Effects of hydrogenation of fossil fuels with hydrogen and hydroxy gas on performance and emissions of internal combustion engines

Energy security is an important consideration for development of future transport fuels. Among the all gaseous fuels hydrogen or hydroxy (HHO) gas is considered to be one of the clean alternative fuels. Hydrogen is very flammable gas and storing and transporting of hydrogen gas safely is very difficult. Today, vehicles using pure hydrogen as fuel require stations with compressed or liquefied hydrogen stocks at high pressures from hydrogen production centres established with large investments.Different electrode design and different electrolytes have been tested to find the best electrode design and electrolyte for higher amount of HHO production using same electric energy. HHO is used as an additional fuel without storage tanks in the four strokes, 4-cylinder compression ignition engine and two-stroke, one-cylinder spark ignition engine without any structural changes. Later, previously developed commercially available dry cell HHO reactor used as a fuel additive to neat diesel fuel and biodiesel fuel mixtures. HHO gas is used to hydrogenate the compressed natural gas (CNG) and different amounts of HHO-CNG fuel mixtures are used in a pilot injection CI engine. Pure diesel fuel and diesel fuel + biodiesel mixtures with different volumetric flow rates are also used as pilot injection fuel in the test engine. The effects of HHO enrichment on engine performance and emissions in compression-ignition and spark-ignition engines have been examined in detail. It is found from the experiments that plate type reactor with NaOH produced more HHO gas with the same amount of catalyst and electric energy. All experimental results from Gasoline and Diesel Engines show that performance and exhaust emission values have improved with hydroxy gas addition to the fossil fuels except NO_x exhaust emissions. The maximum average improvements in terms of performance and emissions of the gasoline and the diesel engine are both graphically and numerically expressed in results and discussions. The maximum average improvements obtained for brake power, brake torque and BSFC values of the gasoline engine were 27%, 32.4% and 16.3%, respectively. Furthermore, maximum improvements in performance data obtained with the use of HHO enriched biodiesel fuel mixture in diesel engine were 8.31% for brake power, 7.1% for brake torque and 10% for BSFC.     

Using HHO (Hydroxy) and hydrogen enriched castor oil biodiesel in compression ignition engine

Hydrogen and HHO enriched biodiesel fuels have not been investigated extensively for compression ignition engine. This study investigated the performance and emissions characteristics of a diesel engine fueled with hydrogen or HHO enriched Castor oil methyl ester (CME)-diesel blends. The production and blending of CME was carried out with a 20% volumetric ratio (CME20) using diesel fuel. In addition, the enrichment of intake air was carried out using pure HHO or hydrogen through the intake manifold with no structural changes – with the exception of the reduction of the amount of diesel fuel – for a naturally aspirated, four cylinder diesel engine with a volume of 3.6 L. Hydrogen amount was kept constant with a ratio of 10 L/min throughout the experiments. Engine performance parameters, including Brake Power, Brake Torque, Brake Specific Fuel Consumption and exhaust emissions – including NOx and CO, – were tested at engine speeds between 1200 and 2600 rpm. It is seen that HHO enriched CME has better results compared to pure hydrogen enrichment to CME. An average improvement of 4.3% with HHO enriched CME20 was found compared to diesel fuel results while pure hydrogen enriched CME20 fuel resulted with an average increase of 2.6%. Also, it was found that the addition of pure hydrogen to CME had a positive effect on exhaust gas emissions compared to that adding HHO. The effects of both enriched fuels on the engine performance were minimal compared to that of diesel fuel. However, the improvements on exhaust gas emissions were significant.     

Effect of hydroxy gas enrichment on vibration,noise and combustion characteristics of a diesel engine fueled with Foeniculum vulgare oil biodiesel and diesel fuel

Gaseous fuels can be used in diesel engines to improve combustion and obtain more favorable emission. Vibration and noise formation in diesel engines is a rather complex phenomenon which is created during combustion of fuels and leads to a reduction in vehicle comfort. Although there are studies in the literature that examine the noise and vibration of the diesel engine using different biofuels, there is no study that thoroughly examines the effect of combined utilization of Foeniculum vulgare oil biodiesel (FVB) and hydroxy gas (HHO) on vibration, noise and combustion characteristics. Therefore, this study aimed to explore the effects of FVB, a promising biodiesel feedstock, and HHO dual fuel operation on vibration, noise and exhaust emissions of a diesel engine. The vibration, noise and emission data obtained by the use of diesel fuel were taken as a reference and the effects of FVB and HHO mixture utilization on vibration, noise and emission formation were examined. The results show that the total vibration and noise generated by the engine was decreased by the use of FVB. In addition, the utilization of HHO together with biodiesel further reduced the engine vibration and noise according to experimental data. According to exhaust emission formation measurements, the minimum carbon monoxide values were obtained when the engine was fueled with HHO and FVB mixtures. However, CO₂ and NO_X emissions increased with the combination of HHO and FVB usage.     

A modified diesel engine for natural gas operation: Performance and emission tests

A diesel engine was modified for natural gas operation to optimize performance using gaseous fuel. A variation of combustion ratios (CR) including 9.0:1, 9.5:1, 10.0:1 and 10.5:1 was utilized to evaluate engine performance and emissions from the same engine over the engine speeds between 1000 and 4000 rpm. Tested engine performance parameters include brake torque, brake power, specific fuel consumption (SFC) and brake thermal efficiency. Emissions tests recorded total hydrocarbon (THC), nitrogen oxides (NO_x) and carbon monoxide (CO). The results showed that a CR of 9.5:1 had the highest thermal efficiency and the lowest SFC while a CR of 10:1 showed a high torque at low speed. THC emissions were directly proportional to the CR. NO_x emissions increased with increasing CR and then declined after a CR of 10:1.     

Evaluation of vibration characteristics of a hydroxyl (HHO) gas generator installed diesel engine fuelled with different diesel–biodiesel blends

There are two main reasons of alternative fuel search of scientists: environmental problems resulted from combustion of fossil fuels and limited reserves of crude oil. Biodiesel and Hydrogen (H₂) are two of the most promising alternative fuels with their environmental friendly combustion profiles. The aim of this study was to evaluate vibration level of a hydroxyl (HHO) gas generator installed and diesel engine using different kinds of biodiesel fuels. In this study, at different flow rates, the effect of HHO gas addition on engine vibration performance was investigated with a Mitsubishi Canter 4D34-2A diesel engine. HHO gas introduced to the test engine via its intake manifold with 2, 4 and 6 L per minute (LPM) flow rates when the engine was fuelled with sunflower, canola, and corn biodiesels. The vibration data was collected between 1200 and 2400 rpm engine speeds by 300 rpm intervals. Finally, artificial neural network (ANN) approach was conducted in order to predict the effect of fuel properties and HHO amount on engine vibration level.     

Impact of HHO produced from dry and wet cell electrolyzers on diesel engine performance,emissions and combustion characteristics

Water electrolysis produces HHO gas by using sodium hydroxide catalyst. Dry and wet cells designs are applied producing the gas flow rates at 0.5 and 0.75 LPM, respectively. Tests are done in a diesel engine at engine speed variation and full load. Performance, combustion characteristics and emissions investigations of diesel engines using HHO gas from dry and wet cells are performed. HHO gas addition enhances the brake thermal efficiency by 2 and 2.5% but the exhaust gas temperature highest decreases for dry and wet cells are 8 and 10%, respectively about diesel oil. The maximum decreases are evaluated as for CO (15, 22%), HC (31, 39%), NO_x (35, 42%) and smoke emissions (25, 35%), respectively for dry and wet cells about diesel fuel. The improvements in cylinder pressures are 5 and 10%, respectively and the heat release rate enhancements are 4.5 and 6.5%, respectively about pure diesel for dry and wet configurations.     

A novel application of pulse width modulation technique on hydroxy gas production

Software and hardware advancements on a hydroxy gas (HHO) production system is presented in this experimental study. A unique control system that enables to generate hydroxy gas at the specified volumetric flow rates with pulse width modulation (PWM) technique is developed and manufactured. The novelty of the method is automatic control of the hydroxy production according to the instantaneous demand, in other words, the adaptation of the HHO system to the operating principles of internal combustion engines (ICEs). A stepping motor represented the vehicle engine in order to get variable rotational speed values. The instantaneous rotation speed range of the motor divided into four sections as no rotation, low (1000–2001 rpm), middle (2001–4001 rpm) and high (>4001 rpm). A computer-driven microcontroller (MCU) card managed the entire system. The MCU card received motor speed input parameters and identified the PWM signal. Results of the study which are the electrical current, hydroxy gas flow and dry cell temperature ranges are presented in tables and graphs. The measured experimental data were 0–15 A, 0–1.56 L per minute and 24–48 °C for electrical current, hydroxy gas production and dry cell temperature ranges, respectively.     

Using renewable alternative fuels and studying their impact on the performance and emissions of compression ignition engines

This practical study examined the effect of engine torque on engine performance and emissions. The most important parameters of engine performance are thermal efficiency, brake power (BP), and specific fuel consumption. As for exhaust emissions, the most important of which are hydrocarbons (HCs), carbon monoxide (CO), and nitrogen oxides (NO_x). The experiment was conducted for a single-cylinder, four-stroke compression ignition engine. Mixtures (B0, B10, B20, B30, and B40) were taken from biodiesel prepared from sunflower oil by the esterification method. The engine speed was fixed at 1700 rpm, and torque variable was from 0 to 10 N m. The results indicated a decrease in engine BP by an average of 19.5 W, a decrease in thermal efficiency by an average of 1.058%, while an increase in fuel consumption by an average of 0.095 kg/kW h⁻¹ compared to diesel. As for exhaust emissions, HC emissions decreased by 5.8 ppm, while CO decreased by 0.0207%, and NO_x emissions increased by 138.5 ppm compared to diesel, due to changes in the properties of biodiesel, such as high density, viscosity, and low calorific value compared to the properties of regular diesel     

Optimisation of dry cell electrolyser and hydroxy gas production to utilise in a diesel engine operated with blends of orange peel oil in dual-fuel mode

This study aims at producing hydroxy (HHO) gas using a dry cell electrolysis setup and utilising it along with orange oil in a diesel engine. First an electrolyser was designed considering the optimised values of the material (SS316L), electrolyte (NaOH), and electrode gap (2 mm). Then the biodiesel obtained from the waste orange peels, after transesterification, were blended with diesel at 25 and 50% by vol. The HHO gas was produced by the water electrolysis method by a plate-type electrolyser having a maximum production rate of 2.5 LPM with NaOH as the electrolyte. HHO gas was inducted through the inlet manifold along with the fresh air at a constant rate of 2 LPM with both the biodiesel blends. The performance, emission, and combustion outcomes of the single cylinder diesel engine for different load conditions (0–100%) were tested for all the blends with and without HHO addition. The results showed a considerable increase in brake thermal efficiency of 1.54% at full load condition, with a noticeable decrease in fuel consumption by 11.1% compared to conventional diesel fuel, was achieved for the O25 blend with HHO induction. Moreover, emissions like hydrocarbon, carbon monoxide and smoke were reduced by 17.6, 29.5, and 12.1%, respectively. However, the improvement in combustion outcomes led to the increase in nitrogen oxides emission by 9.67%. This study helped to understand the production process of HHO gas by dry cell electrolyser and its effect on the blend of orange oil methyl ester and diesel in dual-fuel mode.     

Impact of HHO gas enrichment and high purity biodiesel on the performance of a 315 cc diesel engine

Biodiesel and oxyhydrogen (HHO) gas have shown promising results in improving engine performance and emissions. In this work, the effects of HHO gas and 5% biodiesel blends (B5) and their combined use in a 315 cc diesel engine have been analyzed. Biodiesel is produced by base catalyzed transesterification and cleaned by emulsification. Its calculated cetane index (CCI) was 61.4. HHO gas is produced from electrolysis of concentrated potassium hydroxide solution. The use of 5% biodiesel blend resulted in a significant rise of 9.4% in the brake thermal efficiency (BTE) and a maximum reduction of 8.19% in the brake specific fuel consumption (BSFC). HHO enrichment of diesel and biodiesel at 2.81 L/min through the intake manifold improved the torque and power by an average of over 3%. HHO addition also improved the BTE of diesel by a maximum of 3.67%. The combination of high CCI biodiesel fuel and HHO creates a mixture that has shortened the ignition delay (ID) to the point that adverse effects were observed due to the premature combustion as shown by the average decrease in the BTE of 2.97% compared to B5. Thus, B5, on its own, is found to be the optimum fuel under these conditions.     

Effects of oxyhydrogen on the CI engine fueled with the biodiesel blends: A performance,combustion and emission characteristics study

The main purpose of this study is to analyse the effects of oxy hydrogen (HHO) along with the Moringa oleifera biodiesel blend on engine performance, combustion and emission characteristics. HHO gases were generated using the typical electrolysis process using the potassium hydroxide solution. The experiments were performed under various engine loads of 25%, 50%, 75%, and 100% in a constant speed engine. Biodiesel from the M. oleifera was prepared by the transesterification process. Further, the procured biodiesel blends mixed with neat diesel at the concentration of 20% (B20) and 40% (B40). In addition to above, the HHO gas flow rate to the engine chamber maintained at the flow rate of 0.5 L^-1. The use of the 20% and 40% blends with HHO reported less BTE compared to the neat diesel. However, B20 reported marginal rise in the BTE due to the addition of the HHO gas. On the other hand, addition of HHO gas to the blends significantly dropped the brake specific fuel consumption. With regard to the emissions, addition of the biodiesel blends reduced the concentration of the CO, HC, and CO₂. Nevertheless, no reduction reported in the formation of the NO. However, adding the HHO to the biodiesel reduced the average NOx by 6%, which is a substantial effect. Overall, HHO enriching biodiesel blends are the potential replacement for the existing fossil fuels for its superior fuel properties compared to the conventional diesel.     

An experimental investigation of the impact of added HHO gas on automotive emissions under idle conditions

The paper describes an experiment aimed at specifying the effects of adding Brown's gas (HHO gas) in automotive engines operating at idle speed. HHO gas was obtained from the author's parallel plate generator with a single central anode and two side cathodes separated by six neutral plates. The generator was powered by an external power source (power supply unit) and produced a constant HHO gas flow rate in the experiment. The so obtained HHO gas was added to the engine intake systems of 5 passenger cars – three SI engines, i.e. Fiat Cinquecento, Renault Twingo, and Opel Corsa and two CI engines, i.e. Skoda Octavia and Opel Combo. The engines operated in idling conditions. The MAHA MGT5 analyzer measured the concentrations of CO, HC, NOx in the exhaust gases of those cars first fueled by stock fuel (SF) only and then with added HHO gas, i.e. SF + HHO. The ambient conditions remained constant.The results show that fueling with an HHO gas additive has an impact on emissions: CO and HC concentrations in the exhaust gases were reduced in the most of the cases; NOx concentration was reduced in the SI engines but increased in the Diesel ones. Adding HHO gas to the engine intake system of the Fiat Cinquecento operating at idle slightly deteriorated the combustion process there (the impact of carburetor-based supply without feedback). Although HC concentration was lower by 24%, the amount of CO increased by 34% and nitrogen oxides hardly changed. CO concentration if any decreased in the other vehicles.The concentration of HC in the exhaust gases of each of the vehicles show that adding HHO gas to the original fuel, regardless of fueling methods and techniques, reduces the concentration of unburned hydrocarbons: by more than 20% in the Fiat and by about 40% in the others. The NOx concentration in the exhaust gases of each of the vehicles show that after adding HHO to the original fuel, the amount of NOx depends on a fueling method. In the SI engines with indirect injection, adding HHO gas to the intake system reduced the NOx concentration. In the Fiat with a carburetor without feedback, the NOx concentration remained practically unchanged but it increased in the CI engines if HHO gas was added to their intake systems.     

Comparative study on combustion and emission of SI engine blended with HHO by different injection modes of gasoline

As a hydrogen fuel for real-time production without storage, HHO has great research prospect and significance. In this paper, we conducted experiments on a spark ignition (SI) engine which has two independent fuel supply systems to compare two combination modes of gasoline port injection plus HHO (GPI + HHO) and gasoline direct injection plus HHO (GDI + HHO) at different HHO flow rate, λ, engine speed and load. The results show that, in both modes, HHO addition increases the maximum cylinder pressure and torque. With the increase of HHO flow rate, the flame development period and flame propagation period shorten, the crank angle corresponding to the maximum cylinder pressure is closer to top dead center. In addition, GDI + HHO mode has better engine performance. HHO has a significant effect on improving combustion stability. Especially at λ = 1.4, as HHO flow rate increases from 0 to 16 L/min, the coefficient of indicated mean effective pressure variation of GPI + HHO and GDI + HHO mode decreases by 69.17% and 58.29%, respectively. Moreover, HHO addition improves HC and CO emissions but increases NOx emissions. CO and HC emissions of GDI + HHO mode are the lowest under all conditions, and reaching the lowest value when HHO flow rate = 16 L/min. Besides, GDI + HHO mode not only has lower NO emissions under normal working conditions (λ = 1) but also can maintain a better combustion environment under lean-burn conditions (λ = 1.2, 1.4). In general, the application of HHO as fuel in engine can improve combustion and emission characteristics and GDI + HHO mode is the best combination of gasoline and HHO.     

Combustion characteristics of CI engine fueled with WCO biodiesel/diesel blends at different compression ratios and EGR

The present study investigated the effect of compression ratio (CR) with the use of exhaust gas recirculation (EGR) technology on the performance of combustion characteristics at different CRs and engine loads; the brake thermal efficiency (BTE), specific fuel consumption (SFC), volumetric efficiency (VOL.EFF), exhaust gas temperature, carbon dioxide emission (CO₂), hydrocarbons (HC), nitrogen oxides (NOx), and oxygen content (O₂). The single-cylinder, four-stroke compression ignition engine was run on a mixture of diesel and biodiesel prepared from Iraqi waste cooking oil at (B0, B10, B20, and B30). A comparison has been achieved for these combustion characteristics at different blends, load, and CRs (14.5, 15.5, and 16.5) at 1500 rpm constant engine speed. The transesterification process is used to produce biodiesel and ASTM standards have been used to determine the physical and chemical properties of biodiesel and compare them to net diesel fuel. The preliminary conducting tests indicated that engine performance and emissions improved with the B20 mixture. Experimental test results showed an increase in BTE when CR increased by 17% and SFC increased by 23%. It also found a higher VOL.EFF by 6% at higher pressure ratios. A continuous decrease in BTE values and an increase in SFC were sustained when the percentage of biodiesel in the mixture was increased. Emissions of carbon dioxide, HC, and NOx increased by 12%, 50%, and 40%, respectively, as CR reached high values. NOx increased with the addition of biodiesel to 35%, which necessitated the use of EGR technology at rates of 5% and 10%. The results indicated that the best results were obtained in the case of running the engine with a mixing ratio of B20 with the addition of 10% EGR, NOx decreased by 47% against a slight increase in other emissions.     

Experimental and numerical investigation of effects of CNG and gasoline fuels on engine performance and emissions in a dual sequential spark ignition engine

Compared to widening usage of CNG in commercial gasoline engines, insufficient but increasing number of studies have appeared in open literature during last decades while engine characteristics need to be quantified in exact numbers for each specific fuel converted engine. In this study, a dual sequential spark ignition engine (Honda L13A4 i-DSI) is tested separately either with gasoline or CNG at wide open throttle. This specific engine has unique features of dual sequential ignition with variable timing, asymmetrical combustion chamber, and diagonally positioned dual spark-plug. Thus, the engine led some important engine technologies of VTEC and VVT. Tests are performed by varying the engine speed from 1500 rpm to 4000 rpm with an increment of 500 rpm. The engine’s maximum torque speed of 2800 rpm is also tested. For gasoline and CNG fuels, engine performance (brake torque, brake power, brake specific fuel consumption, brake mean effective pressure), emissions (O₂, CO₂, CO, HC, NO_x, and lambda), and the exhaust gas temperature are evaluated. In addition, numerical engine analyses are performed by constructing a 1-D model for the entire test rig and the engine by using Ricardo-Wave software. In the 1-D engine model, same test parameters are analyzed, and same test outputs are calculated. Thus, the test and the 1-D engine model are employed to quantify the effects of gasoline and CNG fuels on the engine performance and emissions for a unique engine. In general, all test and model results show similar and close trends. Results for the tested commercial engine show that CNG operation decreases the brake torque (12.7%), the brake power (12.4%), the brake mean effective pressure (12.8%), the brake specific fuel consumption (16.5%), the CO₂ emission (12.1%), the CO emission (89.7%). The HC emission for CNG is much lower than gasoline. The O₂ emission for CNG is approximately 55.4% higher than gasoline. The NO_x emission for CNG at high speeds is higher than gasoline. The variation percentages are the averages of the considered speed range from 1500 rpm to 4000 rpm.     

Enhancing compression ignition engine performance using biodiesel/diesel blends and HHO gas

The proposed experimental study aims to investigate the effect of adding HHO gas with a constant flowrate (50% of the engine capacity) on the thermal efficiency for six different Biodiesel/diesel blends, which are 0B, 10B, 15%B, 20B, 25B and 30B. For all the studied fuelling scenarios, it was decided to mix HHO gas with the inlet air perpendicularly on the air streamline by a constant flowrate aiming to enhance the thermal efficiency of the engine. The study assumed maintain the rotational speed of the engine is constant (four different speeds) while varying the engine torque. The experimental results were recorded for four different rotational speeds of the engine, which are 1500, 1750, 2000 and 2250 RPM. Obtained results investigated that, increasing biodiesel content resulted in reducing the engine's brake thermal efficiency and increasing its brake specific fuel consumption due to the relatively lower heat content of the biodiesel comparing with conventional diesel. Adding HHO gas to the engine resulted in enhancing the thermal efficiency due to its high heat content and it was observed that; 20B with HHO gas supply provided the highest brake thermal efficiency of the engine as well as reducing its brake specific fuel consumption.     

Experimental study of the effect of HHO gas injection on pollutants produced by a diesel engine at idle speed

In this study, with the aim of reducing the energy consumption in the production of HHO gas for use in the combustion process of diesel fuel, different modes of gas production were investigated using electrolyzers. According to previous studies, the energy consumption rate of the electrolyzer to produce a high volumetric flow of HHO gas is very high. This high rate will restrict the use of equipment such as high-capacity batteries. The effects of HHO gas injection at the idle speed of the engine at a low temperature were evaluated. Because in this situation, the engine makes high air pollution. The results showed that the percentage of CO, CO2, HC, and NOX gases decreased by 66%, 33%, 38%, and 11%, respectively. On the other hand, the amount of O2 gas in the exhaust increased by 18%. These results were reported for HHO gas injection from 10 to 45 ml/s. The performance of Group Method of Data Handling (GMDH) neural network was desirable in modeling diesel engine pollutants. Because the Root-Mean-Square Error (RMSE) criterion for all evaluated gases is less than 0.32. The GMDH neural network was used for modeling the operation of the diesel engine with HHO supplemental fuel. The GMDH results showed that this artificial network can measure all engine exhaust gases. It can be used as a sensor and virtual simulator for this diesel engine with HHO supplemental fuel.     

Characterization of the hydroxy fueled compression ignition engine under dual fuel mode: Experimental and numerical simulation

This study investigates the characterization of the hydroxy-diesel fueled compression ignition engine under dual fuel (DF) mode on a stationary modified engine. Hydroxy gas (HHO) is supplied along with diesel at three different flow rates of 0.25, 0.50, and 0.75 lpm. A significant reduction in emission parameters was obtained in carbon monoxide, unburnt hydrocarbon and smoke emission as ~58%, ~60%, and ~49%, respectively under the DF mode (at 0.75 lpm HHO and 10 kg load). However, a slight increment in nitrogen oxides (NO_X) emission is observed due to the O₂ contents in HHO gas. It increases the reaction temperature and results in increasing the NO_X emission. The brake thermal efficiency and brake specific energy consumption also improved and found to be ~6.5% and ~6% at the optimized condition. Combustion analysis shows the rate of pressure rise increased due to quicker combustion and decreased combustion duration. A numerical simulation has been performed to optimize the engine load and HHO flow rate using the Hybrid Entropy-VIKOR technique. In addition, a good agreement has been found between simulation and experimental values for performance and emission parameters. The results can be further improved by optimizing the engine operating parameters, i.e., injection pressure, compression ratio, and injection timing in the near future. Overall it can be concluded the HHO can be considered as a prominent alternative fuel for the CI engine with increased efficiency and lower emissions.     

Comparative engine performance and emission analysis of CNG and gasoline in a retrofitted car engine

A comparative analysis is being performed of the engine performance and exhaust emission on a gasoline and compressed natural gas (CNG) fueled retrofitted spark ignition car engine. A new 1.6 L, 4-cylinder petrol engine was converted to the computer incorporated bi-fuel system which operated with either gasoline or CNG using an electronically controlled solenoid actuated valve mechanism. The engine brake power, brake specific fuel consumption, brake thermal efficiency, exhaust gas temperature and exhaust emissions (unburnt hydrocarbon, carbon mono-oxide, oxygen and carbon dioxides) were measured over a range of speed variations at 50% and 80% throttle positions through a computer based data acquisition and control system. Comparative analysis of the experimental results showed 19.25% and 10.86% reduction in brake power and 15.96% and 14.68% reduction in brake specific fuel consumption (BSFC) at 50% and 80% throttle positions respectively while the engine was fueled with CNG compared to that with the gasoline. Whereas, the retrofitted engine produced 1.6% higher brake thermal efficiency and 24.21% higher exhaust gas temperature at 80% throttle had produced an average of 40.84% higher NO_x emission over the speed range of 1500–5500 rpm at 80% throttle. Other emission contents (unburnt HC, CO, O₂ and CO₂) were significantly lower than those of the gasoline emissions.     

Evaluating combustion,performance and emission characteristics of diesel engine using karanja oil methyl ester biodiesel blends enriched with HHO gas

With a specific end goal to take care of the worldwide demand for energy, a broad research is done to create alternative and cost effective fuel. The fundamental goal of this examination is to investigate the combustion, performance and emission characteristics of diesel engine using biodiesel blends enriched with HHO gas. The biodiesel blends are gotten by blending KOME obtained from transesterification of karanja oil in various proportions with neat diesel. The HHO gas is produced by the electrolysis of water in the presence of sodium bicarbonate electrolyte. The constant flow of HHO gas accompanied with biodiesel guarantees lessened brake specific fuel consumption by 2.41% at no load and 17.53% at full load with increased the brake thermal efficiency by 2.61% at no load and 21.67% at full load contrasted with neat diesel operation. Noteworthy decline in unburned hydrocarbon, carbon monoxide, carbon-dioxide emissions and particulate matter with the exception of NO_x discharge is encountered. The addition of EGR controls this hike in NO_x with a slight decline in the performance characteristics. It is clear that the addition of HHO gas with biodiesel blends along with EGR in the test engine improved the overall characterization of engine.