扫描隧道探针的制备研究

本文概述针尖对扫描隧道显微镜的重要性,总结制备探针的各种技术,并着重介绍电化学腐蚀制备钨和铂铱合金探针的原理及电路设计。     

Large-area profile measurement of sinusoidal freeform surfaces using a new prototype scanning tunneling microscopy

This paper presents large-area profile measurement of ultra-precision diamond turned sinusoidal surfaces by using a specially developed scanning tunneling microscopy (STM). The new prototype of STM system employs a long stroke PZT servo actuator as the Z-directional scanner, an integrated capacitance displacement sensor to accurately measure the Z-directional profile height, a motorized stage with long traveling stroke for carrying out large-area scanning. A simple method for self-calibration of the inevitable sample tilt is proposed in order to achieve large-area measurement without tip-crashing or losing of tip-sample interaction. Several types of ultra-precision machined sinusoidal freeform surfaces with different geometrical parameters are measured by the new STM system over large scanning areas at the scale of millimeters. Specially, a sinusoidal surface with peak-valley amplitude of 22 μm and periodical wavelength of 550 μm is successfully measured and imaged by the STM system. The measurement repeatability error, repeatability standard deviation and measured profile deviation are also evaluated. It is confirmed that the new STM system is capable of carrying out large-area as well as large-amplitude measurement of the ultra-precision machined sinusoidal surfaces.     

Observation of removal of an Fmoc protecting group by scanning tunneling microscopy

We demonstrate here by imaging successive surface reactions in self-assembled monolayers (SAMs) on Au(1 1 1) at molecular scale with a scanning tunneling microscope (STM): (i) SAM matrices formation with 1-octanethiol on Au(1 1 1) in ethanol, (ii) insertion of N-Fmoc-aminooctanethiol into the SAM matrices in ethanol, and (iii) removal of the Fmoc protecting group with tris(2-aminoethyl)amine (TAEA). The total reaction is formation of SAMs containing a small amount of NH₂ terminated molecules in the CH₃ terminated SAM matrices. After the reaction of the protecting group with TAEA, STM imaging revealed the decrease in heights of the inserted molecules on average. We attributed this observation to removal of the protecting group by taking account of a convolution of electronic and topographic contributions to observed STM heights. Apparent areas of the terminal groups, however, became larger on removal. The increase in the areas was attributed to water adsorption to the NH₂ terminal group under air.     

Scanning tunneling microscopy of Fe- and O-sublattices on Fe3O4(100)

We present scanning tunneling microscopy of an octahedral (B) plane terminated (square root of 2 x square root of 2) R45 degrees-reconstructed surface of a natural magnetite (100) crystal. Implementing a W-tip we achieve the same resolution on Fe rows as was reported in the past either with the use of antiferromagnetic tips or on magnetite (Fe3O4) films. We show images of Fe or O sublattices of Fe3O4 with atomic resolution.     

Nanoscopic observation of a gold nanoparticle-conjugated protein using near-field scanning optical microscopy

This study describes a single gold nanoparticle (AuNP)-based observation of biomolecular interaction using a near-field scanning microscope (NSOM) in transmission mode. To observe streptavidin molecules, a glass surface was first patterned with a micro-scale line of (3-aminopropyl)trimethoxysilane (APTMS) by micro-contact printing (μCP) with a subsequent reaction of N-hydroxysuccinimide (NHS)-biotin. The AuNP-conjugated streptavidin was then applied to the biotin-modified glass surface and NSOM was employed to detect the resulting specific interaction between streptavidin and biotin on the glass surface. Using the optical and topological images generated from the NSOM analysis, the interaction could be observed at the nanoscopic scale. This study demonstrates that the NSOM is a powerful tool for the detection of protein interactions at the nanoscopic level when the protein is conjugated with AuNPs.     

Molecular recognition of DNA–protein complexes: A straightforward method combining scanning force and fluorescence microscopy

Combining scanning force and fluorescent microscopy allows simultaneous identification of labeled biomolecules and analysis of their nanometer level architectural arrangement. Fluorescent polystyrene nano-spheres were used as reliable objects for alignment of optical and topographic images. This allowed the precise localization of different fluorescence particles within complex molecular assemblies whose structure was mapped in nanometer detail topography. Our experiments reveal the versatility of this method for analysis of proteins and protein–DNA complexes.     

Observation of rhombic facets on platinum wire after heating in air using scanning tunnelling microscopy

Evidence is provided for the formation of surface faceting due to heating in air at 1160 K. For the first time diamond-shaped facets with angles of 60 and 120° have been observed on the surface of a sample of ultrapure platinum wire in air using scanning tunnelling microscopy. The maximum extension of the facets is about 1000 Å.     

Well-ordered structure of methylene blue monolayers on Au(111) surface: electrochemical scanning tunneling microscopy studies

Well-ordered structure of methylene blue (MB) monolayers on Au(111) surface has been successfully obtained by controlling the substrate potential. Electrochemical scanning tunneling microscopy (ECSTM) examined the monolayers of MB on Au(111) in 0.1 M HClO(4) and showed long-range ordered, interweaved arrays of MB with quadratic symmetry on the substrate in the potential range of double-layer charging. High-resolution ECSTM image further revealed the details of the MB monolayers structure of c(5 x 5 radical 3)rect and the flat-lying orientation of ad-molecules. The dependence of molecular organization on the substrate potential and the formation mechanism of well-ordered structure on Au(111) surface were investigated in detail. The obtained well-ordered structure at the interface between a metal and an aqueous electrolyte might possibly be used as high-density device for signal memory and templates for the advanced nanopatterning of surfaces.     

Air-drying of human leucocytes for scanning electron microscopy using the GTGO procedure

The utilization of tannic acid and guanidine hydrochloride as mordants for better osmium binding has been shown to serve as an excellent alternative to metal coating of organ tissue specimens for scanning electron microscopy (SEM). The present report describes the GTGO procedure, a modification of the TAO technique introduced by Murakami et al. (1977, 1978), which we have found successful for the preparation of air dried peripheral blood leucocytes for SEM studies. Air dried, GTGO-treated leucocytes show excellent preservation of surface features with minimal cell shrinkage. When critical point dried, GTGO-treated cells are examined, they also show less shrinkage than cells prepared with standard glutaraldehyde fixation and critical point drying. The potential application of this air drying procedure (GTGO-AD) to other soft biological specimens is currently under investigation. This technique is recommended as a new and effective air drying procedure for the successful preparation of cells for SEM.     

Adlayer structure of octa-alkoxy-substituted copper(II) phthalocyanine on Au(111) by electrochemical scanning tunneling microscopy

Electrochemical scanning tunneling microscopy (ECSTM) has been used to examine the adlayer of octa-alkoxy-substituted copper(II) phthalocyanines (CuPc(OC(8)H(17))(8)) on Au(111) in 0.1 M HClO(4), where the molecular adlayer was prepared by spontaneous adsorption from a benzene solution containing this molecule. Topography STM scans revealed long-range ordered, interweaved arrays of CuPc(OC(8)H(17))(8) with coexistent rectangular and hexagonal symmetries. High-quality STM molecular resolution yielded the internal molecular structure and the orientation of CuPc(OC(8)H(17))(8) admolecules. These STM results could shed insight into the method of generating ordered molecular assemblies of phthalocyanine molecules with long-chained substitutes on metal surface.