Preparation of novel soluble poly(ester imide)s containing a trimellitimide moiety and their use as modifiers for aromatic diamine‐cured epoxy resin

Poly(ester imide)s, prepared by the reaction of phthalic anhydride, N‐(4‐carboxyphenyl) trimellitimide and 1,2‐ethanediol, were used to improve the toughness of bisphenol‐A diglycidyl ether epoxy resin cured with 4,4′‐diaminodiphenyl sulfone (DDS). The poly(ester imide)s include poly(ethylene phthalate‐co‐ethylene N‐(1,4‐phenylene) trimellitimide dicarboxylate)s (PESIs) having 10, 20 and 30 mol% trimellitimide (TI) units, respectively. PESIs having 10 and 20 mol% TI units were effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt% of PESI (20 mol% TI unit, M _W 19300 g mol^?1) led to a 55% increase in the fracture toughness (K_IC) of the cured resin (with an increase in flexural strength and modulus) and the modified resin had a particulate morphology. PESI having 30 mol% TI units was not effective because of degradation of the modifier by DDS. The toughening mechanism is discussed in terms of morphological and dynamic viscoelastic behaviour of the modified epoxy resin system. © 2001 Society of Chemical Industry     

Modification of bismaleimide resin by poly(ethylene phthalate‐co‐ethylene terephthalate), poly(ethylene phthalate‐co‐ethylene 4,4′‐biphenyl dicarboxylate), and poly(ethylene phthalate‐co‐ethylene 2,6‐naphthalene dicarboxylate)

Aromatic polyesters were prepared and used to improve the brittleness of bismaleimide resin, composed of 4,4′‐bismaleimidodiphenyl methane and o,o′‐diallyl bisphenol A (Matrimid 5292 A/B resin). The aromatic polyesters included PEPT [poly(ethylene phthalate‐co‐ethylene terephthalate)], with 50 mol % of terephthalate, PEPB [poly(ethylene phthalate‐co‐ethylene 4,4′‐biphenyl dicarboxylate)], with 50 mol % of 4,4′‐biphenyl dicarboxylate, and PEPN [poly(ethylene phthalate‐co‐ethylene 2,6‐naphthalene dicarboxylate)], with 50 mol % 2,6‐naphthalene dicarboxylate unit. The polyesters were effective modifiers for improving the brittleness of the bismaleimide resin. For example, inclusion of 15 wt % PEPT (MW = 9300) led to a 75% increase in fracture toughness, with retention in flexural properties and a slight loss of the glass‐transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Microstructures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The toughening mechanism was assessed as it related to the morphological and dynamic viscoelastic behaviors of the modified bismaleimide resin system. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2352–2367, 2001     

Modification of cyanate ester resin by soluble polyarylates

Soluble polyarylates were prepared from the reaction of 2,2‐bis(4‐hydroxyphenyl)propane (bisphenol‐A) and aromatic acid dichlorides (phthaloyl chloride and related diacid dichlorides), and used to improve the brittleness of a cyanate ester resin. The polyarylates include poly[2,2‐di(4‐phenylene)propane phthalate] (PPA), poly[2,2‐di(4‐phenylene)propane phthalate‐co‐2,2‐di(4‐phenylene)propane isophthalate] (IPPA) and poly[2,2‐di(4‐phenylene)propane phthalate‐co‐2,2‐di(4‐phenylene)propane terephthalate] (TPPA). Furthermore, a commercial polyarylate, U‐polymer, was also used as a modifier. The morphologies of the modified resins depended on the polyarylate structure and concentration. The most effective modification of the cyanate ester resin could be attained because of the co‐continuous phase structure of the modified resin: 25 wt% inclusion of IPPA (50 mol% isophthalate units, weight average molecular weight (M_w) 38 500 g mol^?1) led to a 130% increase in the fracture toughness (K_IC) for the modified resin, with retention of its flexural properties and glass transition temperature, as compared with the values for the unmodified resin. Water absorptivity of the IPPA‐modified resin was smaller than that of the unmodified resin. Copyright © 2003 Society of Chemical Industry     

Modification of bismaleimide resin by poly(propylene phthalate), poly(butylene phthalate) and related (co)polyesters

Aromatic polyesters were prepared and used to decrease the brittleness of the bismaleimide resin composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA) (Matrimid 5292 resin). The aromatic polyesters included poly(propylene phthalate) (PPP), poly(2,2-dimethylpropylene phthalate) (PDPP), poly(butylene phthalate) (PBP) and poly(butylene phthalate-co-butylene terephthalate) (50mol% terephthalate unit) (PBPT). The polyesters were effective modifiers for decreasing the brittleness of the bismaleimide resin. For example, inclusion of 20wt% PPP (MW 18700) led to 50% increase in the fracture toughness (K_IC) with retention of flexural properties and a slight loss of the glass transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin. Micro-structures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was slightly lower than that of the unmodified resin as determined by thermogravimetric analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviour of the modified bismaleimide resin system. © 1998 SCI.     

Modification of cyanate ester resin by poly(ethylene phthalate) and related copolyesters

Aromatic polyesters were prepared and used to improve the brittleness of the cyanate ester resin. The aromatic polyesters include poly(ethylene phthalate) (PEP) and poly(ethylene phthalate‐co‐1,4‐phenylene phthalate). The polyesters were effective modifiers for improving the brittleness of the cyanate ester resin. For example, inclusion of 20 wt % PEP (MW 19,800) led to a 120% increase in the fracture toughness (K_IC) with retention in flexural properties and a slight loss of the glass transition temperature compared to the mechanical and thermal properties of the unmodified cured cyanate ester resin. The microstructures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resins was lower than that of the unmodified resin as determined by thermogravimetric analysis. The water absorptivity of the modified resin increased significantly, compared to that of the unmodified cured cyanate ester resin. The toughening mechanism was discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified cyanate ester resin system. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 208–219, 2000     

Modification of three‐component bismaleimide resin by poly(phthaloyl diphenyl ether) and related copolymers

A three‐component bismaleimide resin, composed of 4,4′‐bismaleimidodiphenyl methane (BDM), o,o′‐diallyl bisphenol A (DBA), and o,o′‐dimethallyl bisphenol A (1.0/0.3/0.7 eq ratio) was used as a parent bismaleimide resin. Modification of the three‐component bismaleimide resin was examined by blending it with poly(ether ketone ketone)s. Poly(ether ketone ketone)s include poly(phthaloyl diphenyl ether) (PPDE), poly(phthaloyl diphenyl ether‐co‐isophthaloyl diphenyl ether) (PPIDE), and poly(phthaloyl diphenyl ether‐co‐terephthaloyl diphenyl ether) (PPTDE). The PPIDE (51 mol % isophthaloyl) and PPTDE (44 mol % terephthaloyl) were more effective as modifiers for the bismaleimide resin than was PPDE. For example, the fracture toughness (K_IC) for the modified resin increased 30% with no deterioration in the flexural strength and modulus with a 15 wt % inclusion of PPTDE (MW 23,400) compared to the parent three‐component bismaleimide resin: the K_IC increased 95% compared to the value for the Matrimid 5292 resin composed of BDM and DBA. The morphologies of the modified resins changed from particulate to cocontinuous phase structures, depending on the modifier structure and concentration. Toughening of the cured bismaleimide resin could be achieved because of the cocontinuous phase structure. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2991–3000, 2001     

Toughening of bismaleimide resin by modification with poly(ethylene phthalate) and poly(ethylene phthalate-co-ethylene isophthalate)

Aromatic polyesters were prepared and used to improve the brittleness of the bismaleimide resin composed of 4,4′-bismaleimidediphenyl methane and o,o′-diallyl bisphenol A. The aromatic polyesters contain poly(ethylene phthalate) (PEP) and poly(ethylene phthalate-co-ethylene isophthalate) (10 mol % isophthalate unit) (PEPI). PEP and PEPI were effective modifiers for improving the brittleness of the bismaleimide resin. The most suitable composition for the modification of the bismaleimide was inclusion of 20 wt % PEP (MW 18,200), which led to an 80% increase in the fracture toughness with retention of flexural properties and a slight decrease in the glass transition temperature, compared with the mechanical and thermal properties of the unmodified cured bismaleimide resin (Matrimid resin). Microstructures of the modified resins were examined by scanning electron microscopy and dynamic viscoelastic analysis. The thermal stability of the modified resin was slightly lower than that of the unmodified resin by thermogravimetric analysis. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behavior of the modified bismaleimide resin system. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 1349–1357, 1997     

Modification of bismaleimide resin by poly(phthaloyl diphenyl ether) and the related copolymers

Poly(ether ketone ketone)s were prepared and used to improve the brittleness of the bismaleimide resin. The bismaleimide resin was composed of 4,4′-bismaleimidediphenyl methane (BMI) and o,o′-diallyl bisphenol A (DBA). Poly(ether ketone ketone)s include poly(phthaloyl diphenyl ether) (PPDE), poly(phthaloyl diphenyl ether-co-isophthaloyl diphenyl ether) (PPIDE), and poly(phthaloyl diphenyl ether-co-terephthaloyl diphenyl ether) (PPTDE). PPIDE (50 mol % isophthaloyl unit) was more effective as a modifier for the bismaleimide resin than were PPDE and PPTDE (50 mol % terephthaloyl unit). Morphologies of the modified resins changed from particulate to cocontinuous and to phase-inverted structures, depending on the modifier structure and content. The most effective modification for the cured resins could be attained because of the cocontinuous phase or phase-inverted structure of the modified resins. For example, when using 10 wt % of PPIDE (50 mol % IP unit, MW 349,000), the modified resin had a phase-inverted morphology and the fracture toughness (K_IC) for the modified resins increased 75% with retention in flexural properties and the glass transition temperature, compared to those of the unmodified cured bismaleimide resin. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:769–780, 1998     

Toughening of aromatic diamine-cured epoxy resins by poly(butylene phthalate)s and the related copolyesters

Aromatic polyesters, prepared by the reaction of aromatic dicarboxylic acids and 1,4-butanediol, were used to improve the toughness of bisphenol-A diglycidyl ether epoxy resin cured with p,p′-diaminodiphenyl sulfone. These polyesters contained poly(butylene phthalate)s (PBP), poly(butylene phthalate-co-butylene isophthalate)s, poly(butylene phthalate-co-butylene terephthalate)s, and poly(butylene phthalate-co-butylene 2,6-naphthalene dicarboxylate)s. All aromatic polyesters used in this study were soluble in the epoxy resin without solvents and were found to be effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PBP (MW 16,300) led to a 120% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism was discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 1996 John Wiley & Sons, Inc.     

Effects of thermal imidization on mechanical properties of poly(amide‐co‐imide)/multiwalled carbon nanotube composite films

In this study, experimental and numerical studies were performed to investigate the relationship among the functionalization method, weight fraction of MWCNTs, thermal imidization cycle, and mechanical properties of various PAI/MWCNT composite films. Poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were prepared by solution mixing and film casting. The effects of chemical functionalization and weight fraction of multiwalled carbon nanotubes on thermal imidization and mechanical properties were investigated through experimental and numerical studies. The time needed to achieve sufficient thermal imidization was reduced with increasing multiwalled carbon nanotube content when compared with that of a pure poly(amide‐co‐imide) film because multiwalled carbon nanotubes have a higher thermal conductivity than pure poly(amide‐co‐imide) resin. Mechanical properties of pure poly(amide‐co‐imide) and poly(amide‐co‐imide)/multiwalled carbon nanotube composite films were increased with increasing imidization time and were improved significantly in the case of the composite film filled with hydrogen peroxide treated multiwalled carbon nanotubes. Both the tensile strength and strain to failure of the multiwalled carbon nanotube filled poly(amide‐co‐imide) film were increased substantially because multiwalled carbon nanotube dispersion was improved and covalent bonding was formed between multiwalled carbon nanotubes and poly(amide‐co‐imide) molecules. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of new aromatic poly(ester‐imide)s derived from 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl) pyridine and various dihydroxy compounds

A novel class of wholly aromatic poly(ester‐imide)s, having a biphenylene pendant group, with inherent viscosities of 0.32–0.49 dL g^?1 was prepared by the diphenylchlorophosphate‐activated direct polyesterification of the preformed imide‐ring‐containing diacid, 4‐p‐biphenyl‐2,6‐bis(4‐trimellitimidophenyl)pyridine (1) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A reference diacid, 2,6‐bis(trimellitimido)pyridine (2) without a biphenylene pendant group and two phenylene rings in the backbone, was also synthesized for comparison purposes. At first, with due attention to structural similarity and to compare the characterization data, a model compound (3) was synthesized by the reaction of compound 1 with two mole equivalents of phenol. Moreover, the optimum condition of polymerization reactions was obtained via a study of the model compound synthesis. All of the resulting polymers were characterized by Fourier transform infrared and ¹H NMR spectroscopy and elemental analysis. The ultraviolet λ_max values of the poly(ester‐imide)s were also determined. All of the resulting polymers exhibited excellent solubility in common organic solvents, such as pyridine, chloroform, tetrahydrofuran, and m‐cresol, as well as in polar organic solvents, such as N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide. The crystalline nature of the polymers obtained was evaluated by means of wide‐angle X‐ray diffraction. The resulting poly(ester‐imide)s showed nearly an amorphous nature, except poly(ester‐imide) derived from 4,4′‐dihydroxy biphenyl. The glass transition temperatures (T_g) of the polymers determined by differential scanning calorimetry thermograms were in the range 298–342 °C. The 10% weight loss temperatures (T_10%) from thermogravimetric analysis curves were found to be in the range 433–471 °C in nitrogen. Films of the polymers were also prepared by casting the solutions. Copyright © 2006 Society of Chemical Industry     

Electroluminescence and photovoltaic properties of poly(p‐phenylene vinylene) derivatives with dendritic pendants

A copolymer of dendronized poly(p‐phenylene vinylene) (PPV), poly{2‐[3′,5′‐bis (2′‐ethylhexyloxy) bnenzyloxy]‐1,4‐phenylene vinylene}‐co‐poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene] (BE‐co‐MEH–PPV), was synthesized with the Gilch route to improve the electroluminescence and photovoltaic properties of the dendronized PPV homopolymer. The polymer was characterized by ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, and electrochemical cyclic voltammetry and compared with the homopolymers poly{2‐[3′, 5′‐bis(2‐ethylhexyloxy) benzyloxy‐1,4‐phenylene vinylene} (BE–PPV) and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH–PPV). Polymer light‐emitting diodes based on the polymers with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/polymer/Ca/Al were fabricated. The electroluminescence efficiency of BE‐co‐MEH–PPV reached 1.64 cd/A, which was much higher than that of BE–PPV (0.68 cd/A) and a little higher than that of MEH–PPV (1.59 cd/A). Photovoltaic properties of the polymer were studied with the device configuration of ITO/PEDOT : PSS/polymer : [6,6J‐phenyl‐C₆₁‐butyric acid methyl ester] (PCBM)/Mg/Al. The power conversion efficiency of the device based on the blend of BE‐co‐MEH–PPV and PCBM with a weight ratio of 1 : 3 reached 1.41% under the illumination of air mass 1.5 (AM1.5) (80 mW/cm²), and this was an improvement in comparison with 0.24% for BE–PPV and 1.32% for MEH–PPV under the same experimental conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Anticorrosive properties of epoxy resin coatings cured by aniline/p‐phenylenediamine copolymer

Aniline/p‐phenylenediamine copolymer [poly(ANI‐co‐p‐PDA)] was prepared by chemical oxidative polymerization. FTIR and ¹H‐NMR analysis indicate that the poly(ANI‐co‐p‐PDA) is oligomer with end‐capped amino groups, which can cure epoxy resin. The anticorrosion performance of carbon steel (CS) samples coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) and epoxy resin coating cured with triethylenetetramine exposed to 5 wt % NaCl and 0.1 mol/L HCl aqueous solution is studied by the potentiodynamic polarization and electrochemical impedance spectroscopy. The results show that the CS coated by epoxy resin coating cured with poly (ANI‐co‐p‐PDA) has more excellent corrosion protection than that of epoxy resin coating cured with triethylenetetramine. Raman spectroscopy analysis indicates that the surface of CS coated by epoxy resin coating cured with poly(ANI‐co‐p‐PDA) forms passive layer, which is composed of α‐Fe₂O₃. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(urethane‐co‐imidine)s having pendent phenyl and benzylidene groups using bisphthalides,bislactones and blocked polyurethane prepolymers

Poly(urethane‐co‐imidine)s were prepared using amine blocked polyurethane (PU) prepolymer. The PU prepolymer was prepared by the reaction of poly(propylene glycol) (PPG₂₀₀₀) and 2,4‐tolylene diisocyanate (TDI) and end capped with N‐methyl aniline. The PU prepolymer was then reacted with bisphthalides and bislactones, until the evolution of carbon dioxide ceased. Polymerization reactions with bispthalides and bislactone took more time than with dianhydrides. Polymers were characterized by FTIR, GPC, TG and DSC analyses. Molecular weights of the poly(urethane‐co‐imidine)s were found to be lower than that of poly(urethane‐co‐imide)s. Compared to poly(urethane‐co‐imide)s all poly(urethane‐co‐imidine)s showed high glass transition temperature and crystallization peak in DSC. The thermal stability of the polyurethanes was found to increase with the introduction of imidine component. © 2001 Society of Chemical Industry     

Synthesis and characterization of thermotropic liquid crystalline poly(ester‐imide‐ketone)

A series of poly(ester imide ketone)s derived from N,N′‐hexane‐1,6‐diylbis(trimellitimide), 4,4′‐dihydroxybenzophenone, and p‐hydroxybenzoic acid (PHB) were synthesized by the direct polycondensation method in benzene sulfonyl chloride, dimethylformamide, and pyridine with varied PHB contents. The liquid crystalline behavior and thermal properties of the poly(ester imide ketone)s were characterized by polarized‐light microscopy, wide‐angle X‐ray diffraction, thermogravimetric analysis, differential scanning calorimetry, and temperature‐modulated differential scanning calorimetry (MDSC). The results showed that the synthesized polymers possessed a nematic thermotropic liquid crystalline characteristic and high thermal stability. The liquid crystalline polymers, with a PHB content ranging from 0 to 50 mol %, exhibited multiple phase transitions as evidenced by the MDSC results. A transitional smectic phase from solid state to nematic thermotropic liquid crystalline state was observed, and a transition model is proposed. Under certain conditions, the polymer with 33 mol % PHB content showed two significantly different liquid crystalline textures. This type of liquid crystalline polymer exhibited excellent fiber forming. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1045–1052, 2003     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Synthesis and characterization of new thermally stable poly(ester‐imide)s derived from 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl and various aromatic dihydroxy compounds

A series of new alternating aromatic poly(ester‐imide)s were prepared by the polycondensation of the preformed imide ring‐containing diacids, 2,2′‐bis(4‐trimellitimidophenoxy)biphenyl (2a) and 2,2′‐bis(4‐trimellitimidophenoxy)‐1,1′‐binaphthyl (2b) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. A model compound (3) was also prepared by the reaction of 2b with phenol, its synthesis permitting an optimization of polymerization conditions. Poly(ester‐imides) were fully characterized by FTIR, UV‐vis and NMR spectroscopy. Both biphenylene‐ and binaphthylene‐based poly(ester‐imide)s exhibited excellent solubility in common organic solvents such as tetrahydrofuran, m‐cresol, pyridine and dichloromethane. However, binaphthylene‐based poly(ester‐imide)s were more soluble than those of biphenylene‐based polymers in highly polar organic solvents, including N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide and dimethyl sulfoxide. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 261 and 315 °C. Thermal behaviour of the polymers obtained was characterized by thermogravimetric analysis, and the 10 % weight loss temperatures of the poly(ester‐imide)s was in the range 449–491 °C in nitrogen. Furthermore, crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resultant poly(ester‐imide)s exhibited nearly an amorphous nature, except poly(ester‐imide)s derived from hydroquinone and 4,4′‐dihydroxybiphenyl. In general, polymers containing binaphthyl units showed higher thermal stability but lower crystallinity than polymers containing biphenyl units. Copyright © 2005 Society of Chemical Industry     

Polycarbonate microspheres containing tumor necrosis factor‐α genes and magnetic powder as potential cancer therapeutics

Amphiphilic polycarbonate copolymers including methoxy‐terminated poly(ethylene glycol)‐co‐poly (5,5‐dimethyl trimethylene carbonate) [Poly(PEG‐b‐TMC)] and poly(ethylene glycol)‐co‐poly(trimethylene carbonate) [Poly(PEG‐b‐DTC)] were synthesized. The water‐in‐oil‐in‐water (W/O/W) solvent evaporation technique was adopted to produce anticancer magnetic Poly(PEG‐b‐DTC) microspheres containing tumor necrosis factor‐α (TNF‐α) genes and Fe₃O₄ magnetic ultrafine powder. Drug release studies showed that the microspheres can sustain a steady release rate of TNF‐α genes in 0.1M phosphate buffer saline solution in vitro for up to 60 h. In vitro cytotoxicity assays demonstrated that the microspheres have high inhibition and antitumor action to human hepatocellular carcinoma (Bel‐7204) cells in vitro. In vivo inhibition on the growth of hepatic carcinomas and histopathologic observation indicated that the microspheres possess a markedly high antitumor activity to human hepatocellular carcinoma (Bel‐7204). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of novel optically active poly(ester‐imide)s with benzophenone linkages by microwave‐assisted polycondensation

A new simple and rapid polycondensation reaction of 4,4′‐carbonyl‐bis(phthaloyl‐L ‐alanine)diacid chloride [N,N ′‐(4,4′‐carbonyldiphthaloyl)]bisalanine diacid chloride with several diphenols, such as bisphenol‐A, phenolphthalein, 1,8‐dihydroxyanthraquinone, 4,4′‐dihydroxybiphenyl, 1,5‐dihydroxynaphthalene and hydroquinone, in the presence of a small amount of a polar organic medium such as o‐cresol was performed using a domestic microwave oven. The polycondensation reaction proceeded rapidly and was almost complete within 12 min to give a series of poly(ester‐imide)s with inherent viscosities of about 0.35–0.58 dl g⁻¹. The resulting poly(ester‐imide)s were obtained in high yield and are optically active and thermally stable. All the above compounds have been fully characterized by IR spectroscopy, elemental analysis, inherent viscosity (η_inh), solubility test and specific rotation. Thermal properties of the poly(ester‐imide)s have been investigated using thermal gravimetric analysis (TGA). © 2000 Society of Chemical Industry     

Toughening of epoxy resins by modification with aromatic polyesters

Aromatic polyesters, prepared by the reaction of phthalic or isophthalic acids and α,ω-alkanediols, were used to reduce the brittleness of bisphenol-A diglycidyl ether epoxy resin cured with methyl hexahydrophthalic anhydride. These polyesters were effective as modifiers for toughening of the epoxy resin system. The most suitable composition for modification of the epoxy resins was inclusion of 20 wt % of poly(ethylene phthalate) (MW 7200), which resulted in a 150% increase in the fracture toughness (K_IC) of the cured resin at no expense of its mechanical properties. The effectiveness of poly(alkylene phthalate)s as modifiers decreased with increasing the chain length of alkylene units. The toughening mechanism was discussed based on the morphological and dynamic mechanical behaviors of the modified epoxy resin system.