中国传统工艺振兴语境下的工匠精神

目的针对目前国家大力保护非物质文化遗产、倡导传统工艺振兴的语境下,如何传承和发扬好工匠精神,以促进当前我国非遗的保护和传统手工艺的传承与发展。方法以文献考据的方式,详细论述我国历史上不同时期关于工匠和工匠精神的解读,从古代"工"或"匠"到现代"大师"的演变,以及数千年来我国工艺文化传统所凝结成的大匠气度和大师境界,即将技艺臻于极致,将作品琢至完美的"工于技艺,匠心独运"的当代工匠精神。结论传承和发扬工匠精神须从政府加强指导、社会全力推崇、艺人珍视声誉等几方面形成合力,从而推动我国传统工艺行业的健康发展。     

The accuracy of calculation of orbits of best approach

A new formulation and solution of the problem of calculation of orbits of best approach is discussed. A qualitatively analytical approach to the organization of observations of the motion of artificial Earth satellites is used that makes it possible to calculate and to allow for optimal celestial-mechanics conditions, and to eliminate the effect of systematic observation errors, the effect of the Earth's gravitational field, and other regular perturbations on the solution accuracy.Translated from Izmeritel'naya Tekhnika, No. 6, pp. 28–29, June, 1993.     

Comparison of relative signal-to-noise ratios of different classes of imaging spectrometer

The continued development of new and fundamentally different classes of imaging spectrometer has increased both the scope and the complexity of comparisons of their relative signal-to-noise ratios. Although the throughput and multiplex advantages of Fourier-transform spectrometers were established in the early 1950s, the application of this terminology to imaging spectrometers is often ambiguous and has led to some confusion and debate. For comparisons of signal-collection abilities to be useful to a system designer, they must be based on identical requirements and constraints. We present unambiguous definitions of terminology for application to imaging spectrometers and comparisons of signal-collection abilities and signal-to-noise-ratios on a basis that is useful to a systems designer and inclusive of six fundamentally different classes (both traditional and novel) of imaging spectrometers.     

Inverse Problem of Evaluation of the Coefficient of Friction of Layers According to the Data of Measurements of the Surface Displacements

We consider a one-dimensional model of friction contact of two layers of different nature. The lower surface of the first layer is elastically fixed and the second layer is pressed to the upper surface of the first layer and moves along this surface with variable velocity. As a result of friction, heat is produced on the contact surface according to the Amonton's law. For known boundary and initial conditions, we pose the problem of evaluation of the friction coefficient and the intensity of friction heat flux according to given values of the vertical displacements of the upper surface of the second layer. The posed problem is reduced to the inverse contact problem of thermoelasticity described by the Volterra integral equation of the first kind. The solution of the problem obtained by the method of averaging of functional corrections enables us to study the time behavior of the indicated quantities for the entire period of interaction of the bodies and establish the dependence of the friction coefficient on the basic parameters of the process (sliding velocity, contact pressure, and temperature of the contact surface). The solution of the direct contact problem of thermoelasticity is used to perform the numerical verification of the proposed method for the solution of the inverse problem.     

Analysis of the effect of pressure on compression moulding of UHMWPE

Ultra-high molecular weight polyethylene (UHMWPE) powder is effectively processed by compression moulding due to its very high melt viscosity. Compression moulding involves application of temperature and pressure as a function of time. The pressure applied during processing has a significant influence on the part properties. The effect of pressure applied during compression moulding was studied by moulding parts at different pressures. Increase in the applied pressure causes increase in the melting and recrystallization temperatures. An increase in the pressure applied at the melt temperature (140°C) from 7.8 MPa to 15.6 MPa caused the crystallinity to increase from 54% to 61%, the stiffness of the moulded part to increase from 257 MPa to 435 MPa and oxidative index to increase from 0.055 to 0.059. Further increase in the pressure applied at the melt to 23 MPa caused the crystallinity to fall to 49%, the modulus to reduce significantly to 302 MPa and the oxidative index to change to 0.063. Increase in the pressure applied at the recrystallization temperature (91°C) from 38 MPa to 78 MPa increased the crystallinity from 54% to 65%, increased the modulus from 257 MPa to 279 MPa and increased the oxidative index from 0.055 to 0.065. Further increase in the applied pressure to 97 MPa, caused the crystallinity to drop slightly to 61% the modulus to reduce to 269 MPa, and the oxidative index to reduce to 0.057. The experiments showed that for obtaining maximum crystallinity and stiffness, the applied pressure should be within a narrow range. The highest recrystallization pressure (97 MPa) indicated the formation of extended-chain crystals in addition to the chain-folded crystals. The change in pressure applied at the melt temperature had a significantly greater effect on Young's modulus, as compared to change in pressure applied at the recrystallization temperature. Fourier transform–infrared spectroscopy analysis of the samples moulded at different pressures revealed that the increase in crystallinity and stiffness was accompanied by increase in oxidation within the part. By filling the die in a nitrogen atmosphere instead of air, the oxidation level in the moulded parts was reduced by almost 60%, without adversely affecting the crystallinity and the modulus. © 1998 Chapman & Hall     

Assessment of the cause of cracking of hydraulic hose clamps

The aim of this study was to determine the cause of failure of the shells of hydraulic hose crimped fittings. For the purpose of examination the damaged crimped shells, undamaged crimped shells and shells prior to crimping were used. Fractographic and metallographic analysis, including chemical microanalysis of inclusions, were performed to determine the cause of failure. For this investigation, optical and scanning electron microscopes and hardness measurement were used. Damaged crimped shells contained higher amount of inclusions compared to undamaged crimped shells and substantially differed in microstructure and hardness. Furthermore, different geometry of the cross section at outer edge containing more effective stress concentrators was observed on failed crimped shells. Based on microstructural observation in cross section, hardness measurements and analysis of inclusions, the conclusion is that cracking of the shells occurred mainly due to deviations in the manufacturing process, combined with lower quality of shell material. Modifications to the technology were suggested to prevent this kind of failure.     

空分设备冷箱的钢结构设计浅析

空分设备冷箱需要为内部设备提供一个超低温环境,对空分设备的安全运行有直接影响。介绍空分设备冷箱的工作特点以及冷箱钢结构设计的基本要点,详细说明了冷箱钢结构设计流程,并提出空分设备冷箱应该作为一个特殊的建筑物来进行设计和监管。     

Method of determination of emission properties of very weakly emitting species ensuring elimination of emission of impurities

This paper describes a new type of spectrofluorimeter, composed of a high-performance liquid chromatography (HPLC) system directly connected to a fluorescence detector and an absorption photodiode array detector, designed for studying the emission of weakly emitting species. Procedures for measurements of emission spectra (ES), emission excitation spectra (EES), and quantum yields of emission (PhiE) for very weakly emitting systems (PhiE>or=10(-7)) have been proposed. The original methodical solution allows verification of whether the emission observed comes solely from the compound studied (and not from its impurities) or from some photochemical or thermal process taking place during measurements. Thanks to the use of this new type of spectrofluorimeter, it is possible to establish with a high probability that the dependence of the shape and position of the ES on the excitation wavelength and the differences between EES and absorptance spectra are due to photophysical and/or photochemical properties of the compound studied and not due to the presence of emitting impurities. An especially interesting application of this method is to study the emission of species whose very weak emission is related to a very short lifetime as well as a low radiative rate constant. It is particularly suitable to the study of the emission properties of flexible molecules that can occur in a few conformers of different absorption and emission properties. The performance of the method is illustrated by the results of the emission studies carried out for Nalpha-acetyl-2-(uracil-5-yl)-L-tryptophan N-ethylamide.     

一起空分设备主换热器过冷故障的分析

在KDON-6000/3500型空分设备调试过程中,由于经验不足、操作不当,造成主换热器发生过冷故障。停运一台膨胀机,采用液氧返充操作使空分设备恢复正常工况。介绍故障发生经过和原因分析过程,以及防止同类故障再次发生的预防措施。     

等离子喷涂制备钢质涂布刮刀陶瓷涂层

以涂层平面度为评价标准,通过正交试验优化等离子喷涂工艺参数,在普通蓝钢刮刀上制备Al2O3-20%TiO2涂层,并对涂层的显微形貌、结合强度和耐磨性进行了研究.结果表明:弧电流550 A,喷涂距离100 mm,走枪速度0.8 m/s时等离子喷涂制备的Al2O3-20%TiO2涂层平面度最优;涂层具有良好的结合强度和耐磨性,结合强度大于30 MPa;磨粒磨损机理为切削和脆性断裂或脱落磨损.     

An investigation of the stability of numerical solutions of the equations of viscoelasticity

In this paper the correspondence principle is used to reduce the equations of viscoelasticity to the equations of elasticity by means of a Laplace transform. The finite element technique is used to approximate these equations in Laplace transform space. The approximating equations are then inverted to obtain a set of simultaneous Volterra integral equations. It is then shown how the introduction of certain auxiliary variables can be used to develop an integration scheme which considerably reduces computer storage requirements. The conditions under which this integration scheme is conditionally stable and unconditionally stable are both investigated and illustrated by means of examples.     

A new method of measurement of the different types of noisealtering the output signal of oscillators

Oscillator noise is generally modeled by a power law spectral density. Thus it is possible to characterize different noise sources, each of them corresponding to a particular power law. The measurement of the contribution of these sources is necessary to know their origin and to remedy these causes in order to improve oscillator performance. Usually, an estimation of the different types of noise present in a signal is obtained by using a variance. However, the sensitivity of these variances differs for each type of noise and then limits this method. On the other hand, the use of several variances, each of them more sensitive to one type of noise, permits one to notably improve the measurement accuracy. The method suggested here uses as many different variances as there are types of noise to measure. The improvement of measurement accuracy of the noise coefficient is discussed in this paper     

用多齿分度台检定经纬仪竖盘测角的不确定度评定

本文着重介绍了用多齿分度台作为基准经纬仪检定装置的结构，它由多齿分度台和平行光管作为角度标准器，模拟经纬仪使用环境进行检定；还介绍了该装置检定经纬仪竖盘的使用方法，分析了该装置经纬仪竖直方向测角不确定度组成和经纬仪一测回竖直角标准偏差不确定度组成，并对检定经纬仪竖盘的测角和一测回标准差两项检定的不确定度分量进行合成和扩展，得出符合检定规程的要求的结论。     

智能混凝土损伤自修复全过程分析

混凝土及其结构能够自动适应环境，在受到损伤后能够自行修复，是解决结构中的混凝土损伤的最佳途径。利用内置内含修复胶粘剂的胶囊实现了混凝土损伤的自修复，一旦混凝土中出现损伤或裂缝，胶囊破裂，其中的修复胶粘剂流出，使其修复。通过有限元软件ANSYS，建立了混凝土有限元模型，对其损伤自修复全过程进行了计算分析，揭示了损伤自修复的机理。最后，通过试验验证了计算分析方法的正确性和合理性。     

Intercomparison of Measurements of the Thermophysical Properties of Polymethyl Methacrylate

Results of an intercomparison of measurements of thermal conductivity, thermal diffusivity, specific heat capacity, and density of polymethyl methacrylate (PMMA) in the temperature range between –70°C and +80°C are presented. The purpose of this comparison is to investigate the variability of the results among guarded hot-plate (GHP) and guarded heat-flow meter (GHF) techniques on the one hand and among GHP/GHF and other measuring instruments on the other. The primary objectives are to characterize the material properties mentioned and to quantify the effects of thermal contact resistances and temperature measurements. With regard to future use of PMMA as a reference material, reference data for the thermal conductivity are derived.     

Symmetries of cross-polarization diffraction coefficients of gratings

In a recent paper [J. Opt. Soc. Am. A 16, 1108 (1999)] Logofatu et al. demonstrated by experimental and numerical evidence that the 0th-order cross-polarization (s to p and p to s) reflection coefficients of isotropic, symmetrical, surface-relief gratings in conical mount are identical. Here an analytical proof is given to show that the observed identity is merely a manifestation of the electromagnetic reciprocity theorem for the 0th-order diffraction of symmetrical gratings. The above result is further generalized to bianisotropic gratings, to the 0th-order cross-polarization transmission coefficients, and to the mth-order reflection and transmission coefficients when the wave vector of the incident plane wave and the negative of the wave vector of the mth reflected order are symmetrical with respect to the plane perpendicular to the grating grooves.     

Measurement of the Electromagnetic Parameters of Materials of Finite Thickness

An electrodynamic model of a dielectric plate, situated in the electromagnetic field of a slow wave, is considered. It is shown that the parameters of the plate and of the regions close to it can be represented by electric and magnetic type admittances. The relations obtained can be used to measure the thickness of thin films and to monitor the quality of radio-absorbing coatings.     

石油元素的文化符号在文具产品设计中的应用

目的 从石油文化特色出发,提炼视觉符号用于文具产品设计中,赋予其人文情怀,传承石油文化,发扬石油精神,唤起消费者的兴趣。方法 以“石油元素”的视觉符号提取为切入点,从造型、色彩、材质3个视角,物质、造型、精神3个层面,深入剖析其形象符号,提炼其中典型的视觉要素,将其创造性地应用于文具用品设计中,并形成系列。设计中注重造型元素和风格的统一,同时也考虑到人体工学与需求、功能、材料、颜色、美感等的协调。结论 对设计要素的创新应用,是构建特色城市外在形象和内在文化的重要媒介,“石油元素”的提炼和再设计,是需要在深入研究石油文化内涵的基础上,融入恰当的设计思维和表现形式,为具有石油特色的城市的纪念品设计提供一些思路。