基于白光LED的可见光通信研究进展

白光LED将成为未来主要的照明光源, 这使得基于白光LED的可见光通信(VLC)在通信网络中具有一定的优势。介绍了可见光通信系统的优势及发展概况, 分析了包括通信速率的提高、全双工通信的实现以及与现有通信网络互联等关键技术, 综述了可见光通信技术的应用现状, 并展望了可见光通信技术的应用前景。     

基于白光LED的可见光通信技术研究

可见光通信是基于白光LED的新兴无线光通信技术,能够同时实现照明和通信的双重功能,适合在智能家居等领域的应用。本文对基于白光LED的室内可见光通信的研究现状及关键技术、发展趋势进行了研究。     

白光LED室内可见光通信的关键技术

可见光通信是一项新兴基于白光LED的无线光通信技术,具有发射功率高、不占用无线电频谱、无电磁干扰、无电磁辐射和节约能源等优点,能够同时实现照明和通信的双重功能。阐述了可见光通信技术的发展动态,介绍基于白光LED的室内可见光通信系统,并对提高系统整体性能的若干关键技术进行了研究讨论,为白光LED室内可见光通信系统进一步研究提供依据。     

白光LED室内可见光通信的关键技术

可见光通信是一项新兴基于白光LED的无线光通信技术,具有发射功率高、不占用无线电频谱、无电磁干扰、无电磁辐射和节约能源等优点,能够同时实现照明和通信的双重功能.阐述了可见光通信技术的发展动态,介绍基于白光LED的室内可见光通信系统,并对提高系统整体性能的若干关键技术进行了研究讨论,为白光LED室内可见光通信系统进一步研究提供依据.     

基于51单片机的LED可见光通信系统

LED可见光通信是应用前景非常广阔的新兴无线光通信技术.根据可见光通信原理,组建了基于STC89C52RC单片机的LED可见光通信系统,发射板和接收板具有较小体积和较低成本.系统链路采用直射式形式,光强度调制——直接检测技术,通过对白光LED的高速调制,利用串口调试软件验证了PC机间的LED可见光通信.实验结果表明,系统在PC机间能够实现简单的单工数据通信.     

基于白光LED的可见光通信系统及其实现

研究基于LED新型环保光源,利用OptiSystem软件搭建了一套可见光通信系统,并通过仿真对其进行性能分析,使得可见光系统在提供照明功能的同时,还可以把信号调制到LED可见光光束上进行数据传输,从而实现安全性更高、数据率更高的白光LED可见光通信。     

基于白光LED可见光通信的研究现状及应用前景

可见光通信作为当前无线光通信领域的研究热门,在过去几年取得了可喜的突破.采用白光LED作为光源,利用灯光高速明暗闪烁来传递信息的同时兼顾其在室内照明的功能,节约了能源.文章详细介绍了白光LED可见光通信的研究现状、关键技术、应用场景和发展趋势.     

室内可见光通信APD 探测电路的设计与实现

室内可见光无线通信技术是随着白光LED 照明技术的发展而兴起的无线光通信技术。在分析目前的可见光通信技术基础上,针对室内可见光通信系统的应用需求,设计了雪崩光电二极管(APD)探测电路组件。首先阐述了APD 探测电路的工作原理,其次详细设计并分析了系统各组成部分的电路结构及其功能,最后对所设计的用于室内可见光通信接收子系统的探测组件进行了相关实验测试。实验结果表明:设计有效可行,APD 探测电路具有增益高、带宽宽、温控可靠、稳定性好等优点,对室内可见光通信系统有很好的应用价值,为室内可见光通信系统进一步研究提供依据。     

基于室内可见光的通信系统性能优化分析

阐述可见光通信特点,基于发光二极管为核心的新型无线光通信技术。探讨影响白光LED传输性能的因素,白光LED传输性能的关键技术,从而提升白光LED传输性能。     

基于可见光通信的信道模型及编码性能分析

目前基于白光LED(发光二极管)的室内可见光通信信道模型的研究主要集中于理论分析,因此信道特性对系统性能的影响还不明确。文章首先分析并优化了室内白光LED通信信道理论模型,并在此基础上研究信道编解码算法,通过Simulink软件搭建信道模型和可见光通信系统来分析信道编码对系统性能的影响,得到了适合可见光通信系统信道特性的信道编码方法。     

Advances and prospects in visible light communications

Visible light communication (VLC) is an emerging technology in optical wireless communication (OWC) that has attracted worldwide research in recent years. VLC can combine communication and illumination together, which could be applied in many application scenarios such as visible light communication local area networks (VLANs), indoor localization, and intelligent lighting. In recent years, pioneering and significant work have been made in the field of VLC. In this paper, an overview of the recent progress in VLC is presented. We also demonstrate our recent experiment results including bidirectional 100 Mbit/s VLAN or Li-Fi system based on OOK modulation without blue filter. The VLC systems that we proposed are good solutions for high-speed VLC application systems with low-cost and low-complexity. VLC technology shows a bright future due to its inherent advantages, shortage of RF spectra and ever increasing popularity of white LEDs.     

Half‐duplex visible light communication using an LED as both a transmitter and a receiver

In typical visible light communication (VLC) systems, light‐emitting diodes (LEDs) are used as optical transmitters and photodiodes are used as optical receivers. Currently, many communication devices such as smart phones have a built‐in LED lamp whereas they usually do not have a built‐in photodiode. If we find a way to receive VLC signals without the need to add an additional photodiode on the communication devices, it will contribute to the spread of VLC. Therefore, we propose and demonstrate a VLC scheme without the need for a photodiode. As the first step, we investigate the characteristics of an LED as a VLC receiver and find out that an LED can also be used as a VLC receiver in certain conditions. Then, we demonstrate a half‐duplex VLC system using an LED as both an optical transmitter and an optical receiver, without the need for a photodiode. This technique could be used in various applications such as the VLC between smart phones with a built‐in LED lamp and the VLC between LED traffic lights. Copyright © 2015 John Wiley & Sons, Ltd.     

可见光通信及其关键技术研究

可见光通信系统采用白光发光二极管(LED)作为光源,因而系统具有通信与照明的双重作用,极大地节约了能源.描述了可见光通信的结构与特点,对可见光通信的一些关键技术做了简单的研究,并介绍了可见光通信的发展动态.     

ESIM‐OFDM‐based transceiver design of a visible light communication system

Visible light communication (VLC) system has been becoming a potential technology for short‐range data communication over wireless optical channel. In this paper, a real‐time state‐of‐the‐art VLC system prototype is implemented mainly based on enhanced subcarrier index modulation orthogonal frequency division multiplexing (ESIM‐OFDM) modulation scheme. The prototype has been designed using NI cDAQ hardware equipment programmed in matlab /labview . In other words, the developed VLC transceiver labview model is loaded into cDAQ to perform real‐time transmission of text data. The design mainly comprises VLC transmitter, VLC receiver, interfacing NI cDAQ with labview , and implementation of ESIM‐OFDM. It should be noted that the direct output of ESIM‐OFDM is not suitable to drive VLC transmitter circuit; therefore, the key contribution lies in making use of sigma–delta modulator to modify ESIM‐OFDM output to produce constant current signal which in turn could drive VLC transmitter. The second main contribution of the work targets the luminous properties of the designed transmitter that have experimentally been characterized using a LUX meter. Finally, the last contribution of the work is the simulation carried out to analyze the performance of the proposed system with other existing VLC modulation schemes. Copyright © 2016 John Wiley & Sons, Ltd.     

可见光通信中空间调制技术的研究进展

空间调制(SM)技术作为一种多天线传输技术,已经逐步应用到可见光通信(VLC)系统中,并成为该领域的研究热点。在介绍SM技术基本原理的基础上,从有效性、可靠性及与其他调制技术相结合三个方面分析总结了光空间调制(OSM)技术的研究进展,讨论了OSM技术的应用现状以及未来的发展趋势。     

Design of NS3 VLC module and performance analysis of ad hoc network under VLC and Wi‐Fi layers

Visible light communication (VLC) is the branch of optical wireless communications that uses light‐emitting diodes for the dual purpose of illumination and very‐high‐speed data communication. The main motivation behind the current work is finding alternatives to the saturated radio frequency spectrum, radio frequency security issue, and vulnerability to interferences. The current work is aimed at developing a module for the physical layer of a VLC‐based ad hoc network in network simulation 3. The VLC physical layer module is developed by using the optical signal modules available in the network simulator. The work also includes modelling of VLC‐based transmitter, wireless optical channel, and the optical receiver. Furthermore, the implementation and evaluation of the VLC‐based physical layer is carried out over a typical ad hoc network under different performance metrics. The designed ad hoc network is also tested under Wi‐Fi module followed by its comparison with corresponding ad hoc network under VLC module. The comparison is based on bit error rate curves, system throughput, and gain in received signal‐to‐noise ratio mainly. Finally, the suitability of different modulation schemes is also investigated in the current work for both Wi‐Fi– and VLC‐based ad hoc networks.     

可见光控门禁的研制

可见光通信作为一种无线光通信技术,是目前短距离无线通信技术研究领域的一个热点方向。本文将该技术应用在无线控制门禁的研究和设计。设计制作了可见光控门禁的光钥匙和光控锁,分析测试了白光发光二极管(LED)和光电二极管(PD)在中、高频段的光电转换特性,并结合测试结果编写了可见光控门禁的光密码的发送、接收和调制解调、编解码以及门禁控制程序等。门禁工作采用10kHz的开关键控-不归零码(OOK-NRZ)的调制白光,收发效果稳定,抗电磁干扰、安全性高和功耗低,通信距离适中,有很好的应用推广价值。     

室内可见光蜂窝网络信道特性研究

基于可见光通信(VLC)技 术的LED蜂窝网络,设想作为第5代移动通信技术在室内应用的主要备选方式之一,得到越来 越多的关注。本 文采用广义光线追踪算法对符合蜂窝布局的室内可见光信道特性进行研究,分析了不同LED 发光角度条件 下信道冲击响应、路径损耗和信道时延等信道特性。随着LED半功率角从30°增大到60°, 系统路径损耗 与信道时延也整体增大,其中总体路径损耗变化范围为32～36.5dB ,信道时延的变化范围为0.4～1.5ns。