Quantitation of acyl migration during lipase-catalyzed acidolysis, and of the regioisomers of structured triacylglycerols formed

Various MLM-type (M, medium-chain fatty acids; L, long-chain fatty acids) structured triacylglycerols were produced in pilot- or small-scale packed-bed reactors by lipasecatalyzed acidolysis. The incorporation and acyl migration of octanoic acid were measured by gas chromatography and Grignard degradation, and ranged from 39.0 to 48.7% and 0.6 to 9.3%, respectively. Quantitation of triacylglycerol molecular species was performed by ammonia negative ion chemical ionization (NICI) mass spectrometry (MS). The proportion of ACN (acyl carbon number) 34 species that contained one C₁₈ fatty acid and two C_8∶0′ in samples analyzed, varied from 12.5 to 23.2%. The selected regioisomers MLM and MML within the ACN 34 species group were quantified by NICI tandem MS (MS/MS) and were in the range of 97.1 to 98.4% and 1.6 to 2.9%, respectively. There was no correlation between the level of acyl migration during lipase-catalyzed esterification and the level of regioisomers of the selected MLM-type triacylglycerols in the structured lipid samples.     

Production of Human Milk Fat Substitutes by Interesterification of Tripalmitin with Ethyl Oleate Catalyzed by Candida parapsilosis Lipase/Acyltransferase

In human milk fat, the saturated fatty acids, namely palmitic acid, are located at the sn-2 position of triacylglycerols (TAG) while unsaturated fatty acids (e.g. oleic acid) are esterified at position sn-1,3. Thus, sn-1,3-dioleoyl-2-palmitoylglycerol (OPO) is the target TAG to be used as human milk fat substitutes (HMFS) in infant formulas. In this study, the noncommercial recombinant lipase/acyltransferase from Candida parapsilosis (CpLIP2) was immobilized in Accurel MP1000, and used as a biocatalyst for the interesterification of tripalmitin with ethyl oleate in a solvent-free medium, to obtain structured lipids used as HMFS. Different molar ratios (MR) of ethyl oleate to tripalmitin (2:1–8:1) were used. After 4 h reaction at 60°C, about 30 mol% of oleic acid incorporation was already observed for all tested MR. An apparent equilibrium was reached after 8–24 h, with 32–51 mol% final incorporation, increasing with the MR. The incorporation of oleic acid into TAG was compared with the maximum predicted values when a random or a sn-1,3-regioselective biocatalyst was used. The obtained values are consistent with the maximum incorporation expected for a sn-1,3-regioselective enzyme. In fact, the amount of oleic acid at position sn-2 was approximately 15% for all the MR tested, which is explained by the acyl migration phenomenon. CpLIP2 exhibited higher activity than most commercial immobilized lipases (e.g. faster reaction in solvent-free media, low enzyme load, and low MR needed), and showed a recognized sn-1,3 regioselective behavior.     

Regioisomers of octanoic acid-containing structured triacylglycerols analyzed by tandem mass spectrometry using ammonia negative ion chemical ionization

Tandem mass spectrometry based on ammonia negative ion chemical ionization and sample introduction via direct exposure probe was applied to analysis of regioisomeric structures of octanoic acid containing structured triacylglycerols (TAG) of type MML, MLM, MLL, and LML (M, medium-chain fatty acid; L, long-chain fatty acid). Collision-induced dissociation of deprotonated parent TAG with argon was used to produce daughter ion spectra with appropriate fragmentation patterns for structure determination. Fatty acids constituting the TAG molecule were identified according to [RCO₂]⁻ ions in the daughter ion spectra. With the standard curve for ratios of [M-H-RCO₂H-100]⁻ ions corresponding to each [RCO₂]⁻ ion, determined with known mixtures of sn-1/3 and sn-2 regioisomers of structured TAG, it was possible to determine the proportions of different regioisomers in unknown samples. The method enabled quantification of MML- and MLM-type structured TAG. In the case of MLL- and LML-type TAG, it was possible to determine the most abundant regioisomer in the unknown mixture and estimate the proportions of regioisomers when there were more than 50% MLL-type isomers in the mixture.     

Elucidation of acyl migration during lipase-catalyzed production of structured phospholipids

Elucidation of acyl migration was carried out in the Lipozyme RM IM (Rhizomucor miehei)-catalyzed transesterification between soybean phosphatidylcholine (PC) and caprylic acid in solvent-free media. A five-factor response surface design was used to evaluate the influence of five major factors and their relationships. The five factors—enzyme dosage, reaction temperature, water addition, reaction time, and substrate ratio—were varied on three levels together with two star points. Enzyme dosage, reaction temperature, and reaction time showed increased effect on the acyl migration into the sn-2 position of PC, whereas increased water addition and substrate ratio had no significant effect in the ranges tested. The best-fitting quadratic response surface model was determined by regression and backward elimination. The coefficient of determination (R ²) was 0.84, which indicates that the fitted quadratic model has acceptable qualities in expressing acyl migration for the enzymatic transesterification. Correlation was observed between acyl donor in the sn-2 position of PC and incorporation of acyl donor into the intermediate lysophosphatidylcholine. Furthermore, acyl migration into the sn-2 position of PC was confirmed by TLC-FID, as PC with caprylic acid was observed on both positions. Under certain conditions, up to 18% incorporation could be observed in the sn-2 position during the lipase-catalyzed transesterification.     

Production of specific-structured triacylglycerols by lipase-catalyzed interesterification in a laboratory-scale continuous reactor

A laboratory-scale continuous reactor was constructed for production of specific structured triacylglycerols containing essential fatty acids and medium-chain fatty acids (MCFA) in the sn-2 and sn-1,3 positions, respectively. Different parameters in the lipase-catalyzed interesterification were elucidated. The reaction time was the most critical factor. Longer reaction time resulted in higher yield, but was accompanied by increased acyl migration. The concentration of the desired triacylglycerol (TAG) in the interesterification product increased significantly with reaction time, even though there was only a slight increase in the incorporation of MCFA. Increased reactor temperature and content of MCFA in the initial reaction substrate improved the incorporation of MCFA and the yield of the desired TAG in the products. Little increase of acyl migration was observed. Increasing the water content from 0.03 to 0.11% (w/w substrate) in the reaction substrate had almost no effect on either the incorporation or the migration of MCFA, or on the resulting composition of TAG products and their free fatty acid content. Therefore, we conclude that the water in the original reaction substrate is sufficient to maintain the enzyme activity in this continuous reactor. Since the substrates were contacted with a large amount of lipase, the reaction time was shorter compared with a batch reactor, resulting in reduced acyl migration. Consequently, the purity of the specific structured TAG produced was improved. Interesterification of various vegetable oils and caprylic acid also demonstrated that the incorporation was affected by the reaction media. Reaction conditions for lipase-catalyzed synthesis of specific structured TAG should be optimized according to the oil in use. Presented in part at Food Science Conference, Copenhagen, Denmark, January 30–31, 1997.     

Production of specific-structured triacylglycerols by lipase-catalyzed interesterification in a laboratory-scale continuous reactor

A laboratory-scale continuous reactor was constructed for production of specific structured triacylglycerols containing essential fatty acids and medium-chain fatty acids (MCFA) in the sn-2 and sn-1,3 positions, respectively. Different parameters in the lipase-catalyzed interesterification were elucidated. The reaction time was the most critical factor. Longer reaction time resulted in higher yield, but was accompanied by increased acyl migration. The concentration of the desired triacylglycerol (TAG) in the interesterification product increased significantly with reaction time, even though there was only a slight increase in the incorporation of MCFA. Increased reactor temperature and content of MCFA in the initial reaction substrate improved the incorporation of MCFA and the yield of the desired TAG in the products. Little increase of acyl migration was observed. Increasing the water content from 0.03 to 0.11% (w/w substrate) in the reaction substrate had almost no effect on either the incorporation or the migration of MCFA, or on the resulting composition of TAG products and their free fatty acid content. Therefore, we conclude that the water in the original reaction substrate is sufficient to maintain the enzyme activity in this continuous reactor. Since the substrates were contacted with a large amount of lipase, the reaction time was shorter compared with a batch reactor, resulting in reduced acyl migration. Consequently, the purity of the specific structured TAG produced was improved. Interesterification of various vegetable oils and caprylic acid also demonstrated that the incorporation was affected by the reaction media. Reaction conditions for lipase-catalyzed synthesis of specific structured TAG should be optimized according to the oil in use. Presented in part at Food Science Conference, Copenhagen, Denmark, January 30–31, 1997.     

Production of structured lipids by lipase-catalyzed acidolysis in supercritical carbon dioxide: Effect on acyl migration

Structured lipids were synthesized by the acidolysis of corn oil by caprylic acid in supercritical carbon dioxide (SCCO₂) with Lipozyme RM IM from Rhizomucor miehei. The effects of pressure and temperature on the reaction were studied. To compare the degrees of acyl migration in the SCCO₂ and solvent-free reaction systems, the effects of reaction time on the degree of acyl migration were also studied. The highest mole percentage incorporation of caprylic acid (62.2 mol%) occurred at 24.13 MPa in SCCO₂. The overall incorporation of caprylic acid in the SCCO₂ system remained higher than that in the solvent-free system at every temperature tested. This trend was observed more clearly at lower temperatures (35–55°C) than at higher temperatures (65–75°C). Acyl migration with both reaction systems was low, with a negligible difference between them up to 12 h, after which the degree of acyl migration in the solvent-free system increased rapidly with time up to 24 h compared with the SCCO₂ system.     

Lipase-catalyzed acidolysis of perilla oil with caprylic acid to produce structured lipids

Structured lipids were synthesized by acidolysis of perilla oil and caprylic acid using two lipases, Lipozyme RM IM from Rhizomucor miehei and Lipozyme TL IM from Thermomyces lanuginosa. Effects of molar ratio, reaction time, reaction temperature, enzyme load, and solvent content on acidolysis reactions were studied. The solvent content ranged from 0.0 (solvent-free) to 85.3%. The results showed that the incorporation increased in parallel with solvent content to 49.0% with Lipozyme RM IM and to 63.8% with Lipozyme TL IM. After 24 h incubation in n-hexane, caprylic acids were incorporated to 48.5 mol% with Lipozyme RM IM and to 51.4 mol% with Lipozyme TL IM, respectively, whereas linolenic acid content was reduced from 61.4 to 31.5 mol% with Lipozyme RM IM and to 28.4 mol% with Lipozyme TL IM, respectively. Lipozyme TL IM showed a higher acyl migration rate than Lipozyme RM IM when acidolysis was performed in the reaction system containing n-hexane as a solvent, whereas the difference in acyl migration between the two lipases in the solvent-free system was negligible.     

Purification of 2-Monoacylglycerols Using Liquid CO<Subscript>2</Subscript> Extraction

The fatty acid moiety of 2-monoacyl-sn-glycerol (2-MAG) undergoes spontaneous acyl migration to the sn-1(3) position, resulting in a thermodynamic equilibrium of approximately 1:9 of 2-MAG to 1(3)-monoacyl-sn-glycerol (1-MAG). Spontaneous acyl migration is an impediment to synthesizing and isolating specific 2-MAG for use as intermediates in the synthesis of structured triacylglycerols. 2-Monooleoyl-sn-glycerol was synthesized by the enzymatic ethanolysis of triolein and isolated by liquid CO₂ extraction. The resultant MAG, diacylglycerol, and fatty acid ethyl esters were quantified by ¹H NMR and supercritical fluid chromatography. The low polarity of the CO₂ and mild extraction temperature (25 °C) resulted in very low spontaneous acyl migration rates, allowing the MAG to be isolated in 80% yield and in a very high 2-MAG:1-MAG ratios of ≥93 mol%.     

Enzymatic Analysis of Positional Distribution of Fatty Acids in Solid Fat by 1,3-Selective Transesterification with Candida antarctica Lipase B

A protocol for the analysis of the positional distribution of fatty acids (FA) in solid triacylglycerols (TAG) was developed using sn-1(3) selective alcoholysis catalyzed by immobilized Candida antarctica lipase B (CALB). One part by weight of solid fat and ten parts by weight of ethanol (99.5 %) were warmed to liquefy the fat. After adding 0.44 parts by weight of CALB, the mixture was shaken at 50 °C for 10 min then at 30 °C for 2.8 h. The recovery of 2-MAG after the 3-h transesterification reaction was ca. 85 % of the maximum theoretical yield (33 mol%), with the loss of 15 % attributable to the acyl migration from sn-2 to sn-1(3). The recovery was similar to that of the solvent-free alcoholysis of structured lipids, 1,3-dipalmitoyl, 2-oleoyl glycerol and 1,3-dioleoyl, 2-palmitoyl glycerol, conducted at 30 °C for 3 h. In contrast, the acyl migration from sn-1(3) to sn-2 was hardly observed. Because the detected acyl migration was only in the direction of sn-2 to sn-1(3), and not vice versa, it is proposed to determine the FA composition of the sn-2 position of TAG by the gas chromatographic analysis of 2-MAG fraction recovered from the enzymatic reaction mixture, and the FA composition of sn-1(3) position by a mass balance using the FA composition of TAG and of the sn-2 position as inputs. The procedure was successfully applied to palm oil and shea butter, and docosahexaenoic acid (DHA)-rich single cell oil from Aurantiochytrium sp. KH105 for the first time.     

Enzymatic synthesis of medium‐chain triacylglycerols by alcoholysis and interesterification of copra oil using a crude papain lipase preparation

We have examined the possibility of producing analogs of medium‐chain triglycerides (MCT) from copra oil, i.e. a triacylglycerol mixture with a high content of medium‐chain fatty acid moieties (C₆–C₁₀). A two‐step enzymatic process was used in which copra triacylglycerols were first split with papain lipase by alcoholysis with an alkyl alcohol and then subjected to interesterification with the alkyl esters recovered using papain lipase. Effects of temperature, water activity content, substrate ratio, biocatalyst amount, and alcohol chain length were also investigated. On the one hand, the sn‐3 stereoselectivity of the lipase in the alcoholysis of copra oil with butanol has permitted a direct enrichment of caproic, caprylic and capric moieties in the synthesized butyl esters. Thus, in the batch reactor, the reaction led to about 31% conversion of the oil after 24 h, and the content of C₆–C₁₀ acids in the synthesized esters increased from about 16% in the starting oil to almost 42%. A similar enzymatic alcoholysis in a packed‐bed column bioreactor gave 31% conversion of the oil after 120 min of reactor residence time. The reaction was also very selective because the C₆–C₁₀ fatty acyl groups represented about half of the newly formed butyl esters, whereas they accounted for only 16% of total fatty acids in the starting oil. On the other hand, the transesterification of the alkyl esters recovered (highly enriched in C₆–C₁₀ fatty acyl groups) with native copra oil directly led to an increase in the content of MCT in the oil, from 18 mol‐% at the beginning of the reaction to 61 mol‐% of MCT after a time period of 72 h in the batch reactor.     

Production of MLM-Type Structured Lipids Catalyzed by Immobilized Heterologous <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> Lipase

This work aims to produce triacylglycerols (TAG) containing a medium-chain fatty acid (M) at positions sn-1,3 and a long-chain fatty acid (L) at sn-2 position, i.e. TAG of MLM type, by acidolysis of virgin olive oil with caprylic (C8:0) or capric (C10:0) acids, catalyzed by 1,3-selective Rhizopus oryzae heterologous lipase (rROL) immobilized in Eupergit^® C and modified sepiolite. This lipase was produced by the methylotrophic yeast Pichia pastoris. Reactions were performed at 25 and 40 °C, for 24 h, either in solvent-free or in n-hexane media, at a molar ratio 1:2 (olive oil:free fatty acid). Higher incorporations of C8:0 (21.6 mol%) and C10:0 (34.8 mol%) into the TAG were attained in solvent-free media, at 40 °C, when rROL immobilized in Eupergit^® C was used. In organic media, at 40 °C, only 15.9 and 14.1 mol%, incorporation of C8:0 or C10:0 were, respectively observed. Lower incorporations were attained for both acids (3.4–7.0 mol%) when native ROL (nROL) in both supports and rROL in modified sepiolite were used. rROL in Eupergit^® C maintained its activity during the first four or three 23-h batches, respectively when C8:0 (half-life time, t _1/2 = 159 h) or C10:0 (t _1/2 = 136 h) were used, decreasing thereafter following a time delay model.     

Adipose monoacylglycerol: Acyl-coenzyme a acyltransferase activity in the white-throated sparrow (Zonotrichia albicollis): Characterization and function in a migratory bird

Although migrating birds use stored triacylglycerol as their primary fuel for flight, they must retain sufficient stores of ω6 and ω3 fatty acids to sustain reproduction after the spring migration. Hepatic monoacylglycerol:acyl-coenzyme A acyltransferase (EC 2.3.1.22) (MGAT) activity is associated with physiological periods in which lipolysis and β-oxidation are prominent, and it may also play a role in the selective retention of certain essential fatty acids. Therefore, we characterized MGAT activity in adipose tissue from the whitethroated sparrow (Zonotrichia albicollis), a migratory bird. MGAT specific activity from adipose tissue and liver, respectively, was 22.2±7.27 and 0.79±0.35 nmol/min/mg of total particulate protein. Activity did not vary seasonally or between male and female birds. Specific activity increased 4.3-fold in the presence of 75 μg of phosphatidylcholine and phosphatidylserine (1∶1, w/w). MGAT acylatedsn-1(3)-monooleoyglycerol,sn-2-monoolyelglycerol ether andsn-1(3)-monooleylglycerol ether at 7.5, 5.7 and 1.7%, respectively, of the rate observed withsn-2-monooleoylglycerol. An initial lag phase observed at low concentrations of palmitoyl-CoA was corrected by adding 2 mM MgCl₂ Mg(NO₂)₂ or CaCl₂, suggesting a requirement for divalent cations. MGAT acylatedsn-2-monolinolenoylglycerol andsn-2-monolinoleoylglycerol in preference tosn-2-monooleoylglycerol. Specificity of MGAT forsn-2-monoacylglycerols and the probable enhanced affinity forsn-2-monoacylglycerols of specific acyl chains may allow selected ω6 and ω3 fatty acids to be retained within the adipocyte, white nonessential fatty acids are released for β-oxidation in flight muscles.     

Specific distribution of fatty acids in the milk fat triglycerides of goat and sheep

The triglycerides of the fat globules of sheep and goat milk were isolated and separated into short and long chain lengths by silicic acid column chromatography. The short chain lengths comprised major triglycerides with 34–44 acyl carbon atoms and accounted for nearly 50% of the total milk fat. The long chain lengths contained major triglycerides with 40–54 acyl carbons. Stereospecific analyses of the short chain triglyceride fraction showed that of the 20–23 moles per cent of C₄−C₈ fatty acids present, at least 95% were specifically attached to the glycerol molecule in the position corresponding to carbon 3 ofsn-glycerol. The distribution of the other fatty acids (C₁₀ or greater) did not show such marked specificity for either the 1 or the 2 position. Although individual triglycerides were not identified, the specific placement of the fatty acids could best the accounted for by assuming a common pool of long chain 1,2-diglycerides which served as precursors of the bulk of both short and long chain triglycerides during milk fat synthesis. Presented in part at the AOCS Meeting, New York, October 1968.     

Stereospecific analysis of triacyl-sn-glycerolsvia resolution of diastereomeric diacylglycerol derivatives by high-performance liquid chromatography on silica

The compositions of positionssn-1, 2 and 3 of triacylglycerols can be determined by partial hydrolysis with ethyl magnesium bromide, derivatization of the total products with (S)-(+)-1-(1-naphthyl)ethyl isocyanate and isolation of the diacyl-sn-glycerol urethane derivatives by chromatography on solid-phase extraction columns containing an octadecylsilyl phase. The diastereomericsn-1,2-and 2,3-diacylglycerol derivatives are separated by high-performance liquid chromatography on silica for determination of their fatty acids by gas chromatography. Each step in the process has been evaluated rigorously. The compositions of all three positions can be calculated with good accuracy from the analyses of these compounds and that of the total triacylglycerols. Although the 1,3-sn-diacylglycerol derivatives can also be isolated easily, they do not give reliable results for the composition of positionsn-2 because acyl migration occurs during their generation. The stereospecific analysis procedure has been applied to some plant and animal triacyl-sn-glycerols of commercial and scientific interest, containing predominantly C₁₆ and C₁₈ fatty acids,i.e. safflower, sunflower, olive and palm oils, tallow, egg and rat adipose tissue. The method is not at present suited to the analysis of more complex triacylglycerols, such as milk fat or fish oils, and problems associated with these are discussed.     

Production of specific-structured lipids by enzymatic interesterification: Elucidation of Acyl migration by response surface design

Production of specific-structured lipids (SSL) by lipase-catalyzed interesterification has been attracting more and more attention recently. However, it was found that acyl migration occurs during the reaction and causes the production of by-products. In this paper, the elucidation of acyl migration by response surface design was carried out in the Lipozyme IM (Rhizomucor miehei)-catalyzed interesterification between rapeseed oil and capric acid in solvent-free media. A five-factor response surface design was used to evaluate the influence of five major factors and their relationships. The five factors, water content, reaction temperature, enzyme load, reaction time and substrate ratio, were varied at three levels together with two star points. All parameters besides substrate ratio had strong positive influences on acyl migration, and reaction temperature was most significant. The contour plots clearly show the interactions between the parameters. The migration rates of different fatty acids were also compared from three different sets of experiments during the lipase-catalyzed reaction. The best-fitting quadratic response surface model was determined by regression and backward elimination. The coefficients of determination (R ²) of the model were 0.996 and 0.981 for Q ² value. The results show that the fitted quadratic model satisfactorily expresses acyl migration for the enzymatic interesterification in the batch reactor used.     

Production of specific-structured lipids by enzymatic interesterification: Elucidation of acyl migration by response surface design

Production of specific-structured lipids (SSL) by lipase-catalyzed interesterification has been attracting more and more attention recently. However, it was found that acyl migration occurs during the reaction and causes the production of byproducts. In this paper, the elucidation of acyl migration by response surface design was carried out in the Lipozyme IM (Rhizomucor miehei)-catalyzed interesterification between rapeseed oil and capric acid in solvent-free media. A five-factor response surface design was used to evaluate the influence of five major factors and their relationships. The five factors, water content, reaction temperature, enzyme load, reaction time and substrate ratio, were varied at three levels together with two star points. All parameters besides substrate ratio had strong positive influences on acyl migration, and reaction temperature was most significant. The contour plots clearly show the interactions between the parameters. The migration rates of different fatty acids were also compared from three different sets of experiments during the lipase-catalyzed reaction. The best-fitting quadratic response surface model was determined by regression and backward elimination. The coefficients of determination (R ²) of the model were 0.996 and 0.981 for Q ² value. The results show that the fitted quadratic model satisfactorily expresses acyl migration for the enzymatic interesterification in the batch reactor used.     

Stereospecific analysis of glycerolipids of egg yolk of Japanese quail (Coturnix coturnix japonica)

Phosphatidylcholine, phosphatidylethanolamine and triacylglycerol were isolated from egg yolk of the Japanese quail. Fatty acid compositions at the two and three positions of glycerol in the glycerolipids were determined by stereospecific analysis employing phospholipase A₂. The distribution of the total number of carbon atoms in the fatty acid moieties of triacylglycerol was also quantitated by high temperature gas liquid chromatography. The distribution of acyl groups in each of the positions of the phosphatidylcholine, phosphatidylethanolamine and triacylglycerol was not random, and each position has a characteristic composition. The phosphatidylcholine and phosphatidylethanolamine had distinctive fatty acid distributions for positionsn-2 of the triacylglycerol had a predominance of unsaturated fatty acids of which 18∶1 (69.9%) was the major component. Positionsn-3 contained 49.3% saturated fatty acids and was more saturated than positionsn-1 by 8.1%. The experimentally determined distribution of the carbon numbers in triacyl glycerol deviated significantly from the distribution predicted by 1-random-2-random-3-random association of the fatty acids. The data suggest that in Japanese quail there is marked preferencial synthesis of some triacylglycerols.     

Preparation of phospholipids highly enriched with n-3 polyunsaturated fatty acids by lipase

The immobilized 1,3-regiospecific Rhizomucor miehei lipase (Lipozyme™) was employed to catalyze the transesterification reaction (acidolysis) of 1,2-diacyl-sn-glycero-3-phosphatidylcholine with n-3 polyunsaturated fatty acids under nonaqueous solvent-free conditions. With a concentrate of 55% eicosapentaenoic acid (EPA) and 30% docosahexaenoic acid (DHA) and pure phosphatidylcholine from egg yolk, phospholipids of 32% EPA and 16% DHA content were obtained, presumably as a mixture of phosphatidylcholine and lysophosphatidylcholine. ³¹P nuclear magnetic resonance (NMR) analysis turned out to be a valuable technique to study the details of the reactions involved. It revealed that when 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine was transesterified with 98% pure EPA, a substantial amount of hydrolysis side reaction took place (39%), leading to a product mixture of 39% phosphatidylcholine, 44% lysophosphatidylcholine, and 17% sn-glycerol-3-phosphatidylcholine. The lysophosphatidylcholine constituent comprised 70% EPA, whereas the phosphatidylcholine component contained 58% EPA. The ³¹P NMR technique provided valid information about the mechanism of the reaction. It became evident that a high dosage of lipase containing 5% water afforded optimal conditions for the optimal extent of EPA incorporation into the phospholipids, under which the extent of hydrolysis side reaction remained relatively high.     

Stereospecificity of monoacylglycerol and diacylglycerol acyltransferases from rat intestine as determined by chiral phase high-performance liquid chromatography

Using chiral phase high-performance liquid chromatography of diacylglycerols, we have redetermined the ratios of 1,2-/2,3-diacyl-sn-glycerols resulting from acylation of 2-monoacylglycerols by membrane bound and solubilized triacylglycerol systhetase of rat intestinal mucosa. With 2-oleoyl[-³H]glycerol as the acyl acceptor and oleoyl-CoA as the acyl donor, 97–98% of the diacylglycerol product was 1,2(2,3)-dioleoyl-sn-glycerol, 90% of which was thesn-1,2-and 10% thesn-2,3-enantiomer. The remaining diacylglycerol (less than 3%) was thesn-1,3-isomer. The overall yield of acylation products was 70%, of which 60% were diacylglycerols and 40% triacylglycerols. With 2-oleylglycerol ether as the acyl acceptor and [1-¹⁴C]oleoyl-CoA as the acyl donor, 90% of the diradylglycerol was 1-oleoyl-2-oleyl-sn-glycerol and 10% was the 2-oleyl-3-oleoyl-sn-glycerol. The diradylglycerols made up 96% and the triradylglycerols 4% of the radioactive product. With 1-palmitoyl-sn-glycerol as the acyl acceptor and [1-¹⁴C]oleoyl-CoA as the acyl donor, the predominant reaction product was 1-palmitoyl-3-oleoyl-sn-glycerol. The 3-palmitoyl-sn-glycerol was not a suitable acyl acceptor. Both 1,2- and 2,3-diacyl-sn-glycerols were substrates for diacylglycerol acyltransferase as neither isomer was favored when 1,2-dioleoyl-rac-[2-³H]glycerol was used as the acyl acceptor. There was a marked decrease in the acylation of the 1(3)-oleoyl-2-oleyl-sn-glycerol to the 1,3-dioleoyl-2-oleyl-sn-glycerol. It is concluded that neither monoacylglycerol nor diacylglycerol acyltransferase exhibit absolute stereospecificity for acylglycerols as fatty acid acceptors.