Optimal siting and sizing of hydrogen refueling stations considering distributed hydrogen production and cost reduction for regional consumers

Hydrogen fuel cell vehicles are currently facing two difficulties in achieving their general use: the lack of hydrogen refueling stations and high hydrogen prices. Hydrogen refueling stations are the middle stage for delivering hydrogen from its sources to consumers, and their location could be affected by the distributed locations of hydrogen sources and consumers. The reasonable siting and sizing of hydrogen refueling stations could both improve the hydrogen infrastructure and reduce regional consumers' cost of using hydrogen. By considering the hydrogen life cycle cost and using a commercial volume forecasting model, this paper creates a relatively thorough and comprehensive model for hydrogen station siting and sizing with the objective of achieving the optimal costs for consumers using hydrogen. The cost‐based model includes the selection of the hydrogen sources, transportation methods, and storage methods, and thus, the hydrogen supply chain can also be optimized. A numerical example is established in Section 4 with the solution algorithm and results.     

Near-term location planning of hydrogen refueling stations in Yokohama City

Establishing hydrogen refueling stations is key to transition into a hydrogen economy. To achieve this, a near-term, city-level roll-out plan is required, as Japan is shifting from the demonstration to implementation stage of a hydrogen economy. The aim of this study was to devise a plan to identify near-term locations to build hydrogen refueling stations in Yokohama City, Japan. Our plan provides information on the potential location of hydrogen refueling stations for 2020–2030. We considered mobile and parallel-siting type refueling stations; the locations of these stations were determined by matching the supply and demand estimated from hybrid vehicle ownership data and the available space in existing gas stations based on a safety perspective. The results reaffirmed the importance of planning the locations of hydrogen refueling stations and highlighted the suitability of using mobile-type stations. This was based on the uncertainty in fuel demand for fuel cell vehicles during the implementation stage of the hydrogen economy.     

Developing an infrastructure for hydrogen vehicles: a Southern California case study

We have examined the technical feasibility and economics of developing a hydrogen vehicle refueling infrastructure for a specific area where zero emission vehicles are being considered, Southern California. Potential hydrogen demands for zero emission vehicles are estimated. We then assess in detail several near term possibilities for producing and delivering gaseous hydrogen transportation fuel including: (1) hydrogen produced from natural gas in a large, centralized steam reforming plant, and truck delivered as a liquid to refueling stations; (2) hydrogen produced in a large, centralized steam reforming plant, and delivered via small scale hydrogen gas pipeline to refueling stations; (3) by-product hydrogen from chemical industry sources; (4) hydrogen produced at the refueling station via small scale steam reforming of natural gas; and (5) hydrogen produced via small scale electrolysis at the refueling station. The capital cost of infrastructure and the delivered cost of hydrogen are estimated for each hydrogen supply option. Hydrogen is compared to other fuels for fuel cell vehicles (methanol, gasoline) in terms of vehicle cost, infrastructure cost and lifecycle cost of transportation. Finally, we discuss possible scenarios for introducing hydrogen as a fuel for fuel cell vehicles.     

Hydrogen refueling stations and fuel cell buses four year operational analysis under real-world conditions

Worldwide about 550 hydrogen refueling stations (HRS) were in operation in 2021, of which 38% were in Europe. With their number expected to grow even further, the collection and investigation of real-world station operative data are fundamental to tracking their activity in terms of safety issues, performances, maintenance, reliability, and energy use. This paper analyses the parameters that characterize the refueling of 350 bar fuel cell buses (FCB) in five HRS within the 3Emotion project. The HRS are characterized by different refueling capacities, hydrogen supply schemes, storage volumes and pressures, and operational strategies. The FCB operate over various duty cycles circulating on urban and extra-urban routes. From data logs provided by the operators, a dataset of four years of operation has been created. The results show a similar hydrogen amount per fill distribution but quite different refueling times among the stations. The average daily mass per bus and refueling time are around 14.62 kg and 10.28 min. About 50% of the total amount of hydrogen is dispensed overnight, and the refueling events per bus are typically every 24 h. On average, the buses' time spent in service is 10 h per day. The hydrogen consumption is approximately 7 kg/100 km, a rather effective result reached by the technology. The station utilization is below 30% for all sites, the buses availability hardly exceeds 80%.     

Eliciting preferences on the design of hydrogen refueling infrastructure

Hydrogen vehicles are already a reality, However, consumers will be reluctant to purchase hydrogen vehicles (or any other alternative fuel vehicle) if they do not perceive the existence of adequate refueling infrastructure that reduces the risk of running out of fuel regularly while commuting to acceptable levels. This fact leads to the need to study the minimum requirements in terms of fuel availability required by drivers to achieve a demand for hydrogen vehicles beyond potential early-adopters.This paper studies consumer preferences in relation to the design of urban hydrogen refueling infrastructure. To this end, the paper analyzes the results of a survey carried out in Andalusia, a region in southern Spain, on drivers' current refueling tendencies, their willingness to use hydrogen vehicles and their minimum requirements (maximum distance to be traveled to refuel and number of stations in the city) when establishing a network of hydrogen refueling stations in a city. The results show that consumers consider the existence in cities of an infrastructure with a number of refueling stations ranging from approximately 10 to 20% of the total number of conventional service stations as a requisite to trigger the switch to the use of hydrogen vehicles. In addition, these stations should be distributed in response to the drivers’ preferences to refuel close to home.     

Review on equipment configuration and operation process optimization of hydrogen refueling station

The construction of hydrogenation infrastructure is important to promote the large-scale development of hydrogen energy industry. The technical performance of hydrogen refueling station (HRS) largely determines the refueling efficiency and cost of hydrogen fuel cell vehicles. This paper systematically lists the hydrogen refueling process and the key equipment applicable in the HRS. It comprehensively reviews the key equipment configuration from the hydrogen supply, compression, storage and refueling of the HRS. On the basis of the parameter selection and quantity configuration method, the process optimization technology related to the equipment utilization efficiency and construction cost was quantitatively evaluated. Besides, the existing problems and prospects are put forward, which lays the foundation for further research on the technical economy of HRSs.     

Integrated planning method of green hydrogen supply chain for hydrogen fuel cell vehicles

To satisfy the growing refueling demand of hydrogen fuel cell vehicles (HFCVs) with carbon-free hydrogen supply, this paper proposes an integrated planning method of green hydrogen supply chain. First, the k-shorted path method is introduced to analyze HFCV refueling load considering vehicle travel habits and routing diversity. Second, based on it, a two-stage integrated planning model is established to minimize the total investment and operation cost. The construction of hydrogen refueling stations, electrolysis-based hydrogen generation stations and hydrogen pipelines are coordinated with their operating constraints, constituting the green hydrogen supply chain, in which hydrogen storage is also an important part for consideration to address variable renewable power. Then, the proposed model is reformulated as a mixed integer linear programing (MILP) problem solved efficiently. Finally, the case studies are carried out on an urban area in Xi'an China to verify the validity and correctness of the proposed method. The results show that the integrated planning can realize synergy benefits. The influence of electricity prices and k values is also discussed.     

A solution to renewable hydrogen economy for fuel cell buses – A case study for Zhangjiakou in North China

Fuel cell vehicles fueled with renewable hydrogen is recognized as a life-cycle carbon-free option for the transport sector, however, the profitability of the H₂ pathway becomes a key issue for the FCV commercialization. By analyzing the actual data from the Zhangjiakou fuel cell transit bus project, this research reveals it is economically feasible to commercialize FCV in areas with abundant renewable resources. Low electricity for water electrolysis, localization of H₂ supply, and curtailed end price of H₂ refueling effectively reduce the hydrogen production, delivery and refueling cost, and render a chance for the profitability of refueling stations. After the fulfillment of the intense deployment of both vehicles and hydrogen stations for the 2022 Winter Olympics, the H₂ pathway starts to make a profit thereafter. The practices in the Zhangjiakou FCB project offer a solution to the hydrogen economy, which helps to break the chicken-egg dilemma of vehicles and hydrogen infrastructure.     

Single-tank storage versus multi-tank cascade system in hydrogen refueling stations for fuel cell buses

Many countries in Europe are investing in fuel cell bus technology with the expected mobilization of more than 1200 buses across Europe in the following years. The scaling-up will make indispensable a more effective design and management of hydrogen refueling stations to improve the refueling phase in terms of refueling time and dispensed quantity while containing the investment and operation costs. In the present study, a previously developed dynamic lumped model of a hydrogen refueling process, developed in MATLAB, is used to analyze tank-to-tank fuel cell buses (30–40 kg_H2 at 350 bar) refueling operations comparing a single-tank storage with a multi-tank cascade system. The new-built Aalborg (DK) hydrogen refueling station serves as a case study for the cascade design. In general, a cascading refueling approach from multiple storage tanks at different pressure levels provides the opportunity for a more optimized management of the station storage, reducing the pressure differential between the refueling and refueled tanks throughout the whole refueling process, thus reducing compression energy. This study demonstrates the validity of these aspects for heavy-duty applications through the technical evaluation of the refueling time, gas heating, compression energy consumption and hydrogen utilization, filling the literature gap on cascade versus single tank refueling comparison. Furthermore, a simplified calculation of the capital and operating expenditures is conducted, denoting the cost-effectiveness of the cascade configuration under study. Finally, the effect of different pressure switching points between the storage tanks is investigated, showing that a lower medium pressure usage reduces the compression energy consumption and increases the station flexibility.     

Economic analysis of near-term California hydrogen infrastructure

A detailed economics model of hydrogen infrastructure in California has been developed and applied to assess several potential fuel cell vehicle deployment rate and hydrogen station technology scenarios. The model accounts for all of the costs in the hydrogen supply chain and specifically examines a network of 68 planned and existing hydrogen stations in terms of economic viability and dispensed hydrogen cost. Results show that (1) current high-pressure gaseous delivery and liquid delivery station technologies can eventually be profitable with relatively low vehicle deployment rates, and (2) the cost per mile for operating fuel cell vehicles can be lower than equivalent gasoline vehicles in both the near and long term.     

Analysis of a “cluster” strategy for introducing hydrogen vehicles in Southern California

The cost and logistics of building early hydrogen refueling infrastructure are key barriers to the commercialization of fuel cell vehicles. In this paper, we explore a “cluster strategy” for introducing hydrogen vehicles and refueling infrastructure in Southern California over the next decade, to satisfy California's Zero Emission Vehicle regulation. Clustering refers to coordinated introduction of hydrogen vehicles and refueling infrastructure in a few focused geographic areas such as smaller cities (e.g. Santa Monica, Irvine) within a larger region (e.g. Los Angeles Basin). We analyze several transition scenarios for introducing hundreds to tens of thousands of vehicles and 8–42 stations, considering:     

Life-cycle assessment of diesel, natural gas and hydrogen fuel cell bus transportation systems

The Sustainable Transport Energy Programme (STEP) is an initiative of the Government of Western Australia, to explore hydrogen fuel cell technology as an alternative to the existing diesel and natural gas public transit infrastructure in Perth. This project includes three buses manufactured by DaimlerChrysler with Ballard fuel cell power sources operating in regular service alongside the existing natural gas and diesel bus fleets. The life-cycle assessment (LCA) of the fuel cell bus trial in Perth determines the overall environmental footprint and energy demand by studying all phases of the complete transportation system, including the hydrogen infrastructure, bus manufacturing, operation, and end-of-life disposal. The LCAs of the existing diesel and natural gas transportation systems are developed in parallel. The findings show that the trial is competitive with the diesel and natural gas bus systems in terms of global warming potential and eutrophication. Emissions that contribute to acidification and photochemical ozone are greater for the fuel cell buses. Scenario analysis quantifies the improvements that can be expected in future generations of fuel cell vehicles and shows that a reduction of greater than 50% is achievable in the greenhouse gas, photochemical ozone creation and primary energy demand impact categories.     

Cost of a potential hydrogen-refueling network for heavy-duty vehicles with long-haul application in Germany 2050

Long-distance road-freight transport emits a large share of Germany's greenhouse gas (GHG) emissions. A potential solution for reducing GHG emissions in this sector is to use green hydrogen in fuel cell electric vehicles (FC-HDV) and establish an accompanying hydrogen refueling station (HRS) network. In this paper, we apply an existing refueling network design model to a HDV-HRS network for Germany until 2050 based on German traffic data for heavy-duty trucks and estimate its costs. Comparing different fuel supply scenarios (pipeline vs. on-site), The on-site scenario results show a network consisting of 137 stations at a cost of 8.38 billion € per year in 2050 (0.40 € per vehicle km), while the centralized scenario with the same amount of stations shows a cheaper cost with 7.25 billion euros per year (0.35 € per vehicle km). The hydrogen cost (LCOH) varies from 5.59 €/kg (pipeline) to 6.47 €/kg (on-site) in 2050.     

Dynamic planning and energy management strategy of integrated charging and hydrogen refueling at highway energy supply stations considering on-site green hydrogen production

The layout of electric vehicles charging stations and hydrogen refueling stations (HRSs) is more and more necessary with the development of electric vehicles (EVs) and progress in hydrogen energy storage technology. Due to the high costs of HRSs and the low demand for hydrogen, it is difficult for independent HRSs to make a profit. This study focuses on the dynamic planning of energy supply stations on highways in the medium and long term, considering the growth of EV charging demand and the change in the proportion of hydrogen fuel cell vehicles (HFCVs). Based on the perspective of renewable energy generators (REGs), this study seeks the dynamic optimal configuration and comprehensive benefits of adding HRS and battery to existing EVCS considering the travel rules of new energy vehicles (NEVs). The results show that (1) It is profitable for REGs to invest in HRSs; (2) The economy of investment in batteries by REGs depends on the source-load matching. It is feasible only when the output of renewable energy is difficult to meet the demand. (3) The business model of REGs producing hydrogen on-site and supplying both electricity and hydrogen is feasible.     

Development of a Hydrogen Refueling Station Design Tool

In the last couple of decades, there has been a growing concern in what effects fossil fuels are having on the environment, resulting in governments and governing organizations issuing stringent emission standards in an effort to curve their environmental damage. To meet these new standards, the transportation industry has been conducting research into alternative fuels, such as hydrogen, but one critical problem utilizing hydrogen is that there is almost no infrastructure. A network of hydrogen refueling stations similar to modern gasoline stations will be required to be constructed to meet future demand. The hydrogen refueling station model was created to aid in designing hydrogen facilities, thus accelerating their development while reducing design cost. A model was created using Simulink consisting of an electrolyzer that generates hydrogen, a compressor, numerous storage tanks, a dispensing unit that transfers hydrogen, and a vehicle component that consumes hydrogen fuel. The model was validated using data from existing hydrogen refueling stations, and the data obtained from testing the previous version of the hydrogen refueling station model to determine model accuracy and if the model has improved. The model has demonstrated that it can produce reasonable results for a station's performance and has improved compared to the previous version.     

The role of renewable fuel supply in the transport sector in a future decarbonized energy system

Battery electric vehicles (BEVs) and fuel cell electric vehicles (FCEVs) have been identified as two electromobility options which can help to achieve GHG emission reduction targets in the transport sector. However, both options will also impact the future energy system characterized by integration of various demand sectors and increasing intermittent power generation. The objective of this paper is to examine the optimal mix of both propulsion systems and to analyze the cost for renewable fuel supply. We propose a generic approach for dimensioning of fast charging and hydrogen refueling stations and optimization of the fuel supply system. The model is applied in a case study for passenger cars on German highways. The results indicate that a parallel build-up of stations for both technologies does not increase the overall costs. Moreover, the technology combination is also an optimal solution from the system perspective due to synergetic use of hydrogen but limited efficiency losses. Hence, BEVs and FCEVs should jointly contribute to the decarbonization of the future energy system.     

Two-tier pressure consolidation operation method for hydrogen refueling station cost reduction

An operation strategy known as two-tier “pressure consolidation” of delivered tube-trailers (or equivalent supply storage) has been developed to maximize the throughput at gaseous hydrogen refueling stations (HRSs) for fuel cell electric vehicles (FCEVs). The high capital costs of HRSs and the consequent high investment risk are deterring growth of the infrastructure needed to promote the deployment of FCEVs. Stations supplied by gaseous hydrogen will be necessary for FCEV deployment in both the near and long term. The two-tier pressure consolidation method enhances gaseous HRSs in the following ways: (1) reduces the capital cost compared with conventional stations, as well as those operating according to the original pressure consolidation approach described by Elgowainy et al. (2014) [1], (2) minimizes pressure cycling of HRS supply storage relative to the original pressure consolidation approach; and (3) increases use of the station's supply storage (or delivered tube-trailers) while maintaining higher state-of-charge vehicle fills.     

Node-based vs. path-based location models for urban hydrogen refueling stations: Comparing convenience and coverage abilities

For optimizing locations of hydrogen refueling stations, two popular approaches represent fuel demands as either nodes or paths, which imply different refueling behavior and definitions of convenience. This paper compares path-based vs. node-based models from the perspective of minimizing total additional travel time and feasibly covering all demands with the same number of stations. For this comparison, two new station location models are introduced that extend the Flow Capturing Location Model (FCLM) and p-Median Problem (PMP) by consistently defining upper limits on vehicle driving range and maximum inconvenience on refueling trips. Results for an idealized metropolitan area and Orlando, Florida show that path-based refueling substantially reduces wasteful travel time for refueling and covers more demand feasibly and more equitably in most scenarios. Path-based models incorporate the fact that residents of a zone regularly interact with other zones; therefore, individual stations can cover flows originating both near and far from their locations. This study suggests that path-based approaches to planning hydrogen refueling infrastructure enable more people in more neighborhoods to refuel fuel-cell vehicles without wasting excessive time or running out of fuel.     

Improving hydrogen refueling stations to achieve minimum refueling costs for small bus fleets

Fuel cell vehicles using green hydrogen as fuel can contribute to the mitigation of climate change. The increasing utilization of those vehicles creates the need for cost efficient hydrogen refueling stations. This study investigates how to build the most cost efficient refueling stations to fuel small fleet sizes of 2, 4, 8, 16 and 32 fuel cell busses. A detailed physical model of a hydrogen refueling station was built to determine the necessary hydrogen storage size as well as energy demand for compression and precooling of hydrogen. These results are used to determine the refueling costs for different station configurations that vary the number of storage banks, their volume and compressor capacity.It was found that increasing the number of storage banks will decrease the necessary total station storage volume as well as energy demand for compression and precooling. However, the benefit of adding storage banks decreases with each additional bank. Hence the cost for piping and instrumentation to add banks starts to outweigh the benefits when too many banks are used. Investigating the influence of the compressor mass flow found that when fueling fleets of 2 or 4 busses the lowest cost can be reached by using a compressor with the minimal mass flow necessary to refill all storage banks within 24 h. For fleets of 8, 16 and 32 busses, using the compressor with the maximum investigated mass flow of 54 kg/h leads to the lowest costs.     

世界各国加快氢能源市场化步伐——记第18届世界氢能大会(WHEC 2010)

2010年5月在德国埃森召开的"第18届世界氢能大会"上,来自美国、德国、日本、中国等国家的代表介绍了各自国家最新的氢能进展。中国科技部部长万钢出席大会并发言指出:中国要制订国家氢能规划,加大对氢能的投入,扩大氢能示范和应用,加强氢能的国际合作。美国能源部Nancy L Garland博士和Michacel Mills介绍了美国氢能的总体情况,指出:目前美国每年生产5000×104m3氢气,拥有氢气管道3000km以上,现有氢燃料电池轿车230多辆,氢燃料电池公共汽车130多辆,加氢站约200座。在燃料电池商业化方面,美国仍存在着技术上和经济性方面的障碍。在2007~2010财政年度,美国通过立法和各类货款、补贴,进一步加大了对氢能的扶持力度,美国能源部多次联合其他机构,召开氢能基础设施研讨会,就降低燃料电池成本、氢能政策、税收、碳税、氢能信息和教育、燃料电池革新方向,以及新的商业模式等进行讨论。目前,美国加州是美国最积极推进氢燃料电池技术与示范的州,该州预计于2016~2018年,其氢燃料电池轿车数量将达到54300辆,并计划进一步发展氢能高速公路。德国国家全资公司NOW公司总经理波霍夫博士等人介绍了德国的氢能进展。主要内容包括:德国准备到2015年,共建造1000座加氢站,将为10×104辆氢燃料电池车提供氢气;德国在氢气来源方面,2020年以前主要来源于副产氢气和天然气制氢,2030年以后主要依靠煤制氢(集合CO2捕集)、风能制氢、生物质能制氢等。日本为了尽快研发、推广燃料电池车,采取了全额投入经费的办法,委托日本产业省(METI)的全资公司VEDO公司负责管理"日本氢能和燃料电池示范项目(JHFC)",该项目的目标之一,就是到2025年,在全日本建立1000座加氢站。