The performance of EWMA median and CUSUM median control charts for a normal process with measurement errors

Measurement error is often occurred in statistical process control. The effect of a linearly covariate error model on the exponentially weighted moving average (EWMA) median and cumulative sum (CUSUM) median charts is investigated. The results indicate that the EWMA median and CUSUM median charts are significantly affected in the presence of measurement errors. We compared the performance of the EWMA median and CUSUM median charts by using Markov chain method in the average run length and the standard deviation of the run length. We concluded that the CUSUM median chart for small shifts and the EWMA median chart for larger shifts are recommended. Two examples are provided to illustrate the application of the EWMA and CUSUM median charts with measurement errors.     

The extended homogeneously weighted moving average control chart

Control charts are widely applied in many manufacturing processes to monitor the quality characteristic of interest. Recently, a homogeneously weighted moving average (HWMA) control chart was proposed as an improvement of the exponentially weighted moving average (EWMA) chart for efficiently monitoring of small shifts in the process mean. In the present article, we extend the HWMA chart by imitating exactly the double EWMA (DEWMA) technique. The proposed scheme is regarded as double HWMA (DHWMA) control chart. The run-length characteristics of the proposed chart are evaluated by performing Monte Carlo simulations. A comparison study versus the EWMA, DEWMA, HWMA, mixed EWMA cumulative sum (CUSUM), CUSUM, and GWMA charts indicates that the DHWMA chart is more effective in detecting small to moderate shifts, while it performs similarly with its competitors for large shifts. We also study the robustness of the proposed chart under several nonnormal distributions, and it is shown that the DHWMA chart is in-control robust for small values of the smoothing parameters. Finally, two examples are given to demonstrate the implementation of the proposed chart.     

New GWMA‐CUSUM control chart for monitoring the process dispersion

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts have been widely accepted because of their fantastic speed in identifying small‐to‐moderate unusual variations in the process parameter(s). Recently, a new CUSUM chart has been proposed that uses the EWMA statistic, called the CS‐EWMA chart, for monitoring the process variability. On similar lines, in order to further improve the detection ability of the CS‐EWMA chart, we propose a CUSUM chart using the generally weighted moving average (GWMA) statistic, named the GWMA‐CUSUM chart, for monitoring the process dispersion. Monte Carlo simulations are used to compute the run length profiles of the GWMA‐CUSUM chart. On the basis of the run length comparisons, it turns out that the GWMA‐CUSUM chart outperforms the CUSUM and CS‐EWMA charts when identifying small variations in the process variability. A simulated dataset is also used to explain the working and implementation of the CS‐EWMA and GWMA‐CUSUM charts.     

New control charts for monitoring the Weibull percentiles under complete data and Type‐II censoring

In this paper, we propose 3 new control charts for monitoring the lower Weibull percentiles under complete data and Type‐II censoring. In transforming the Weibull distribution to the smallest extreme value distribution, Pascaul et al (2017) presented an exponentially weighted moving average (EWMA) control chart, hereafter referred to as EWMA‐SEV‐Q, based on a pivotal quantity conditioned on ancillary statistics. We extended their concept to construct a cumulative sum (CUSUM) control chart denoted by CUSUM‐SEV‐Q. We provide more insights of the statistical properties of the monitoring statistic. Additionally, in transforming a Weibull distribution to a standard normal distribution, we propose EWMA and CUSUM control charts, denoted as EWMA‐YP and CUSUM‐YP, respectively, based on a pivotal quantity for monitoring the Weibull percentiles with complete data. With complete data, the EWMA‐YP and CUSUM‐YP control charts perform better than the EWMA‐SEV‐Q and CUSUM‐SEV‐Q control charts in terms of average run length. In Type‐II censoring, the EWMA‐SEV‐Q chart is slightly better than the CUSUM‐SEV‐Q chart in terms of average run length. Two numerical examples are used to illustrate the applications of the proposed control charts.     

On developing an exponentially weighted moving average chart under progressive setup: An efficient approach to manufacturing processes

The exponentially weighted moving average (EWMA) control chart is a memory chart that is widely used in process monitoring to spot small and persistent disturbances in the process parameter(s). This chart requires normality of the quality characteristic(s) of interest and a smaller choice of smoothing parameter. Any deviations from these conditions affect its performance in terms of efficiency and robustness. For the said two concerns, this study develops a new mixed EWMA chart under progressive setup (mixed EWMA–progressive mean [MEP] chart). The proposed MEP chart combines the advantages of robustness (under nonnormal scenarios) and high sensitivity to small and persistent shifts in the process mean. The performance of the proposed MEP control chart is evaluated in terms of average run length and some other characteristics of run length distribution. The assessment of the proposed chart is made under standard normal, student's t, gamma, Laplace, logistic, exponential, contaminated normal and lognormal distributions. The performance of the proposed MEP chart is also compared with some existing competitors including the classical EWMA, the classical cumulative sum (CUSUM), the homogenously weighted moving average, the mixed EWMA–CUSUM, the mixed CUSUM–EWMA and the double EWMA charts. The analysis reveals that the proposal of this study offers a superior design structure relative to its competing counterparts. An application from substrates manufacturing process (in which flow width of the resist is the key quality characteristic) is also provided in the study.     

Progressive Mean Control Chart for Monitoring Process Location Parameter

Control charts are widely used for process monitoring. They show whether the variation is due to common causes or whether some of the variation is due to special causes. To detect large shifts in the process, Shewhart‐type control charts are preferred. Cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are generally used to detect small and moderate shifts. Shewhart‐type control charts (without additional tests) use only current information to detect special causes, whereas CUSUM and EWMA control charts also use past information. In this article, we proposed a control chart called progressive mean (PM) control chart, in which a PM is used as a plotting statistic. The proposed chart is designed such that it uses not only the current information but also the past information. Therefore, the proposed chart is a natural competitor for the classical CUSUM, the classical EWMA and some recent modifications of these two charts. The conclusion of this article is that the performance of the proposed PM chart is superior to the compared ones for small and moderate shifts, and its performance for large shifts is better (in terms of the average run length). Copyright © 2012 John Wiley & Sons, Ltd.     

Enhancing the performance of EWMA charts

Control charts are extensively used in processes and are very helpful in determining the special cause variations so that a timely action may be taken to eliminate them. One of the charting procedures is the Shewhart‐type control charts, which are used mainly to detect large shifts. Two alternatives to the Shewhart‐type control charts are the cumulative (CUSUM) control charts and the exponentially weighted moving average (EWMA) control charts that are specially designed to detect small and moderately sustained changes in quality. Enhancing the ability of design structures of control charts is always desirable and one may do it in different ways. In this article, we propose two runs rules schemes to be applied on EWMA control charts and evaluate their performance in terms of the Average Run Length (ARL). Comparisons of the proposed schemes are made with some existing representative CUSUM and EWMA‐type counterparts used for small and moderate shifts, including the classical EWMA, the classical CUSUM, the fast initial response CUSUM and EWMA, the weighted CUSUM, the double CUSUM, the distribution‐free CUSUM and the runs rules schemes‐based CUSUM. The findings of the study reveal that the proposed schemes are able to perform better than all the other schemes under investigation. Copyright © 2010 John Wiley & Sons, Ltd.     

New Synthetic CUSUM and Synthetic EWMA Control Charts for Monitoring the Process Mean using Auxiliary Information

The cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are potentially powerful process monitoring tool because of their excellent speed in detecting small to moderate shifts in the process parameters. These control charts can be further improved by integrating them with the conforming run length control chart, resulting in the synthetic CUSUM (SynCUSUM) and synthetic EWMA (SynEWMA) charts. In this paper, we enhance the detection abilities of the SynCUSUM and SynEWMA charts using the auxiliary information. With suitable assumptions, the proposed control charts encompass the existing SynCUSUM, SynEWMA, CUSUM, and EWMA charts. Extensive Monte Carlo simulations are used to study the run length profiles of the proposed control charts. It turns out that the proposed near‐optimal control charts with the auxiliary information perform uniformly and substantially better than the existing near‐optimal SynCUSUM, SynEWMA, CUSUM, and EWMA charts. The proposed and existing control charts are also illustrated with the help of an example. Copyright © 2017 John Wiley & Sons, Ltd.     

An enhanced approach for the progressive mean control charts

To maintain and improve the quality of the processes, control charts play an important role for reduction of variation. To detect large shifts in the process parameters, Shewhart control charts are commonly applied but for small shifts, exponentially weighted moving averages (EWMA), cumulative sum (CUSUM), double exponentially weighted moving average (DEWMA), double CUSUM, moving average (MA), double moving average (DMA), and progressive mean (PM) control charts, are used. This study proposes double progressive mean (DPM) and optimal DPM control charts to enhance the performance of the PM chart. As the proposed DPM control charts use information sequentially, hence their performance is compared with natural competitors EWMA, CUSUM, DEWMA, double CUSUM, MA, DMA, and PM control charts. Run length and its different properties are evaluated to compare the performance of the proposed charts and counterparts. Results reveal that proposed optimal DPM outperforms the other charts. An example related to voltage on fixed capacitance level is also provided to illustrate the proposed charts.     

An Efficient Shewhart‐Type Control Chart to Monitor Moderate Size Shifts in the Process Mean in Phase II

According to Shewhart, control charts are not very sensitive to small and moderate size process shifts that is why those are less likely to be effective in Phase II. So to monitor small or moderate size process shifts in Phase II, cumulative sum (CUSUM) and exponentially weighted moving average (EWMA) control charts are considered as alternate of Shewhart control charts. In this paper, a Shewhart‐type control chart is proposed by using difference‐in‐difference estimator in order to detect moderate size shifts in process mean in Phase II. The performance of the proposed control chart is studied for known and unknown cases separately through a detailed simulation study. For the unknown case, instead of using reference samples of small sizes, large size reference sample(s) is used as we can see in some of nonparametric control chart articles. In an illustrative example, the proposed control charts are constructed for both known and unknown cases along with Shewhart ‐chart, classical EWMA, and CUSUM control charts. In this application, the proposed chart is found comprehensively better than not only Shewhart ‐chart but also EWMA and CUSUM control charts. By comparing average run length, the proposed control chart is found always better than Shewhart ‐chart and in general better than classical EWMA and CUSUM control charts when we have relatively higher values of correlation coefficients and detection of the moderate shifts in the process mean is concerned. Copyright © 2015 John Wiley & Sons, Ltd.     

A new adaptive EWMA control chart for monitoring the process dispersion

The exponentially weighted moving average (EWMA), cumulative sum (CUSUM), and adaptive EWMA (AEWMA) control charts have had wide popularity because of their excellent speed in tracking infrequent process shifts, which are expected to lie within certain ranges. In this paper, we propose a new AEWMA dispersion chart that may achieve better performance over a range of dispersion shifts. The idea is to first consider an unbiased estimator of the dispersion shift using the EWMA statistic, and then based on the magnitude of this shift, select an appropriate value of the smoothing parameter to design an EWMA chart, named the AEWMA chart. The run length characteristics of the AEWMA chart are computed with the help of extensive Monte Carlo simulations. The AEWMA chart is compared with some of the existing powerful competitor control charts. It turns out that the AEWMA chart performs substantially and uniformly better than the EWMA‐S², CUSUM‐S², existing AEWMA, and HHW‐EWMA charts when detecting different kinds of shifts in the process dispersion. Moreover, an example is also used to explain the working and implementation of the proposed AEWMA chart.     

Improving the Performance of Exponentially Weighted Moving Average Control Charts

A control chart is a graphical tool used for monitoring a production process and quality improvement. One such charting procedure is the Shewhart‐type control chart, which is sensitive mainly to the large shifts. For small shifts, the cumulative sum (CUSUM) control charts and exponentially weighted moving average (EWMA) control charts were proposed. To further enhance the ability of the EWMA control chart to quickly detect wide range process changes, we have developed an EWMA control chart using the median ranked set sampling (RSS), median double RSS and the double median RSS. The findings show that the proposed median‐ranked sampling procedures substantially increase the sensitivities of EWMA control charts. The newly developed control charts dominate most of their existing counterparts, in terms of the run‐length properties, the Average Extra Quadratic Loss and the Performance Comparison Index. These include the classical EWMA, fast initial response EWMA, double and triple EWMA, runs‐rules EWMA, the max EWMA with mean‐squared deviation, the mixed EWMA‐CUSUM, the hybrid EWMA and the combined Shewhart–EWMA based on ranks. An application of the proposed schemes on real data sets is also given to illustrate the implementation and procedural details of the proposed methodology. Copyright © 2013 John Wiley & Sons, Ltd.     

New Synthetic EWMA and Synthetic CUSUM Control Charts for Monitoring the Process Mean

Exponentially weighted moving average (EWMA) and cumulative sum (CUSUM) control charts are potentially powerful statistical process monitoring tools because of their excellent speed in detecting small to moderate persistent process shifts. Recently, synthetic EWMA (SynEWMA) and synthetic CUSUM (SynCUSUM) control charts have been proposed based on simple random sampling (SRS) by integrating the EWMA and CUSUM control charts with the conforming run length control chart, respectively. These synthetic control charts provide overall superior detection over a range of mean shift sizes. In this article, we propose new SynEWMA and SynCUSUM control charts based on ranked set sampling (RSS) and median RSS (MRSS) schemes, named SynEWMA‐RSS and SynEWMA‐MRSS charts, respectively, for monitoring the process mean. Extensive Monte Carlo simulations are used to estimate the run length characteristics of the proposed control charts. The run length performances of these control charts are compared with their existing powerful counterparts based on SRS, RSS and MRSS schemes. It turns out that the proposed charts perform uniformly better than the Shewhart, optimal synthetic, optimal EWMA, optimal CUSUM, near‐optimal SynEWMA, near‐optimal SynCUSUM control charts based on SRS, and combined Shewhart‐EWMA control charts based on RSS and MRSS schemes. A similar trend is observed when constructing the proposed control charts based on imperfect RSS schemes. An application to a real data is also provided to demonstrate the implementations of the proposed SynEWMA and SynCUSUM control charts. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced generally weighted moving average variance charts for monitoring process variance with individual observations

The generally weighted moving average variance (GWMAV) chart is effective in detecting increases in process variance when only individual observations are available. Recently, the combination of exponentially weighted moving average and cumulative sum (CUSUM) charts for the effective detection of small process shifts has emerged. Inspired by the features, we propose the mixed GWMAV-CUSUM chart and its reverse order CUSUM-GWMAV to enhance the detection ability of the GWMAV chart and compare with the existing counterparts. Numerical simulation revealed that the mixed GWMAV-CUSUM and mixed CUSUM-GWMAV charts are sensitive to small upward shifts in the process variance and efficient structures compared with their prototypes and their separate charts, that is, GWMAV and CUSUM charts. An industrial dataset was used to illustrate the application of the proposed mixed charts.     

Mixed Cumulative Sum–Exponentially Weighted Moving Average Control Charts: An Efficient Way of Monitoring Process Location

Shewhart, exponentially weighted moving average (EWMA), and cumulative sum (CUSUM) charts are famous statistical tools, to handle special causes and to bring the process back in statistical control. Shewhart charts are useful to detect large shifts, whereas EWMA and CUSUM are more sensitive for small to moderate shifts. In this study, we propose a new control chart, named mixed CUSUM‐EWMA chart, which is used to monitor the location of a process. The performance of the proposed mixed CUSUM‐EWMA control chart is measured through the average run length, extra quadratic loss, relative average run length, and a performance comparison index study. Comparisons are made with some existing charts from the literature. An example with real data is also given for practical considerations. Copyright © 2014 John Wiley & Sons, Ltd.     

Distribution‐free mixed cumulative sum‐exponentially weighted moving average control charts for detecting mean shifts

In this paper, we propose distribution‐free mixed cumulative sum‐exponentially weighted moving average (CUSUM‐EWMA) and exponentially weighted moving average‐cumulative sum (EWMA‐CUSUM) control charts based on the Wilcoxon rank‐sum test for detecting process mean shifts without any distributional assumption of the underlying quality process. The performances of the proposed charts are measured through the average run‐length, relative mean index, average extra quadratic loss, and average ratio of the average run‐length and performance comparison index. It is found that the proposed charts perform better than its counterparts considered in this paper under non‐normal distributions and outperform the classical mixed CUSUM‐EWMA and EWMA‐CUSUM charts in many cases under the normal distribution. The effect of the phase I sample size is also investigated on the phase II performance of the proposed charts. A numerical illustration is given to demonstrate the implementation and simplicity of the proposed charts.     

Distribution-free triple EWMA control chart for monitoring the process location using the Wilcoxon rank-sum statistic with fast initial response feature

The exponentially weighted moving average (EWMA) control chart is a memory-type chart known to be more efficient in detecting small and moderate shifts in the process parameter. The double EWMA (DEWMA) chart is an extension of the EWMA chart that is more effective than the latter in the detection of small-to-moderate shifts. This paper proposes a new distribution-free (or nonparametric) triple EWMA (TEWMA) control chart based on the Wilcoxon rank-sum (W) statistic to improve the detection ability in the process location parameter. Moreover, a new fast initial response (FIR) feature is added to further improve the sensitivity of the new TEWMA chart. The performance of the proposed TEWMA chart with and without FIR features is compared to those of the existing EWMA and DEWMA W charts. It is observed that the TEWMA chart with and without FIR features is superior to the competing charts in most situations. A real-life illustration is provided to show the application and implementation of the new chart.     

Mixed Exponentially Weighted Moving Average–Cumulative Sum Charts for Process Monitoring

The control chart is a very popular tool of statistical process control. It is used to determine the existence of special cause variation to remove it so that the process may be brought in statistical control. Shewhart‐type control charts are sensitive for large disturbances in the process, whereas cumulative sum (CUSUM)–type and exponentially weighted moving average (EWMA)–type control charts are intended to spot small and moderate disturbances. In this article, we proposed a mixed EWMA–CUSUM control chart for detecting a shift in the process mean and evaluated its average run lengths. Comparisons of the proposed control chart were made with some representative control charts including the classical CUSUM, classical EWMA, fast initial response CUSUM, fast initial response EWMA, adaptive CUSUM with EWMA‐based shift estimator, weighted CUSUM and runs rules–based CUSUM and EWMA. The comparisons revealed that mixing the two charts makes the proposed scheme even more sensitive to the small shifts in the process mean than the other schemes designed for detecting small shifts. Copyright © 2012 John Wiley & Sons, Ltd.     

New memory‐type dispersion control charts

The exponentially weighted moving average (EWMA) control chart is a memory‐type process monitoring tool that is frequently used to monitor small and moderate disturbances in the process mean and/or process dispersion. In this study, we propose 2 new memory‐type control charts for monitoring changes in the process dispersion, namely, the generally weighted moving average and the hybrid EWMA charts. We use Monte Carlo simulations to compute the run length profiles of the proposed control charts. The run length comparisons of the proposed and existing charts reveal that the generally weighted moving average and hybrid EWMA charts provide better protection than the existing EWMA chart when detecting small to moderate shifts in the process dispersion. An illustrative dataset is also used to show the superiority of the proposed charts over the existing chart.     

A New Synthetic Exponentially Weighted Moving Average Control Chart for Monitoring Process Dispersion

Exponentially weighted moving average (EWMA) control charts have been widely recognized as a potentially powerful process monitoring tool of the statistical process control because of their excellent speed in detecting small to moderate shifts in the process parameters. Recently, new EWMA and synthetic control charts have been proposed based on the best linear unbiased estimator of the scale parameter using ordered ranked set sampling (ORSS) scheme, named EWMA‐ORSS and synthetic‐ORSS charts, respectively. In this paper, we extend the work and propose a new synthetic EWMA (SynEWMA) control chart for monitoring the process dispersion using ORSS, named SynEWMA‐ORSS chart. The SynEWMA‐ORSS chart is an integration of the EWMA‐ORSS chart and the conforming run length chart. Extensive Monte Carlo simulations are used to estimate the run length performances of the proposed control chart. A comprehensive comparison of the run length performances of the proposed and the existing powerful control charts reveals that the SynEWMA‐ORSS chart outperforms the synthetic‐R, synthetic‐S, synthetic‐D, synthetic‐ORSS, CUSUM‐R, CUSUM‐S, CUSUM‐ln S², EWMA‐ln S² and EWMA‐ORSS charts when detecting small shifts in the process dispersion. A similar trend is observed when the proposed control chart is constructed under imperfect rankings. An application to a real data is also provided to demonstrate the implementation and application of the proposed control chart. Copyright © 2014 John Wiley & Sons, Ltd.