带执行器饱和的柔性关节机器人位置反馈动态面控制

针对带有执行器饱和的柔性关节机器人系统,提出一种位置反馈动态面控制,以实现机器人连杆的角位置跟踪.在一般动态面控制的设计框架下,设计观测器重构系统未知速度状态,利用径向基函数神经网络学习饱和非线性特性,结合“最小参数学习”算法减轻计算负担.通过Lyapunov方法证明得出闭环系统所有信号半全局一致有界,跟踪误差可以通过调节控制器参数达到任意小.仿真结果表明,控制系统能够克服外界干扰,有效补偿系统存在的执行器饱和,实现柔性关节机器人的准确跟踪控制.该方法避免了传统反演设计存在的“微分爆炸”现象,简化了设计过程.     

Fractional-order dynamics and adaptive dynamic surface control of flexible-joint robots

This paper establishes a novel fractional-order model for n-links flexible-joint (FJ) robots and proposes an adaptive dynamic surface control (DSC) scheme to address the tracking control problem. The fractional-order FJ model is built by fractional-order viscoelastic dynamics model to have a more concise form. An adaptive DSC strategy is proposed to address the tracking control problem based on backstepping method. By selecting the appropriate orders for fractional filters, the controller could solve the “explosion of complexity” problem. The unknown nonlinearities of FJ robot systems are approximated by Radial basis function (RBF) neural networks (NNs). Based on the Lyapunov stability theory, the bounds of all signals in the closed-loop system are achieved. The simulation results confirm the effectiveness of the presented control scheme.     

Postcapture robust nonlinear control for tethered space robot with constraints on actuator and velocity of space tether

Stabilization control is an essential mission for the tethered space robot‐target combination during the postcapture phase of tethered space robot (TSR). In this paper, the stabilization problem of such a tumbling combination is studied. With the consideration of the space tether and the attitude of the TSR's gripper, the dynamic model of the combination is first derived using Lagrange method. Then a robust nonlinear controller for the combination is proposed based on the backstepping control method. Considering the constraint on the velocity of the space tether, command filter method is utilized to guarantee the velocity of the space tether within a permitted range. A feedback term is designed to compensate the saturation of the thruster. Moreover, an adaptive law is designed to estimate the disturbance of parameter uncertainties and this disturbance is compensated in the proposed controller. Numerical simulations suggest that the proposed robust controller can realize the orbit and attitude stabilization of the combination; besides, the velocity of the space tether is effectively constrained and the parameter uncertainties of the combination can be compensated via the adaptive law. Copyright © 2016 John Wiley & Sons, Ltd.     

带有输出约束的柔性关节机械臂预设性能自适应控制

针对带有输出约束和模型不确定的柔性关节机械臂系统,提出一种基于时变障碍李雅普诺夫函数的预设性能自适应控制方法.通过构造指数衰减的时变约束边界,提出时变正切型障碍李雅普诺夫函数,能够同时适用于约束与非约束情况,进而拓宽传统对数型障碍李雅普诺夫函数的适用范围.此外,通过预先设置时变边界函数的相关参数,使得系统输出在初始阶段...     

具有执行器故障的不确定多智能体系统自适应动态面控制

本文研究了一类具有输入量化、未建模动态和执行器故障的非线性多智能体系统的一致跟踪问题.引入一个可量测的动态信号消除未建模动态对系统的影响.利用Young’s不等式和高斯函数的性质,有效地处理了多智能体邻居节点在设计的第一步中对子系统的耦合作用.通过将滞回量化器表示为具有有界系数和有界扰动的输入线性函数,并利用动态面控制方法,提出一种自适应神经网络动态面控制方案,简化了控制器的设计,保证了闭环系统的所有信号都是半全局一致终结有界的,所有跟随者都能实现期望的一致性.最后,仿真结果验证了所提出的自适应控制策略的有效性.     

performance control of robot manipulators with kinematics,dynamics and actuator uncertainties

This paper deals with the task‐space trajectory tracking control problem of robot manipulators. An improved adaptive backstepping controller is proposed to deal with the uncertainties in kinematics, dynamics, and actuator modeling. To avoid the explosion of computation in conventional backstepping techniques, a modified dynamic surface control algorithm is proposed, which guarantees the asymptotic convergence rather than the uniformly ultimately boundedness of tracking errors in conventional dynamic surface control methods. Furthermore, the expression of the norm of tracking errors is explicitly derived in relation to the controller parameters, which provides instructions on tuning controller parameters to adjust the system performance. Moreover, the passivity structure of the designed adaptation law is thoroughly analyzed. Simulation of a free‐floating space robot is used to verify the effectiveness of the proposed control strategy in comparison with the conventional tracking control schemes. Copyright © 2016 John Wiley & Sons, Ltd.     

Command filter-based adaptive control of flexible-joint manipulator with input saturation and output constraints

This paper focuses on the topic of adaptive neural tracking control for flexible-joint manipulator systems with output restrictions and input saturation. With the aid of the error compensation mechanism, command filter-based adaptive neural control is proposed for robotic systems driven by permanent magnet synchronous machine (PMSM). An auxiliary signal produced by the first-order linear system designed by the property of unmodeled dynamics is used to erase the dynamical uncertainties. The input saturation of system is estimated by $$-function with mathematical transformation. Using barrier Lyapunov function (BLF), each component constraint of output is tackled. During the virtual control design phase, radial basis function neural networks (RBFNNs) may reliably assess the unknown nonlinear continuous function. All the variables in the closed-loop system are proved to be semiglobally uniform ultimate bounded (SGUUB) by integrating all compensation signals into the overall Lyapunov function and using the defined compact set in the stability analysis of dynamic surface control (DSC). An applied example on robotic system is used to verify the effectiveness of the constructed design idea.     

Robust tracking control for a class of electrically driven flexible-joint robots without velocity measurements

This article addresses the motion tracking control for a class of flexible-joint robotic manipulators actuated by brushed direct current motors. This class of electrically driven flexible-joint robots is perturbed by time-varying parametric uncertainties and external disturbances. A novel observer-based robust dynamic feedback tracking controller without velocity measurements will be developed such that the resulting closed-loop system is locally stable, all the states and signals are bounded and the trajectory tracking errors can be made as small as possible. Only the measurements of link position and armature current are required for feedback and so the number of sensors in the practical implementation of the developed control scheme can be greatly reduced. The observer structure is of reduced order in the sense that the observer is constructed only to estimate the velocity signals and whose dimension is half of the dimension of flexible-joint robots. Especially, for the set-point regulation problem, the developed controller is simplified to a linear time-invariant controller. Consequently, the robust tracking control scheme developed in this study can be extended to handle a broader class of uncertain electrically driven flexible-joint robots and the developed robust control schemes possess the properties of computational simplicity and easy implementation. Finally, simulation results are presented to demonstrate the effectiveness of the proposed control algorithms.     

带执行器饱和的N 连杆机械臂输出反馈动态面控制

针对带执行器饱和的多关节刚性机械臂系统,提出一种基于RBF神经网络补偿的输出反馈动态面控制.通过观测器实现角速度的观测,采用RBF网络实现执行器饱和的补偿;通过Lyapunov方法证明闭环系统的稳定性,实现高精度的角度和角速度跟踪.仿真结果表明,所提出的方法能够有效补偿系统存在的执行器饱和,显著减小跟踪误差,并且对于外界干扰具有一定的鲁棒性.     

Type-2 fuzzy control for a flexible-joint robot using voltage control strategy

Type-1 fuzzy sets cannot fully handle the uncertainties. To overcome the problem, type-2 fuzzy sets have been proposed. The novelty of this paper is using interval type-2 fuzzy logic controller (IT2FLC) to control a flexible-joint robot with voltage control strategy. In order to take into account the whole robotic system including the dynamics of actuators and the robot manipulator, the voltages of motors are used as inputs of the system. To highlight the capabilities of the control system, a flexible joint robot which is highly nonlinear, heavily coupled and uncertain is used. In addition, to improve the control performance, the parameters of the primary membership functions of IT2FLC are optimized using particle swarm optimization (PSO). A comparative study between the proposed IT2FLC and type-1 fuzzy logic controller (T1FLC) is presented to better assess their respective performance in presence of external disturbance and unmodelled dynamics. Stability analysis is presented and the effectiveness of the proposed control approach is demonstrated by simulations using a two-link flexible-joint robot driven by permanent magnet direct current motors. Simulation results show the superiority of the IT2FLC over the T1FLC in terms of accuracy, robustness and interpretability.     

输入受限的非仿射纯反馈不确定系统自适应动态面容错控制

针对存在执行器故障和输入饱和受限的非仿射纯反馈不确定动态系统,提出了一种自适应动态面容错控制策略.在不损失模型精度和考虑系统输入饱和受限的前提下,基于中值定理将非仿射系统转化为具有线性结构的时变不确定系统,在此基础上,再利用参数自适应投影技术对有界不确定时变参数进行在线估计,参数估计误差和外界扰动采用非线性动态阻尼技术进行补偿,并利用双曲正切函数和Nussbaum函数处理系统输入饱和受限和控制增益函数方向未知的问题,同时将反演法和动态面法相结合设计鲁棒自适应控制器,消除了反演法的计算膨胀问题,并且在系统出现执行器失效故障的情况下可确保稳定跟踪.最后,根据解耦反推法,基于Lyapunov稳定性定理证明了闭环系统的半全局一致最终有界.仿真结果验证了所设计控制方案的可行性与有效性.     

一类非线性时滞系统的自适应动态面控制

本文对于一类含不确定输入时滞和干扰的非线性系统的跟踪控制问题提出了一种自适应动态面控制方案. 利用动态面控制方法避免了传统的后推设计中存在的复杂度爆炸问题. 分别构造了一个滤波器和一个虚拟观测器来产生辅助信号. 采用神经网络来逼近未知的连续函数. 跟踪误差被证明最终收敛到一个足够小的紧集. 给出了一个数字仿真示例验证了理论结果.     

Adaptive synchronization control design for flexible telerobotics with actuator fault and input saturation

This paper addresses the synchronization control problem of flexible telerobotics with actuator fault, input saturation, and asymmetrical time‐varying delays. A new adaptive antisaturation nonlinear fractional power proportional+damping fault‐tolerant control scheme is designed. With the new control algorithm, faster convergence rate and higher convergence precision can be guaranteed, as compared with the general proportion+damping control method. By choosing Lyapunov‐Krasovskii functional, it shows that the teleoperation system is stable under specific linear matrix inequality conditions. Thus, the allowable maximal transmission delay can be computed with the given controller‐design parameters. To validate the effectiveness of the proposed method, simulations on synchronization control system composed of 2 manipulators (master is rigid, and slave is flexible) are developed. Experiments on the PHANToM Premium 1.5A manipulators are also conducted and numerous experimental results are presented to show the superior performance of the proposed control scheme.     

Nussbaum‐type function–based attitude control of spacecraft with actuator saturation

This paper investigates the attitude stabilization problem of spacecraft subject to external disturbances and actuator saturation. A novel attitude control scheme is technically proposed by incorporating the Nussbaum gain technique into backstepping design. The key idea behind this is to introduce a special Nussbaum‐type function in order to compensate for the time‐varying nonlinear terms arising from input saturation. By exploiting the dynamic surface control technique, the problem of “explosion of terms” inherent in traditional backstepping designs is effectively eliminated and the computational burden is significantly reduced. Additionally, based on the selected Nussbaum‐type function, a constructive analysis methodology is presented, which plays an important role in analyzing the stability properties of the closed‐loop system. It is then proved that the proposed control scheme can guarantee the boundedness of all closed‐loop signals. Furthermore, the unwinding phenomenon is given a simple and effective remedy by resorting to suitable choices of the attitude error variable and the virtual control law. Finally, simulation experiments are carried out to assess the effectiveness and demonstrate the advantages of the proposed control scheme.     

输入受限机器人的鲁棒自适应输出反馈跟踪控制

在输入受限的情况下，通过一个线性一阶滤波器，实现机器人的鲁棒自适应输出反馈跟踪控制，解决了自适应控制算法的鲁棒性问题，即当满足持续激励条件及估计参数域包含参数真实值时，闭环系统能够实瑰渐近穗定跟踪，本算法简单有效，不仅提高了鲁棒性，改善了控制品质，同时对于参数域估计误差也具有很强的鲁棒性，仿真算饲验证了算法的有效性。     

输入时滞非线性系统的新型动态面Funnel控制

本文针对一类带有输入时滞的不确定非线性系统, 提出了新型动态面Funnel控制方案. 首先设计补偿动态 变量将输入时滞系统转换成无时滞的系统, 仅需在递归控制的最后一步补偿, 从而优化了控制器设计过程. 其次, 构造Funnel函数, 使系统的瞬态和稳态跟踪误差被限制在给定边界内. 最后, 提出新型非线性动态面控制方法, 不仅 避免了自适应反推控制中的“微分爆炸”问题, 而且消除了边界层误差, 使得系统的跟踪误差最终渐近收敛到零. 理 论分析表明该闭环系统的所有信号一致最终有界, 仿真结果验证了该控制方案的有效性.     

漂浮基空间机器人的径向基神经网络鲁棒自适应控制

针对一类同时具有参数及非参数不确定性的自由漂浮空间机器人系统的轨迹跟踪问题,采用了一种RBF神经网络的自适应鲁棒补偿控制策略.对于系统的参数不确定性,通过对径向基神经网络来自适应学习并补偿,逼近误差通过滑模控制器消除,神经网络权重的自适应修正规则基于Lyapunov函数方法得到;而非参数不确定通过鲁棒控制器来实时自适应...     

力矩输入有界的柔性关节机器人轨迹跟踪控制

为解决柔性关节机器人在关节驱动力矩输出受限情况下的轨迹跟踪控制问题,提出一种基于奇异摄动理论的有界控制器.首先,利用奇异摄动理论将柔性关节机器人动力学模型解耦成快、慢两个子系统.然后,引入一类平滑饱和函数和径向基函数神经网络非线性逼近手段,依据反步策略设计了针对慢子系统的有界控制器.在快子系统的有界控制器设计中,通过关节弹性力矩跟踪误差的滤波处理加速系统的收敛.同时,在快、慢子系统控制器中均采用模糊逻辑实现控制参数的在线动态自调整.此外,结合李雅普诺夫稳定理论给出了严格的系统稳定性证明.最后,通过仿真对比实验验证了所提出控制方法的有效性和优越性.     

Finite-time tracking control for robot manipulators with actuator saturation

This paper addresses the finite-time tracking of robot manipulators in the presence of actuator saturation. The commonly-used proportional-derivative (PD) plus dynamics compensation (PD+) scheme is extended by replacing the linear errors in the PD+ scheme with saturated non-smooth but continuous exponential-like ones. Advantages of the proposed controller include semi-global finite-time tracking stability featuring faster transient and high-precision performances and the ability to ensure that actuator constraints are not violated. This is accomplished by selecting control gains a priori, removing the possibility of actuator failure due to excessive torque input levels. Lyapunov's direct method and finite-time stability are employed to prove semi-global finite-time tracking. Simulations performed on a three degree-of-freedom (DOF) manipulator are provided to illustrate the effectiveness and the improved performance of the formulated algorithm.     

仿人机器人动态步行控制综述

综述了仿人机器人动态步行的研究历史和研究现状。归纳了动态步行的特点,分析了动态步行稳定性判定方法,介绍了基于ZMP的姿态稳定判据和基于庞加莱映射（Poincaré Map）的步态稳定判据。总结了仿人机器人学习适应复杂地面环境步行的方法,概述了动态步行控制实现的典型解决方案,指出了动态步行控制中待解决的问题,并探讨了未来的发展方向。