The measurement of the glass transition temperature of sucrose and maltose solutions with added NaCl

The effect of added NaCl on the glass transition temperatures of 200 and 300 g kg⁻¹ sucrose and maltose solutions was determined using DSC and capacitance measurements. Negative shifts of around 4 °C were seen upon the addition of 0.1 mol kg⁻¹ NaCl, consistent with the freezing point depression expected for the maximally freeze‐concentrated solutions. Changes in the capacitance were seen which matched both the onset of the devitrification event and the main heat capacity step seen in DSC scans. © 2000 Society of Chemical Industry     

Reduction of sodium and increment of calcium and ω‐3 polyunsaturated fatty acids in dry fermented sausages: effects on the mineral content,lipid profile and sensory quality

BACKGROUND: A combined technological approach was applied in the development of healthier dry fermented sausages: a partial substitution of the pork back fat by pre‐emulsified linseed oil and a partial replacement of sodium chloride with calcium ascorbate at two different levels, leading to low amounts of salt (14gSalt and 10gSalt, with 14 g and 10 g NaCl per kg of mixture, respectively). RESULTS: The developed products (14gSalt and 10gSalt) showed adequate results for a_w (0.85 and 0.87) and pH (4.98 and 5.21), and low lipid oxidation values (1.4 × 10^?4 and 1.5 × 10^?5 g malondialdehyde (MDA) kg^?1). The lipid modification led to a significantly higher supply of ω‐3 (23.3 g kg^?1) compared to the control (3.2 g kg^?1). Simultaneously, reductions of 38% and 50% in sodium content and a calcium supply of 4 and 5.2 g kg^?1 were achieved in the 14gSalt and 10gSalt formulations, respectively, compared to the control products (26 g salt and 0.87 g kg^?1 Ca). Instrumental analysis of colour and texture and sensory studies demonstrated that the organoleptic quality of the new formulations was similar to that of traditional products. CONCLUSIONS: The developed dry fermented sausages showed healthier properties than traditional ones owing to their reduced sodium and higher calcium content and a significant supply of ω‐3 fatty acids. © 2012 Society of Chemical Industry     

Efficacy of propionates and benzoates on the control of growth of Eurotium species in bakery products with near neutral pH

The effects of propionic acid, sodium propionate and benzoic acid on growth of various Eurotium isolates when added to a bakery product analogue were tested under various environmental conditions. The water activity of the products was adjusted to values in the range of 0.75–0.90 a_w, and storage temperatures were in the range of 15–30 °C. Propionates were added in concentrations ranging from 0.5 to 5 g kg^?1, while benzoic acid was added in the range of 0.25–1 g kg^?1. It was observed that 0.25 and 0.5 g kg^?1 concentrations sometimes enhanced isolate growth. When using sodium propionate, the highest concentration, 5 g kg^?1, completely inhibited growth under all conditions except for 0.85–0.90 a_w at 25–30 °C, while propionic acid completely prevented fungal spoilage regardless of the abiotic conditions assayed. On the other hand, benzoic acid at a given concentration had a wider effectiveness, thus used at 1 g kg^?1 concentration prevented growth under all conditions except for 0.90 a_w and 25–30 °C. It was concluded that trying to reduce the applied concentrations of these weak acid preservatives would be counterproductive and that, except for propionic acid, even at the higher permitted concentrations their use is not suitable for these near neutral pH products when their water activity is high (0.90 a_w). Copyright © 2004 Society of Chemical Industry     

Effects of oligosaccharides on phase transition temperatures and rheological characteristics of waxy rice starch dispersion

BACKGROUND: The creation of starch‐based foods incorporated with functional ingredients such as probiotics is of great current interest in the food industry. This study aimed to investigate the effects of prebiotic oligosaccharides on the phase transition temperatures and rheological characteristics of waxy rice starch dispersions. Four oligosaccharides were applied to the rice starch dispersions: chitooligosaccharides, fructooligosaccharides, isomaltooligosaccharides and xylooligosaccharides. RESULTS: The addition of 125 g kg^?1 oligosaccharides elevated the onset and peak temperatures for gelatinisation of 200–400 g kg^?1 waxy rice starch dispersions. The temperature of the storage modulus (G′) for gelatinisation increased markedly on adding fructooligosaccharides to 200–300 g kg^?1 waxy rice starch. For gelatinisation of 300 g kg^?1 rice starch dispersion the effectiveness of the oligosaccharides in changing the above parameters was as follows: chitooligosaccharides > fructooligosaccharides > isomaltooligosaccharides > xylooligosaccharides. Moreover, their effectiveness was dependent on the amylose content, as illustrated by comparing waxy and non‐waxy rice starches (amylose contents 9–256 g kg^?1). Importantly, the logarithmic G′₉₅ change was linearly and negatively correlated with amylose content. CONCLUSION: The results suggest that oligosaccharide‐containing rice starch dispersions may potentially be used for the formulation of oligosaccharide‐containing starchy functional foods owing to the rheological changes of these starch dispersions. Copyright © 2011 Society of Chemical Industry     

Interaction between lactose levels and antimicrobial growth promoters on growth performance of weanling pigs

In experiment 1, 224 pigs (initially 8.85 kg and 28 ± 2 days of age) were used in a 2 × 2 factorial arrangement of treatments to investigate the interaction between lactofeed (LF70) (860 g kg^?1 whey permeate, 140 g kg^?1 soya bean meal) level (175 g kg^?1 and 350 g kg^?1) and avilamycin (0 and 40 mg kg^?1) inclusion in piglet starter diets. Pigs were fed starter diets from day 0 to day 22 and a transition diet was fed from day 23 to day 39. The inclusion level of LF70 in the transition diet was 75 g kg^?1 and 150 g kg^?1. Pigs fed 350 g kg^?1 LF70 had a higher daily gain (ADG) (p < 0.01) and an improved feed conversion ratio (FCR) (p < 0.05) during the starter period than the pigs fed 175 g kg^?1 LF70. Pigs fed medicated diets had a higher ADG (p < 0.05) and an improved FCR (p < 0.05) than the non‐medicated fed pigs during the starter period. There was an increase in feed intake (AFI) (p < 0.05) during the transition period with increasing levels of LF70. There was an improvement in FCR during the transition period with the inclusion of avilamycin (p < 0.01). There was a significant interaction (p < 0.01) between LF70 and avilamycin for ADG during the transition period. The inclusion of avilamycin at 175 g kg^?1 LF70 inclusion had no effect (p > 0.05) on ADG. However at 350 g kg^?1 LF70 inclusion the pigs offered medicated diets had a higher ADG (p < 0.001) compared with non‐medicated diets. In experiment 2, 224 pigs (initially 8.85 kg and 28 ± 2 days of age) were used in a 2 × 2 factorial to investigate the interaction between LF70 level (175 g kg^?1 and 350 g kg^?1) and zinc oxide (ZnO) (0 and 3.1 g kg^?1) inclusion in piglet starter diets. The inclusion level of LF70 in the transition diet was 75 g kg^?1 and 150 g kg^?1 and of ZnO was 2 g kg^?1. There was a significant increase (p < 0.05) in ADG with increasing levels of LF70 during the starter period. The inclusion of ZnO during the starter period resulted in an increase in ADG (p < 0.001) and FCR (p < 0.05) compared with no ZnO inclusion. Neither the inclusion of zinc oxide not of LF70 had an effect (p > 0.05) on performance during the transition period. In conclusion the supplementation of starter diets with increasing levels of LF70, ZnO and avilamycin resulted in increased ADG and improved FCR. Copyright © 2004 Society of Chemical Industry     

Metal levels in Trachurus trachurus and Cyprinus carpio in Turkey

Concentrations of five toxic metals were determined in two fish species from Turkish cities during 2010–2011. The obtained lead concentrations for all of the studied Trachurus trachurus (mean 777 μg kg^?1) and Cyprinus carpio (mean 439 μg kg^?1) samples were found to be higher than the maximum level (ML) of 300 μg kg^?1, while Cd concentrations in the same samples were lower than the ML. Mean chromium (501 μg kg^?1), Ni (272 μg kg^?1) and Cu (785 μg kg^?1) concentrations in T. trachurus were significantly higher than in C. carpio (336 μg Cr kg^?1, 229 μg Ni kg^?1 and 394 μg Cu kg^?1), similar to those of Pb and Cd. Measured Pb concentrations in T. trachurus tissues are significantly higher than the ML, while those of Cd in both T. trachurus and C. carpio species were lower than the ML values.     

Viscoelastic properties of caseinmacropeptide isolated from cow,ewe and goat cheese whey

Caseinmacropeptide (CMP) is a C‐terminal glycopeptide released from κ‐casein by the action of chymosin during cheese‐making. It is recognised as a bioactive peptide and is thought to be an ingredient with a potential use in functional foods. CMP occurs in sweet cheese whey and whey protein concentrate (WPC). Its composition is variable and depends on the particular whey source and the fractionation technology employed in the isolation. There were no significant (P < 0.05) differences in the relative apparent viscosities between species of CMPs (cow, ewe and goat). Analyses at different pH (2, 4, 7, 10), ionic strength (0, 0.2, 0.4 and 0.7 as NaCl molarity) and protein concentration (50, 100 and 200 g kg^?1) at temperatures from 10 to 90 °C carried out found pH 7 and high protein concentration (200 g kg^?1) conditions to be the best for CMP solutions to keep low and constant relative viscosity values with increasing temperature up to 75 °C. The viscoelastic properties–storage modulus, loss modulus and phase angle–of the different CMPs and WPC solutions were determined. Heat‐induced rheological changes in CMP solutions occurred at moderate temperatures (40–50 °C) with no appreciable differences in viscosity. Gelation took place significantly (P < 0.05) earlier in goat CMP (41 °C), followed by cow CMP (44 °C), ewe CMP (47 °C) and WPC (56 °C). Heating at 90 °C showed that WPC required significantly (P < 0.05) longer times to form gels (>5 min) than the CMPs (<5 min). WPC gels had higher (>20°) phase angle than CMP (<20°), which could be associated with untidy structures, limiting elastic properties of the gel. Copyright © 2006 Society of Chemical Industry     

Aflatoxins in composite spices collected from local markets of Karachi,Pakistan

This survey was carried out to evaluate the occurrence of total aflatoxins (AFs; B₁+B₂+G₁+G₂) in unpacked composite spices. A total of 75 samples of composite spices such as biryani, karhai, tikka, nihari and korma masalas were collected from local markets of Karachi, Pakistan, and analysed using HPLC technique. The results indicated that AFs were detected in 77% (n = 58) samples ranging from 0.68 to 25.74 µg kg^?1 with a mean of 4.63 ± 0.95 µg kg^?1. In 88% (n = 66) samples, AFs level was below the maximum limits (ML = 10 µg kg^?1) as imposed by EU. Furthermore, 61% (n = 46) tested samples contained AFs level between 1 and 10 µg kg^?1, 9% (n = 7) exhibited AFs contamination ranged 10?20 µg kg^?1 and only 3% (n = 2) of the investigated samples contained AFs levels higher than the ML of 20 µg kg^?1 for total aflatoxins as set by the USA. It was concluded that there is need to establish a strict and continuous national monitoring plan to improve safety and quality of spices in Pakistan.     

Occurrence of the C-series fumonisins in maize from the former Transkei region of South Africa

Fumonisins are a group of structurally related mycotoxins produced mainly in maize by Fusarium verticillioides and F. proliferatum. The most abundant naturally occurring analogue is fumonisin B₁ (FB₁), with lesser amounts of fumonisin B₂ (FB₂) and fumonisin B₃ (FB₃) occurring. The C-series fumonisins (FCs) are structurally analogous to the B-series but lack the C-1 methyl group. Good and mouldy subsistence-grown maize samples were collected from the Centane and Bizana districts in the former Transkei region of South Africa. After extraction with methanol/water and clean-up on strong anion exchange solid phase extraction cartridges, FB₁, FB₂, FB₃, FC₁, FC₃ and FC₄ were determined by reversed-phase LC–MS/MS using positive ion electrospray ionisation. FB₁ levels in both good and mouldy maize from Centane (means (±SD) 2.75?±?2.24 and 23.4?±?12.5?mg?kg^?1, respectively) were higher than the corresponding levels in maize samples from Bizana (means 0.056?±?0.157 and 3.71?±?5.01?mg?kg^?1, respectively). Similarly, FC₁ levels in both good and mouldy maize from Centane (means 0.107?±?0.099 and 0.814?±?0.391?mg?kg^?1, respectively) were higher than in Bizana, where FC₁ was detected in only one (0.018?mg?kg^?1) of 19 good maize samples and occurred in mouldy maize with a mean of 0.102?±?0.135?mg?kg^?1. A significant correlation (r?=?0.982, p?<?0.01) was observed between FB₁ and FC₁ levels in all samples, with FC₁ levels at 3.3% of the corresponding FB₁ levels. FC₄ levels were similar to FC₁, whereas only low amounts of FC₃ were detected.     

Pharmacokinetics of tulathromycin in edible tissues of healthy and experimentally infected pigs with Actinobacillus pleuropneumoniae

The aim of this study was the comparison of the tissue pharmacokinetics of tulathromycin in healthy pigs and pigs experimentally infected with Actinobacillus pleuropneumoniae (App). Tulathromycin was given to 24 healthy and 24 infected pigs by intramuscular injection at a single dosage of 2.5 mg kg^?1 body weight (b.w.). Pigs were euthanised at each group and then samples of liver, kidney, muscle, injection site and skin with fat were taken at scheduled time points. Drug concentrations were determined by LC-MS/MS. In this study, higher values of the area under the concentration–time curves (AUC) were calculated in all tissue samples taken from infected than healthy pigs. In pigs with App the AUCs of liver, kidney, muscle, skin with fat and injection site were 1111, 1973, 235, 181 and 2931 mg kg^?1 h, while in pigs without inflammation they were 509, 1295, 151, 111 and 1587 mg kg^?1 h, respectively. Maximum drug tissue concentrations (C_max) in infected animals were 2370, 6650, 2016, 666 and 83 870 µg kg^?1, while in healthy pigs they were 1483, 6677, 1733, 509 and 55 006 µg kg^?1, respectively. The eliminations half-times (T_1/2) were respectively longer in all tissue samples taken from infected animals (from 157.3 to 187.3 h) than in healthy ones (from 138.6 to 161.2 h). The tulathromycin tissue concentrations were significantly higher (p < 0.05) in all tissue samples of the infected pigs compared with the healthy animals at 360 h (from 0.0014 to 0.0280) and at 792 h (from 0.0007 to 0.0242) after drug administration. The results suggest that the tissue pharmacokinetic properties and residue depletion of tulathromycin can be influenced by the disease state of animals.     

Preparation and characterization of high‐quality rice bran proteins

Rice bran contains 120–200 g kg^?1 protein in addition to a large amount of fat, carbohydrate, and phytic acid. Rice bran protein (RBP) fractions were refined by a two‐step preparation to eliminate residual carbohydrate. The first step involved the sequential extraction of defatted rice bran into RBP fractions using their distinct solubility to give 37 g kg^?1 of albumin, 31 g kg^?1 of globulin, 27 g kg^?1 of glutelin, and 2 g kg^?1 of prolamin. In the second step, carried out by dissolving in respective solvent and isoelectric precipitation, the protein content of each fraction increased from 69% to 97% for albumin, from 71% to 90% for globulin, from 74% to 83% for glutelin, and from 18% to 20% for prolamin. The low protein content in the prolamin fraction might be due to its low solubility in the protein assay. Emulsifying stability index and surface hydrophobicity increased in the second‐step preparation of albumin and globulin, but not of glutelin. Emulsifying properties of RBPs were lower than that of a soybean protein isolate. Denaturation temperatures and enthalpy values of denaturation for albumin, globulin, glutelin, and prolamin were 50.1 °C/1.2 J g^?1, 79.0 °C/1.8 J g^?1, 74.5 °C/3.0 J g^?1, and 78.5 °C/8.1 J g^?1, respectively. No significant differences in the denaturation temperatures and enthalpy values of denaturation of RBP fractions were obtained with these two‐step preparations (P < 0.05). Copyright © 2007 Society of Chemical Industry     

Aflatoxin occurrence in milk and supplied concentrates of goat farms of north‐eastern Italy

BACKGROUND: There is little information about the occurrence of aflatoxin M₁ in goat milk. A survey involving 17 dairy goat farms of north‐eastern Italy was completed during 2005 and 2006, in order to evaluate the prevalence of milk contamination and its relationship with type and level of concentrate supplied. RESULTS: 132 concentrate and 85 milk samples were collected during five farm visits and analysed for aflatoxins. Aflatoxin B₁ (AFB₁) was > 0.1 µg kg^?1 in two‐thirds of the feeds and > 5 µg kg^?1 in nine. Contamination was higher in maize than in other pure feeds (median: 0.8 versus 0.1 µg kg^?1); complementary feeds showed intermediate values. Aflatoxin M₁ (AFM₁) was > 3 ng kg^?1 in one‐third of milks and > 25 ng kg^?1 in three. All the milk samples were below EU statutory limits. The farm ranks for milk AFM₁ level and the peak of concentrate AFB₁ contamination were significantly correlated (0.642). CONCLUSIONS: Risk to human health was generally found to be absent, with only a few cases involving feed contamination to be monitored. The main aflatoxin risk for goat milk could arise from maize and maize‐based concentrates in the more intensive breeding conditions. Copyright © 2008 Society of Chemical Industry     

Aflatoxins in animal feed in Iran

One hundred and forty-six samples of animal feed (barley, n = 60; wheat bran, n = 22; wheat dry pulp, n = 29; and canola meal, n = 35) were collected in 2011 from Mashhad (Khorasan, Iran). Aflatoxins (AFs) were determined in these samples after immunoaffinity column clean-up by high-performance liquid chromatography (HPLC) with fluorescence detection. Aflatoxin B₁ (AFB₁) contamination was found in 28 samples: in five of the barley samples (8.3%) at a mean level of 0.48 µg·kg^?1, in two wheat bran samples (9.0%) at a mean level of 0.88 µg·kg^?1, in 10 wheat dry pulp samples (34.5%) at a mean level of 0.30 µg·kg^?1 and in 11 canola meal samples (31.4%) at a mean level of 0.92 µg·kg^?1. AFB₁ levels were below the maximum levels of Iran regulations (5 µg·kg^?1) and the EU maximum limit (5 µg·kg^?1).     

Aflatoxin B1 in betel nuts (Areca catechu L.) imported to Pakistan from different regions of South Asia

Aflatoxin B₁ (AFB₁) levels were evaluated in betel nuts (Areca catechu L.) being imported to Pakistan during 2010–2011. In total, 278 betel nut samples (India = 21, Indonesia = 51, Sri-Lanka = 34 and Thailand = 172) were received from the Department of Customs and were analysed by thin layer chromatography (TLC). All Indian origin betel nuts showed AFB₁ contamination ranging from 11.7–262.0 µg kg^?1 with a mean of 92.5 µg kg^?1. Among Indonesian and Sri Lankan shipments, 80.4% and 73.5% betel nuts were contaminated with AFB₁ ranging between 3.3–39.2 and 6.5–103.4 µg kg^?1 with a mean of 11.6 and 35.0 µg kg^?1, respectively. However, only 30.2% of Thailand origin samples showed AFB₁ contamination ranging 3.3–77.0 µg kg^?1 with a mean of 6.6 µg kg^?1. The widespread occurrence of AFB₁ increases the hazard associated with betel nuts. Thus, strict control is a pre-requisite for the production and import/export of psychoactive substances as betel nuts.     

Aflatoxin M1 contamination in cow and buffalo milk samples from the North West Frontier Province (NWFP) and Punjab provinces of Pakistan

A total of 178 milk samples (94 of buffalo and 84 of cow) were randomly taken from Punjab and the North West Frontier Province (NWFP) of Pakistan (n?=?89 in each province) and analysed for the presence of aflatoxin M1 (AFM₁) by HPLC-FLD. From Punjab about 46% of buffalo's and 49% of cow's milks were contaminated with AFM₁ as compared with 52% and 51% for milk samples from NWFP, respectively. Overall, the mean AFM₁ concentration was 0.046?µg?kg^?1 with a maximum of 0.350?µg?kg^?1. All samples complied with the Codex Alimentarius limit of 0.50?µg?kg^?1 for AFM₁ in milk, but 16.3% of samples exceeded the European Union maximum level of 0.05?µg?kg^?1. Another set of 415 buffalo's and cow's milk samples (213 morning milks and 202 evening milks) were analysed. Statistical analysis revealed significant differences (p?<?0.05) between mean AFM₁ concentrations in milk during the morning (0.043?µg?kg^?1) and the evening (0.028?µg?kg^?1) lactation times.     

Effect of freezing rate and frozen storage on starch–sucrose–hydrocolloid systems

Model food systems based on starch (100 g kg⁻¹), sucrose (150 g kg⁻¹) and water (750 g kg⁻¹) with and without the addition of a low proportion of hydrocolloid (xanthan gum, guar gum or sodium alginate) were gelatinised, frozen at different rates and stored to analyse textural changes by oscillatory rheometry. Differential scanning calorimetry (DSC) was used to analyse gelatinisation, amylopectin retrogradation and glass transition temperatures. Sucrose had a significant effect on the increase in the gelatinisation temperature as well as on the decrease observed in glass transition values. The onset temperature of the second step of the glass transition, corresponding to the heat capacity change close to ice melting (denoted Tg_im in the present work), ranged between −23.0 and −22.2 °C. Rheological viscoelastic tests showed an increase in the dynamic moduli G* and G ′ after slow freezing and during storage at −19 °C (T > Tg_im) in starch–sucrose systems that is related to sponge formation due to amylose retrogradation. DSC studies confirmed that also amylopectin retrogradation occurs during storage; however, samples containing gums did not develop the spongy appearance. Storage at the usual commercial temperatures (close to −18 °C, slightly above Tg_im) affects the quality of aqueous starch–sucrose pastes without gums owing to amylose and amylopectin retrogradation. However, when hydrocolloids are included in the formulations, the usual storage conditions allow the maintenance of acceptable textural attributes. © 2000 Society of Chemical Industry     

Aflatoxin M1 in raw milk from different regions of São Paulo state – Brazil

A total of 635 raw milk samples from 45 dairy farms, from three regions of São Paulo state – Brazil, were evaluated during 15 months for aflatoxin M₁ (AFM₁). AFM₁ was determined by high performance liquid chromatograph with fluorescence detection. AFM₁ was detected (>0.003 µg kg^?1) in 72.9%, 56.3% and 27.5% of the samples from Bauru, Araçatuba and Vale do Paraíba regions, respectively. The mean AFM₁ contamination considering all the samples was 0.021 µg kg^?1. Furthermore, the concentration of AFM₁ was quite different among Bauru (0.038 µg kg^?1), Araçatuba (0.017 µg kg^?1) and Vale do Paraíba (<0.01 µg kg^?1) regions. Only three samples (0.5%) had higher contamination than the tolerated limit in Brazil (0.50 µg kg^?1) and 64 samples (10.1%) had a higher contamination than the maximum limit as set by the European Union (0.050 µg kg^?1). The estimated AFM₁ daily intake was 0.358 and 0.120 ng kg^?1 body weight per day for children and adults, respectively.     

Co-occurrence of aflatoxins,ochratoxin A and citrinin in “egusi” melon (Colocynthis citrullus L.) seeds consumed in Ireland and the United Kingdom

The natural co-occurrence of aflatoxins (AFs), ochratoxin A (OTA) and citrinin (CIT) in melon seed samples obtained from retailers and households in Ireland and the United Kingdom (UK) was evaluated. AFs and OTA were determined by HPLC with fluorescence detection while CIT was analysed by HPLC-MS/MS. AFB₁ was detected in all (100%) samples (mean = 9.7 μg kg^?1; range = 0.2–66.5 μg kg^?1). Mean total AFs was 12.0 μg kg^?1 (range = 0.3–82 μg kg^?1). Commercially retailed samples showed a significantly higher AFB₁ contamination (p < 0.05) than the household samples. OTA occurred in 3 (13.6%) samples, while 4 (18.2%) were contaminated with CIT at very low levels. In this study, 68% of the melon seed samples were contaminated above the 2 μg kg^?1 EU limit for AFB₁ in oilseeds. These results highlight the need for the development of strategies to reduce AF contamination in “egusi” for human consumption.     

Nutrient utilisation and performance of broilers in response to processed flaxseed dietary levels and vitamin B6 supplementation

The objective of this study was to determine the effects of processing and dietary inclusion level of flaxseed on broiler performance and nutrient utilisation. Flaxseed was included in the diet fed to day‐old broilers for the first 3 weeks as whole seed, ground seed, autoclaved whole seed, ground autoclaved whole seed or whole seed pelleted with the other ingredients, at levels of 0, 100, 120 and 140 g kg^?1. Chicks fed the pelleted flaxseed‐containing diets had heavier body weights, consumed more feed and had better feed/gain ratios than those fed the other flaxseed‐containing diets during the 3 weeks period (P < 0.01). The flaxseed level in the diet also had very significant (P < 0.01) effects on body weight and feed/gain ratio at the end of weeks 1 and 3, with the diets containing 100 g kg^?1 flaxseed resulting in better performance than the other flaxseed‐containing diets. Among the flaxseed containing diets, the pelleted diets led to higher apparent ether extract digestibilities, with values of 778 and 770 g kg^?1 for the diets containing 100 and 140 g kg^?1 flaxseed respectively. This better utilisation of ether extract by young broilers may explain the significantly (P < 0.05) higher AME_n (apparent metabolisable energy) value of 2924 kcal kg^?1 for the pelleted 140 g kg^?1 flaxseed‐containing diet. This was 15.4–17.5% higher than for the diets with the same level of flaxseed but provided as raw or autoclaved whole seed. The pelleting of flaxseed allowed an inclusion rate of 100 g kg^?1 without any reduction in the performance and nutrient utilisation of broilers. Copyright © 2003 Society of Chemical Industry     

Survey of aflatoxins in maize tortillas from Mexico City

In Mexico, maize tortillas are consumed on a daily basis, leading to possible aflatoxin exposure. In a survey of 396 2-kg samples, taken over four sampling days in 2006 and 2007 from tortilla shops and supermarkets in Mexico City, aflatoxin levels were quantified by HPLC. In Mexico, the regulatory limit is 12?µg?kg^?1 total aflatoxins for maize tortillas. In this survey, 17% of tortillas contained aflatoxins at levels of 3–385?µg?kg^?1 or values below the limit of quantification (<LOQ) and, of these, 13% were >12?µg?kg^?1 and 87% were below the regulatory limit. Average aflatoxin concentrations in 56 contaminated samples were: AFB₁ (12.1?µg?kg^?1); AFB₂ (2.7?µg?kg^?1); AFG₁ (64.1?µg?kg^?1) and AFG₂ (3.7?µg?kg^?1), and total AF (20.3?µg?kg^?1).