共查询到20条相似文献,搜索用时 484 毫秒
1.
为了拓宽齿轮的反求建模途径,探索了从曲面重构的角度建立齿轮几何模型的方法。以具有较高运动精度和接触精度要求、用于某重型卡车中桥中行星机构的行星轮为对象,结合Imageware和Pro/E两个软件的优势,进行反求建模研究,先在Imageware中依据测得的点云数据重构出一个轮齿的曲面和一些特征曲线,然后在Pro/E中构建齿轮的整张曲面,最终去除材料得到了基于点云数据的直齿轮实体模型。研究结果表明,通过曲面重构来建立齿轮CAD模型是行之有效的方法。 相似文献
3.
4.
5.
基于局部基面参数化的点云数据边界自动提取 总被引:13,自引:0,他引:13
提出了一种反求工程中基于局部基面参数化方法的点云数据边界特征的自动提取方法。首先选择合适的局部基面 ,然后用点云垂直投影于局部基面投影点的参数化代替空间点的参数化 ,二次参数曲面逼近点云 ,再利用曲面的微分特性估计点云数据的曲率值 ,求出曲率极值点 ,从中提取边界点。通过这些边界点可以进一步拟合边界曲线 ,达到对点云数据进行自动分片的目的。该方法具有较强的可操作性和实用性 ,对于反求工程的自动化和智能化研究具有实际意义 相似文献
6.
7.
8.
9.
三维测量获得的点云数据一般须进行去噪处理以保证重构曲面的精度,光学三维测量中这些噪点主要是由阴影形成的,因此阴影去除的效果直接影响到反求工程的效率和精度.采用基于Gray-code投影的方法实现三维面型测量,根据Gray-code唯一、有序的特点,在测量过程中进行阴影处理,可以有效地去除阴影,从而去除测量结果中的噪点.该方法可以避免噪声,保证点云数据的准确性,为后续的曲面重构提供便利,在反求工程中具有重要的实用价值. 相似文献
10.
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
14.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
15.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
16.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
17.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献
18.
19.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
20.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献