Bioluminescence microscopy using a short focal‐length imaging lens

Bioluminescence from cells is so dim that bioluminescence microscopy is performed using an ultra low‐light imaging camera. Although the image sensor of such cameras has been greatly improved over time, such improvements have not been made commercially available for microscopes until now. Here, we customized the optical system of a microscope for bioluminescence imaging. As a result, bioluminescence images of cells could be captured with a conventional objective lens and colour imaging camera. As bioluminescence microscopy requires no excitation light, it lacks the photo‐toxicity associated with fluorescence imaging and permits the long‐term, nonlethal observation of living cells. Thus, bioluminescence microscopy would be a powerful tool in cellular biology that complements fluorescence microscopy.     

Fast 3D imaging of giant unilamellar vesicles using reflected light-sheet microscopy with single molecule sensitivity

Observation of highly dynamic processes inside living cells at the single molecule level is key for a better understanding of biological systems. However, imaging of single molecules in living cells is usually limited by the spatial and temporal resolution, photobleaching and the signal-to-background ratio. To overcome these limitations, light-sheet microscopes with thin selective plane illumination, for example, in a reflected geometry with a high numerical aperture imaging objective, have been developed. Here, we developed a reflected light-sheet microscope with active optics for fast, high contrast, two-colour acquisition of -stacks. We demonstrate fast volume scanning by imaging a two-colour giant unilamellar vesicle (GUV) hemisphere. In addition, the high contrast enabled the imaging and tracking of single lipids in the GUV cap. The enhanced reflected scanning light-sheet microscope enables fast 3D scanning of artificial membrane systems and potentially live cells with single-molecule sensitivity and thereby could provide quantitative and molecular insight into the operation of cells.     

Three-dimensional image formation in confocal microscopy

Three-dimensional (3-D) imaging in confocal microscopes is considered in terms of 3-D transfer functions. This leads to an explanation of axial imaging properties. The axial response was observed in both object-scanning and beam-scanning microscopes and the influence of off-axis examination investigated. By simple processing of multi-detector signals, imaging in both the axial and transverse directions can be improved.     

Predictive-focus illumination for reducing photodamage in live-cell microscopy

Due to photobleaching and phototoxicity induced by high-intensity excitation light, the number of fluorescence images that can be obtained in live cells is always limited. This limitation becomes particularly prominent in multidimensional recordings when multiple Z-planes are captured at every time point. Here we present a simple technique, termed predictive-focus illumination (PFI), which helps to minimize cells' exposure to light by decreasing the number of Z-planes that need to be captured in live-cell 3D time-lapse recordings. PFI utilizes computer tracking to predict positions of objects of interest (OOIs) and restricts image acquisition to small dynamic Z-regions centred on each OOI. Importantly, PFI does not require hardware modifications and it can be easily implemented on standard wide-field and spinning-disc confocal microscopes.     

Real‐time three‐dimensional imaging of cell division by differential interference contrast microscopy

Differential interference contrast (DIC) microscopy can provide information about subcellular components and organelles inside living cells. Applicability to date, however, has been limited to 2D imaging. Unfortunately, understanding of cellular dynamics is difficult to extract from these single optical sections. We demonstrate here that 3D differential interference contrast microscopy has sub‐diffraction limit resolution both laterally and vertically, and can be used for following Madin Darby canine kidney cell division process in real time. This is made possible by optimization of the microscope optics and by incorporating computer‐controlled vertical scanning of the microscope stage.     

Multiphoton microscopy in life sciences

Near infrared (NIR) multiphoton microscopy is becoming a novel optical tool of choice for fluorescence imaging with high spatial and temporal resolution, diagnostics, photochemistry and nanoprocessing within living cells and tissues. Three‐dimensional fluorescence imaging based on non‐resonant two‐photon or three‐photon fluorophor excitation requires light intensities in the range of MW cm^?2 to GW cm^?2, which can be derived by diffraction limited focusing of continuous wave and pulsed NIR laser radiation. NIR lasers can be employed as the excitation source for multifluorophor multiphoton excitation and hence multicolour imaging. In combination with fluorescence in situ hybridization (FISH), this novel approach can be used for multi‐gene detection (multiphoton multicolour FISH). Owing to the high NIR penetration depth, non‐invasive optical biopsies can be obtained from patients and ex vivo tissue by morphological and functional fluorescence imaging of endogenous fluorophores such as NAD(P)H, flavin, lipofuscin, porphyrins, collagen and elastin. Recent botanical applications of multiphoton microscopy include depth‐resolved imaging of pigments (chlorophyll) and green fluorescent proteins as well as non‐invasive fluorophore loading into single living plant cells. Non‐destructive fluorescence imaging with multiphoton microscopes is limited to an optical window. Above certain intensities, multiphoton laser microscopy leads to impaired cellular reproduction, formation of giant cells, oxidative stress and apoptosis‐like cell death. Major intracellular targets of photodamage in animal cells are mitochondria as well as the Golgi apparatus. The damage is most likely based on a two‐photon excitation process rather than a one‐photon or three‐photon event. Picosecond and femtosecond laser microscopes therefore provide approximately the same safe relative optical window for two‐photon vital cell studies. In labelled cells, additional phototoxic effects may occur via photodynamic action. This has been demonstrated for aminolevulinic acid‐induced protoporphyrin IX and other porphyrin sensitizers in cells. When the light intensity in NIR microscopes is increased to TW cm^?2 levels, highly localized optical breakdown and plasma formation do occur. These femtosecond NIR laser microscopes can also be used as novel ultraprecise nanosurgical tools with cut sizes between 100 nm and 300 nm. Using the versatile nanoscalpel, intracellular dissection of chromosomes within living cells can be performed without perturbing the outer cell membrane. Moreover, cells remain alive. Non‐invasive NIR laser surgery within a living cell or within an organelle is therefore possible.     

An open‐source deconvolution software package for 3‐D quantitative fluorescence microscopy imaging

Deconvolution techniques have been widely used for restoring the 3‐D quantitative information of an unknown specimen observed using a wide‐field fluorescence microscope. Deconv , an open‐source deconvolution software package, was developed for 3‐D quantitative fluorescence microscopy imaging and was released under the GNU Public License. Deconv provides numerical routines for simulation of a 3‐D point spread function and deconvolution routines implemented three constrained iterative deconvolution algorithms: one based on a Poisson noise model and two others based on a Gaussian noise model. These algorithms are presented and evaluated using synthetic images and experimentally obtained microscope images, and the use of the library is explained. Deconv allows users to assess the utility of these deconvolution algorithms and to determine which are suited for a particular imaging application. The design of Deconv makes it easy for deconvolution capabilities to be incorporated into existing imaging applications.     

Full spectrum filterless fluorescence microscopy

In conventional microscopes, fluorescence emission is separated from the backscattered illumination using the Stokes shift, whereby the emission occurs at a longer wavelength to the excitation. Such separation is usually achieved through a combination of wavelength filters that divide the spectrum into mutually exclusive excitation and emission bands. It is therefore impossible in these microscopes to access the full excitation/emission spectrum of the specimen in a single image. We report on a microscope that acquired fluorescence images using illumination across the spectral range 450–680 nm; the full emission spectrum was detected simultaneously across the same range. The microscope was also combined with structured illumination optical sectioning to give three-dimensionally resolved images with improved background rejection. Full spectrum fluorescence images of biological specimens are demonstrated. As this system is more versatile than the standard fluorescence microscope, it could be of benefit in many fluorescence imaging applications.     

High resolution protein localization using soft X-ray microscopy

Soft X-ray microscopes can be used to examine whole, hydrated cells up to 10 µm thick and produce images approaching 30 nm resolution. Since cells are imaged in the X-ray transmissive 'water window', where organic material absorbs approximately an order of magnitude more strongly than water, chemical contrast enhancement agents are not required to view the distribution of cellular structures. Although living specimens cannot be examined, cells can be rapidly frozen at a precise moment in time and examined in a cryostage, revealing information that most closely approximates that in live cells. In this study, we used a transmission X-ray microscope at photon energies just below the oxygen edge (λ = 2.4 nm) to examine rapidly frozen mouse 3T3 cells and obtained excellent cellular morphology at better than 50 nm lateral resolution. These specimens are extremely stable, enabling multiple exposures with virtually no detectable damage to cell structures. We also show that silver-enhanced, immunogold labelling can be used to localize both cytoplasmic and nuclear proteins in whole, hydrated mammary epithelial cells at better than 50 nm resolution. The future use of X-ray tomography, along with improved zone plate lenses, will enable collection of better resolution (approaching 30 nm), three-dimensional information on the distribution of proteins in cells.     

Compression of fluorescence microscopy images based on the signal-to-noise estimation

Modern microscopic techniques like high-content screening (HCS), high-throughput screening, 4D imaging, and multispectral imaging may involve collection of thousands of images per experiment. Efficient image-compression techniques are indispensable to manage these vast amounts of data. This goal is frequently achieved using lossy compression algorithms such as JPEG and JPEG2000. However, these algorithms are optimized to preserve visual quality but not necessarily the integrity of the scientific data, which are often analyzed in an automated manner. Here, we propose three observer-independent compression algorithms, designed to preserve information contained in the images. These algorithms were constructed using signal-to-noise ratio (SNR) computed from a single image as a quality measure to establish which image components may be discarded. The compression efficiency was measured as a function of image brightness and SNR. The alterations introduced by compression in biological images were estimated using brightness histograms (earth's mover distance (EMD) algorithm) and textures (Haralick parameters). Furthermore, a microscope test pattern was used to assess the effect of compression on the effective resolution of microscope images.     

Evaluation of rapid volume changes of substrate-adherent cells by conventional microscopy 3D imaging

Precise measurement of rapid volume changes of substrate‐adherent cells is essential to understand many aspects of cell physiology, yet techniques to evaluate volume changes with sufficient precision and high temporal resolution are limited. Here, we describe a novel imaging method that surveys the rapid morphology modifications of living, substrate‐adherent cells based on phase‐contrast, digital video microscopy. Cells grown on a glass substrate are mounted in a custom‐designed, side‐viewing chamber and subjected to hypotonic swelling. Side‐view images of the rapidly swelling cell, and at the end of the assay, an image of the same cell viewed from a perpendicular direction through the substrate, are acquired. Based on these images, off‐line reconstruction of 3D cell morphology is performed, which precisely measures cell volume, height and surface at different points during cell volume changes. Volume evaluations are comparable to those obtained by confocal laser scanning microscopy (ΔVolume ≤ 14%), but our method has superior temporal resolution limited only by the time of single‐image acquisition, typically ～100 ms. The advantages of using standard phase‐contrast microscopy without the need for cell staining or intense illumination to monitor cell volume make this system a promising new tool to investigate the fundamentals of cell volume physiology.     

Inclined selective plane illumination microscopy adaptor for conventional microscopes

Driven by the biological sciences, there is an increased need for imaging modalities capable of live cell imaging with high spatial and temporal resolution. To achieve this goal in a comprehensive manner, three‐dimensional acquisitions are necessary. Ideal features of a modern microscope system should include high imaging speed, high contrast ratio, low photo‐bleaching and photo‐toxicity, good resolution in a 3D context, and mosaic acquisition for large samples. Given the importance of collecting data in live sample further increases the technical challenges required to solve these issues. This work presents a practical version of a microscopy method, Selective Plane Illumination Microscopy re‐introduced by Huisken et al. (Science 2004 ,305,1007–1009). This method is gaining importance in the biomedical field, but its use is limited by difficulties associated with unconventional microscope design which employs two objectives and a particular kind of sample preparation needed to insert the sample between the objectives. Based on the selective plane illumination principle but with a design similar to the Total Internal Reflection Fluorescence microscope, Dunsby (Dunsby, Opt Express 2008 ,16,20306–20316) demonstrated the oblique plane microscope (OPM) using a single objective which uses conventional sample preparation protocols. However, the Dunsby instrument was not intended to be part of a commercial microscope. In this work, we describe a system with the advantages of OPM and that can be used as an adaptor to commonly used microscopes, such as IX‐71 Olympus, simplifying the construction of the OPM and increasing performance of a conventional microscope. We named our design inclined selective plane illumination microscope (iSPIM). Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Use of a white light supercontinuum laser for confocal interference-reflection microscopy

Shortly after its development, the white light supercontinuum laser was applied to confocal scanning microscopy as a more versatile substitute for the multiple monochromatic lasers normally used for the excitation of fluorescence. This light source is now available coupled to commercial confocal fluorescence microscopes. We have evaluated a supercontinuum laser as a source for a different purpose: confocal interferometric imaging of living cells and artificial models by interference reflection. We used light in the range 460-700 nm where this source provides a reasonably flat spectrum, and obtained images free from fringe artefacts caused by the longer coherence length of conventional lasers. We have also obtained images of cytoskeletal detail that is difficult to see with a monochromatic laser.     

Fluorescence resonance energy transfer from cyan to yellow fluorescent protein detected by acceptor photobleaching using confocal microscopy and a single laser

One manifestation of fluorescence resonance energy transfer (FRET) is an increase in donor fluorescence after photobleaching the acceptor. Published acceptor‐photobleaching methods for FRET have mainly used wide‐field microscopy. A laser scanning confocal microscope enables faster and targeted bleaching within the field of view, thereby improving speed and accuracy. Here we demonstrate the approach with CFP and YFP, the most versatile fluorescent markers now available for FRET. CFP/YFP FRET imaging has been accomplished with a single laser (argon) available on virtually all laser‐scanning confocal microscopes. Accordingly, we also describe the conditions that we developed for dual imaging of CFP and YFP with the 458 and 514 argon lines. We detect FRET in a CFP/YFP fusion and also between signalling molecules (TNF‐Receptor‐Associated‐Factors or TRAFs) that are known to homo‐ and heterotrimerize. Importantly, we demonstrate that appropriate controls are essential to avoid false positives in FRET by acceptor photobleaching. We use two types of negative control: (a) an internal negative control (non‐bleached areas of the cell) and (b) cells with donor in the absence of the acceptor (CFP only). We find that both types of negative control can yield false FRET. Given this false FRET background, we describe a method for distinguishing true positive signals. In summary, we extensively characterize a simple approach to FRET that should be adaptable to most laser‐scanning confocal microscopes, and demonstrate its feasibility for detecting FRET between several CFP/YFP partners.     

Total internal reflection microscopy for live imaging of cellular uptake of sub-micron non-fluorescent particles

This paper presents a simple, high-resolution, non-fluorescent imaging technique called total internal reflection microscopy (TIRM) and demonstrates its potential application to real-time imaging of live cellular events. In addition, a novel instrument is introduced that combines the simplicity of TIRM with the specificity afforded by dual-colour total internal reflection fluorescence (TIRF) microscopy and allows sequential imaging with the two modalities. The key design considerations necessary to apply these imaging modes in a single instrument are discussed. The application of TIRM alone yielded high-resolution live images of cell adherence to a poly- l -lysine modified substrate, whereby fine cellular structures are imaged. Non-fluorescent imaging of the uptake of sub-micron–sized polymeric particles by live cells is also demonstrated. Finally, images of fluorescently labelled cells were obtained in TIRF mode, sequentially to images obtained of the same cell in TIRM mode. Visual information gained using TIRF is compared with TIRM to demonstrate that the level of cell structure information obtainable with our total internal reflection microscope is comparable with the TIRF technique.     

High-precision distance measurements and volume-conserving segmentation of objects near and below the resolution limit in three-dimensional confocal fluorescence microscopy

This study presents a method for high-precision distance measurements and for the volume-conserving segmentation of fluorescent objects with a size of the order of the microscopic observation volume. The segmentation was performed via a model-based approach, using an algorithm that was calibrated by the microscopic point spread function. Its performance was evaluated for three different fluorochromes using model images and fluorescent microspheres as test targets. The fundamental limits which the microscopic imaging process imposes on the accuracy of volume and distance measurements were evaluated in detail. A method for the calibration of the axial stepwidth of a confocal microscope is presented. The results suggest that in biological applications, 3D distances and radii of objects in cell nuclei can be determined with an accuracy of ≤ 60 nm. Using objects of different spectral signature, 3D distance measurements substantially below the lateral half width of the confocal point spread function are feasible. This is shown both theoretically and experimentally.     

Frequency domain lifetime and spectral imaging microscopy

In the femtoliter observation volume of a two-photon microscope, multiple fluorophores can be present and complex photophysics can take place. Combined detection of the fluorescence emission spectra and lifetimes can provide deeper insight into specimen properties than these two imaging modalities taken separately. Therefore, we have developed a detection scheme based on a frequency-modulated multichannel photomultiplier, which measures simultaneously the spectrum and the lifetime of the emitted fluorescence. Experimentally, the efficiency of the frequency domain lifetime measurement was compared to a time domain set-up. The performance of this spectrally and lifetime-resolved microscope was evaluated on reference specimens and living cells labeled with three different stains targeting the membrane, the mitochondria, and the nucleus.     

Application of regularized Richardson-Lucy algorithm for deconvolution of confocal microscopy images

Although confocal microscopes have considerably smaller contribution of out-of-focus light than widefield microscopes, the confocal images can still be enhanced mathematically if the optical and data acquisition effects are accounted for. For that, several deconvolution algorithms have been proposed. As a practical solution, maximum-likelihood algorithms with regularization have been used. However, the choice of regularization parameters is often unknown although it has considerable effect on the result of deconvolution process. The aims of this work were: to find good estimates of deconvolution parameters; and to develop an open source software package that would allow testing different deconvolution algorithms and that would be easy to use in practice. Here, Richardson-Lucy algorithm has been implemented together with the total variation regularization in an open source software package IOCBio Microscope. The influence of total variation regularization on deconvolution process is determined by one parameter. We derived a formula to estimate this regularization parameter automatically from the images as the algorithm progresses. To assess the effectiveness of this algorithm, synthetic images were composed on the basis of confocal images of rat cardiomyocytes. From the analysis of deconvolved results, we have determined under which conditions our estimation of total variation regularization parameter gives good results. The estimated total variation regularization parameter can be monitored during deconvolution process and used as a stopping criterion. An inverse relation between the optimal regularization parameter and the peak signal-to-noise ratio of an image is shown. Finally, we demonstrate the use of the developed software by deconvolving images of rat cardiomyocytes with stained mitochondria and sarcolemma obtained by confocal and widefield microscopes.     

An integrated approach to the study of living cells by atomic force microscopy

We describe a technique for studying living cells with the atomic force microscope (AFM) in tapping mode using a thermostated, controlled-environment culture system. We also describe the integration of the AFM with bright field, epifluorescence and surface interference microscopy, achieving the highest level of integration for the AFM thus far described. We succeeded in the continuous, long-term imaging of relatively flat but very fragile cytoplasmic regions of COS cells at a lateral resolution of about 70 nm and a vertical resolution of about 3 nm. In addition, we demonstrate the applicability of our technology for continuous force volume imaging of cultured vertebrate cells.
The hybrid instrument we describe can be used to collect simultaneously a diverse variety of physical, chemical and morphological data on living vertebrate cells. The integration of light microscopy with AFM and steady-state culture methods for vertebrate cells represents a new approach for studies in cell biology and physiology.     

Optical characterization of probes for photon scanning tunnelling microscopy

The photon scanning tunnelling microscope is a well-established member of the family of scanning near-field optical microscopes used for optical imaging at the sub-wavelength scale. The quality of the probes, typically pointed uncoated optical fibres, used is however, difficult to evaluate in a direct manner and has most often been inferred from the apparent quality of recorded optical images. Complicated near-field optical imaging characteristics, together with the possibility of topographically induced artefacts, however, has increased demands for a more reliable probe characterization technique. Here we present experimental results obtained for optical characterization of two different probes by imaging of a well-specified near-field intensity distribution at various spatial frequencies. In particular, we observe that a sharply pointed dielectric probe can be highly suitable for imaging when using p -polarized light for the illumination. We conclude that the proposed scheme can be used directly for probe characterization and, subsequently, for determination of an optical transfer function, which would allow one to deduce from an experimentally obtained image of a weakly scattering sample the field distribution existing near the sample surface in the absence of the probe.