Study of surface‐functionalized nano‐SiO2/polybenzoxazine composites

A series of the surface‐functionalized nano‐SiO₂/polybenzoxazine (PBOZ) composites was produced, and an attempt was made to improve the toughness of PBOZ material, without sacrificing other mechanical and thermal properties. A benzoxazine functional silane coupling agent was synthesized to modify the surface of nano‐SiO₂ particles, which were then mixed with benzoxazine monomers to produce the nano‐SiO₂‐PBOZ nanocomposites. The notched impact strength and the bending strength of the nano‐SiO₂‐PBOZ nanocomposites increase 40% and 50%, respectively, only with the addition of 3 wt % nano‐SiO₂. At the same load of nano‐SiO₂, the nano‐SiO₂‐PBOZ nanocomposites exhibit the highest storage modulus and glass‐transition temperature by dynamic viscoelastic analysis. Moreover, the thermal stability of the SiO₂/PBOZ nanocomposites was enhanced, as explored by the thermogravimetric analysis. The 5% weight loss temperatures increased with the nano‐SiO₂ content and were from 368°C (of the neat PBOZ) to 379°C or 405°C (of the neat PBOZ) to 426°C in air or nitrogen with additional 3 wt % nano‐SiO₂. The weight residue of the same nanocomposite was as high as 50% in nitrogen at 800°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of nano‐SiO2 on granule characteristic and fusion process of Poly(vinyl chloride‐co‐vinyl acetate)/nano‐SiO2 composite resin

Poly(vinyl chloride‐co‐vinyl acetate) (PVVA)/nano‐SiO₂ composite resin was prepared by radical suspension polymerization of the monomers in the presence of fumed nano‐SiO₂ particles premodified with γ‐methylacryloxypropyl trimethoxysilane. The cool dioctyl phthalate absorption percentage, granule porosity, and specific surface area of the composite resin were enhanced through incorporation of nano‐SiO₂ into the PVVA. Scanning electron microscope pictures showed the resin had higher porosity. PVVA/nano‐SiO₂ composite resin was mixed with pure PVC resin to form a mixture sample (polymer‐composite blend [PCB]) and the mixture was fused in the torque rheometer. The rheological test results indicated that, at a certain nano‐SiO₂ content, the fusion speed of PCB was accelerated and the fusion temperature of PCB was decreased, owing to nano‐SiO₂ dispersed evenly in the polymer matrix. When excessive nano‐SiO₂ was loaded, the fusion torque, the fusion time, and the fusion temperature of PCB were all increased. These properties are correlative to the dispersive density of nano‐SiO₂ in the polymer matrix. This study also demonstrated that the introduction of small amounts of nano‐SiO₂ into the resin increased the impact strength and tensile strength of PCB simultaneously. J. VINYL ADDIT. TECHNOL., 20:230–236, 2014. © 2014 Society of Plastics Engineers     

Effect of the mixing sequence on the morphology and properties of a polypropylene/polydimethylsiloxane/nano‐SiO2 ternary composite

Ternary composites of polypropylene (PP), polydimethylsiloxane (PDMS) elastomer, and nano‐SiO₂, prepared with three different mixing sequences, were studied for dispersion morphology and its effect on the crystallization of PP and the mechanical properties. The mixing sequence produced a significant effect on the dispersion morphology and, thereby, on the mechanical properties of the composites. A two‐step mixing sequence, in which nano‐SiO₂ was added in the second step to the PP/PDMS binary system, produced a significant encapsulation of nano‐SiO₂ by PDMS, and this, in turn, resulted in the poor modulus and impact strength of the composite. A one‐step mixing sequence of all three components produced a separated dispersion of PDMS and nano‐SiO₂ phases in the PP matrix with the occurrence of a fine band of nano‐SiO₂ particles at the boundaries of the PDMS domains and the presence of some nano‐SiO₂ filler particles inside the PDMS domains. This one‐step mixing sequence produced an improvement in the tensile modulus but a decrease in the impact strength with increasing nano‐SiO₂ content. In the third sequence of mixing, which involved a two‐step mixing sequence through the addition of PDMS in the second step to the previously prepared PP/nano‐SiO₂ binary system, the morphology of the dispersion showed separately dispersed PDMS and nano‐SiO₂ phases with a loose network of nano‐SiO₂ particles surrounding the PDMS domains. This latter series of ternary composites had the highest impact strength and exhibited high shear deformation under tensile and impact conditions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of in situ surface‐modified nano‐SiO2 on the thermal and mechanical properties and crystallization behavior of nylon 1010

Nylon 1010 composites filled with two types of surface‐modified SiO₂ nanoparticles (RNS and DNS) were prepared by melt blending. The mechanical properties of the composites were evaluated. The influences of the surface‐modified nano‐SiO₂ on the thermal stability, crystallization behavior, and microstructure of nylon 1010 were investigated by thermogravimetric analysis, differential scanning calorimetry (DSC), X‐ray diffraction, and transmission electron microscopy. And the interfacial interactions between the fillers and polymer matrix were examined using a Fourier transformation infrared spectrometer. It was found that the addition of the surface‐modified nano‐SiO₂ had distinct influences on the thermal stability, mechanical properties, and crystallization behavior of nylon 1010. RNS and DNS as the fillers had different effects on the mechanical properties of nylon 1010. The composites filled with RNS at a mass fraction of 1–5% showed increased break elongation, Young's modulus, and impact strength but almost unchanged or even slightly lowered tensile strength than the unfilled matrix. The DNS‐filled nylon 1010 composites had obviously decreased tensile strength, whereas the incorporation of DNS also contributed to the increase in the Young's modulus of nylon 1010, but less effective than RNS. Moreover, the nylon 1010 composites had better thermal stability than the neat polymer matrix, and the composites filled with RNS were more thermally stable than those filled with DNS. The difference in the crystallinity of neat nylon 1010 and its composites filled with RNS and DNS was subtle, although the surface‐modified nano‐SiO₂ could induce or/and stabilize the γ‐crystalline formation of nylon 1010. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Mechanical properties of low nano‐silica filled high density polyethylene composites

Modification of nanoparticles through graft polymerization is able to change the chemical nature of the particles' surfaces and provides an effective means for the preparation of nano‐fillers specified for composites manufacturing. The present work focuses on the mechanical role of grafted nano‐SiO₂ particles in high density polyethylene composites prepared by melt compounding. The experimental results show that at a content of 0.75 vol%, the modified nano‐silica results in a rise in tensile stiffness, tensile strength and impact strength of the composites. The grafted nanoparticles can improve the mechanical performance of the matrix polymer more effectively than the untreated version. In addition, a further enhancement of the composites stiffness and strength can be achieved by crosslinking the concentrated masterbatches, which has not yet been revealed in the authors' previous works on grafted nano‐SiO₂ particles/polypropylene composites. It is thus revealed that the introduction of the grafting polymers onto the nanoparticles increases the tailorability of the composites.     

Fabrication of a low‐cost nano‐SiO2/PVC composite ultrafiltration membrane and its antifouling performance

A novel low‐cost SiO₂/Polyvinylchloride (PVC) membrane with different nano‐SiO₂ particles loading (0–4 wt %) was prepared by the phase‐inversion process. The optimum nano‐SiO₂ dosage was determined as 1.5 wt % based on the casting solution compositions, the membranes' mechanical properties and hydrophilicities, the pure water fluxes, microstructures, and absorption of protein. Compared with the bare membrane, the membrane with 1.5 wt % nano‐SiO₂ addition presented better capabilities against the protein absorption and bacterial attachment, better antifouling performance, and higher flux recovery ratio in filtration of the supernatant liquor which collected from a secondary sedimentation tank in a municipal wastewater plant. The SiO₂/PVC membranes have applicable potential in the municipal wastewater treatment for their low price, good antifouling performance and high removal efficiencies of SS (over 97.2%), COD (up to 82.9%) and total bacteria (more than 93.6%). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41267.     

Effects of high nano‐SiO2 contents on properties of epoxy‐modified polybenzoxazine

High‐performance nanosilica composites based on epoxy‐modified polybenzoxazine matrices are developed. Chemorheological study of benzoxazine–epoxy resin mixtures reveals that processing window of the benzoxazine resin (BA‐a) is substantially broadened with an addition of the liquid epoxy. Glass transition temperature (T _g) of the BA‐a copolymerized with epoxy resin shows a synergistic behavior with a maximum T _g value (174°C) at the benzoxazine–epoxy mass ratio of 80:20. The copolymer at this composition is also used as a matrix for nano‐SiO₂ composites. A very low melt viscosity of the benzoxazine–epoxy mixtures promotes good processability with the maximum attainable nano‐SiO₂ loading up to 35 wt%. From scanning electron microscopy investigation, fracture surface of the 35 wt% nano‐SiO₂‐filled benzoxazine–epoxy composite reveals relatively homogeneous distribution of the nano‐SiO₂ in the copolymer with good particle wet‐out. In addition, very high reinforcing effect was also observed in such high content of the nano‐SiO₂, i.e., about 2.5 times in modulus improvement. This improvement is attributed to the strong bonding between the copolymer matrix and the nano‐SiO₂ through ether linkage as confirmed by Fourier‐transform infrared investigation. POLYM. COMPOS., 38:2261–2271, 2017. © 2015 Society of Plastics Engineers     

Preparation and performance of nano‐SiO2 stabilized Pickering emulsion type sizing agent for glass fiber

The nano‐SiO₂ particles modified by silane coupling agent A‐1100 were used for preparing the vinyl ester resin (VE) Pickering emulsion. The stable emulsion could be served as the film former of sizing agent for glass fiber (GF). The influence of the wettability and the addition amount of nano‐SiO₂ on the stability of film former emulsion was explored. The effect of nano‐SiO₂ Pickering emulsion type sizing agent on the properties of GF was investigated. SEM images show that there existed a layer of sizing agent film with nano‐SiO₂ particles evenly on the GF surface. The abrasion resistance of the sized GF reached 3,579 times and the stiffness was 69 mm. The strand integrity also performed well. The fracture strength of GF bundles treated by Pickering emulsion type sizing agent increased by 28.6% to 0.504 N/Tex compared with that of the unsized GF bundles. The interlaminar shear strength (ILSS) of GF/VE composites sized by self‐made sizing agent which contained nano‐SiO₂ has improved, compared to the unsized GF reinforced VE composite. POLYM. COMPOS., 37:334–341, 2016. © 2014 Society of Plastics Engineers     

Morphology and properties of PET/PA‐6/SiO2 ternary composites

A kind of hydrophilic nano‐SiO₂ was applied to poly(ethylene terephthalate)/polyamide‐6 (PA‐6) blends. Melt‐blended composites were prepared at various component ratios and different nano‐SiO₂ levels. Mechanical, morphological, dynamic mechanical, and thermal tests were carried out to characterize the properties, morphology, and compatibilization of the composites. Increased impact strength, tensile strength, and modulus were observed by adding nano‐SiO₂ particles in the blends. The nano‐SiO₂ particles were found to be preferentially dispersed in PA‐6, resulting in an increase of glass transition temperature and crystallization of PA‐6. The mechanism of morphology and properties changes was discussed based on the selective dispersion of nano‐SiO₂ particles in the blends. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2288–2296, 2007     

PMMA‐grafted‐silica/PVC nanocomposites: Mechanical performance and barrier properties

Poly(vinyl chloride) (PVC)/SiO₂ nanocomposites were prepared via melt mixture using a twin‐screw mixing method. To improve the dispersion degree of the nanoparticles and endow the compatibility between polymeric matrix and nanosilica, SiO₂ surface was grafted with polymethyl methacrylate (PMMA). The interfacial adhesion was enhanced with filling the resulting PMMA‐grafted‐SiO₂ hybrid nanoparticles characterized by scanning electron microscopy. Both storage modulus and glass transition temperature of prepared nanocomposites measured by dynamic mechanical thermal analysis were increased compared with untreated nanosilica‐treated PVC composite. A much more efficient transfer of stresses was permitted from the polymer matrix to the hybrid silica nanoparticles. The filling of the hybrid nanoparticles caused the improved mechanical properties (tensile strength, notched impact strength, and rigidity) when the filler content was not more than 3 wt %. Permeability rates of O₂ and H₂O through films of PMMA‐grafted‐SiO₂/PVC were also measured. Lower rates were observed when compared with that of neat PVC. This was attributed to the more tortuous path which must be covered by the gas molecules, since SiO₂ nanoparticles are considered impenetrable by gas molecules. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Investigation on the mechanical performances of ternary nylon 6/SEBS elastomer/nano‐SiO2 hybrid composites with controlled morphology

The distribution of maleated styrene‐hydrogenated butadiene‐styrene (mSEBS) elastomer and nano‐SiO₂ in nylon 6 matrix was controlled by varying the blending procedure. Nano‐SiO₂ particles with different surface properties (hydrophilic versus hydrophobic) were adopted to adjust their interactions with other components. Two different structures, separate dispersion of nano‐SiO₂ and elastomer particles as well as encapsulation of nano‐SiO₂ fillers by the elastomer, were obtained. The structures were confirmed through scanning electron microscope (SEM) investigation. The mechanical measurement results showed that the microstructure and the interactions among the components had dramatic influences on the final mechanical properties, especially Izod fracture toughness, for the ternary nanocomposites. The nanocomposites containing hydrophilic nano‐SiO₂ had better mechanical performances compared with the composites filled with hydrophobic SiO₂ when they were in the same microstructure. The nanocomposites with separate dispersion structure showed higher stiffness compared with those of encapsulation type. However, the separately dispersed nano‐SiO₂ particles restricted the cavitation of elastomer phases that led to low toughening effectiveness. The difference of cavitation intensity for elastomer phase was revealed by SEM investigation on the facture surfaces for the nanocomposites with the two different microstructures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The tribological properties of benzoxazine‐bismaleimides composites with functionalized nano‐SiO2

To improve the tribological properties of benzoxazine (BOZ) resin, bismaleimides (BMI) resin is chosen as organic phase, hyperbranched polysilane functionalized SiO₂ nanoparticles (HBPSi‐SiO₂) are chosen as inorganic modifiers to prepare HBPSi‐SiO₂/BOZ‐BMI composites using high shear and ultrasonic processes. The effect of content of HBPSi‐SiO₂ on the mechanical properties and tribological properties of the composites are investigated. The results show that suitable addition of HBPSi‐SiO₂ can largely enhance the impact strength, reduce the friction coefficient, and wear rate of BOZ‐BMI resin. Scanning electron microscopy is employed to research the wearing mechanism of materials. The severe wear of the BOZ pure resin is owing to fatigue wear, and the moderate wear of BOZ‐BMI resin is attributed to adhesive wear. While, the mild wear of the composites with HBPSi‐SiO₂ is due to abrasive wear. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of styrene‐acrylic emulsion by using nano‐SiO2 as seeds

A styrene‐acrylic/SiO₂ nanoparticle composite emulsion was prepared by using SiO₂ nanoparticles as seeds. The effect of factors such as the level of nano‐SiO₂, reaction temperature and ultrasound treatment of nano‐SiO₂ on the stability of the polymerization reaction was investigated. Water‐resistance of the emulsion was measured. The level of nano‐SiO₂ in the emulsion was determined by inductively coupled plasma (ICP) spectrometry. The particle morphology of the emulsion with nano‐SiO₂ was observed with transmission electron microscopy (TEM). The kinetics of the polymerization was also studied at various temperatures and various levels of nano‐SiO₂. They showed that the level of nano‐SiO₂ and reaction temperature had a great influence on the monomer conversion, particle size, coagulum content and viscosity of the emulsion. Nano‐SiO₂ treated by ultrasonics can increase the coagulum content greatly, but it does not improve the water resistance of the emulsion. The level of nano‐SiO₂ in the emulsion was lower than the theoretical value. The reaction kinetics indicated that the level of nano‐SiO₂ had less influence on the reaction rate than the reaction temperature. Even a small amount of nano‐SiO₂ can decrease the reaction rate. Copyright © 2004 Society of Chemical Industry     

Effect of interfacial interaction on the crystallization and mechanical properties of PP/nano‐CaCO3 composites modified by compatibilizers

To investigate the effect of interfacial interaction on the crystallization and mechanical properties of polypropylene (PP)/nano‐CaCO₃ composites, three kinds of compatibilizers [PP grafted with maleic anhydride (PP‐g‐MA), ethylene–octene copolymer grafted with MA (POE‐g‐MA), and ethylene–vinyl acetate copolymer grafted with MA (EVA‐g‐MA)] with the same polar groups (MA) but different backbones were used as compatibilizers to obtain various interfacial interactions among nano‐CaCO₃, compatibilizer, and PP. The results indicated that compatibilizers encapsulated nano‐CaCO₃ particles, forming a core–shell structure, and two interfaces were obtained in the compatibilized composites: interface between PP and compatibilizer and interface between compatibilizer and nano‐CaCO₃ particles. The crystallization and mechanical properties of PP/nano‐CaCO₃ composites were dependent on the interfacial interactions of these two interfaces, especially the interfacial interaction between PP and compatibilizer. The good compatibility between PP chain in PP‐g‐MA and PP matrix improved the dispersion of nano‐CaCO₃ particles, favored the nucleation effect of nano‐CaCO₃, increased the tensile strength and modulus, but reduced the ductility and impact strength of composites. The partial compatibility between POE in POE‐g‐MA and PP matrix had little effect on crystallization and mechanical properties of PP/nano‐CaCO₃ composites. The poor compatibility between EVA in EVA‐g‐MA and PP matrix retarded the nucleation effect of nano‐CaCO₃, and reduced the tensile strength, modulus, and impact strength. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The influence of silane treatment on nylon 6/nano‐SiO2 in situ polymerization

Silane treatment has been applied to the preparation of nylon 6/nano‐SiO₂ composites through in situ polymerization. The influence of such treatment on the reactivity of silica, polymerization of nylon 6, and the mechanical properties of the achieved composites has been studied. Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA) of silicas isolated from the composites have shown that the conversion of surface silanol groups to amino and epoxy groups did not cause a significant change in the reactivity of silica and that the percentage of silica surface grafting was around 15% for all treated and untreated silicas. End group analysis has shown that the presence of silica (pretreated or not) in the composite system resulted in the decrease of the average molecular weight of the polymer matrix. However, dynamic mechanical analysis and mechanical tests revealed that treating silica with silane improved the strength and toughness of the composite materials, while untreated silica improved their strength at the expense of toughness. This can be attributed to the existence of the flexible interlayer introduced by silane treatment. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 827–834, 2002; DOI 10.1002/app.10349     

Preparation and characterization of nano‐SiO2 reinforced alginate‐based nanocomposite films (II)

Crosslinked alginate‐based nanocomposites at different SiO₂ contents were prepared successfully by blending the nano‐SiO₂ solution into low concentration alginate solution (0.5 wt %), with the alginate concentration increased step by step to the resulted concentration, in this course glycerol was used as plasticizer and 5 wt % CaCl₂ as crosslinker. The combined effect of SiO₂ content (1.5–8 wt %) on the microstructural, physical, mechanical, and optical properties of the nanocomposite films were investigated. The results showed that tensile strength and elongation was improved by about 40.33% and 89%, respectively, upon increasing the SiO₂ content to 4.5 wt %. In addition, water vapor permeability and swelling degree decreased by 19% and 16% with increasing SiO₂ content up to 8 and 4.5 wt %, respectively with respect to pure crosslinked alginate film. Thermogravimetric analysis also revealed that nano‐SiO₂ can improve the thermal stability of sodium alginate films produced by this method. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45286.     

The influence of interphase on nylon‐6/nano‐SiO2 composite materials obtained from in situ polymerization

Three commercially available silane, titanate and aluminate based coupling agents were used to pretreat nano‐SiO₂ for the preparation of nylon‐6/nano–SiO₂ composites via in situ polymerization. The interphases formed in different composite systems and their influence on material properties were investigated. Results indicated that the interfacial interactions differed between composite systems, whereas rigidity and toughness of composites were all improved by addition of pretreated silicas at an optimal content of 4.3 wt%. The presence of pretreated silicas did not have a distinct influence in the non‐isothermal crystallization behaviour of the nylon matrix. The composites containing pretreated silicas had slightly higher dynamic viscosities and superior storage moduli at high frequency, compared with neat nylon‐6. Copyright © 2003 Society of Chemical Industry     

Nonisothermal crystallization of PP/nano‐SiO2 composites

The kinetics of nonisothermal crystallization of polypropylene (PP) containing nanoparticles of silicon dioxide (SiO₂) were investigated by differential scanning calorimetry (DSC) at various cooling rates. Several different analysis methods were used to describe the process of nonisothermal crystallization. The results showed that the Ozawa equation and Mo's treatment could describe the nonisothermal crystallization of the composites very well. The nano‐SiO₂ particles have a remarkable heterogeneous nucleation effect in the PP matrix. The rate of crystallization of PP/nano‐SiO₂ is higher than that of pure PP. By using a method proposed by Kissinger, activation energies have been evaluated to be 262.1, 226.5, 249.5, and 250.1 kJ/mol for nonisothermal crystallization of pure PP and PP/nano‐SiO₂ composites with various SiO₂ loadings of 1, 3, and 5%, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1013–1019, 2004     

Preparation and characterization of acrylic latex/nano‐SiO2 composites

Acrylic/nano‐silica composite latexes were prepared by blending via high shear stirring (SS) or ball milling (BM) and in situ polymerization (IS). For comparison, composites filled with micro‐silica were also prepared. The mechanical and optical properties of the polymers formed by the composite latex filled with nano‐ or micro‐silica were investigated using an Instron testing machine, by dynamic mechanical analysis, ultraviolet–visible spectrophotometry and transmission electron micrography. The results showed that SS and BM methods could obtain better nanocomposite latex and polymers than the IS method, characterized by better dispersion of nanoparticles, higher tensile strength and T_g for SS and BM than for IS. The increase in absorbance and reduction in transmittance of UV (290–400 nm wavelength) were observed as nano‐silica content increased, whereas the UV absorbance or transmittance basically were kept unchanged for the composites filled with micro‐silica. © 2002 Society of Chemical Industry     

Effects of ball milling dispersion of nano‐SiOx particles on impact strength and crystallization behavior of nano‐SiOx–poly(phenylene sulfide) nanocomposites

Ball milling and mixing with strong shear force and strike force were applied to get fine dispersion of nano‐SiO_x particles in poly(phenylene sulfide) (PPS) powder. Nano‐SiO_x/PPS composites were manufactured by intensive compounding with 3 wt% nano‐SiO_x particles. Effects of the ball milling dispersion on crystal behavior and impact strength of nano‐SiO_x/PPS nanocomposites were studied. Physical mechanisms of ball milling dispersion were investigated. Evaluations based on both WAXD and DSC indicates that crystallization behavior of nano‐SiO_x/heat‐treated PPS (HT‐PPS) nanocomposites was influenced by the ball milling process. Their crystallinity was 25% less while Izod impact strength was 89% better than those of as‐received neat PPS. Increased kinetic energy via ball milling by external work makes nano‐SiO_x able to overcome the attraction from itself to prevent agglomeration. Interfacial bonding of two phases between nano‐SiO_x and PPS was enhanced by crosslinking in HT‐PPS and reduction in surface tension of interface during ball milling. The bonds allow SiO_x to dissipate energy and thus improve PPS impact strength from the addition of nano‐SiO_x. POLYM. ENG. SCI., 46:820–825, 2006. © 2006 Society of Plastics Engineers