publishing. The results are based on a survey study of academics at 12 Russell Group universities, and reflect responses from over 1800 researchers. This study found that whilst most academics support the principle of making knowledge freely available to everyone, the use of OA publishing among UK academics was still limited despite relevant established OA policies. The results suggest that there were differences in the extent of OA practice between different universities, academic disciplines, age and seniorities. Academics’ use in OA publishing was also related to their awareness of OA policy and OA repositories, their attitudes towards the importance of OA publishing and their belief in OA citation advantage. The implications of these findings are relevant to the development of strategies for the implementation of OA policies.     

How meaningful are risk determinations in the absence of a complete dataset? Making the case for publishing standardized test guideline and ‘no effect’ studies for evaluating the safety of nanoparticulates versus spurious ‘high effect’ results from single investigative studies

A recent review article critically assessed the effectiveness of published research articles in nanotoxicology to meaningfully address health and safety issues for workers and consumers. The main conclusions were that, based on a number of flaws in study designs, the potential risk from exposures to nanomaterials is highly exaggerated, and that no ‘nano-specific’ adverse effects, different from exposures to bulk particles, have been convincingly demonstrated. In this brief editorial we focus on a related tangential issue which potentially compromises the integrity of basic risk science. We note that some single investigation studies report specious toxicity findings, which make the conclusions more alarming and attractive and publication worthy. In contrast, the standardized, carefully conducted, ‘guideline study results’ are often ignored because they can frequently report no adverse effects; and as a consequence are not considered as novel findings for publication purposes, and therefore they are never considered as newsworthy in the popular press. Yet it is the Organization for Economic Cooperation and Development (OECD) type test guideline studies that are the most reliable for conducting risk assessments. To contrast these styles and approaches, we present the results of a single study which reports high toxicological effects in rats following low-dose, short-term oral exposures to nanoscale titanium dioxide particles concomitant with selective investigative analyses. Alternatively, the findings of OECD test guideline 408, standardized guideline oral toxicity studies conducted for 90 days at much higher doses (1000 mg kg⁻¹) in male and female rats demonstrated no adverse effects following a very thorough and complete clinical chemical, as well as histopathological evaluation of all of the relevant organs in the body. This discrepancy in study findings is not reconciled by the fact that several biokinetic studies in rats and humans demonstrate little or no uptake of nanoscale or pigment-grade TiO₂ particles following oral exposures. We conclude that to develop a competent risk assessment profile, results derived from standardized, guideline-type studies, and even ‘no effect’ study findings provide critically useful input for assessing safe levels of exposure; and should, in principle, be readily acceptable for publication in peer-reviewed toxicology journals. This is a necessary prerequisite for developing a complete dataset for risk assessment determinations.     

How meaningful are risk determinations in the absence of a complete dataset? Making the case for publishing standardized test guideline and ‘no effect’ studies for evaluating the safety of nanoparticulates versus spurious ‘high effect’ results from single investigative studies

Abstract

A recent review article critically assessed the effectiveness of published research articles in nanotoxicology to meaningfully address health and safety issues for workers and consumers. The main conclusions were that, based on a number of flaws in study designs, the potential risk from exposures to nanomaterials is highly exaggerated, and that no ‘nano-specific’ adverse effects, different from exposures to bulk particles, have been convincingly demonstrated. In this brief editorial we focus on a related tangential issue which potentially compromises the integrity of basic risk science. We note that some single investigation studies report specious toxicity findings, which make the conclusions more alarming and attractive and publication worthy. In contrast, the standardized, carefully conducted, ‘guideline study results’ are often ignored because they can frequently report no adverse effects; and as a consequence are not considered as novel findings for publication purposes, and therefore they are never considered as newsworthy in the popular press. Yet it is the Organization for Economic Cooperation and Development (OECD) type test guideline studies that are the most reliable for conducting risk assessments. To contrast these styles and approaches, we present the results of a single study which reports high toxicological effects in rats following low-dose, short-term oral exposures to nanoscale titanium dioxide particles concomitant with selective investigative analyses. Alternatively, the findings of OECD test guideline 408, standardized guideline oral toxicity studies conducted for 90 days at much higher doses (1000 mg kg^?1) in male and female rats demonstrated no adverse effects following a very thorough and complete clinical chemical, as well as histopathological evaluation of all of the relevant organs in the body. This discrepancy in study findings is not reconciled by the fact that several biokinetic studies in rats and humans demonstrate little or no uptake of nanoscale or pigment-grade TiO₂ particles following oral exposures. We conclude that to develop a competent risk assessment profile, results derived from standardized, guideline-type studies, and even ‘no effect’ study findings provide critically useful input for assessing safe levels of exposure; and should, in principle, be readily acceptable for publication in peer-reviewed toxicology journals. This is a necessary prerequisite for developing a complete dataset for risk assessment determinations.     

Exploring the coupling relationship of industrial agglomeration and low-carbon economy considering spatiotemporal differentiation: An empirical study in China’s construction machinery industry

Although China’s construction machinery thrives to meet the needs of construction, a number of challenges still remain to be overcome, such as lack of thorough knowledge of regional disparities and several limitations in terms of carbon emissions and economic development. Meanwhile, a low-carbon economy was proposed and implemented in China. This research aims to investigate the differences in industrial agglomeration of construction machineries and further explore the relationship between industrial agglomeration and low-carbon economy. On this basis, spatiotemporal analysis was performed to evaluate the levels of industrial agglomeration in different regions based on the situations of China’s construction machinery industry. Furthermore, this study explored the interaction between industrial agglomeration and low-carbon economy utilizing the coupling coordination analysis method. Results showed that the coupling coordination of the two subsystems was extremely unbalanced in 2006, and it maintained an increasing trend, reaching a relatively high level in 2018. Finally, suggestions, such as establishing a policy guarantee system and implementing variable policies in different regions, were proposed to provide guidelines for the government decision-making and promote the sustainable development of China’s construction machinery industry.