Planar meander sleeve monopole antenna for DVB-H/GSM mobile handsets

A novel planar meander sleeve monopole antenna for digital video broadcasting-hand held (DVB-H) and GSM mobile handsets is presented. By using the planar sleeve monopole type radiating element constructed with meander strips, the antenna provides a degree of miniaturisation while retaining a wide bandwidth covering the DVB-H and GSM-900 bands. A prototype is constructed and tested, which shows that an impedance bandwidth of 498 MHz (463-961 MHz) within 2.5:1 VSWR is achieved.     

Broadband sleeve monopole type antenna for dual-band PCS/IMT-2000

A modified sleeve monopole type antenna that features a novel broadband technique is demonstrated experimentally and numerically. A bandwidth of 24.2%1 (|S₁₁|<-20 dB) can be achieved, and an omnidirectional radiation pattern is obtained. The electrical characteristics of the proposed antenna make it attractive for use in mobile handset and repeater applications     

Broadband dual frequency microstrip antenna

A new dual port microstrip antenna geometry for dual frequency operation is presented. The structure consists of the intersection of two circles of the same radius with their centres displaced by a small fraction of the wavelength. This antenna provides wide impedance bandwidth and excellent isolation between its ports. The gain of the antenna is comparable to that of a standard circular microstrip antenna operating at the same resonant frequency. A theoretical analysis for calculating the resonant frequencies of the two ports is also presented     

Compact monopole antenna for GSM/DCS operation of mobile handsets

A novel dual-frequency monopole antenna, with a low profile and also with a small transverse size, is proposed. Firstly, by investigating and utilising a taper meander line antenna with a very large vertex angle, the antenna height is reduced to 15 mm. Secondly, by wrapping it in a box-like structure, the antenna transverse width is reduced to 12 mm. Thirdly, by introducing another geometrically complementary meander line branch, the second resonant mode is enhanced. Finally an antenna with dimensions of 15/spl times/12/spl times/7 mm is designed, and good impedance bandwidth performance for GSM (890-960 MHz) and DCS (1710-1880 MHz) bands is observed.     

A compact dual band planar branched monopole antenna for DCS/2.4-GHz WLAN applications

A compact dual band planar antenna for a digital communication system (DCS)/2.4-GHz WLAN application is presented. The two resonant modes of the proposed antenna are associated with various length of the monopoles, in which a longer arm contributes for the lower resonant frequency and a shorter arm for higher resonant frequency. The experimental results show that the designed antenna can provide excellent performance for DCS/2.4-GHz WLAN systems, including sufficiently wide frequency band, moderate gain, and nearly omnidirectional radiation coverage. The outcome of the experimental results along with the design criteria are presented in this letter.     

Broadband dual-frequency meandered CPW-fed monopole antenna

A coplanar waveguide meandered feedline is introduced to obtain a broadband dual-frequency operation of a planar monopole antenna. The modified feeding technology can lead to good impedance matching in a wide dual-band covering 2.4/5.2 GHz WLAN operations. A prototype of the proposed antenna has been constructed and tested. Good radiation characteristics of monopole-like patterns, 23.3 and 29.5% bandwidths, and 2.41 and 4.21 dBi peak antenna gains for the lower and upper bands, respectively, have been obtained.     

Wideband to narrowband/dual band characteristics of monopole antenna using frequency selective surfaces

A monopole antenna having desirable transmission characteristics with high gain is proposed. The monopole antenna comprises 45° tilted square shaped patch and modified rectangular metallic ground plane on FR4 dielectric substrate. The proposed monopole antenna operates from 2.6 GHz to 9.7 GHz with maximum peak gain of 2.3 dBi. Now, a dual-layer aperture-type FSS is designed having a passband from 5.9 GHz to 9.2 GHz and incorporated with the proposed monopole antenna. Thus, the combination only covers the selective frequency band from 5.5 GHz to 8.7 GHz with a stable gain of around 5 dBi. Second, another FSS is designed, which has one stop-band from 4.1 GHz to 5.4 GHz and two passbands on the both sides of this stop-band. This combination does not work from 4.1 GHz to 5.5 GHz but covers dual band from 2.48 GHz to 3.3 GHz with a peak gain of 5 dBi and 5.5 GHz to 10 GHz with a peak gain of 5.5 dBi. Therefore, without modifying the antenna design, any tunable transmission band can be achieved by the proposed combination. The proposed antenna and FSS combination structure may be suitable for military wireless applications for its band selection characteristics.     

Wideband monopole antenna for DVB-T applications

A novel asymmetric fork-like monopole antenna for digital video broadcasting-terrestrial (DVB-T) signal reception for application in the UHF band is presented. The proposed antenna consists of two two-branch strip monopoles on a rectangular ground plane with a concave. The concavity in the ground pattern serves as an effective means for the gap between the radiating element and the ground plane for impedance matching. The influence of various parameters on antenna characteristics has been investigated. Results show a wide bandwidth of 461 MHz (451?912 MHz) or 70% of DVB-T centred frequency (655 MHz). The proposed antenna has omnidirectional radiation patterns in the yz-plane. Details of the proposed antenna design and experimental results of the constructed prototypes are presented.     

Planar monopole in wrapped structure for low-profile GSM/DCS mobilephone antenna

A novel planar monopole consisting of two sub-patches and wrapped into a compact structure with a height of 10 mm for 900 and 1800 MHz operation is presented. The antenna can be mounted on the top portion of a mobile phone housing a small distance (4 mm) from the ground plane, resulting in a low profile of 14 mm (about 4.2% of the wavelength at 900 MHz), and the obtained 10 dB return-loss impedance bandwidths cover the GSM (880-860 MHz) and DCS (1710-1880 MHz) bands     

双阻带特性的超宽带单极子天线设计

设计了一种具有双阻带特性的超宽带单极子天线,对嵌入开路微带谐振器和边缘相似谐振器进行了分析.利用这两种谐振器可以分别在Wimax（3.33～6 GHz ）和WLAN（ 5.15～5.85 GHz）两个频段产生阻带.通过改变天线几何尺寸,可以分别对阻带的中心频率和带宽独立控制.天线利用印刷线路板（PCB）技术加工实现,并对其阻带特性、回波损耗、辐射方向图、辐射效率和峰值增益进行了测试,测试结果和仿真结果吻合很好.     

Printed annular monopole antenna for ultra-wideband applications

A novel printed monopole antenna for ultra-wideband applications is introduced, which consists of an annular monopole patch and a trapeziform ground plane with a tapered CPW feeder in the middle. The simulated and experimental results demonstrate that this antenna achieves a ratio impedance bandwidth of more than 10:1 for VSWR/spl les/2, and exhibits the nearly omnidirectional radiation pattern with a simple structure.     

多频共面波导馈电平面开式套简天线研究

提出了一种同时支持诸多频带工作的共面波导馈电平面开式套筒天线.共面波导中心金属导带以及接地板均采用渐变的形状,天线采用开式套筒结构,并加入了一个倒L型寄生贴片,以最大程度地展宽天线带宽.与以往所提出的共面波导馈电天线相比,此天线具有尺寸小,覆盖更宽的频带,可同时支持个人通信系统(PCS),宽带码分多址系统(WCDMA)...     

Triple-frequency planar monopole antenna for side-feed communication device on GSM/DCS/PCS operation

A novel side-feed planar monopole antenna capable of triple-frequency operation at about 900, 1800 and 1900 MHz is presented. The planar monopole antenna occupies a small area of 6/spl times/31 mm, and is easily made using thin copper. The planar monopole antenna can be side-fed and mounted perpendicularly to the main circuit board of a communication device so that it offers a novel design with a free degree of feed point so as to save device space, resulting in a low profile to the system ground plane. In addition, the obtained impedance bandwidths of the proposed antenna at about 900, 1800 and 1900 MHz can cover the GSM (890-960 MHz), DCS (1710-1880 MHz) and PCS (1850-1990 MHz) bands.     

Triple-band CPW-fed compact monopole antennas for GSM/PCS/DCS/WCDMA applications

A triple-band coplanar waveguide (CPW)-fed LI-shaped monopole antenna is proposed. The antenna is composed of an I-shaped monopole and a meandered L-shaped one. The dimensions of the design are 29 times 28 mm which are 0.077 lambda times 0.075 lambda in terms of the lowest operating frequency of 800 MHz. The antenna operation presents attractive characteristics, each monopole is independently optimised to the resonant frequency and the impedance bandwidth without affecting those of other bands. The antenna shows improved radiation efficiency of individual monopoles for a global system for mobile communication, personal communication systems, digital communication systems, and wireless code division multiple access applications.     

Broadband CPW-fed folded-slot monopole antenna for 5.8 GHz RFID application

A folded slot is introduced to expand the impedance bandwidth and miniaturise the size of a coplanar waveguide (CPW)-fed patch monopole antenna for radio frequency identification (RFID) applications. The designed antenna, which, including ground plane, is only 13 mm in height and 11 mm in width, can operate at the 5.8 GHz band with measured impedance bandwidth and average antenna gain of 30% and /spl ges/5 dBi, respectively, and also conical radiation patterns. These properties make the antenna suitable for RFID tags.     

共面波导馈电的频率可重构印刷单极子天线

提出了一种间接改变天线辐射体长度的方法。该方法通过改变天线馈线中地导体的长度,间接地改变天线辐射体的长度,有效避免了有源开关对天线辐射性能的影响。为验证此方法,设计了一个共面波导馈电的频率可重构印刷单极子天线,该天线利用PIN二极管来改变馈电端地的长度。实验结果表明:控制开关的工作状态,可使天线的谐振频率发生明显的变化。相应的中心频率分别为1.9 GHz和2.3 GHz,相对阻抗带宽分别为20.8%和17.2%。     

Single layer printed monopole antenna for dual ISM-band operation

The ability of a single layer strip fed printed monopole, which has a serial-slot and an end-stepped feed-strip, to operate at dual Industrial, Scientific, and Medical-band (2.4 and 5.8 GHz bands) is demonstrated. This antenna combines omni-directional and broad bandwidth in an easy to fabricate structure. Experimental results indicate that the VSWR 2:1 bandwidths achieved were 8.2% and 18.2% at 2.45 GHz and 5.5 GHz. Effects of varying the serial-slot dimensions and the ground-plane size on the antenna performance are also described.     

Octa-band internal monopole antenna for mobile phone applications

A low-profile monopole antenna covering the following frequency bands is proposed for mobile phone applications: Global System for Mobile Communications (GSM-900), Digital Communication System (DCS), Personal Communication Services (PCS), Universal Mobile Telecommunications System (UMTS), Wireless Broadband (WiBro), Bluetooth, Satellite-Digital Multimedia Broadcasting (S-DMB), and Wireless Local Area Network (WLAN) frequency bands in the 5.0 GHz range. Multiple resonators in a compact configuration have been used to realise the octa-band internal antenna within a volume of 2.08 cm³ that is very attractive for multifunctional slim handsets. Measured performances of a prototype antenna have been compared to predicted results.     

Dual-band metamaterial-inspired small monopole antenna for WiFi applications

A simple dual-band metamaterial-inspired small monopole antenna is proposed for WiFi applications. In addition to the regular monopole resonance, the metamaterial-inspired loading is exploited to create a second resonance for the lower WiFi band while maintaining the antenna's small form-factor. The measured S parameters and radiation patterns show that the proposed design is suitable for emerging WLAN applications.     

新型小尺寸双陷波超宽带天线设计

提出了一种基于槽天线的小型化、高隔离度的超宽带(Ultra Wideband, UWB)多入多出(Multiple-Input Multiple-Output, MIMO)天线.该MIMO天线由两个槽天线单元构成, 为了增加天线阻抗带宽, 每个槽天线单元由末端带有圆形贴片的微带线和末端为圆形的槽线两部分耦合馈电.采用在地板上开槽和方向图分集方法, 减少地板表面波和空中电磁波影响, 达到提高天线隔离度的目的.数值仿真和实验结果表明:该天线在3.1~11 GHz频段内满足端口反射系数|S₁₁| < -10 dB, 隔离度|S₁₂|在7~11 GHz频段内小于-25 dB, 在3.1~7 GHz频段内小于-16 dB, 并根据仿真和测试S参数计算了包络相关系数.