A Study of Some Thermophysical Parameters in Glassy \mathrm{{Se}}_{80}\mathrm{{Te}}_{20} and \mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10} (Cd, In, and Sb) Alloys

The present paper reports a comparative study of some thermophysical properties (thermal conductivity, thermal diffusivity, thermal effusivity, and specific heat per unit volume) for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{20}$ Se 80 Te 20 and $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{M}}_{10}$ Se 80 Te 10 M 10 (Cd, In, and Sb) alloys. The transient plane source technique is used for this purpose. The thermal conductivity is highest for $\mathrm{{Se}}_{80}\mathrm{{Te}}_{10}\mathrm{{In}}_{10}$ Se 80 Te 10 In 10 as compared to the other ternary alloys. This is explained in terms of the thermal conductivity of additive elements Cd, In, and Sb. The composition dependence of the thermal diffusivity and specific heat per unit volume is also discussed.     

Theoretical Investigations on Electrocaloric Properties of \mathrm{PbZr}_{0.95}\mathrm{Ti}_{0.05}\mathrm{O}_{3} Thin Film

Based on a phenomenological model, the electrocaloric effect (ECE) accompanied with the ferroelectric-to-paraelectric phase transition in a PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film was investigated. The extracted data reveal many features of the ECE such as electrocaloric entropy changes, heat capacity changes, and temperature changes as functions of temperature due to different electric fields shifts. From the behavior of the PbZr $_{0.95}$ 0.95 Ti $_{0.05}$ 0.05 O $_{3}$ 3 thin film in phase transitions, it leads to a large change of heat capacity of 105.94 J  ${\cdot }\,$ · kg ${^{-1}}\,{\cdot }\,{^{\circ }}$ ? 1 · ° C, a temperature change of 22.44 K, and a relative cooling power of 1469 J  ${\cdot }$ ·  kg $^{-1}$ ? 1 .     

Study of Glass-Transition Kinetics of Pb-Modified Se_{80}In_{20} System by Using Non-isothermal Differential Scanning Calorimetry

Glass-transition kinetics of $\mathrm{Se}_{80}\mathrm{In}_{20-\mathrm{x}}\mathrm{Pb}_{\mathrm{x}}$ ( $x =$ 0, 5, 10, and 15) chalcogenide glasses have been carried out at different heating rates by using differential scanning calorimeter (DSC) under the non-isothermal condition. The glass-transition temperature $T_{\mathrm{g}}$ and peak glass-transition temperature $T_{\mathrm{pg}}$ have been determined from DSC thermograms. The reduced glass temperature $T_{\mathrm{rg}}$ , total relaxation time $\tau _{T_{g}}$ thermal-stability parameters $K^{l}$ and $S$ , the activation energy of glass transition $E_{\mathrm{g}}$ , the fragility index $F_{\mathrm{i}}$ , and the average coordination number $\langle Z\rangle $ have been calculated on the basis of the experimental results. The temperature differences $(T_{\mathrm{c}}-T_{\mathrm{g}}), K_{\mathrm{gl}}, K^{l}, S$ , and $E_{\mathrm{g}}$ are found to be maxima for $\mathrm{Se}_{80}\mathrm{In}_{10}\mathrm{Pb}_{10}$ glass. This indicates that $\mathrm{Se}_{80}\mathrm{In}_{10}\mathrm{Pb}_{10}$ glass has the highest thermal stability and glass-forming ability in the investigated compositional range. These results could be explained on the basis of modification of the chemical bond formation due to incorporation of Pb in the Se–In glassy matrix.     

Experimental Measurements of Thermophysical Properties of \mathrm{Al}_{2}\mathrm{O}_{3}– and \mathrm{TiO}_{2}–Ethylene Glycol Nanofluids

This paper presents measurements of the thermal conductivity and the dynamic viscosity of $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol and $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol (1 % to 3 % particle volume fraction) nanofluids carried out in the temperature range from $0\,^{\circ }$ 0 ° C to $50\,^{\circ }$ 50 ° C. The thermal-conductivity measurements were performed by using a transient hot-disk TPS 2500S apparatus instrumented with a 7577 probe (2.001 mm in radius) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The dynamic-viscosity measurements and the rheological analysis were carried out by a rotating disk type rheometer Haake Mars II instrumented with a single-cone probe (60 mm in diameter and $1^{\circ }$ 1 ° ) having a maximum uncertainty $(k=2)$ ( k = 2 ) lower than 5.0 % of the reading. The thermal-conductivity measurements of the tested nanofluids show a great sensitivity to particle volume fraction and a lower sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a thermal-conductivity enhancement (with respect to pure ethylene glycol) from 1 % to 19.5 % and from 9 % to 29 %, respectively. $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids exhibit Newtonian behavior in all the investigated temperature and particle volume fraction ranges. The relative viscosity shows a great sensitivity to the particle volume fraction and weak or no sensitivity to temperature: $\mathrm{TiO}_{2}$ TiO 2 –ethylene glycol and $\mathrm{Al}_{2}\mathrm{O}_{3}$ Al 2 O 3 –ethylene glycol nanofluids show a dynamic viscosity increase with respect to ethylene glycol from (4 to 5) % to 30 % and from 14 % to 50 %, respectively. Present experimental measurements were compared both with available measurements carried out by different researchers and computational models for thermophysical properties of nanofluids.     

Transfer Partial Molar Isentropic Compressibilities of (l-Alanine/l-Glutamine/Glycylglycine) from Water to 0.512 {\mathrm{mol}}\!\cdot \!{\mathrm{kg}}^{-1} Aqueous {\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\!\cdot \! {\mathrm{kg}}^{-1} Aqueous {\mathrm{K}}_{2}{\mathrm{SO}}_{4} Solutions Between 298.15 K and 323.15 K

Speeds of sound of (l-alanine/l-glutamine/glycylglycine $\,+\, 0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ + 0.512 mol · kg ? 1 aqueous ${\mathrm{KNO}}_{3}/0.512\, {\mathrm{mol}}\cdot {\mathrm{kg}}^{-1}$ KNO 3 / 0.512 mol · kg ? 1 aqueous ${\mathrm{K}}_{2}{\mathrm{SO}}_{4}$ K 2 SO 4 ) systems have been measured for several molal concentrations of amino acid/peptide at different temperatures: $T$ T = (298.15 to 323.15) K. Using the speed-of-sound and density data, the parameters, partial molar isentropic compressibilities $\phi _{\kappa }^{0}$ ? κ 0 and transfer partial molar isentropic compressibilities $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 , have been computed. The trends of variation of $\phi _{\kappa }^{0}$ ? κ 0 and $\Delta _{\mathrm{tr}} \phi _{\kappa }^{0}$ Δ tr ? κ 0 with changes in molal concentration of the solute and temperature have been discussed in terms of zwitterion–ion, zwitterion–water dipole, ion–water dipole, and ion–ion interactions operative in the systems.     

Elastic Properties of Monoclinic \hbox {ZrO}_{2} at Finite Temperatures Via First Principles

The structural and elastic properties of orthorhombic $\hbox {ZrO}_{2}\,(m\hbox {-ZrO}_{2})$ as a function of temperature are investigated by the generalized gradient approximation (GGA) correction scheme in the framework of density functional theory (DFT) and the quasi-harmonic Debye model. The thirteen independent elastic constants of $m\hbox {-ZrO}_{2}$ at temperatures to 3200 K are theoretically investigated for the first time. It is found that with increasing temperature, all elastic constants change, especially $C_{35}\hbox { and }C_{25}$ change rapidly in the temperature range of 1400 K to 1600 K and 2200 K to 2600 K, respectively. We also obtain the bulk modulus $B$ , shear modulus $G$ , Young’s moduli $E$ , as well as Poisson’s ratio $\sigma $ of $m\hbox {-ZrO}_{2}$ at high temperatures. Our work suggests that it is very important to predict the melting properties of materials via the elastic constants at temperatures.     

Molecular beam epitaxy of semipolar AlN(11\bar{2}2) and GaN(11\bar{2}2) on m-sapphire

We report on the plasma-assisted molecular-beam epitaxy of semipolar $\hbox{AlN}(11\bar{2}2)$ and GaN( $11\bar{2}2$ ) films on $(1\bar{1}00)$ m-plane sapphire. AlN deposited on m-sapphire settles into two main crystalline orientation domains, $\hbox{AlN}(11\bar{2}2)$ and $\hbox{AlN}(10\bar{1}0),$ whose ratio depends on the III/V ratio. Growth under moderate nitrogen-rich conditions enables to isolate the $(11\bar{2}2)$ orientation. The in-plane epitaxial relationships of $\hbox{AlN}(11\bar{2}2)$ on m-plane sapphire are $[11\bar{2}\bar{3}]_{\rm AlN} \vert \vert [0001]_{\rm sapphire}$ and $[1\bar{1}00]_{\rm AlN} \vert \vert [11\bar{2}0]_{\rm sapphire}.$ GaN deposited directly on m-sapphire results in ( $11\bar{2}2$ )-oriented layers with ( $10\bar{1}\bar{3}$ )-oriented inclusions. A ～100 nm-thick AlN( $11\bar{2}2$ ) buffer imposes the ( $11\bar{2}2$ )-orientation for the GaN layer grown on top. By studying the Ga-desorption on GaN( $11\bar{2}2$ ), we conclude that these optimal growth conditions corresponds to a Ga excess of one monolayer on the GaN( $11\bar{2}2$ ) surface.     

Specific Heat of K_{0.71}Na_{0.29}Fe_2As_2 at Very Low Temperatures

A commercially available calorimeter has been used to investigate the specific heat of a high-quality K $_{0.71}$ Na $_{0.29}$ Fe $_2$ As $_2$ single crystal. The addenda heat capacity of the calorimeter is determined in the temperature range $0.02 \, \mathrm{K} \le T \le 0.54 \, \mathrm{K}$ . The data of the K $_{0.71}$ Na $_{0.29}$ Fe $_2$ As $_2$ crystal imply the presence of a large $T^2$ contribution to the specific heat which gives evidence of $d$ -wave order parameter symmetry in the superconducting state. To improve the measurements, a novel design for a calorimeter with a paramagnetic temperature sensor is presented. It promises a temperature resolution of $\Delta T \approx 0.1 \, \mathrm{\mu K}$ and an addenda heat capacity less than $200 \, \mathrm{pJ/K}$ at $ T < 100 \, \mathrm{mK}$ .     

\text{ CO}_{2} Laser-Based Pulsed Photoacoustic Ammonia Detection

Detecting ammonia traces is relevant in health, manufacturing, and security areas, among others. As ammonia presents a strong absorption band (the $\nu _{2}$ mode) around 10  $\upmu $ m, some of the physical properties which may influence its detection by means of pulsed photoacoustic (PA) spectroscopy with a TEA $\text{ CO}_{2}$ laser have been studied. The characteristics of the ammonia molecule and the laser intensity may result in a nonlinear dependence of the PA signal amplitude on the laser fluence. Ammonia absorption can be described as a simple two-level system with power broadening. As $\text{ NH}_{3}$ is a polar molecule, it strongly undergoes adsorption phenomena in contact with different surfaces. Therefore, physical adsorption–desorption at the cell’s wall is studied. A theoretical model, based on Langmuir’s assumptions, fits well to the experimental results with stainless steel. Related to these studies, measurements led to the conclusion that, at the used fluenced values, dissociation by multiphotonic absorption at the 10P(32) laser line may be discarded. A calibration of the system was performed, and a detection limit around 190 ppb (at 224 $\text{ mJ}\cdot \text{ cm}^{-2}$ ) was achieved.     

Impact of Associated Gases on Equilibrium and Transport Properties of a \mathrm{CO}_{2} Stream: Molecular Simulation and Experimental Studies

During the various carbon dioxide capture and storage (CCS) stages, an accurate knowledge of thermodynamic properties of \(\mathrm{CO}_{2}\) streams is required for the correct sizing of plant units. The injected \(\mathrm{CO}_{2}\) streams are not pure and often contain small amounts of associated gaseous components such as \(\mathrm{O}_{2}, \mathrm{N}_{2}\) , \(\mathrm{SO}_{x}, \mathrm{NO}_{x}\) , noble gases, etc. In this work, the thermodynamic behavior and transport properties of some \(\mathrm{CO}_{2}\) -rich mixtures have been investigated using both experimental approaches and molecular simulation techniques such as Monte Carlo and molecular dynamics simulations. Using force fields available in the literature, we have validated the capability of molecular simulation techniques in predicting properties for pure compounds, binary mixtures, as well as multicomponent mixtures. These validations were performed on the basis of experimental data taken from the literature and the acquisition of new experimental data. As experimental data and simulation results were in good agreement, we proposed the use of simulation techniques to generate new pseudo-experimental data and to study the impact of associated gases on the properties of \(\mathrm{CO}_{2}\) streams. For instance, for a mixture containing 92.0 mol% of \(\mathrm{CO}_{2}\) , 4.0 mol% of \(\mathrm{O}_{2}\) , 3.7 mol% of Ar, and 0.3 mol% of \(\mathrm{N}_{2}\) , we have shown that the presence of associated gases leads to a decrease of 14 % and 21 % of the dense phase density and viscosity, respectively, as compared to pure \(\mathrm{CO}_{2}\) properties.     

Liquidus Temperatures and Thermodynamic Properties of the KCl–\mathrm{{KNO}}_{2}, NaCl–\mathrm{{NaNO}}_{2}, and \mathrm{{KNO}}_{2}–\mathrm {NaNO}_{2} Systems

Potassium nitrite is very sensitive to temperature, humidity, and the atmosphere, so few studies have been made in this field for the thermodynamic properties of molten salt with nitrite salt. In this article, the liquidus curves of NaCl– $\mathrm{{NaNO}}_{2}$ NaNO 2 , KCl– $\mathrm{{KNO}}_{2}$ KNO 2 , and $\mathrm {NaNO}_{2}$ NaNO 2 – $\mathrm{{KNO}}_{2}$ KNO 2 are calculated by a simple “hard-sphere” ionic interaction model. The calculated liquidus temperatures show good agreement with experimental values, which implies an ideal mixing enthalpy and entropy for the liquid binary systems. In addition to the phase equilibrium data and experimental thermochemical properties of molten salt systems, the activities of these binary systems are determined by the phase diagrams and the analytical integration of the classical Gibbs–Duhem equation.     

Photoacoustic Measurement of Thermal Properties of Co–Ni–Li Ferrite Nanoparticles

A simple home-made open photoacoustic cell is used for measuring some of the thermal properties of nanoparticles of $\mathrm{{Co}}_{0.5}\mathrm{{Ni}}_{0.5\text{-- }2{x}}\mathrm{{Li}}_x\text{ Fe }_{2+{x}}\mathrm{{O}}_{4}$ Co 0.5 Ni 0.5 -- 2 x Li x Fe 2 + x O 4 (with $x$ x ranging from 0.00 to 0.25 in steps of 0.05) prepared by the citrate precursor method. The influence of sintering temperatures on the thermal properties of a selected sample for $x=0.25$ x = 0.25 was also investigated. The thermal-diffusivity and thermal-effusivity measurements of the investigated samples are obtained by measuring the photoacoustic signal as a function of the modulated frequency depending on the existence of a reference sample. The thermal diffusivity of the as-prepared samples decreases as the $\mathrm{{Li}}^{1+}$ Li 1 + content increases except for the samples for $x=0.15$ x = 0.15 and $x=0.20$ x = 0.20 . These exceptions may be due to a better magnetic ordering in these samples leading to reduced phonon scattering and a higher thermal diffusivity. Finally, the thermal diffusivity of the sintered samples increases as the sintering temperature increases due to the increase in grain size.     

Thermal Conductivity of Standard Sands. Part III. Full Range of Saturation

The thermal conductivity $(\lambda )$ ( λ ) of three unsaturated standard quartz sands (Ottawa C-109 and C-190, and Toyoura) was measured by a transient thermal-conductivity probe, at room temperature of approximately $25\,^{\circ }\text{ C }$ 25 ° C and at loose and tight compactions. The measurements were carried out at different degrees of saturation $(S_\mathrm{r})$ ( S r ) from dryness to full saturation. In general, a sharp $\lambda $ λ increase was observed at low $S_\mathrm{r}$ S r , followed by a moderate rise until full saturation. However, experiments on loosely compacted C-190 samples revealed $\lambda $ λ deviation from a general trend ( $\lambda $ λ vs $S_\mathrm{r})$ S r ) caused by water percolation. Alternatively, successful experiments were carried out on loosely packed unsaturated C-190 samples using 1 % agar gel. For loosely compacted C-109 and Toyoura, $\lambda $ λ data obtained from 1 % agar gel closely agreed with $\lambda $ λ data for water as a saturation medium. The measured data were used to verify a model by de Vries for unsaturated soils. The model largely underestimates experimental data at $S_\mathrm{r}<0.5$ S r < 0.5 and produces an overall root-mean-square error of about $0.2\, \text{ W }~{\cdot }~\text{ m }^{-1}~{\cdot }~\text{ K }^{-1}$ 0.2 W · m ? 1 · K ? 1 . Measured $\lambda $ λ data agreed with data by a steady-state technique (a guarded hot-plate apparatus) at dryness and full saturation and exceeded the steady-state data in the unsaturated region. However, TCP data can be considered more reliable due to a lower temperature increase during $\lambda $ λ measurements and a shorter testing time. Consequently, in the case of unsaturated soils, evaporation and migration of water and steam can be avoided.     

Study of Structural Modification and Fluctuation Induced Electrical Conductivity in \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y}+x \text {BaSnO}_{3} Superconductor Composite

A series of \((1-x) \text {YBa}_{2}\text {Cu}_{3}\text {O}_{7-y} + x \text {BaSnO}_{3 }(x = 0.0, 0.1, 0.3, 0.5, 1.0, 2.5, 5.0\,\text {wt}{\%})\) samples were prepared using the solid-state reaction method. XRD graphs confirm the orthorhombic structure in pristine as well as in composite samples. Raman spectra show the presence of all the vibration modes in pure as well as in the composite samples. In addition, some defect-induced modes have also appeared in the higher weight % BSO-added sample, and no loss of apical oxygen O(4) at 500 cm \(^{-1}\) occurs due to BaSnO \(_{3}\) (BSO) addition. Microstructural analysis reveals the unchanged grain size with the incorporation of dielectric BSO particles in the YBCO matrix. Superconducting transition temperature determined from standard four-probe method decreases with the increase of BSO wt%. Excess conductivity fluctuation analysis using Aslamazov–Larkin model fitting reveals transition of two dominant regions (2D and 3D) above \(T_\mathrm{c}\) . 2D to 3D crossover temperature i.e. Lawrence–Doniach temperature that demarcates dimensional nature of fluctuation inside the grains is influenced by BSO incorporation in YBCO matrix.     

Magnetic Properties of Nanocrystalline Nickel–Cobalt Ferrites (\mathrm{Ni}_{1/2}{\mathrm{{Co}}}_{1/2}{\mathrm{{Fe}}}_{2}{\mathrm{O}}_{4})

In this study, the nanocrystalline nickel–cobalt ferrites $(\mathrm{Ni}_{1/2}\mathrm{Co}_{1/2}\mathrm{Fe}_{2}\mathrm{O}_{4})$ were prepared via the citrate route method at $27\,^{\circ }\mathrm{C}$ . The samples were calcined at $300\,^{\circ }\mathrm{C}$ for 3 h. The crystalline structure and the single-phase formations were confirmed by X-ray diffraction (XRD) measurements. Prepared materials showed the cubic spinel structure with m3m symmetry and Fd3m space group. The analyses of XRD patterns were carried out using POWD software. It gave an estimation of lattice constant “ $a$ ” of 8.3584 Å, which was in good agreement with the results reported in JCPDS file no. 742081. The crystal size of the prepared materials calculated by Scherer’s formula was 27.6 nm and the electrical conductivity was around $10^{-5}~\mathrm{S}\,\cdot \, \mathrm{m}^{-1}$ . The permeability component variations with frequency were realized. The magnetic properties of the prepared materials were analyzed by a vibrating sample magnetometer (VSM). It showed a saturation magnetization of $27.26\,\mathrm{emu} \cdot \mathrm{m}^{-1}$ and the behavior of a hard magnet.     

Investigation on the impact and compression behavior of wet \upgamma -\hbox {Al}_{2}\mathrm{O}_{3} granules

The material behavior of dominant elastic–plastic \(\upgamma \) - \(\hbox {Al}_{2}\mathrm{O}_{3}\) granules has been experimentally studied by means of quasi static compression tests and dynamic impact tests until fracture. The obtained distributions of breakage velocity and specific breakage energy are compared. Thus, velocity dependent influences at stressing like viscous behavior can be derived. Additionally, the influences of particle size and moisture content on the material behavior are investigated.     

Generalized Fundamental Equation of State for the Normal Alkanes (\hbox {C}_{5}{-}\hbox {C}_{50})

Based on the extended three-parameter corresponding-states principle and the most reliable experimental data of $n$ -alkanes, a generalized fundamental equation of state for technical calculations has been developed. This equation is in the form of the reduced Helmholtz free energy and takes the reduced density, reduced temperature, and acentric factor as variables. The proposed equation satisfies the critical conditions and Maxwell rule, shows correct behavior for the ideal curves and for the derivatives of the thermodynamic potentials, and allows the calculation of all thermodynamic properties including phase equilibrium of $n$ -alkanes from $n$ -pentane $(\hbox {C}_{5})$ to $n$ -pentacontane $(\hbox {C}_{50})$ over a temperature range from the triple point to 700 K with pressures up to 100 MPa. The new equation differs from the previous generalized equations of other authors by a wider range of variation of the acentric factor $\omega =0.25$ to 1.8, and by more accurately predicting thermal properties.     

Evidence for One-Gap Superconductivity in Mg(B_{1-x}C_{x})_{2} Single Crystals at x=0.132 by Point-Contact Spectroscopy

We report the results of directional point-contact measurements in Mg(B $_{1-x}$ C $_{x})_{2}$ single crystals. The amplitudes of the gaps, $\Delta_{\pi}$ and $\Delta_{\sigma}$ , were determined for each C content by fitting the experimental low-temperature normalized conductance curves of our “soft” point contacts with the BTK model generalized to the two-band case. We found that, on increasing the carbon content, $\Delta_{\sigma}$ decreases almost linearly with $T_{c}$ and $\Delta_{\pi}$ slightly increases until, at $x=0.132$ (where $T_{c}=19$ K), they assume the same value $\Delta =3.2 \pm 0.9$ meV. This result is confirmed by the temperature and magnetic-field dependence of the conductance curves at this C content, which do not show any evidence of two distinct gap values. In particular, the Δ versus T curve follows very well a standard BCS curve, with a gap ratio $2\Delta /k_{B} T_{c}=3.9$ . These experimental findings are compared to the theoretical predictions of the two-band model in the Eliashberg formulation.     

Fusion Diagrams in the \mathrm{BiBO}_{3}–\mathrm{YbBO}_{3} and \mathrm{Bi}_{4}\mathrm{B}_{2}\mathrm{O}_{9}–\mathrm{YbBO}_{3} Systems

A calculation model of the Gibbs energy of ternary oxide compounds from the binary components was used. Thermodynamic properties of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2}\mathrm{O}_{3}\) – \(\mathrm{B}_{2}\mathrm{O}_{3}\) ternary systems in the condensed state were calculated. Thermodynamic data of binary and ternary compounds were used to determine the stable sections. The probability of reactions between the corresponding components in the \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) system was estimated. Fusibility diagrams of systems \(\mathrm{BiBO}_{3}\) – \(\mathrm{YbBO}_{3}\) and \(\mathrm{Bi}_{4} \mathrm{B}_{2} \mathrm{O}_{9}\) – \(\mathrm{YbBO}_{3}\) were studied by physical–chemical analysis. The isothermal section of the phase diagram of \(\mathrm{Yb}_{2} \mathrm{O}_{3}\) – \(\mathrm{Bi}_{2} \mathrm{O}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) at 298 K is built, as well as the projection of the liquid surface of \(\mathrm{BiBO}_{3}\) – \(\mathrm{B}_{2} \mathrm{O}_{3}\) – \(\mathrm{YbBO}_{3}\) .     

Application of Non-Isothermal Thermogravimetric Method to Interpret the Decomposition Kinetics of \hbox {NaNO}_{3}, \hbox {KNO}_{3}, and \hbox {KClO}_{4}

The non-isothermal thermogravimetric method was used to study the thermal decomposition of \(\hbox {KClO}_{4}, \hbox {KNO}_{3}\) , and \(\hbox {NaNO}_{3}\) at heating rates of (5, 10, 15, and 20)  \(\hbox {K}\cdot \hbox {min}^{-1}\) . The activation energy of thermal decomposition reactions was computed by isoconversional methods of Ozawa–Flynn–Wall, Kissinger–Akahiro–Sunose, and Friedman equations. Also, the kinetic triplet of the thermal decomposition of salts was determined by the model-fitting method of the modified Coats–Redfern equation. The activation energies of \(\hbox {KClO}_{4}, \hbox {KNO}_{3}\) , and \(\hbox {NaNO}_{3}\) of (293 to 307, 160 to 209, and 192 to 245)  \(\hbox {kJ}\cdot \hbox {mol}^{-1}\) , respectively, are obtained by non–isothermal isoconversional methods. The modified Coats and Redfern method showed that the most probable mechanism functions \(g(\alpha )\) of \([-\hbox {ln}(1 - \alpha )]^{1/3}\) (model A3: Arami–Erofeev equation) and \((1 - \alpha )^{-1}- 1\) (model F2: second order) can be used to predict the decomposition mechanisms of \(\hbox {KClO}_{4}\) , \(\hbox {KNO}_{3}\) , and \(\hbox {NaNO}_{3}\) , respectively.