Fabrication and intermolecular interactions of silk fibroin/hydroxybutyl chitosan blended nanofibers

The native extracellular matrix (ECM) is composed of a cross-linked porous network of multifibril collagens and glycosaminoglycans. Nanofibrous scaffolds of silk fibroin (SF) and hydroxybutyl chitosan (HBC) blends were fabricated using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and trifluoroacetic acid (TFA) as solvents to biomimic the native ECM via electrospinning. Scanning electronic microscope (SEM) showed that relatively uniform nanofibers could be obtained when 12% SF was blended with 6% HBC at the weight ratio of 50:50. Meanwhile, the average nanofibrous diameter increased when the content of HBC in SF/HBC blends was raised from 20% to 100%. Fourier transform infrared spectra (FTIR) and (13)C nuclear magnetic resonance (NMR) showed SF and HBC molecules existed in hydrogen bonding interactions but HBC did not induce conformation of SF transforming from random coil form to β-sheet structure. X-ray diffraction (XRD) confirmed the different structure of SF/HBC blended nanofibers from both SF and HBC. Thermogravimetry-Differential thermogravimetry (TG-DTG) results demonstrated that the thermal stability of SF/HBC blend nanofibrous scaffolds was improved. The results indicated that the rearrangement of HBC and SF molecular chain formed a new structure due to stronger hydrogen bonding between SF and HBC. These electrospun SF/HBC blended nanofibers may provide an ideal tissue engineering scaffold and wound dressing.     

Supercritical carbon dioxide assisted fabrication of biomimetic sodium alginate/silk fibroin nanofibrous scaffolds

In this study, biomimetic sodium alginate (SA)/silk fibroin (SF) scaffolds were successfully fabricated by supercritical CO₂ technology. The SA/SF scaffolds exhibited an interconnected porous and extracellular matrix (ECM)-like nanofibrous structures. Moreover, the SA microparticles were embedded in the SF scaffolds. Increasing the content of SA microparticles could improve tensile strength and compressive strength of the SF scaffolds and reduce the porosity of the SF scaffolds. The addition of the SA microparticles could also regulate the degradation rate of the SA/SF scaffolds. Furthermore, the results of in vitro biocompatibility evaluation, indicated that the SA/SF scaffolds exhibited no obvious cytotoxicity and higher cell adhesion ability and were more favorable for L929 fibroblasts proliferation than pure SF scaffolds. Therefore, the SA/SF scaffolds with ECM-like nanofibrous and interconnected porous structure have potential application in skin tissue engineering.     

Preparation and characterization of polyhydroxybutyrate‐co‐hydroxyvalerate/silk fibroin nanofibrous scaffolds for skin tissue engineering

Nanofibrous scaffolds were obtained by co‐electrospinning poly (3‐hydroxybuty‐rate‐co‐3‐hydroxyvalerate) (PHBV) and fibroin regenerated from silk in different proportions using 1,1,1,3,3,3‐hexafluoro‐2‐isopropanol (HFIP) as solvent. Field emission scanning electron microscope (FESEM) investigation showed that the fiber diameters of the nanofibrous scaffolds ranged from 190 to 460 nm. X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy analysis (FT‐IR) showed that the main structure of silk fibroin (SF) in the nanofibrous scaffold was β‐sheet. Compared to the PHBV nanofibrous scaffold, the surface hydrophilicity and water‐uptake capability of the PHBV/SF nanofibrous scaffold with 50/50 were improved. The results of cell adhesion experiment showed that the fibroblasts adhered more to the PHBV/SF nanofibrous scaffold with 50/50 than the pure PHBV nanofibrous scaffold. The proliferation of fibroblast on the PHBV/SF nanofibrous scaffold with 50/50 was higher than that on the pure PHBV nanofibrous scaffold. Our results indicated that the PHBV/SF nanofibrous scaffold with 50/50 may be a better candidate for biomedical applications such as skin tissue engineering and wound dressing. POLYM. ENG. SCI., 55:907–916, 2015. © 2014 Society of Plastics Engineers     

Green electrospun nanocuprous oxide–poly(ethylene oxide)–silk fibroin composite nanofibrous scaffolds for antibacterial dressings

Cuprous oxide (Cu₂O) nanoparticles have attracted extensive attention because of their excellent optical, catalytic, antibacterial, and antifungal properties and low cost. Nano-Cu₂O–poly(ethylene oxide) (PEO)–silk fibroin (SF) composite nanofibrous scaffolds (CNSs) were fabricated through green electrospinning to impart excellent antibacterial properties onto nanofibrous scaffolds. Scanning electron microscopy revealed that the nanofibers became more nonuniform and appeared more and more as beads in the nanofibers with increasing nano-Cu₂O concentration, and no obvious morphological changes were observed after 75% EtOH vapor treatment. Transmission electron microscopy and X-ray photoelectron spectroscopy demonstrated that nano-cuprous oxide (nano-Cu₂O) was successfully loaded into the PEO–SF nanofibers. Fourier transform infrared–attenuated total reflectance spectroscopy results indicate that nano-Cu₂O did not induce SF conformation from random coils to β sheets. The SF conformation converted from random coils to β sheets after 75% EtOH vapor treatment. The results of water contact angle testing and swelling property measurement clarified that nano-Cu₂O–PEO–SF CNSs possessed outstanding hydrophilicity. Nano-Cu₂O–PEO–SF CNSs exhibited better antibacterial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria than PEO–SF nanofibrous scaffolds, and the antibacterial activity increased with increasing nano-Cu₂O concentration. Cell viability studies with pig iliac endothelial cells demonstrated that nano-Cu₂O–PEO–SF CNSs had no cytotoxicity. Nano-Cu₂O–PEO–SF CNSs are expected to be ideal biomimetic antibacterial dressings for wound healing. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47730.     

Nanofibrous scaffold prepared by electrospinning of poly(vinyl alcohol)/gelatin aqueous solutions

A series of nanofibrous scaffolds were prepared by electrospinning of poly(vinyl alcohol) (PVA)/gelatin aqueous solution. PVA and gelatin was dissolved in pure water and blended in full range, then being electrospun to prepared nanofibers, followed by being crosslinked with glutaraldehyde vapor and heat treatment to form nanofibrous scaffold. Field emission scanning electron microscope (FESEM) images of the nanofibers manifested that the fiber average diameters decreased from 290 to 90 nm with the increasing of gelatin. In vitro degradation rates of the nanofibers were also correlated with the composition and physical properties of electrospinning solutions. Cytocompatibility of the scaffolds was evaluated by cells morphology and MTT assay. The FESEM images revealed that NIH 3T3 fibroblasts spread and elongated actively on the scaffolds with spindle‐like and star‐type shape. The results of cell attachment and proliferation on the nanofibrous scaffolds suggested that the cytotoxicity of all samples are grade 1 or grade 0, indicating that the material had sound biosafety as biomaterials. Compared with pure PVA and gelatin scaffolds, the hybrid ones possess improved biocompatibility and controllability. These results indicate that the PVA/gelatin nanofibrous have potential as skin scaffolds or wound dressing. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nanofibrous nonwovens based on dendritic‐linear‐dendritic poly(ethylene glycol) hybrids

Dendritic‐linear‐dendritic (DLD) hybrids are highly functional materials combining the properties of linear and dendritic polymers. Attempts to electrospin DLD polymers composed of hyperbranched dendritic blocks of 2,2‐bis(hydroxymethyl) propionic acid on a linear poly(ethylene glycol) core proved unsuccessful. Nevertheless, when these DLD hybrids were blended with an array of different biodegradable polymers as entanglement enhancers, nanofibrous nonwovens were successfully prepared by electrospinning. The pseudogeneration degree of the DLDs, the nature of the co‐electrospun polymer and the solvent systems used for the preparation of the electrospinning solutions exerted a significant effect on the diameter and morphology of the electrospun fibers. It is worth‐noting that aqueous solutions of the DLD polymers and only 1% (w/v) poly(ethylene oxide) resulted in the production of smoother and thinner nanofibers. Such dendritic nanofibrous scaffolds can be promising materials for biomedical applications due to their biocompatibility, biodegradability, multifunctionality, and advanced structural architecture. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45949.     

Fabrication of a Nanofibrous Scaffold for the In Vitro Culture of Cardiac Progenitor Cells for Myocardial Regeneration

In this study, random Poly (?-caprolactone) (PCL):Poly glycolic acid (PGA) nanofibrous scaffold with various PCL:PGA compositions were fabricated by electrospinning method. The nanofibrous scaffolds were characterized by SEM, contact angle measurement, ATR-FTIR, and tensile measurements. The results showed that with the increase of the concentration of PGA in spinning blend solution, the average diameter of nanofibers, hydrophilicity, and mechanical properties of the nanofibrous scaffolds increased. An in vitro degradation study of PCL:PGA nanofibers were conducted in phosphate-buffered saline, pH 7.2. The experiments confirm that increasing of PGA provides faster degradation rate in blended nanofibers. To assay the biocompatibility and cell behavior on the nanofibrous scaffolds, cell attachment and spreading of cardiac progenitor cells seeded on the scaffolds were studied. The results indicate that among electrospun nanofibrous scaffolds, the most appropriate candidate for myocardial tissue engineering scaffolds is PCL:PGA (65:35).     

静电纺丝SF/PLGA纤维支架用于血管组织工程的研究

将丝素蛋白（SF）和乳酸-羟基乙酸共聚物（PLGA）溶解在六氟异丙醇中配制成溶液,采用静电纺丝技术制备了SF/PLGA纳米纤维支架,使用扫描电子显微镜（SEM）对纤维支架进行表征,研究了聚合物溶液浓度、纺丝电压、接收距离以及体积流率对纳米纤维形态的影响,从而得到纺丝的最适宜工艺参数。考察了纤维支架表面对HUVECs细胞的相容性。结果表明：HUVECs可以在SF/PLGA纤维支架表面很好的黏附和增殖,支架具有良好的细胞相容性,在组织工程领域有良好的应用前景。     

Degradation and Mechanical Behavior of Fish Gelatin/Polycaprolactone AC Electrospun Nanofibrous Meshes

With the increasing interest in biopolymer nanofibers for diverse applications, the characterization of these materials in the physiological environment has become of equal interest and importance. This study performs first-time simulated body fluid (SBF) degradation and tensile mechanical analyses of blended fish gelatin (FGEL) and polycaprolactone (PCL) nanofibrous meshes prepared by a high-throughput free-surface alternating field electrospinning. The thermally crosslinked FGEL/PCL nanofibrous materials with 84–96% porosity and up to 60 wt% PCL fraction demonstrate mass retention up to 88.4% after 14 days in SBF. The trends in the PCL crystallinity and FGEL secondary structure modification during the SBF degradation are analyzed by Fourier transform infrared spectroscopy. Tensile tests of such porous, 0.1–2.2 mm thick FGEL/PCL nanofibrous meshes in SBF reveal the ultimate tensile strength, Young's modulus, and elongation at break within the ranges of 60–105 kPa, 0.3–1.6 MPa, and 20–70%, respectively, depending on the FGEL/PCL mass ratio. The results demonstrate that FGEL/PCL nanofibrous materials prepared from poorly miscible FGEL and PCL can be suitable for selected biomedical applications such as scaffolds for skin, cranial cruciate ligament, articular cartilage, or vascular tissue repair.     

Study on the properties of the electrospun silk fibroin/gelatin blend nanofibers for scaffolds

Silk fibroin (SF)/gelatin blend nanofibers membranes as scaffolds were fabricated successfully via electrospinning with different composition ratios in formic acid. The formation of intermolecular hydrogen bonds and the conformational transition of SF provided scaffolds with excellent mechanical properties. FTIR and DTA analysis showed the SF/gelatin nanofibers had more β‐sheet structures than the pure SF nanofibers. The former's breaking tenacity increased from 0.95 up to 1.60 MPa, strain at break was 7.6%, average fiber diameter was 89.2 nm, porosity was 87%, and pore diameter was 142 nm. MTT, H&E stain, and SEM results showed that the adhesion, spreading, and proliferation of human umbilic vein endothelium cells (HUVECs) and mouse fibroblasts on the SF/gelatin nanofibers scaffolds were definitely better than that on the SF nanofibers scaffolds. The scaffolds could replace the natural ECM proteins, support long‐term cell growth, form three‐dimensional networks of the nanofibrous structure, and grow in the direction of fiber orientation. Our results prove that the addition of gelatin improved the mechanical and biological properties of the pure SF nanofibers, these SF/gelatin blend nanofiber membranes are desirable for the scaffolds and may be a good candidate for blood vessel engineering scaffolds. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Crosslinking of the electrospun gelatin nanofibers

Gelatin (Gt) nanofibers have been prepared by using an electrospinning process in a previous study. In order to improve their water-resistant ability and thermomechnical performance for potential biomedical applications, in this article, the electrospun gelatin nanofibers were crosslinked with saturated glutaraldehyde (GTA) vapor at room temperature. An exposure of this nanofibrous material in the GTA vapor for 3 days generated a crosslinking extent sufficient to preserve the fibrous morphology tested by soaking in 37 °C warm water. On the other hand, the crosslinking also led to improved thermostability and substantial enhancement in mechanical properties. The denaturation temperature corresponding to the helix to coil transition of the air-dried samples increased by about 11 °C and the tensile strength and modulus were nearly 10 times higher than those of the as-electrospun gelatin fibers. Furthermore, cytotoxicity was evaluated based on a cell proliferation study by culturing human dermal fibroblasts (HDFs) on the crosslinked gelatin fibrous scaffolds for 1, 3, 5 and 7 days. It was found cell expansion took place and almost linearly increased during the course of whole period of the cell culture. The initial inhibition of cell expansion on the crosslinked gelatin fibrous substrate suggested some cytotoxic effect of the residual GTA on the cells.     

Biodegradable nanofibrous membrane of zein/silk fibroin by electrospinning

BACKGROUND: Electrospinning of natural polymers offers a promising approach to generate nanofibers with a similar fibrillar structure to that of native extracellular matrix. In the present work, zein/silk fibroin (SF) blends were electrospun with formic acid as solvent to fabricate bicomponent nanofibrous scaffolds for biomedical applications. RESULTS: The zein/SF electrospun nanofibers had a smaller diameter and narrower diameter distribution than pure zein nanofibers, and the average diameter gradually decreased from 265 to 230 nm with increasing SF content in the blend. The predominant presence of α‐helix zein structure and random coil form of silk I in blend fibrous membranes was confirmed from Fourier transform infrared spectral and wide‐angle X‐ray diffraction data, while conversion to the β‐sheet structure of SF was also detected. The tensile strength of the zein/SF fibrous membranes was improved as the content of SF in the blend fibers increased. A preliminary study of in vitro degradation and cytotoxicity evaluated by MTT assay indicated that biodegradable zein/SF fibrous membranes did not induce cytotoxic effects in an L929 mouse fibroblast system. CONCLUSION: Biodegradable zein/SF fibrous membranes with good mechanical properties and cytocompatibility combine the beneficial characteristics of the individual components and may be useful for biomedical applications. Copyright © 2009 Society of Chemical Industry     

Characterization and cell response of electrospun Rana chensinensis skin collagen/poly(l‐lactide) scaffolds with different fiber orientations

Collagen was extracted from Rana chensinensis skin supplied from byproducts via an acid enzymatic extraction method. The R. chensinensis skin collagen (RCSC) and poly(l ‐lactide) (PLLA) were blended at a 3:7 ratio in 1,1,1,3,3,3‐hexafluoroisopropanol (HFIP) at a concentration of 10% (g/mL) and electrospun to produce nanofibers in an aligned and random orientation. For comparison, pure PLLA nanofibrous membranes with aligned and random nanofiber orientations were also produced. The secondary structure of the RCSC nanofibers was investigated by circular dichroism to confirm that the extracted substance was collagen. The presence of collagen in the blend nanofiber was verified by LSCM. The blended nanofibers showed uniform, smooth, and bead‐free morphologies and presented a smaller fiber diameter (278 and and 259 nm) than the pure the ones of PLLA (559 and and 439 nm) nanofibers. It was found that the addition of RCSC and the modification of the nanofiber's orientation affected the fiber's diameter and the crystallization of PLLA. The cell viability studies with human fibroblast cells demonstrated that the RCSC/PLLA nanofibrous membranes formed by electrospinning exhibited good biocompatibility and that the aligned scaffolds could regulate the cell morphology by inducing cell orientation. The empirical results in this study indicated that the aligned RCSC/PLLA nanofibrous membrane is a potential wound dressing candidate for skin regeneration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45109.     

Terpinen-4-ol liposomes-incorporated chitosan/polyethylene oxide electrospun nanofibrous film ameliorates the external microenvironment of healing cutaneous wounds

Chronic wounds are susceptible to infection and difficult to heal due to the complex healing process and terrible microenvironment. In order to overcome this problem, TOLs-CS/PEO nanofibrous film was successfully electrospun. The 6%(v/v) TOLs incorporation into CS/PEO nanofibrous film could improve the morphology and structure of nanofibers, weaken the interactions among macromolecules and rebalance the relationship between hydrophilicity and hydrophobicity of pore surface. Water vapor transmission rate and simulated tissue fluid absorption of films were optimized to reach 2193 g m⁻² d⁻¹ and 1676% so that to obtain the excellent moisture retention. The Young's modulus and elongation at break of films in wet state were 114.69 kPa and 72.04%, respectively, causing the mechanical characteristics similar to human skin. The film could effectively block more than 98% of bacteria and inhibit bacteria growth besides possessing procoagulant property and suitable biodegradability. These findings demonstrate that TOLs-CS/PEO nanofibrous film can construct a microenvironment suitable for wound healing.     

Effect of experimental parameters on the formation of chitosan–poly(acrylic acid) nanofibrous scaffolds and evaluation of their potential application as DNA carrier

Gene delivery from tissue engineering scaffolds has demonstrated the ability to promote gene transfer and stimulate new tissue formation. In this article we report a novel nanofibrous scaffold based on polyelectrolyte complexes as a vehicle for delivery of DNA. When polycation chitosan (CS) was dropped into polyanion poly(acrylic acid) (PAA) suspension and freeze‐dried, CS‐PAA nanofibrous scaffold with diverse microstructure would be formed under different experimental conditions. The nanofiber size was affected by the CS molecular weight, the concentration of CS, the volume ratio of CS to PAA, the reaction temperature, the incubation time, and the final pH of the suspension as well. By using adipic acid as branch promoter, adjusting the pH value of the CS solution to 3, and then dropping CS into the PAA solution at a ratio of 3 : 1, a nanofibrous structure with average diameter 140 nm is obtained after the suspension is freeze‐dried. These nanofibrous scaffolds were nontoxic and can encapsulate plasmid DNA very well. Transgenic expression in human dermal fibroblasts seeded on the nanofibrous scaffolds was significant after 14 days compared to lipofectamine controls. This result indicates that CS‐PAA nanofibrous scaffold have favorable characteristics for nonviral gene delivery to mammalian cell, and have the potential to enhance gene transfer in tissue engineering. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Nanohydroxyapatite-coated hydroxyethyl cellulose/poly (vinyl) alcohol electrospun scaffolds and their cellular response

The present study focused on the preparation of nanohydroxyapatite (nHA)-coated hydroxyethyl cellulose/polyvinyl alcohol (HEC/PVA) nanofibrous scaffolds for bone tissue engineering application. The electrospun HEC/PVA scaffolds were mineralized via alternate soaking process. FESEM revealed that the nHA was formed uniformly over the nanofibers. The nHA mineralization enhanced the tensile strength and reduced the elongation at breakage of scaffolds. The wettability of the nanofibrous scaffolds was significantly improved. The in vitro biocompatibility of scaffolds was evaluated with human osteosarcoma cells. nHA-coated scaffolds had a favorable effect on the proliferation and differentiation of osteosarcoma cell and could be a potential candidate for bone regeneration.     

Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments

A unique blowing-assisted electro-spinning process has been demonstrated recently to fabricate hyaluronic acid (HA) nanofibers. In this article, effects of various experimental parameters, such as air-blowing rate, HA concentration, feeding rate of HA solution, applied electric field, and type of collector on the performance of blowing-assisted electro-spinning of HA solution were investigated. With the assistance of air-blowing, the solution-feeding rate could be increased to 40 μl/min/spinneret and the applied electric field could be decreased to 2.5 kV/cm. The optimum conditions for consistent fabrication of HA (with a molecular weight of ∼3.5 million) nanofibers involved the use of an air-blowing rate of around 70 ft³/h and a concentration range between 2.5 and 2.7% (w/v) in aqueous solution. Two benign methods to fabricate water-resistant HA nanofibrous membranes without the use of reactive chemical agents were demonstrated: (a) the exposure of HA membranes in hydrochloric acid (HCl) vapor, followed by a freezing treatment at −20 °C for 20-40 days; and (b) the immersion of HA membranes in an acidic mixture of ethanol/HCl/H₂O at 4 °C for 1-2 days. Although both methods could produce hydrophilic, substantially water-resistant HA nanofibrous membranes (the treated membranes could keep their shape intact in neutral water at 25 °C for about 1 week), the immersion method (6) was shown to be more versatile and effective. IR spectroscopy was used to investigate this ‘cross-linking’ mechanism in the solid HA membrane. Viscosity studies of acidic HA solutions under varying freezing conditions were also carried out. It was found that when the freezing time exceeded 8 h, the HA solution became gel-like and exhibited a large increase in the hydrogen-bond concentration. Thus, the resistance to water solubility could be due to the high density of hydrogen bonds in the solid HA membranes that were treated by the ‘freezing’ approach.     

Fabrication of PLA/PEG/MWCNT electrospun nanofibrous scaffolds for anticancer drug delivery

In the present study, polylactic acid (PLA)/polyethylene glycol (PEG)/multiwalled carbon nanotube (MWCNT) electrospun nanofibrous scaffolds were prepared via electrospinning process and their applications for the anticancer drug delivery system were investigated. A response surface methodology based on Box–Behnken design (BBD) was used to evaluate the effect of key parameters of electrospinning process including solution concentration, feeding rate, tip–collector distance (TCD) and applied voltage on the morphology of PLA/PEG/MWCNT nanofibrous scaffolds. In optimum conditions (concentration of 8.15%, feeding rate of 0.2 mL/h, voltage of 18.50 kV and TCD of 13.0 cm), the minimum experimental fiber diameter was found to be 225 nm which was in good agreement with the predicted value by the BBD analysis (228 nm). In vitro drug release study of doxorubicin (DOX)‐loaded nanofibrous scaffolds, higher drug content induced an extended release of drug. Also, drug release rate was not dependent on drug/polymer ratio in different electrospun nanofibrous formulations. The equation of M_t = c₀ + kt^0.5was used to describe the kinetic data of DOX release from electrospun nanofibers. The cell viability of DOX‐loaded nanofibrous scaffolds was evaluated using 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide, a tetrazole assay on lung cancer A549 cell lines. We propose that DOX‐incorporated PLA/PEG/MWCNT nanofibrous scaffold could be used as a superior candidate for antitumor drug delivery. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41286.     

Fabrication of Chitosan/Silk Fibroin Composite Nanofibers for Wound-dressing Applications

Chitosan, a naturally occurring polysaccharide with abundant resources, has been extensively exploited for various biomedical applications, typically as wound dressings owing to its unique biocompatibility, good biodegradability and excellent antibacterial properties. In this work, composite nanofibrous membranes of chitosan (CS) and silk fibroin (SF) were successfully fabricated by electrospinning. The morphology of electrospun blend nanofibers was observed by scanning electron microscopy (SEM) and the fiber diameters decreased with the increasing percentage of chitosan. Further, the mechanical test illustrated that the addition of silk fibroin enhanced the mechanical properties of CS/SF nanofibers. The antibacterial activities against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) were evaluated by the turbidity measurement method; and results suggest that the antibacterial effect of composite nanofibers varied on the type of bacteria. Furthermore, the biocompatibility of murine fibroblast on as-prepared nanofibrous membranes was investigated by hematoxylin and eosin (H&E) staining and MTT assays in vitro, and the membranes were found to promote the cell attachment and proliferation. These results suggest that as-prepared chitosan/silk fibroin (CS/SF) composite nanofibrous membranes could be a promising candidate for wound healing applications.     

Electrospun poly(D,L‐lactide) and polyaniline scaffold characterization

Neuromuscular disease or peripheral nerve damage can interrupt muscle contraction, but tissue engineered constructs can be created to combat this problem. Electrospinning provides a way to create a degradable nonwoven mesh that can be used to culture cells and tissues. Conductive polymers can be blended with other polymers to provide an electrical current to increase cell attachment, proliferation, and migration. We electrospun several polyaniline and poly(D ,L ‐lactide) (PANi/PDLA) mixtures at different weight percents including the following PANi‐PDLA solutions (w/v): 24% (83% PDLA/17% PANi), 24% (80% PDLA/20% PANi), 22% (75%PDLA/25% PANi), 29% (83% PDLA/17% PANi), and 29% (80% PDLA/20% PANi). Only the 75/25 electrospun scaffold was able to conduct a current of 5 mA. The calculated electrical conductivity for this scaffold was 0.0437 S/cm. Primary rat muscle cells were cultured on all three of the scaffolds and on tissue culture polystyrene as a positive control. Although the scaffolds degraded during this process, cells were still able to attach and proliferate on each of the different scaffolds. The cellular proliferation measurements showed no significant difference between the four groups measured. The conductivity and cellular behavior demonstrate the feasibility of fabricating a biocompatible, biodegradable, and electrically conductive PDLA/PANi scaffold. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010