Sustainable development and child health

Although the Lew attachment was originally developed in 1977 to provide retention for overdentures fabricated in conjunction with subperiosteal implants, these attachments can be used with other types of implants. A case is presented describing the use of Lew attachments with a tapered bar and seven root form implants.     

Evaluation of consecutively placed unloaded root-form and plate-form implants in adult Macaca mulatta monkeys

The present paper describes 18 consecutively-treated non-human primates (Macaca mulatta) as part of a balanced block design study of 36 animals to examine osseointegration in root- and plate-form implants prepared by atraumatic preparation of bone. Clinical measurements around selected teeth and digital radiology were utilized to monitor periodontal disease and bone deposition around the unloaded implants. Once a month scaling procedures were utilized as a means of preventing further advance of periodontal disease. Results indicate that once-monthly regimen of scaling and root planing can prevent attachment loss of natural teeth and will not interfere with the healing of either type of implant; once-monthly scalings produce significant reduction in redness (P < .05) and reduced probing depths (P = .01). A second finding is that both root and blade implants show radiographic evidence of osseointegration in this primate model. The quantitative analysis demonstrates bone gain is not stabilized until 6 months after healing. The data may indicate that occlusal loading of mandibular implants at 3 months may be premature.     

Effect of vacuum ion-plasma treatment on the electrochemical corrosion characteristics of titanium-alloy implants

The effect of mechanical polishing and various types of vacuum ion-plasma treatment of model implants made of VT1-0, VT20, and VT6 titanium alloys on their electrochemical corrosion characteristics in a 0.9% NaCl solution (Ringer’s solution) is studied. Ion nitriding and the evaporation of a titanium nitride coating are shown to form a surface structure that provides an increase in the hardness, wear resistance, and corrosion resistance of these implants.     

Neck masses: diagnosis & treatment. (The occult primary tumor)

Solid dispersions of naltrexone in natural glycerides were used to form injectable implants which continuously release narcotic antagonists in vivo. The dispersions were formed and tested either as small cylindrical pellets, e.g. l x 3.0 mm in size, or as particles with diameters in size ranges between 125-250 mu, that are suspended in an aqueous methyl cellulose solution. Both types of implants delivered naltrexone to mice at rates that were effective in blocking the antiociceptive action of morphine for at least one month. The rate of naltrexone release was controlled by altering its concentration in the dispersion and by varying the glyceride composition. Degradation and absorption of the implants were found to depend on their composition, dimensions and location in the body. No appreciable tissue incompatibility was seen in mice, rats, rabbits, monkeys and swine, even when long-lasting preparations were removed a year after treatment.     

The use of poetry to test nursing knowledge

The biological compatibility of coatings of subcutaneous implants was studied in rat experiments. The implants were coated with hydroxyapatite and hydroxyapatite modified by chloromethylsilanthrane (silamine). The coatings were found to inhibit lipid peroxidation and form the optimal ratio of connective tissue biopolymers in capsules forming round the implants. Both types of hydroxyapatites used were characterized by high biological compatibility.     

Silicone breast implant litigation (Part 1)

Silicone breast implant litigation has escalated in the past couple of years with the Food and Drug Administration (FDA) investigation of silicone gel implants which resulted in finally removing the silicone gel implants from the market. Plaintiffs have linked various medical problems to the presence of silicone in the body. The FDA has stated that there is no medical evidence that silicone causes autoimmune disease. Silicone has never been shown to cause breast cancer. Breast implants can result in complications such as capsule contracture, gel bleed, implant rupture, calcifications around the implants, and possibly interference with mammography in the diagnosis of breast cancer. Plaintiffs have claimed that the implant manufacturers knew of the defects in the silicone shell implant covering, and covered up the facts. The product liability action has become a class action, and a proposed settlement has been made in terms of which implant recipients with any problems will be reimbursed. Furthermore, there will be coverage for future implant problems over the next 30 years. There will still be some litigation by those patients who have opted out of the settlement agreement.     

An in vitro and in vivo study of cytokines in the acute-phase response associated with bisphosphonates

The aim of this investigation was to evaluate clinically and histologically a new custom-made, root analogue titanium implant placed into extraction sockets in monkeys (Macaca fascicularis). Three adult monkeys were used in this investigation. After raising full thickness flaps on the buccal and lingual side, the upper central and lateral incisors were extracted. Each tooth root was machine copied to 1 titanium analogue using a new CAD/CAM-system. The implants were installed in the respective extraction sockets and the flaps sutured back. After 6 months of healing biopsies were taken and processed according to the cutting-grinding technique. The percentage of mineralized bone-to-implant contact was measured as a fraction of the rough implant surface using computer-assisted analysis. The main clinical problem that occurred during implant placement was the fracture of the buccal alveolar wall. The histometric evaluation showed a mean mineralized bone-to-implant contact of 41.2 +/- 20.6%. In this investigation it could be shown that implants fabricated by laser copying will osseointegrate. The presented data encourage the performance of clinical and experimental trials evaluating the new system utilizing improved second generation CAD/CAM equipment. Such studies are currently underway.     

Biomechanical considerations when combining tooth-supported and implant-supported prostheses

The force distribution of multiple tooth-supported and implant-supported prostheses is completely different. A direct correlation exists between the degree of flexion at the site of loading and the amount of force distribution to other members of the prosthesis. Micromovement produced by the periodontal fibers facilitates force distribution to all the root surfaces of the natural tooth abutments. The rigidity of the implant/abutment/prosthesis configuration concentrates the force at the crestal bone at the site of loading with limited distribution to the remaining implants. Differential mobility concentrates the force distribution to the bone support of the most rigid members of splinted natural teeth or to the implants when they are united with natural teeth in a combined prosthesis. Implants always support the natural teeth and never the other way around. Therefore a nonrigid attachment is recommended between a tooth-supported prosthesis and an implant-supported prosthesis when they are combined. However, when implants are interspersed with natural teeth in the same prosthesis, the restoration will be implant borne. This requires special force distribution analysis to prevent implant overload.     

Mandibular erosion from silastic implants: evaluation with a dental CT software program

Silastic implants used to augment the chin during cosmetic surgery may cause erosive bone changes and complications. We describe the radiologic appearance of these changes and the dental CT reformatting programs by which they may be assessed. Multiplanar CT scans of four patients with Silastic chin implants were evaluated retrospectively for implant density, presence and size of bone defects, relationship of defects to root apices, relationship of defects to mental foramen, and associated findings. The dental CT software program was instrumental in delineating the relationship between the bone defects and the root apices.     

Different HPV16 E6/E7 oncogene expression patterns in epithelia reconstructed from HPV16-immortalized human endocervical cells and genital keratinocytes

Human papillomavirus type 16 (HPV16) E6/E7 oncogenes immortalize two types of human genital epithelial cells in vitro, endocervical cells and ectocervical or foreskin keratinocytes. Epithelia reconstructed in in vivo nude mouse implants or in vitro organotypic raft cultures from immortalized endocervical cells form higher grade dysplasia than those from keratinocytes. Here, we compared viral E6/E7 mRNA expression in immortalized cell lines of the three cell types using implants, rafts and in situ hybridization assays. Endocervical cells expressed E6/E7 throughout their reconstructed epithelia. In contrast, oncogenes were limited to basal cells for keratinocyte lower grade dysplasias. To study the role of the HPV16 promoter/enhancer in this repression in the upper layers of keratinocyte epithelia, new cell lines were established by immortalization with E6/E7 controlled by the SV40 promoter. The oncogenes were shown to be controlled from the SV40 elements after immortalization. Nevertheless, E6/E7 in the two cell types had the same cell-specific expression pattern as that controlled from the homologous HPV16 promoter. In addition, naturally occurring premalignant lesions having integrated HPV16 DNA expressed E6/E7 extensively in the high-grade dysplastic region of undifferentiated metaplasia. On the other hand, oncogene expression was restricted to lower layers in the lower grade dysplastic region of more mature differentiation. Our data suggest that keratinocytes have an inherent HPV16 promoter-nonspecific mechanism of repression. Apparently this mechanism, which can be acquired during maturation, is initially nonfunctional in in vitro and in vivo epithelia derived from metaplastic endocervical cells.     

Aesthetic outcome of breast implant removal in 85 consecutive patients

As we began to see increasing numbers of women concerned about their gel-filled breast implants, we became aware that we could not advise them with any degree of confidence what they might expect in terms of aesthetic result after implant removal. We decided to review the records and outcomes over a 2-year period of a number of patients who underwent implant removal. Eighty-five consecutive patients were reviewed, 69 of whom had undergone cosmetic augmentation and 16 of whom had breast reconstruction with silicone gel implant(s). Thirty-nine of the 69 cosmetic augmentation patients had removal of implants alone, and 27 had removal accompanied by mastopexy. Three had reaugmentation with saline-filled implants; one had replacement with saline-filled implants. Fifteen of the 16 reconstruction patients underwent autogenous tissue transfer. Preoperative and postoperative photographs of all patients were mixed randomly and rated by two independent raters in four aesthetic categories on a five-point scoring system. Repeatability was measured several weeks later, when each rater scored randomly selected photographs from this patient pool. The patients also performed their own outcome evaluations by means of questionnaire. We discovered that cosmetic augmentation patients who undergo implant removal only often suffer adverse aesthetic results. The postremoval appearance of many cosmetic augmentation patients actually will be improved over their preoperative appearance when mastopexy is performed in conjunction with implant removal. The study demonstrated that patients with certain body types could expect a particular outcome; i.e., women with asthenic builds and older patients with lax, striated breast skin generally had unsatisfactory aesthetic outcomes with implant removal only. Patients selected for autogenous breast reconstruction had favorable results, with extended latissimus dorsi and TRAM flaps yielding equally good outcomes. The study allows us to offer patients an optimistic view of postoperative results following breast implant removal. We have begun to advise selected patients that implant removal accompanied by mastopexy provides a more pleasing aesthetic outcome than implant removal alone.     

Analysis of the radiobiology of ytterbium-169 and iodine-125 permanent brachytherapy implants

Recently, Yb-169 has been considered as a potential replacement for I-125 and Pd-103 in permanent implants. In spite of the uncertainties in the parameters necessary for an accurate radiobiological modelling, the linear quadratic model can be useful in the comparative evaluation of the radiotherapeutic merit of similar implants. In order to find out if a Yb-169 permanent implant can be made biologically 'equivalent' to an I-125 implant, we studied the dependence of local control on the tumour cell radiosensitivity and on the balance between the rate of tumour cell killing and tumour cell proliferation, for rapidly and slowly proliferating tumours. The extrapolated response dose (ERD) has been calculated for tumour and late reacting normal tissue for both types of implants and the possible biological restrictions due to the normal tissue tolerance have been discussed. Our theoretical analysis is consistent with the clinical results published for I-125 permanent implants in prostate tumours and meningiomas. It predicts that Yb-169, which has only recently been used in human tumours, can provide comparable tumour control for permanent implants in slowly proliferating tumours with an initial dose rate of 13 cGy h-1. Control might be extended to rapidly proliferating tumours by increasing the initial dose rate within a range consistent with an acceptable level of normal tissue late reaction.     

A new animal model for molecular biological analysis of the implant-tissue interface: spatial expression of type XII collagen mRNA around a titanium oral implant

The objective of this study was to develop an animal model to investigate the molecular biological healing events at the tissue-implant surface occurring in the alveolar bone. Newly designed mini-titanium implants (2mm in length and 1 mm in diameter) were placed in the maxilla of retired-breeder male Sprague-Dawley rats. The implants were placed in freshly drilled holes in the maxillary bone, or in an area close to the roots of the maxillary first molar. The healing phase in each group was studied histologically at 28 days and at 56 days by means of non-decalcified polymethylmethacrylate-embedded sections and decalcified paraffin-embedded sections. Initial osseointegration was observed at 28 days, with mature osseointegration seen at 56 days. Specimens with implants placed immediately adjacent to the root showed fibrous healing at the implant-tissue surface. As a pilot study, the expression of type XII collagen, a molecular marker specific to the mature periodontal ligament (PDL), was studied by in situ hybridization. There was an absence of type XII expression close to the implant surface, whereas there was a zone of type XII collagen expression closest to the bony wall. Our preliminary results indicated a significant molecular variation in the fibrous-implant interface. This model will be useful in studies of the wound-healing patterns of the extracellular matrix around oral implants specifically relevant to alveolar bone osseointegration and potential formation of PDL.     

Orthopedic ward policy in introduction of new types of total hip implants

The use of different types of total hip implants in medical centers in Israel was surveyed. Questionnaires were sent to all orthopedic ward directors in Israel requesting information on the number of total hip arthroplasties performed between the years 1984-1993, the types of implants used, and whether attending physicians or residents perform the operations. 22 of 24 orthopedic wards responded but 1 ward was excluded because only the results for 1993 were reported. 5 wards reported more and 16 fewer than 50 operations a year. 15 different types of implants were in use in Israel in that period, and in 5 wards 5 or more types of implants were used. Only 1 of the wards performed more than 50 operations a year. We conclude that the indiscriminate use of multiple technologies in wards performing few operations can lead to the long "learning curves" previously associated with poor results. Orthopedic surgeons should resist the impulse to introduce new implants, thus improving results and lowering expenditure. The need for regulating the introduction of new implants is emphasized.     

Acute respiratory distress syndrome in children

In 1991, the Dental Implant Clinical Research Group initiated a long-term clinical study in cooperation with the Department of Veterans Affairs to investigate the influence of implant design, application, and site of placement on clinical performance and crestal bone height. As part of this investigation, Periotest values for 2,212 root from implants were determined at second-stage surgery and during a 24-month follow-up period. Mean Periotest values decreased for implants placed in quality 1 and 2 bone, did not change for implants in quality 3 bone, and increased for implants in quality 4 bone. Implants in the posterior maxilla and single implants in the anterior maxilla had increasing mean Periotest values as compared with decreasing values for implants in other regions. Mean Periotest values for uncoated implants decreased gradually to approach those of hydroxyapatite-coated implants.     

Influence of implant location on the mechanical characteristics using the transcortical model

Mechanical evaluation of implants harvested following surgical implantation is often performed as part of the screening process for new materials or surface textures. The question of randomization with respect to implant placement often arises when attempting to design a study to evaluate several implant types, while minimizing the number of animals required to perform the investigation. The purpose of this study was to analyze the effects of implant placement within the canine femur on mechanical characteristics of the bone-implant interface when using the transcortical model. Both smooth and porous-surfaced implants were evaluated at several time periods to determine the effects of placement in the medial versus left cortex, proximal versus distal placement, and left versus right femur. The smooth-surfaced implants demonstrated a significant effect due to proximal versus distal placement within the femur only. There were no other significant comparisons. Porous-surfaced implants demonstrated no significant effects due to placement within the femur. The results demonstrate the necessity for careful study design when evaluating smooth surfaced implants; however, paired comparisons in either the medial versus lateral cortex or left versus right femur will provide unbiased comparisons between the implants.     

Effect of the tripeptide glycyl-L-histidyl-L-lysine on the proliferation and synthetic activity of chick embryo chondrocytes

Under certain conditions chondrocytes form lattices with cartilage collagens, which may serve as cartilage implants. It is necessary to find the optimal conditions for culturing chondrocytes. Three different supports are compared: (a) plastic; (b) cartilage collagens; and (c) insoluble skin collagen solubilized under denaturing conditions (ISC-40). The effect of culture medium supplementation with the tripeptide (Gly-His-Lys)2.Cu.2H2O.2NaCl (GHK) on chondrocyte proliferation and synthetic activity is studied, with particular attention paid to collagen types I, II and III. The collagen supports stimulated chondrocyte proliferation, but on the ISC-40 support they started to dedifferentiate rather early. In the primary culture, chondrocytes on all three supports synthesized mainly collagen type II, and only small amounts of types I and III. In the first passage the synthesis of these two collagen types increased, relative to collagen type II, at least on the cartilage collagen support. Supplementation of culture medium with GHK stimulated chondrocyte proliferation in the primary structure mostly on the ISC-40 support. On the other two types of supports the stimulatory effect of GHK was expressed mostly in the first passages. The collagen synthetic rate was increased by GHK on both of the collagen supports; on the cartilage collagen support collagen type II was synthesized predominantly and on the ISC-40 support types I and III were mostly formed. It is suggested that supplementation of culture medium with GHK may be useful in the preparation of cartilage implants.     

Mechanical and histological fixation of hydroxylapatite-coated pyrolytic carbon and titanium alloy implants: a report of short-term results

Historically, pyrolytic carbon has been a material for cardiovascular applications, but it has several properties suited for orthopedic uses as well. Pyrolytic carbon has an elastic modulus similar to bone and is highly fatigue resistant, but has not been used in orthopedics because of poor fixation to bone. Plasma sprayed hydroxylapatite (HA) has significantly improved the bonding of bone to titanium alloy implants. The effect of plasma-sprayed HA on pyrolytic carbon implants was investigated in this study. Cylindrical samples were implanted through a single cortex in Beagle femurs. The animals were sacrificed after 8 weeks, and a mechanical push-out test was performed on the implants immediately after explantation. Samples were microradiographed, stained for histology, and examined histomorphometrically. Interface strength for each type of implant was calculated. Pyrolytic carbon showed almost no attachment strength with an average strength value of 1.59 MPa. HA-coated pyrolytic carbon (8.71 MPa) yielded the same interfacial strength as HA-coated titanium (8.71 MPa). Histology revealed that bone was in direct apposition to all implants, both HA coated and noncoated. Failures occurred between the core material and the coating, or within the coating, but not at the bone/HA interface. Histomorphometry results confirmed that the two types of HA-coated implants had more bone apposition than the uncoated pyrolytic carbon implants. It was concluded that a plasma sprayed HA coating significantly improves the bone fixation of pyrolytic carbon.     

Mastication forces and implant-bearing surface

This article discusses the shift of emphasis in implantology from the phenomenon of osseointegration of implants to the accurate fabrication of the prosthesis, recognizing the implant/prosthesis unit as an actual replica rather than a replacement of the missing tooth. The study of kinetics with its succession of mandibular cycles is used to discuss the integration of mastication and occlusion. The importance of periimplant ligament in natural teeth is discussed, along with the impact of its absence on implant mobility. The impact of the bone types and the root surface architecture on the implant-bearing surface is presented along with the stress of the mastication forces. All these factors have to be considered in the treatment planning and effectively communicated to the laboratory. The learning objective of this article is to provide updated information in those areas for the reader.     

A comparison of cytogenetic studies and flow cytometry in breast carcinomas

The increased use of DNA-based typing techniques has improved the accuracy and reliability of HLA types assigned to patients requiring an allogeneic bone marrow transplant and their potential donors, facilitating better donor selection. The benefits of this technology, which will completely replace serologic typing within the next few years, have not yet been fully exploited since the typing information obtained in the form of DNA sequence polymorphisms is presently converted to an HLA allelic type for submission to a registry. Furthermore, within the registry, the allelic type may be further converted to a serologic antigen for use in the search and match process. Because the current nomenclature system makes selection of donors who are likely to provide optimal matches difficult, it is critical that DNA-based HLA typing data be recorded by registries as sequence polymorphisms tested as positive or negative rather than interpreted HLA types and that searching and matching utilize these polymorphisms. Until this transition is complete, we will not fully utilize this powerful HLA typing technology to best serve those patients seeking unrelated donors.