Mikroverfahrenstechnik: Komponenten – Anlagenkonzeption – Anwenderakzeptanz – Teil 3

Microtechnology: Components – Plant Concepts – User Acceptance Many activities over the last five or so years have focussed on the thus far underdeveloped field of carrying out reactions on small scales. Due to the rapid development of new components, this paper touches on recent developments only in a compressed form. An important point is the analysis of possible plant concepts for microreactors and whether these are a sensible option. Due to the enormous size difference between the microchannels and the fluid periphery of possible components this is not just a technical question, it touches on the microtechnology concept as a whole. The direction in which the field should be developed and which measures can be taken to influence its development, are questions that are addressed here with respect to the big industrial interest in microreactors.     

Mikroverfahrenstechnik: Komponenten – Anlagenkonzeption – Anwenderakzeptanz – Teil 2

Microtechnology: Components – Plant Concepts – User Acceptance Many activities over the last five or so years have focussed on the thus far underdeveloped field of carrying out reactions on small scales. Due to the rapid development of new components, this paper touches on recent developments only in a compressed form. An important point is the analysis of possible plant concepts for microreactors and whether these are a sensible option. Due to the enormous size difference between the microchannels and the fluid periphery of possible components this is not just a technical question, it touches on the microtechnology concept as a whole. The direction in which the field should be developed and which measures can be taken to influence its development, are questions that are addressed here with respect to the big industrial interest in microreactors.     

New Intermediates and Dyes for Synthetic–polymer Fibres 4–(4–Methoxyanilino)–3–nitro–l, 8–naphthalimides

The synthesis of a series of 4–(4–methoxyanilinoj–3–nitro–1, 8–naphthalimides by condensation of amines with 4–(4–methoxyanilino)–3–nitronaphthalene–l, 8–dicarboxylic anhydride, and also by condensation of 4–halogeno–3–nitro–1, 8–naphthalimides with 4–methoxyaniline is described. They dye synthetic–polymer fibres, particularly polyesters, deep orange of excellent fastness properties. In presence of strong bases, e. g. 3–aminopropan–l–ol, the 4–arylamino group is replaced, giving a series of yellow dyes. A method is described for preparing the dyes without isolation of intermediate stages.     

4–Hydroxy–3–arylamino–l, 8–naphthalimides and 3–(and 4–) hydroxy–2–(and 5–) arylamino–7H–bcnzimidazo–(2, l–a)benz(d,e)isoquinolin–7–ones. Red dyes for synthetic–polymer fibres

4–Hydroxy–1, 8–naphthalimides and the isomer mixtures of'3–and 4–hydroxy–7 H–benzimidazo–(2, l–a)–benz(d, e)–isoquinolin–7–ones were coupled with diazotised arylamines to yield orange–red to bluish–red dyes having good coloration properties and excellent fastness to light on polyester fibres. Structure–property relationships in the dyes are discussed with respect to the nature of the substituents in the imide, imidazole and arylazo moieties.     

Substituent Effects on the Colour,Dyeing and Fastness Properties of Trisubstituted 4–N–β–Hydroxyethyl–N–β–Cyanoethylaminoazobenzenes

School of Chemistry and Chemical Technology University of Bradford Bradford West Yorkshire BD7 1DP The synthesis of a series of 2′, 4′, 6′-trisubstituted derivatives of 4–N–β–hydroxyethyl–4– N–β–cyanoeth ylaminoazobenzene is reported, and the effect of the nature of the substituents on the colour, dyeing and fastness properties of these dyes is described. The dyes coloured synthetic–polymer fibres well, with the exception of those containing a methylsulphonyl group, which gave weaker dyeings on polyester. Dyes substituted by 2′-nitro groups tended to have poor light fastness, and reasons for the variations in the light fastness of monoazo dyes of this type are discussed.     

Keramische Membranen: Materialien – Bauteile – potenzielle Anwendungen

Ceramic membranes can be divided into dense and porous membranes. The materials, microstructure, and manufacturing methods are described and insights into current research topics are given. By adapting the material properties and tailoring microstructures, membranes and components suitable for a variety of processes can be developed. In applications, a distinction can be made between pure gas separation and membrane reactors. In the latter ones, in addition to gas separation, a chemical reaction takes place on one or both sides of the membrane. Membrane reactors can be used to produce basic chemicals or synthetic fuels. The supply of gases can be of interest for power plants, cement, steel or glassworks as well as for the medical sector or for mobile applications.     

The Photofading of 1 –Arylazo–2–naphthols in Solution.

1–(Substituted phenylazo)–2–naphthols with a nitro group positioned para– or ortho– to the azo group, show anomalous photofading behaviour in methanol, i. e., their fastness to light is very much lower than that of similar compounds. On the other hand, although 1 –(o–nitrophenylazo)–2–naphthol (II) in alcoholic solvents faded to give similar products via photooxidative and/or photoreductive reactions, little photoreduction of the nitro group was detected, and the rate of photofading of II was lower than that of la. The contribution of intramolecular interaction, such as intramolecular bifurcated hydrogen bonding, involving the o–nitro group, azo group and o–hydroxy group of 1–(o–nitrophenylazo)–2–naphthol, are also discussed. Photochemical reaction of 1–(p–nitrophenylazo)–2–naphthol (la) in methanol, ethanol or 2–propanol produces not only oxidative but also reductive products, while photochemical reaction of la in acetone gives only oxidative products. From these results and earlier observations, it is suggested that the anomalous photofading of la is a substrate–specific phenomenon, and may be caused by photo–reduction of the nitro and azo groups to amino groups by the substrate, instead of the normal photo–oxidation of the hydrazone tautomer by singlet oxygen.     

Phase Evolution of SiO2–Al2O3–ZnO–CaO–ZrO2–TiO2‐Based Glass with Added Y‐PSZ Particles

Yttria partially stabilized zirconia Y‐PSZ/glass‐ceramic composites were prepared by reaction sintering using powder mixtures of a SiO₂–Al₂O₃–ZnO–CaO–ZrO₂–TiO₂‐based glass and yttria partially stabilized zirconia (Y‐PSZ). The glass crystallized during sintering at temperatures of 1173, 1273, and 1373 K to give a glass‐ceramic matrix for high‐temperature protecting coatings. With the increasing firing time, the added zirconia reacted with the base glass and a glass‐ceramic material with dispersed zircon particles was prepared in situ. Furthermore, the added zirconia changed the crystallization behavior of the base glass, affecting the shape, amount, and distribution of zircon in the microstructure. The bipyramid‐like zircon grains with imbedded residual zirconia particles turned out to have two growth mechanisms: the inward growth and the outward growth, and its rapid growth was mainly dominated by the later one. For comparison, the referenced glass‐ceramic was prepared by sintering using exclusive glass granules and its crystallization behavior at 1173–1373 K was examined as well. Scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDS), transmission electron microscopy (TEM), and X‐ray diffraction (XRD) were used to characterize the crystallization behavior of the base glass and the phase evolution of the Y‐PSZ/glass‐ceramic composites.     

Fat – carbohydrate – protein: Storage in plant seeds

Storage compounds of seeds are carbohydrates, proteins and oils or fats. They are inter‐convertible in metabolism. Most seeds store the whole complement of these compound classes though one or the other may dominate. The storage compounds supply material and energy to young growing seedlings and are of commercial interest of man for food and fuel.