Multi-scale simulations of field ion microscopy images--image compression with and without the tip shank

Multi-scale simulations of field ion microscopy images of faceted and hemispherical samples are performed using a 3D model. It is shown that faceted crystals have compressed images even in cases with no shank. The presence of the shank increases the compression of images of faceted crystals quantitatively in the same way as for hemispherical samples. It is hereby proven that the shank does not influence significantly the local, relative variations of the magnification caused by the atomic-scale structure of the sample.     

Snow metamorphism as revealed by scanning electron microscopy

Current theories of snow metamorphism indicate that sublimating snow crystals have rounded shapes, while growing crystals have shapes that depend on growth rates. At slow growth rates, crystals are rounded. At moderate rates, they have flat faces with rounded edges. At fast growth rates, crystals have flat faces with sharp edges, and they have hollow faces at very fast growth rates. The main growth/sublimation mechanism is thought to be by the homogeneous nucleation of new layers at or near crystal edges. It was also suggested that the equilibrium shape of snow crystals would be temperature dependent: rounded above -10.5 degrees C, and faceted below. To test these paradigms, we have performed SEM investigations of snow samples having undergone metamorphism under natural conditions, and of snow samples subjected to isothermal metamorphism at -4 degrees and -15 degrees C in the laboratory. In general, current theories predicting crystal shapes as a function of growth rates, and of whether crystals are growing or sublimating, are verified. However, the transition in equilibrium shapes from rounded to faceted at -10.5 degrees C is not observed in our isothermal experiments that reveal a predominance of rounded shapes after more than a month of metamorphism at -4 and -15 degrees C. Some small crystals with flat faces that also have sharp angles at -15 degrees C, are observed in our isothermal experiments. These faces are newly formed, and contradict current theory. Several hypotheses are proposed to explain their occurrence. One is that they are due to sublimation at emerging dislocations.     

X-ray magnifier

A method for the magnification of x-ray radiographic images is described and demonstrated. This magnifier employs two successive asymmetric diffractions of an x-ray beam from highly perfect silicon crystals. The two diffractions magnify the beam in two perpendicular directions. A device with a magnification of 25x is demonstrated for Cu K(alpha) radiation. This device preserves and sometimes improves the resolution inherent in the radiographic technique. The x-ray magnifier is particularly useful in circumventing the relatively poor spatial resolution of electro-optical imaging systems needed for real-time observations. Basic limits on magnification and resolution using this method are described.     

Some technical applications of reflected-light interference microscopy

The use of interference techniques in microscopy provides a useful tool for scientists and engineers in the investigation and measurement of very small changes in height on a reflecting surface. The interference fringes may be regarded as contour lines spaced at half the wave length of the monochromatic light used for illumination. This gives, in effect, a remarkably high magnification in depth and makes possible the assessment of the variations of flatness and finish of highly finished surfaces and the measurement of the thickness of vacuum evaporated films and the height of surface steps on crystals. Replica techniques can be used for the examination of inaccessible surfaces and also for the variation of the value of the fringe spacing if the pellicle is viewed when immersed in liquids of various refractive indices, thus varying the effective magnification and hence the range of measurement. Further, the use of fringes of equal chromatic order, involving the use of a spectroscope as an accessory to the microscope, as described by Tolansky and others, enables depth measurements to an accuracy of a few micrometres to be made readily.     

Video microscopic image processing facilitates the evaluation of light microscopic autoradiography at high magnification

Light microscopic autoradiographs of H-thymidine labelled unstained semithin sections of Xenopus laevis embryonic nuclei were examined with conventional Nomarski differential interference contrast, phase-contrast and video microscopy. Whereas at low magnification it was possible to obtain a photograph of the nuclear structure and the silver grains in one focal plain, at high magnification, with small depths of focus, a satisfactory image was not attainable. Therefore, we stored the images of the two different focus levels with a digital image processing system and combined both images by an arithmetic operation. This video microscopic technique allows the use of high magnification light microscopy with oil immersion objectives and the application of additional electronic contrast enhancing methods for an adequate and rapid analysis of light microscopic autoradiographs.     

超声磨削系统中圆锥形变幅杆的数值模拟及性能测试

由变幅杆大端直径、放大倍数、面积系数等已知条件,按照变幅杆设计理论对超声振动系统中的变幅杆进行设计;确定出其理论共振长度、小端直径、位移节点、放大系数、形状因数等参数。利用ANSYS进行建模,并对变幅杆振动性能进行数值模拟分析以确定其合理性。最后对该变幅杆振动性能进行试验测试分析。     

Critical-point drying versus freeze drying for scanning electron microscopy: a quantitative and qualitative study on isolated hepatocytes

Critical-point drying and freeze drying were compared both quantitatively and qualitatively as preparative procedures for scanning electron microscopy. Isolated hepatocytes were used as model cells. Nomarski differential interference contrast microscopy was used for light microscopic measurements of the hepatocytes in the unfixed, the glutaraldehyde fixed, the glutaraldehyde + OsO₄ fixed, the critical-point dried and the freeze dried states. Critical-point dried hepatocytes were found to shrink to 38% of glutaraldehyde + OsO₄ fixed volume, whereas optimal freeze dried hepatocytes (frozen in water saturated with chloroform and freeze dried at 183 K for 84 h) were found to shrink to 51% of glutaraldehyde + OsO₄ fixed volume. Transmission and scanning electron micrographs of the critical-point dried cells showed well-preserved ultrastructure and surface structure. Micrographs of the freeze dried cells showed ultrastructure destroyed by internal ice crystals and surface structure destroyed by external ice crystals. Double-fixed isolated hepatocytes were shown to swell during storage in buffer and to shrink during storage after critical-point drying. For low magnification scanning electron microscopy (up to about 3000 times) both critical-point drying and freeze drying can be used. However, for high magnification scanning electron microscopy, critical-point drying is superior to freeze drying.     

铁谱磨粒图像多焦点融合算法研究

铁谱分析技术是一种常用的磨损监测技术。受限于高倍物镜下的景深限制,一张铁谱大磨粒图像往往只有局部聚焦清晰的特征。为了能够解决在高倍物镜下铁谱大磨粒图像的自动化清晰采集以及高质量图像融合问题,设计并构建一套自动化扫描显微系统,该系统可进行多焦点铁谱图像的自动扫描采集;同时,提出一种基于相位一致性的铁谱磨粒图像多焦点融合算法,对自动扫描的多焦点图像进行融合,得到清晰的磨粒图像。实验结果表明,设计的自动化扫描显微系统能快速完成多焦点铁谱图像的自动化采集流程,提出的图像融合算法相较于传统的小波图像融合算法具有更高的图像评价质量,并能获得更加清晰的图像边缘信息。     

Irregular Helium Bubbles In Niobium Alloys

Helium bubbles have been produced in niobium-1% Zr by ion implantation and their growth has been studied by transmission electron microscopy of annealed specimens. Bubbles are normally faceted and develop from tetrakaidodecahedra at short times to cuboids bounded by {100} faces after long annealing periods. This behaviour, together with the observation of steps on the faces of many bubbles, is accounted for in terms of competition between the conditions necessary for thermodynamic equilibrium and the kinetics of bubble motion. The larger bubbles must contain an excess gas pressure.     

Observation of human dentine by focused ion beam and energy-filtering transmission electron microscopy

Molar dentine was sliced into 100 nm ultrathin sections, by means of a focused ion beam, for observation by energy-filtering transmission electron microscopy (EFTEM). Within the matrix, crystals approximately 10 nm wide and 50–100 nm long were clearly observed. When carbon and calcium were mapped in electron spectroscopic images by EFTEM, carbon failed to localize in crystals. However, it was found in other regions, especially those adjacent to crystals. Because carbon localizations were thought to reflect the presence of organic components, carbon concentration in regions near crystals suggested the interaction of crystals and organics, leading to organic control of apatite formation and growth. Ca was present in almost all regions. The majority of Ca localizing in regions other than crystals may be bound to organic substances present in dentine matrix. These substances are thought to both accumulate Ca and act as reservoirs for crystallization of apatite in dentine.     

基于邻域多边形特征和能量优化的网格参数化

针对复杂网格曲面提出了一种基于点邻域多边形特征和能量优化的网格曲面参数化方法。首先利用相邻两边夹角和长度比例建立节点邻域多边形特征方程组,通过求解一个约束优化问题将曲面网格展平到二维平面上;在网格曲面展平过程中不可避免会产生弹性变形能,然后采用能量优化方法释放曲面展平过程中的弹性变形能,最终得到网格曲面参数化结果。计算结果表明,该方法能得到较好的参数化结果,适用于复杂曲面的网格重划分等计算机辅助设计的应用。     

Fabrication of specimens of metamorphic magnetite crystals for field ion microscopy and atom probe microanalysis.

Field ion specimens have been successfully fabricated from samples of metamorphic magnetite crystals (Fe3O4) extracted from a polymetamorphosed, granulite-facies marble with the use of a focused ion beam. These magnetite crystals contain nanometer-scale, disk-shaped inclusions making this magnetite particularly attractive for investigating the capabilities of atom probe field ion microscopy (APFIM) for geological materials. Field ion microscope images of these magnetite crystals were obtained in which the observed size and morphology of the precipitates agree with previous results. Samples were analyzed in the energy compensated optical position-sensitive atom probe. Mass spectra were obtained in which peaks for singly ionized 16O, 56Fe and 56FeO and doubly ionized 54Fe, 56Fe and 57Fe peaks were fully resolved. Manganese and aluminum were observed in a limited analysis of a precipitate in an energy compensated position sensitive atom probe.     

Determination of the fatigue fracture planes of Co–Cr–Mo biomedical alloys using electron backscatter diffraction

Electron backscatter diffraction on a scanning electron microscope has been utilized to acquire crystal orientation information around faceted fatigue cracks in a Co–Cr–Mo alloy for medical implants. The faceted fracture planes are unambiguously determined as {111} planes.     

A combined top and side entry specimen stage for a Hitachi H500 transmission electron microscope

The Hitachi H500 transmission electron microscope has been modified in order that both the top and side entry specimen stages may be fitted simultaneously. This made possible top entry multi-specimen operation up to a maximum magnification of × 100,000 and a resolution of 1.8 nm, combined with the normal side entry stage facilities of ±60° tilt, 0.45 nm resolution and × 400,000 magnification.     

Fast drive of displacement magnification mechanism with flexure hinge using loading type impact damper

A displacement magnification mechanism which uses flexure motion guide using elastic hinges can realize smooth frictionless motion but has poor vibration damping capability. An impact damper is a damping mechanism which uses collision energy to dissipate vibration energy. If the damper is used for vibration control of the flexure mechanism, it may be able to dissipate unexpected vibration without killing the merits of the flexure mechanism. In the paper, a loading type impact damper is applied to settle down transient vibration of a displacement magnification mechanism. We investigate differences of damping effect by setting conditions of the damper. It is shown that the impact damper can eliminate residual vibration at step response effectively without steady state error. The experimental displacement magnification mechanism with impact damper can settle down less than 1/5 of the response without the damper under appropriate setting conditions. Influence of natural frequency ratio between damper and displacement magnification mechanism is investigated. Influences of indentation at impact point are also examined.     

Morphological analyses of minute crystals by using stereo-photogrammetric scanning electron microscopy and electron back-scattered diffraction

We present a new method for the morphological analyses of minute faceted crystals by combining stereo-photogrammetric analysis of scanning electron microscope images and electron back-scattered diffraction. Two scanning electron microscope images of the same crystal, recorded at different tilt angles of the specimen stage, are used to determine the orientations of crystal edges in a specimen-fixed coordinate system. The edge orientations are converted to the indices [ uvw ] in the crystal system using the crystal orientation determined by electron back-scattered diffraction analysis. The Miller indices of crystal facets are derived from the indices of the edges surrounding the facets. The method is applicable to very small crystal facets. The angular error, as derived from tests using a calcite crystal of known morphology, is a few degrees.
To demonstrate the applicability of the method, the morphology of boehmite (γ-AlOOH) precipitated from solution during the dissolution of anorthite was analyzed. The micrometre-sized boehmite crystals are surrounded by two {010} basal facets and eight equivalent side facets that can be indexed equally well as {323}, {434} or {545}. We suggest that these side facets are in fact {111}, the morphology having been modified slightly (by a few degrees) by a small extension associated with opening along (010) microcleavage planes. Tiny {140} facets are also commonly observed.     

High resolution SE-I SEM study of enamel crystal morphology

Until recently high resolution TEM was the only imaging mode capable of probing the atomic lattice structure of crystals composing tooth enamel. Studies designed to determine the polyhedral shape of normal enamel crystals and initiation of carious lesions in enamel crystals were hampered and limited by interpretation of two-dimensional TEM images from thin section and freeze fracture replica specimens lacking depth of field. The newly developed SE-I signal mode for SEM (SE-I/SE-II ratio) can produce images of enamel crystals approaching beam diameter dimensions (0.7–2.0 nm), rivaling the resolution of the TEM technique and generating topographic contrasts for three dimensional imaging at very high magnification (≈?1,000,000 X). Ultrathin chromium (Cr) films generate enriched high resolution SE-I contrasts of enamel crystal surfaces and when imaged using an immersion lens field emission SEM operated at high voltage (20–30 KeV) produce unsurpassed topographic contrasts. Since the grain size of Cr is below the resolution of any SEM and is ultrathin (≈?1 nm), then SE-I images can provide a more accurate representation of enamel crystal structure than TEM methodologies. Our SE-I SEM observations of normal human enamel crystals reveal fractured spicules which contain angled flat surfaces delineated by a prominent 2 nm wide SE-I edge brightness contrast. Although microscopic observations often show crystals which are hexagonal in cross-section, in both SEM and TEM many other growth habits, including rectangular or irregular crystals (30–40 nm in width) which contain “notches,” are also observed. More detailed morphological studies are therefore required to determine the most likely habit planes and their relevance to the function of the enamel crystals. The granular appearing fine structural contrast imposed onto <100> lattice planes of sectioned enamel in TEM micrographs is also resolved with topographic contrasts in SE-I micrographs. These granules probably represent one or both of the enamel protein classes.     

Post‐thinning using Ar ion‐milling system for transmission electron microscopy specimens prepared by focused ion beam system

We investigate Ar ion‐milling rates and Ga‐ion induced damage on sample surfaces of Si and GaAs single crystals prepared by focused ion beam (FIB) method for transmission electron microscopy observation. The convergent beam electron diffraction technique with Bloch simulation is used to measure the thickness of the Ar‐ion milled samples to calculate the milling rates of Si and GaAs single crystals. The measurement shows that an amorphous layer is formed on the sample surface and can be removed by further Ar‐ion milling. In addition, the local symmetry breaking induced by FIB is investigated using quantitative symmetry measurement. The FIBed‐GaAs sample shows local symmetry breaking after FIB milling, although the FIBed‐Si sample has no considerable symmetry breaking.     

A new approach to the interpretation of atom probe field-ion microscopy images.

The field distribution and the ion trajectories close to the tip surface are known to mainly control the contrast of field-ion microscopy and the resolution of the three-dimensional atom probe. The proper interpretation of images provided by these techniques requires the electric field and the ion trajectories to be determined accurately. A model has been developed in order to compute the ion trajectories close to a curved emitting surface modelled at the atomic scale. In this model, both the gradual change of the tip surface and the chemical nature of atoms were taken into account. Predictions and results given by this approach are shown to be in excellent agreement with experiments. The calculated electric field at the tip surface is consistent with field-ion microscopy contrasts. The preferential retention of surface atoms and the order of evaporation were correctly simulated. The ion trajectories were successfully described. In this way, the crucial problem of trajectory overlap and local magnification could be investigated. These simulations not only lead to a new understanding of the physical basis of image formation, but also have a predictive value.     

Resolution effect on the stereological estimation of surface and volume and its interpretation in terms of fractal dimensions

Estimating surface and volume density of subcellular membrane systems at different magnifications yield different results. As the magnification is increased from × 18,000 to × 130,000 the estimates of surface density of endoplasmic reticulum and inner mitochondrial membranes increase by a factor of 3, whereas that for outer mitochondrial membranes increases only by 20%. The estimate of volume density of endoplasmic reticulum also increases by a factor of 3. No further increase is observed at magnifications above × 130,000 which is therefore called critical magnification. The findings are interpreted on the basis of the concept of fractals proposed by Mandelbrot, and the fractal dimensions of the membrane systems considered are estimated. This can lead to the derivation of resolution correction factors which permit measurements obtained at any magnification to be converted to estimates at critical magnification. These findings may explain, at least in part, the large discrepancy in the estimates of the surface of cytomembranes found in the literature.