整流机组节能技术改造总结

介绍了整流机组的技术改造内容。通过改造,提高了装备技术水平,简化了操作,提高了供电的平稳性和安全性;降低了电力损耗;节约了能源。     

2010年度工作会议

<正>2010年1月16日—17日,公司召开了2010年度工作会议。会议认真回顾总结了2009年的主要工作,分析了当前的形势和机遇,部署了2010年的工作任务。会上,公司董事长蒋明作了重要讲话,总经理毛绍融作了行政工作报告,党委副书记陈百河作了党委工作报告,副总     

石墨电极数控机床常见故障分析

近年来,各炭素企业为了扩大再生产和替换陈旧设备,相继加快了石墨电极机床数字化改造步伐,不仅降低了操作者的劳动强度,提高了生产效率,而且减少了人为误差,提高了控制精度,保证了加工质量.     

高庄煤矿供热系统的改造

高庄煤矿针对原锅炉供热系统存在的问题进行了改造,拆除原锅炉,采用邻矿电厂的富余蒸气作热源,安装热交换器组。改造后保证了供热质量,节约了能源、资源,提高了矿区环境质量,降低了运行维护费用,节省了人力资源,减少了占地面积,节约了各项检查检测费用。     

低阶煤热解提质技术发展现状及趋势研究

本文围绕褐煤资源综合开发利用的问题进行了探讨;对褐煤煤质的特殊性进行了分析;对国内外褐煤提质加工技术进行了分类,简要说明了各类工艺的工作原理和技术特点;重点分析了国内外褐煤干燥热解技术的研究进展和工业应用情况,对工业化示范装置出现的问题进行了评价和总结;分析了制约褐煤发展的主要因素,并指出了未来产业发展的方向和重点.     

碱洗塔洗塔系统的优化

介绍了氯乙烯合成工段碱洗塔洗塔工艺流程,并针对存在的问题对其进行了优化升级,使碱洗塔自控洗塔、配碱,提高了系统的自动化控制水平,节约了水资源,也降低了废水处理系统的负荷,最大限度地提高了碱液的利用率,提高了工作效率,增加了经济效益,     

黑岱沟选煤厂集中控制系统的升级改造

介绍了选煤厂集中控制系统的结构及功能,分析了黑岱沟选煤厂改造前的状况,阐述了升级改造方案;集控系统升级改造后,全厂实现了智能联动,节约了劳动力,提高了生产效率。     

哈尔乌素选煤厂采用TDS智能干选机的改造及安全生产措施

介绍了TDS智能干选机在哈尔乌素选煤厂的应用现状及现场改造实践,从技术和管理方面提出了安全生产措施,改造后增强了选煤厂系统灵活性和市场适应性,降低了生产费用,稳定了煤质,保证了安全生产,提高了盈利能力,同时确保了生产工人辐射剂量小于一般公众限值,防爆和除尘满足规范和规程要求及煤矿安全生产要求。     

带式过滤机在多品种氢氧化铝生产中的应用

介绍了带式真空过滤机的工作原理及其在多品种氢氧化铝生产方面的应用情况,并对带式真空过滤机使用过程中存在的问题进行了改造。改造之后,提高了洗涤过滤效率,降低了滤饼水分,降低了能耗,提高了产量,确保了产品质量,取得了较好的经济效益。     

焦炉生产操作改进

介绍了焦炉生产中的改进措施,通过改进装煤方式,减少了装煤冒烟;配制新型填料,增强了炉体维护;改进了1M管的冲洗方式;改进炉顶水箱槽的高度;降低上升管底座的高度,杜绝连接处冒烟;改进装煤孔底座。通过采取这些改进措施,大大降低了生产成本,改善了职工的操作环境,降低了职工的劳动强度,提高了职工的工作效率,有效地保障了生产的平稳顺行。     

Structural,mechanical, and gas barrier properties of poly(ethylene terephthalate) nanohybrid using nanotalc

Amorphous poly(ethylene terephthalate) (PET)/nanotalc nanohybrids have been prepared through solution casting route. The fine dispersion of nanotalc clay in the polymer matrix has been examined through transmission electron microscopy (TEM). The intercalation and interaction of nanoclay have further been confirmed using X-ray diffraction, ultraviolet, and Fourier transform infrared techniques. The thermal stability has been tested via thermogravimetric analysis and nanohybrids have been found thermally stable. The glass-transition temperature has been further confirmed through DTA and differential scanning calorimetry analysis which has been increased in the presence of nanotalc arising from greater interaction. The nanohybrids have been tested for their mechanical performances and have been found to have improved mechanical responses for nanotalc-filled nanohybrids. The modulus has been increased whereas toughness has been compromised meagerly. The modulus values have been theoretically predicted using various micromechanical models. The microhardness of the nanohybrids has been examined through Vicker hardness test. The theoretical prediction of the hardness values has been done using different micromechanical models. The structural development upon uniaxial stretching of the samples has been studied using small-angle X-ray scattering and wide-angle ray diffraction. The stretched samples have found to have short-range ordering as well as increased blob size and better coherency in the presence of nanotalc. The aspect ratio has been increased upon stretching. The inclusion of nanotalc has induced high barrier for gas permeation as compared to pure PET. The oxygen transmission rate has been found to decrease up to 64% for 8 wt % of filler concentration. The prediction of the permeability data has been done using different models considering different aspect ratios. The permeability values have been predicted very closely and nanohybrids have been found suitable for practical applications such as packaging. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48607.     

Transition of Cs3C60 crystals with Rb impurity to the superconducting state

The statistical theory of phase transition in fullerides of alkali metals to the superconducting state has been elaborated. The calculation of the free energy of crystals has been performed on the basis of molecular-kinetics and the equilibrium equations have been examined. The critical temperature of superconductivity has been estimated, and its concentration dependence has been ascertained. The calculation results have been compared with experimental data. The numerical estimation for energetic parameters of pairing of Cooper pairs electrons has been performed.     

酯交换法合成碳酸二甲酯工艺研究

通过酯交换法,以甲醇和碳酸丙烯酯为原料,反应精饱同最佳剂,确定了其用量,考察了原料配比等对反应转化率的影响。同时,采用萃取精馏法对甲醇＝碳酸二甲酯二元恒沸物进行了分离研究,得到了适宜的萃取剂,研究了萃取剂的配比和回流比对分离性能的影响。并考察了催化剂和萃取剂的回收及循环使用对反应和分离性能的影响。对副产品丙二醇的回收及回流比对其纯度的影响也进行了考察。     

SIGNIFICANCE OF THE CENTRAL PLUME VELOCITY FOR THE CORRELATION OF LIQUID PHASE MIXING IN BUBBLE COLUMNS

The knowledge of the flow patterns of each phase of bubble column reactors is of considerable importance for the rational design and scale-up. The hydrodynamic models for the liquid phase have been reviewed. The models have been based on some form of pressure balance or energy balance. These two approaches have been compared and recommendations have been made regarding the range of applicability of the individual models. A comparison between the predicted and the experimental liquid velocities has been presented whenever possible. The range of variables has been pointed out for which further investigations are needed. The empirical and theoretical models for the mixing behavior of the different phases of bubble column reactors have also been reviewed.     

INVITED REVIEW ABSORPTION OF NOX GASES

Oxidation of nitric oxide is an important step in NO_x absorption. Recent advances namely catalytic oxidation and the use of slrong oxidizing agents have been reviewed. The refinements which have been made in the kinetics of NO oxidation have been discussed. Several liquid phase absorbents have been suggested for the NO removal, particularly for the purpose of pollution abatement. Different models for NO oxidation using nitric acid have been analysed and the limitations of published information have been brought out.

Absorption of tetravalent nitrogen oxide (NO₂ and N₂O₄) has received considerable attention. The absorbents include water, nitric and sulfuric acids, sodium hydroxide, sodium sulfite and sodium chlorite. Absorption in water and nitric acid is important in the manufacture of nitric acid. The published information on the mechanism of NO₂ and N₂O₄ absorption in water has been critically analysed. The problem of nitrous acid decomposition has been analysed on the basis of film theory. The predictions agree favourably with the available experimental data.

A new mathematical model has been developed for a packed column. Performance charts have been prepared which take into account the effects of concentration of nitric acid, superficial liquid velocity, temperature and the partial pressures of various components. A simplified model on the basis of NO oxidation has also been presented.

Various process design aspects have been discussed in detail. Optimum values for various operating parameters exist and basis for their selection has been explained. Some engineering aspects such as the selection of equipment and material of construction have also been discussed. A comparison between semi-batch and continuous modes of operation has been presented. The problem of the manufacture of pure nitrites has been analysed

Specific recommendations have been made regarding the use of equations and procedures in design. The knowledge gaps have been clearly brought out and suggestions have been made for future work     

电力电缆用膨胀型防火涂料的研制

依照电力电缆的特点和膨胀型防火涂料的膨胀防火机理,筛选涂料各组分原料。通过实验, 确定出合理的涂料配方。所生产的涂料经检测,各项理化指标均达到要求,防火性能达到了一级。     

Third-order optical nonlinearity in single-wall carbon nanotubes

The third-order optical nonlinearity in carbon nanotubes (CNT) exposed to an intensive external electromagnetic field has been investigated. The analysis is based on the quantum kinetic equations for the density matrix of π-electrons in CNT. In the regime of weak driving field, the kinetic equations have been solved by the perturbation method and the third-order nonlinear polarizability of different achiral CNTs has been calculated. The theory elaborated has been used for the evaluation of nonlinear susceptibility of CNT-based composites. Comparison with available experimental data has been presented. In the case of high intensive driving field a nonperturbative numerical simulation of the process has been carried out in the time domain. The axial current density in CNT has been calculated. Excitation of π-plasmons in CNTs has been analyzed.     

Evaluation of Amberlite IRC‐718 Chelating Ion Exchange Resin in Loading‐Elution‐Regeneration Cycles for the Separation and Recovery of Strontium from Alkaline Radioactive Waste

The separation and recovery of radiostrontium from simulated alkaline reprocessing waste solution has been studied using Amberlite IRC‐718, a chelating resin containing iminodiacetic acid groups. The breakthrough behavior of strontium has been determined by conducting an extended column run. The column loading performance has been correlated with batch equilibration results. Efficient elution of loaded strontium has been achieved using dilute nitric acid. Satisfactory column performance has been demonstrated in repeated loading‐elution‐regeneration cycles. Finally, the characteristics of used resin have been determined to ascertain its efficacy for further use.     

关于陶瓷墙地砖的深加工及其机械

本文简要回顾了陶瓷墙地砖深加工的工艺理论和机械设备。对陶瓷墙地砖深加工的自动抛光生产线和组成生产线的工艺单机作了一般介绍。指出设计陶瓷墙地砖深加工工艺单机时要注意的主要问题,并提供了解决这些问题的方法。     

油田含油污水过滤器滤料原位清洗再生

通过分析发现滤料污染物主要成分为原油、硫化物等。针对污染物成分研制了有效的滤料再生剂,很好地解决了致密的混合污染物层难以清除的问题。研制了加药装置,确定了滤料原位再生工艺,现场应用取得了良好的效果。