$$\hbox {RuO}_{2}$$ Non-isothermal Thermometry

The use of a \(\hbox {RuO}_{2}\) resistor in non-isothermal measuring setup is proposed. A calculation is presented to explain the principle for a resistor obeying variable-range-hopping theory and the results are compared to measurements in the range of 11.2–30 mK for a commercial resistor. The thermometer, which measures the electron temperature, does not show overheating effects at 11.2 mK with a measuring power of \(10^{-12}\) W.     

Correlations for the Dielectric Constants of $$\hbox {H}_{2}\hbox {S}$$, $$\hbox {SO}_{2}$$SO2, and $$\hbox {SF}_{6}$$SF6

A new method is developed for correlating the static dielectric constant of polar fluids over wide ranges of conditions where few experimental data exist. Molecular dynamics simulations are used to establish the temperature and density dependence of the Kirkwood g-factor, and also the functional form for the increase of the effective dipole moment with density. Most parameters in the model are obtained entirely from simulation; a single proportionality constant is adjusted to obtain agreement with the limited experimental data. The method is applied to hydrogen sulfide (\(\hbox {H}_{2}\hbox {S}\)) and sulfur dioxide \((\hbox {SO}_{2})\), both of which are important in geochemistry but have only a few dielectric data available. The resulting correlations agree well with the available liquid data, obey physical boundary conditions at low density and at high temperature, and interpolate in density and temperature in a physically reasonable manner. In addition, we present a more conventional correlation for the dielectric constant of sulfur hexafluoride, \(\hbox {SF}_{6}\), where more data are available.     

One weight $$\mathbb {Z}_2\mathbb {Z}_4$$ additive codes

We study one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes. It is shown that the image of an equidistant \(\mathbb {Z}_2\mathbb {Z}_4\) code is a binary equidistant code and that the image of a one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive code, with nontrivial binary part, is a linear binary one weight code. The structure and possible weights for all one weight \(\mathbb {Z}_2\mathbb {Z}_4\) additive codes are described. Additionally, a lower bound for the minimum distance of dual codes of one weight additive codes is obtained.     

Superconducting epitaxial $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$ on $$\hbox {SrTiO}_{3}$$SrTiO3-buffered Si(001)

Thin films of optimally doped(001)-oriented \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) are epitaxially integrated on silicon(001) through growth on a single crystalline \(\hbox {SrTiO}_{3}\) buffer. The former is grown using pulsed-laser deposition and the latter is grown on Si using oxide molecular beam epitaxy. The single crystal nature of the \(\hbox {SrTiO}_{3}\) buffer enables high quality \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films exhibiting high transition temperatures to be integrated on Si. For a 30-nm thick \(\hbox {SrTiO}_{3}\) buffer, 50-nm thick \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) films that exhibit a transition temperature of \(\sim \)93 K, and a narrow transition width (<5 K) are achieved. The integration of single crystalline \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\updelta }\) on Si(001) paves the way for the potential exploration of cuprate materials in a variety of applications.     

Inhomogeneous Superconducting Behaviour in $$\hbox {La}_{5}\hbox {Ni}_{2}\hbox {Si}_{3}$$

The superconducting phase transition at \(T_\mathrm{c} = 2.3\) K was observed for the electrical resistivity \(\rho ({T})\) and magnetic susceptibility \(\chi (T)\) measurements in the ternary compound La\(_{5}\hbox {Ni}_{2}\hbox {Si}_{3}\) that crystallizes in the hexagonal-type structure. Although a single-phase character with the nominal stoichiometry of the synthesized sample was confirmed, a small trace of the La–Ni phase was found, being probably responsible for the superconducting behaviour in the investigated compound. The magnetization loop recorded at \({T} = 0.5\) K resembles a star-like shape which indicates that the density of the critical current can be strongly suppressed by a magnetic field. The low-\(T _{\rho }(T)\) and specific heat \({C}_\mathrm{p}({T})\) data in the normal state reveal simple metallic behaviour. No clear evidence of a phase transition to any long- or short-range order was found for \(C_\mathrm{p}(T)\) measurements in the T-range of 0.4–300 K.     

High-pressure studies of superconductivity in $$\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}$$

\(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\) crystallizes in tetragonal CeOBiS\(_{2}\) structure (S. G. P4/nmm). We have investigated the effect of pressure on magnetization measurements. Our studies suggest improved superconducting properties in polycrystalline samples of \(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\). The \(T_{\mathrm{c}}\) in our sample is 5.3 K, at ambient pressure, which is marginal but definite enhancement over \(T_{\mathrm{c}}\) reported earlier (= 5.1 K). The upper critical field \(H_{\mathrm{c}2}\)(0) is greater than 3 T, which is higher than earlier report on this material. As determined from the M–H curve, both \(H_{\mathrm{c}2}\) and \(H_{\mathrm{c}1}\) decrease under external pressure P (0 \(\le P \le \) 1 GPa). We observe a decrease in critical current density and transition temperature on applying pressure in \(\hbox {BiO}_{0.75}\hbox {F}_{0.25}\hbox {BiS}_{2}\).     

Effect of annealing temperature and $$\hbox {CdCl}_{2}$$ treatment on the photo-conversion efficiency of $$\hbox {CdTe/Zn}_{0.1}$$CdTe/Zn0.1$$\hbox {Cd}_{0.9}$$Cd0.9S thin film solar cells

We report the effects of annealing in conjunction with \(\hbox {CdCl}_{2}\) treatment on the photovoltaic properties of \(\hbox {CdTe/Zn}_{0.1}\hbox {Cd}_{0.9}\)S thin film solar cells. CdTe layer is subjected to dry \(\hbox {CdCl}_{2}\) treatment by thermal evaporation method and subsequently, heat treated in air using a tube furnace from 400 to \(500{^{\circ }}\hbox {C}\). AFM and XRD results show improved grain size and crystallographic properties of the CdTe film with dry \(\hbox {CdCl}_{2}\) treatment. This recrystallization and grain growth of the CdTe layer upon \(\hbox {CdCl}_{2}\) treatment translates into improved photo-conversion efficiencies of \(\hbox {CdTe/Zn}_{0.1}\hbox {Cd}_{0.9}\)S cell. The results of dry \(\hbox {CdCl}_{2}\) treatment were compared with conventional wet \(\hbox {CdCl}_{2}\) treatment. Photo-conversion efficiency of 5.2% is achieved for dry \(\hbox {CdCl}_{2}\)-treated cells in comparison with 2.4% of wet-treated cell at heat treatment temperature of \(425{^{\circ }}\hbox {C}\).     

Distribution of relaxation times investigation of $$\hbox {Co}^{3+}$$ doping lithium-rich cathode material $$\hbox {Li}[\hbox {Li}_{0.2} \hbox {Ni}_{0.1} \hbox {Mn}_{0.5} \hbox {Co}_{0.2}]\hbox {O}_{2}$$Li[Li0.2Ni0.1Mn0.5Co0.2]O2

The element \(\hbox {Co}^{3+}\) was introduced into lithium-rich material \(0.5\hbox {Li}_{2}\hbox {MnO}_{3} \cdot 0.5 \hbox {LiNi}_{0.5}\hbox {Mn}_{0.5}\hbox {O}_{2}\) by a polyacrylamide-assisted sol–gel method to form \(\hbox {Li}[\hbox {Li}_{0.2} \hbox {Ni}_{0.1} \hbox {Mn}_{0.5} \hbox {Co}_{0.2}]\hbox {O}_{2}\) and better electro-chemical performances were observed. Electrochemical impedance spectroscopy spectra were measured on 11 specific open circuit voltage levels on the initial charge profile. Then they were converted to the distribution of relaxation times (DRTs) g(\(\tau \)) by self-consistent Tikhonov regularization method. The obtained DRTs offered a higher resolution in the frequency domain and provided the number and the physical origins of loss processes clearly. Through the analysis of DRTs, the rapid augmentation of resistance to electronic conduction and charge transfer within the voltage range 4.46–4.7 V where the removal of \(\hbox {Li}_{2}\hbox {O}\) from \(\hbox {Li}_{2} \hbox {MnO}_{3}\) component took place was the most remarkable phenomenon and the \(\hbox {Co}^{3+}\) doping greatly reduced the resistance to electronic conduction Re. This gave us more evidence about the complicated ‘structurally integrated’ composite character of the material.     

Energy Bands and Thermoelectricity of Filled Skutterudite $$\mathrm{EuRu}_{4}\mathrm{As}_{12}$$

Density functional theory-based calculations of the elastic and electronic properties with magnetic moments of the filled skutterudite \(\mathrm{EuRu}_{4}\mathrm{As}_{12}\) have been performed in its ferromagnetic ground state. The full-potential linearized augmented plane wave (FP-LAPW) method has been used for the study presented here. The numerical values of the elastic parameters are estimated within the framework of the Voigt–Reuss–Hill approximations. The energy band structure calculation performed near the Fermi energy level shows the metallic nature of the material with a high value of Seebeck coefficient (S). The presence of an exchange splitting of Eu-4f states suggests their appreciable contribution toward the magnetic behavior. The analysis of the thermal transport properties confirms the result obtained from the electronic structure calculation with Seebeck coefficient of \(118\,\,\upmu \hbox {V/K}\) and the figure of merit (ZT) value of 0.51, at room temperature. The estimated values of S and ZT indicate the possibility of the thermoelectric applications of the sample material.     

Effect of Hafnium Impurities on the Magnetoresistance of $$\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }$$

In the present study, we investigate the influence of the hafnium (Hf) impurities on the magnetoresistance of \(\hbox {YBa}_{2}\hbox {Cu}_{3}\hbox {O}_{7-\delta }\) ceramic samples in the temperature interval of the transition to the superconducting state in constant magnetic field up to 12 T. The cause of the appearance of low- temperature “tails” (paracoherent transitions) on the resistive transitions, corresponding to different phase regimes of the vortex matter state is discussed. At temperatures higher than the critical temperature (T > \(T_\mathrm{c})\), the temperature dependence of the excess paraconductivity can be described within the Aslamazov–Larkin theoretical model of the fluctuation conductivity for layered superconductors.     

Molecular Dynamics Study of Surface Anisotropy in $$\hbox {Ag}_{60}\; \hbox {Cu}_{40}$$ Alloy at Nanoscale

In the present study, molecular dynamics simulation has been performed to investigate the anisotropic behavior of free standing \(\hbox {Ag}_{60}\; \hbox {Cu}_{40}\) nanorods. We choose different orientations with various cross sections to study the dynamics of thermal behavior of \(\hbox {Ag}_{60}\; \hbox {Cu}_{40}\) nanorods. The system is modeled using embedded atom method potentials. The radial distribution functions are analyzed to reveal the dynamic evolution of the structural behavior of nanorods with different orientations and sample sizes. The total energy and mean square displacement is also calculated to characterize the melting phenomenon of various samples. The melting temperature of the nanorods is found to be significantly size and orientation dependent, and it increases with the increase in cross-sectional area. The nanorods with low-index crystallographic surfaces such as (110) exhibit lowest melting temperature as compared to compact surfaces (111).     

Radiative Properties of Ceramic $$\hbox {Al}_{2}\hbox {O}_{3}$$, AlN,and $$\hbox {Si}_{3}\hbox {N}_{4}$$Si3N4: I. Experiments

The radiative properties of dense ceramic \(\hbox {Al}_{2}\hbox {O}_{3}\), AlN, and \(\hbox {Si}_{3}\hbox {N}_{4}\) plates are investigated from the visible to the mid-infrared region at room temperature. Each specimen has different surface finishings on different sides of the laminate. A monochromator was used with an integrating sphere to measure the directional-hemispherical reflectance and transmittance of these samples at wavelengths from 0.4 \(\upmu \hbox {m}\) to 1.8 \(\upmu \hbox {m}\). The specular reflectance was obtained by a subtraction technique. A Fourier-transform infrared spectrometer was used to measure the directional-hemispherical or specular reflectance and transmittance with appropriate accessories from about 1.6 \(\upmu \hbox {m}\) to 19 \(\upmu \hbox {m}\). All measurements were performed at near-normal incidence on either the smooth side or the rough side of the sample. The experimental observations are qualitatively interpreted considering the optical constants, surface roughness, and volume scattering and absorption.     

Synthesis,structure and thermoelectric properties of $$\mathrm{La}_{1-x}\mathrm{Na}_{x}\mathrm{CoO}_{3 }$$ perovskite oxides

Monovalent ion doped lanthanum cobaltate \(\hbox {La}_{1-x}\hbox {Na}_{x}\hbox {CoO}_{3 }\) (\(0 \le x \le 0.25\)) compositions were synthesized by the nitrate–citrate gel combustion method. All the heat treatments were limited to below 1123 K, in order to retain the Na stoichiometry. Structural parameters for all the compounds were confirmed by the Rietveld refinement method using powder X-ray diffraction (XRD) data and exhibit the rhombhohedral crystal structure with space group R-3c (No. 167). The scanning electron microscopy study reveals that the particles are spherical in shape and sizes, in the range of 0.2–0.5 \(\upmu \)m. High temperature electrical resistivity, Seebeck coefficient and thermal conductivity measurements were performed on the high density hot pressed pellets in the temperature range of 300–800 K, which exhibit p-type conductivity of pristine and doped compositions. The X-ray photoelectron spectroscopy (XPS) studies confirm the monotonous increase in \(\hbox {Co}^{4+}\) with doping concentration up to \(x = 0.15\), which is correlated with the electrical resistivity and Seebeck coefficient values of the samples. The highest power factor of \(10~\upmu \hbox {W~mK}^{-2 }\) is achieved for 10 at% Na content at 600 K. Thermoelectric figure of merit is estimated to be \({\sim }1 \times 10^{-2}\) at 780 K for 15 at% Na-doped samples.     

Thermal Emittance of $$\hbox {La}_{0.7}\hbox {Ca}_{0.3-x}\hbox {K}_x\hbox {MnO}_3$$ Coatings on Aluminum Substrate

A novel thermal control coating was presented based on the thermochromism of manganite. The pigment of K-doped manganite nanoparticles was dispersed into polymer matrix to prepare the coating with curing below 200 \(^{\circ }\)C. The nanoparticles size mainly distributes around 100–200 nm, and it shows a comparable stoichiometric ratio. The phase transition of the nanoparticles was observed from ferromagnetic metallic to paramagnetic insulator state. With increasing K doping level, the phase transition temperature increases, achieving controllable adjustment. Coating surface with and without pore defect was obtained by different polymer matrix. A sharp emittance variation was observed with increasing temperature in K-doped coating. The variation magnitude of emittance is up to 0.46, which is attractive to space thermal control. It is suggested that the pigment content of 50 wt% is sufficient to realize a large emittance variation.     

Templated synthesis and characterization of red-emitting $$\hbox {Ca}_{{1-x}}\hbox {Sr}_{1-x}\hbox {Eu}_{2x}^{3+}\hbox {SiO}_{4}$$ phosphor for LED applications

A novel attempt towards the synthesis of red-emitting europium (\(\hbox {Eu}^{3+}\))-doped \(\hbox {CaSrSiO}_{4}\) phosphors has been made through a templated strategy using non-ionic surfactant as template. The concentrations of \(\hbox {Eu}^{3+}\) in the host were altered and the optimized concentration to extract the maximum efficacy was analysed. The crystalline structure and morphologies of the synthesized phosphor were studied and analysed. The results show the aggregated rod-like morphology with a continuous porous network that shows the maximum intensity at 10 mol% of dopant.     

Microstructural and electrical transport properties of uniaxially pressed $$\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }$$ ceramic superconductors

We have studied the effect of the pelletization pressure on microstructural and electrical transport properties of superconducting ceramics with starting composition given by the formula \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2.5}\text {Cu}_{3.5}\text {O}_{10+\delta }\). The experimental data of electrical measurements was processed in order to obtain the weak-link resistivity, the orientation probability of the grains’ a-axes along a certain preferential direction, the slope of the linear part in the temperature dependence of the ab-planes resistivity, and the intrinsic effective anisotropy of the grains, of each sample. In contrast with the behaviour of \(\text {Bi}_{1.65}\text {Pb}_{0.35}\text {Sr}_2\text {Ca}_{2}\text {Cu}_{3}\text {O}_{10+\delta }\) ceramics, the Ca, Cu enriched samples exhibit a reduction of their effective anisotropy at sample level and weak links resistivity with increasing compacting pressures. In addition, a compacting pressure of around 488 MPa may affect considerably the electrical and structural parameters of the material. The results suggest that a combined effect of the pelletization pressure and the doping with Ca and Cu can be used to improve the electrical transport properties of these materials for technological applications.     

Synthesis,characterization and electrochemical performance of $$\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}$$ cathode materials for lithium ion batteries

\(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) (\(x = 0\), 0.2, 0.4, 0.6, 0.8 and 1) samples were prepared by a sol–gel process. The crystal structure of prepared samples of \(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) was characterized using an X-ray diffractometer. Different crystallographic parameters such as crystallite size and lattice cell parameters have been calculated. Scanning electron microscopy and Fourier transform infrared spectroscopy investigations were carried out, which reveal the morphology and function groups of the synthesized samples. Furthermore, electrochemical impedance spectra measurements are performed. The obtained results indicated that the highest conductivity is achieved for the \(\hbox {Li}_{2}\hbox {Ni}_{0.4}\hbox {Fe}_{0.6}\hbox {SiO}_{4}\) electrode compound. It was observed that Li–\(\hbox {Li}_{2}\hbox {Ni}_{0.4}\hbox {Fe}_{0.6}\hbox {SiO}_{4}\) battery has initial discharge capacity of 164 mAh \(\hbox {g}^{-1}\) at 0.1C rate. The cycle life performance of all \(\hbox {Li}_{2}\hbox {Ni}_{x}\hbox {Fe}_{1-x}\hbox {SiO}_{4}\) batteries ranged between 100 and 156 mAh \(\hbox {g}^{-1}\) with coulombic efficiency range between 70.9 and 93.9%.     

Structural,elastic, optoelectronic and magnetic properties of $$\mathbf{CdHo }_\mathbf{2}{} \mathbf{S}_\mathbf{4}$$ spinel: a first-principle study

We report the results of the full-potential linearized augmented plane wave (FP-LAPW) calculations on the structural, elastic, optoelectronic and magnetic properties of \(\hbox {CdHo}_{2}\hbox {S}_{4}\) spinel. Both the generalized gradient approximation (GGA) and Trans-Blaha modified Becke-Johnson potential (TB-mBJ) are used to model the exchange-correlation effects. The computed lattice parameter, internal coordinate and bulk modulus are in good agreement with the existing experimental data. According to the calculated elastic moduli, \(\hbox {CdHo}_{2}\hbox {S}_{4}\) is mechanically stable with a ductile nature and a noticeable elastic anisotropy. The ferromagnetic phase of \(\hbox {CdHo}_{2}\hbox {S}_{4}\) is energetically favourable compared to non-magnetic one, with a high magnetic moment of about 8.15 \(\upmu _{\mathrm{B}}\). The calculated band structure demonstrates that the title compound is a direct band gap semiconductor. The TB-mBJ yields a band gap of \(\sim \)1.86 and \(\sim \)2.17 eV for the minority and majority spins, respectively. The calculated optical spectra reveal a strong response in the energy range between the visible light and the extreme UV regions.