A review on biomass‐based hydrogen production and potential applications

In this paper, a detailed review is presented to discuss biomass‐based hydrogen production systems and their applications. Some optimum hydrogen production and operating conditions are studied through a comprehensive sensitivity analysis on the hydrogen yield from steam biomass gasification. In addition, a hybrid system, which combines a biomass‐based hydrogen production system and a solid oxide fuel cell unit is considered for performance assessment. A comparative thermodynamic study also is undertaken to investigate various operational aspects through energy and exergy efficiencies. The results of this study show that there are various key parameters affecting the hydrogen production process and system performance. They also indicate that it is possible to increase the hydrogen yield from 70 to 107 g H₂ per kg of sawdust wood. By studying the energy and exergy efficiencies, the performance assessment shows the potential to produce hydrogen from steam biomass gasification. The study further reveals a strong potential of this system as it utilizes steam biomass gasification for hydrogen production. To evaluate the system performance, the efficiencies are calculated at particular pressures, temperatures, current densities, and fuel utilization factors. It is found that there is a strong potential in the gasification temperature range 1023–1423 K to increase energy efficiency with a hydrogen yield from 45 to 55% and the exergy efficiency with hydrogen yield from 22 to 32%, respectively, whereas the exergy efficiency of electricity production decreases from 56 to 49.4%. Hydrogen production by steam sawdust gasification appears to be an ultimate option for hydrogen production based on the parametric studies and performance assessments that were carried out through energy and exergy efficiencies. Finally, the system integration is an attractive option for better performance. Copyright © 2012 John Wiley & Sons, Ltd.     

Biomass-based hydrogen production: A review and analysis

In this study, various processes for conversion of biomass into hydrogen gas are comprehensively reviewed in terms of two main groups, namely (i) thermo-chemical processes (pyrolysis, conventional gasification, supercritical water gasification (SCWG)), and (ii) biological conversions (fermentative hydrogen production, photosynthesis, biological water gas shift reactions (BWGS)). Biomass-based hydrogen production systems are discussed in terms of their energetic and exergetic aspects. Literature studies and potential methods are then summarized for comparison purposes. In addition, a biomass gasification process via oxygen and steam in a downdraft gasifier is exergetically studied for performance assessment as a case study. The operating conditions and strategies are really important for better performance of the system for hydrogen production. A distinct range of temperatures and pressures is used, such as that the temperatures may vary from 480 to 1400 °C, while the pressures are in the range of 0.1–50 MPa in various thermo-chemical processes reviewed. For the operating conditions considered the data for steam biomass ratio (SBR) and equivalence ratio (ER) range from 0.6 to 10 and 0.1 to 0.4, respectively. In the study considered, steam is used as the gasifying agent with a product gas heating value of about 10–15 MJ/Nm³, compared to an air gasification of biomass process with 3–6 MJ/Nm³. The exergy efficiency value for the case study system is calculated to be 56.8%, while irreversibility and improvement potential rates are found to be 670.43 and 288.28 kW, respectively. Also, exergetic fuel and product rates of the downdraft gasifier are calculated as 1572.08 and 901.64 kW, while fuel depletion and productivity lack ratios are 43% and 74.3%, respectively.     

Efficiency assessment of an integrated gasifier/boiler system for hydrogen production with different biomass types

In this study, we utilize some experimental data taken from the literature, especially on the air-blown gasification characteristics of six different biomass fuels, namely almond shell (ASF), walnut pruning (WPF), rice straw (RSF), whole tree wood chips (WWF), sludge (SLF) and non-recyclable waste paper (NPF) in order to study the thermodynamic performance of an integrated gasifier–boiler power system for its hydrogen production. In this regard, both energy and exergy efficiencies of the system are investigated. The exergy contents of different biomass fuels are calculated to be ranging from 15.89 to 22.07 MJ/kg, respectively. The hydrogen concentrations based on the stack gases at the cyclone exit are determined to be between 7 and 18 (%v/v) for NPF and ASF. Also, percentages of combustible vary from 30% to 46%. The stack gas has physical and chemical exergies. The total specific exergy rates are calculated and illustrated. These values change from 3.54 to 6.41 MJ/kg. Then, two types of exergy efficiencies are calculated, such as that exergy efficiency 1 is examined via all system powers, exergy and efficiency 2 is calculated according to specific exergy rates of biomass fuels and product gases. While the exergy efficiencies 1 change between 4.33% and 11.89%, exergy efficiencies 2 vary from 18.33% to 39.64%. Also, irreversibilities range from 9.76 to 18.02 MJ/kg. Finally, we investigate how nitrogen contents of biomass fuels affect on energy and exergy efficiencies. The SLF has the highest amount of nitrogen content as 5.64% db while the NPF has the lowest one as 0.14% db. The minimum and maximum exergetic efficiencies belong to the same fuels. Obviously, the higher the nitrogen content the lower the efficiency based on an inverse ratio between exergy efficiency and nitrogen content.     

Exergoeconomic analysis of a hybrid system based on steam biomass gasification products for hydrogen production

In this paper, a conceptual hybrid biomass gasification system is developed to produce hydrogen and is exergoeconomically analyzed. The system is based on steam biomass gasification with the lumped solid oxide fuel cell (SOFC) and solid oxide electrolyser cell (SOEC) subsystem as the core components. The gasifier gasifies sawdust in a steam medium and operates at a temperature range of 1023-1423 K and near atmospheric pressure. The analysis is conducted for a specific steam biomass ratio of 0.8 kmol-steam/kmol-biomass. The gasification process is assumed to be self-thermally standing. The pressurized SOFC and SOEC are of planar types and operate at 1000 K and 1.2 bar. The system can produce multi-outputs, such as hydrogen (with a production capacity range of 21.8-25.2 kgh⁻¹), power and heat. The internal hydrogen consumption in the lumped SOFC-SOEC subsystem increases from 8.1 to 8.6 kg/h. The SOFC performs an efficiency of 50.3% and utilizes the hydrogen produced from the steam that decomposes in the SOEC. The exergoeconomic analysis is performed to investigate and describe the exergetic and economic interactions between the system components through calculations of the unit exergy cost of the process streams. It obtains a set of cost balance equations belonging to an exergy flow with material streams to and from the components which constitute the system. Solving the developed cost balance equations provides the cost values of the exergy streams. For the gasification temperature range and the electricity cost of 0.1046 $/kWh considered, the unit exergy cost of hydrogen ranges from 0.258 to 0.211 $/kWh.     

Thermo-economic process model for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass

A detailed thermo-economic model considering different technological alternatives for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass is presented. First, candidate technology for processes based on biomass gasification and subsequent methanation is discussed and assembled in a general superstructure. Both energetic and economic models for biomass drying with air or steam, thermal pretreatment by torrefaction or pyrolysis, indirectly and directly heated gasification, methane synthesis and carbon dioxide removal by physical absorption, pressure swing adsorption and polymeric membranes are then developed. Performance computations for the different process steps and some exemplary technology scenarios of integrated plants are carried out, and overall energy and exergy efficiencies in the range of 69–76% and 63–69%, respectively, are assessed. For these scenarios, the production cost of SNG including the investment depreciation is estimated to 76–107 € MWh⁻¹_SNG for a plant capacity of 20 MW_th,biomass, whereas 59–97 € MWh⁻¹_SNG might be reached at scales of 150 MW_th,biomass and above. Based on this work, a future thermo-economic optimisation will allow for determining the most promising options for the polygeneration of fuel, power and heat.     

Sustainable hydrogen production options and the role of IAHE

In this paper, some potential sustainable hydrogen production options are identified and discussed. There are natural resources from which hydrogen can be extracted such as water, fossil hydrocarbons, biomass and hydrogen sulphide. In addition, hydrogen can be extracted from a large palette of anthropogenic wastes starting with biomass residuals, municipal wastes, plastics, sewage waters etc. In order to extract hydrogen from these resources one needs to use sustainable energy sources like renewables and nuclear. A total of 24 options for sustainable hydrogen production are then identified. Sustainable water splitting is the most important method of hydrogen production. Five sustainable options are discussed to split water, which include electrolysis, high temperature electrolysis, pure and hybrid thermochemical cycles, and photochemical/radiochemical methods. Other 19 methods refer to extraction of hydrogen from other materials than water or in conjunction with water (e.g., coal gasification with CO₂ capture and sequestration). For each case the achievable energy and exergy efficiency of the method were estimated based on state of the art literature screening for each involved process. In addition, a range of hydrogen production capacity is determined for each of the option. For a transition period to hydrogen economy nuclear or solar assisted coal gasification and fossil fuel reforming technologies – with efficiencies of 10–55% including CO₂ sequestration – should be considered as a viable option. Other “ready to be implemented” technology is hydro-power coupled to alkaline electrolysers which shows the highest hydrogen generation efficiency amongst all electrical driven options with 60–65%. Next generation nuclear reactors as to be coupled with thermochemical cycles have the potential to generate hydrogen with 40–43% energy efficiency (based on LHV of hydrogen) and 35–37% exergy efficiency (based on chemical exergy of hydrogen). Furthermore, recycling anthropogenic waste, including waste heat, waste plastic materials, waste biomass and sewage waters, shows also good potential as a sustainable option for hydrogen production. Biomass conversion to hydrogen is found as potentially the most efficient amongst all studied options in this paper with up to 70% energy efficiency and 65% exergy efficiency.     

Exergoeconomic and thermodynamic analyses of an externally fired combined cycle with hydrogen production and injection to the combustion chamber

A hydrogen production unit is successfully integrated with an externally fired combined cycle using biomass fuel. The hydrogen produced in an electrolyzer can be used for other purposes, but when there is temporarily no market for it is injected into the combustion chamber of an externally fired combined cycle. Injecting hydrogen into the combustion chamber was found to reduce fuel consumption by almost 27%. Moreover, hydrogen injection decreased the energy efficiency and exergy efficiency by 45%, and decreased both the exergy loss and exergy destruction rates. Meanwhile, CO₂ emissions decreased by 32%. However, there are some disadvantages to hydrogen injection, especially from the viewpoint of exergoeconomics. The total unit product cost for the externally fired combined cycle with hydrogen injection is almost 27% more than the unit without hydrogen injection, although the exergy loss and destruction costs decreased with hydrogen injection. The value of the relative cost difference with hydrogen injection rises by 40%. Also the exergoeconomic assessment demonstrates that the cost of components (purchase and maintenance) are higher than cost of components' exergy destruction for both cycles, i.e., with and without hydrogen injection. As the compressor pressure ratio increases, optimal points are identified for biomass flow rate, energy and exergy efficiencies, exergy destruction and loss rates, exergy destruction and loss exergy cost rates, total unit product cost and relative cost difference.     

Energy and exergy analysis and optimization of biomass gasification process for hydrogen production (based on air,steam and air/steam gasifying agents)

Growing the consumption of fossil fuels and emerging global warming issue have driven the research interests toward renewable and environmentally friendly energy sources. Biomass gasification is identified as an efficient technology to produce sustainable hydrogen. In this work, energy and exergy analysis coupled with thermodynamic equilibrium model were implemented in biomass gasification process for production of hydrogen. In this regard, a detailed comparison of the performance of a downdraft gasifier was implemented using air, steam, and air/steam as the gasifying agents for horse manure, pinewood and sawdust as the biomass materials. The comparison results indicate that the steam gasification of pinewood generates a more desired product gas compositions with a much higher hydrogen exergy efficiency and low exergy values of unreacted carbon and irreversibility. Then the effects of the inherent operating factors were investigated and optimized applying a response surface methodology to maximize hydrogen exergy efficiency of the process. A hydrogen exergy efficiency of 44% was obtained when the product gas exergy efficiency reaches to the highest value (88.26%) and destruction and unreacted carbon efficiencies exhibit minimum values of 7.96% and 1.9%.     

Exergoeconomic assessment of a biomass-based hydrogen,electricity and freshwater production cycle combined with an electrolyzer,steam turbine and a thermal desalination process

Since biomass resources can be found with different contents in most regions of the world, biomass/gasification (Biog) coupling processes can be considered as an attractive and useful technology for integrating in polygeneration configurations. In this regard, a new polygeneration energy configuration based on Biog process is proposed and its conceptual analysis is presented. In the new energy process, a Rankine cycle, a water electrolysis cycle (based on solid oxide electrolyzer, SOE), and a multi-effect desalination (MED) unit are embedded to generate electricity, hydrogen fuel, and freshwater, respectively. The considered polygeneration configuration is comprehensively investigated and discussed utilizing a parametric evaluation and from thermodynamic, energetic and exergoeconomic points of view. Relying on the proposed system can provide a new approach to produce carbon-free hydrogen fuel and freshwater in order to achieve an efficient, modern and green polygeneration configuration. The results indicated that the electrical power generated by the considered polygeneration configuration is close to 1735 kW. In addition, the system is capable of producing almost 9880 kg/h of freshwater and 12.3 kg/h of hydrogen. In such a context, the energy efficiency and total products unit exergy cost were 36.4% and 16.6 USD/GJ, respectively. Also, the system could achieve an exergy efficiency of nearly 17.1%. Moreover, about 8.9 MW of process's exergy is destroyed. The performance of the proposed polygeneration configuration using four different biomass fuels is compared. It was determined that the total products unit exergy costs under paddy husk and paper biomass are approximately 14.8% and 8.6% higher than MSW, respectively.     

Exergy analysis of hydrogen production plants based on biomass gasification

Biomass gasification is a promising option for the sustainable production of hydrogen rich gas. Five different commercial or pilot scale gasification systems are considered for the design of a hydrogen production plant that generates almost pure hydrogen. For each of the gasification technique models of two different hydrogen production plants are developed in Cycle-Tempo: one plant with low temperature gas cleaning (LTGC) and the other with high temperature gas cleaning (HTGC). The thermal input of all plants is 10 MW of biomass with the same dry composition. An exergy analysis of all processes has been made. The processes are compared on their thermodynamic performance (hydrogen yield and exergy efficiency). Since the heat recovery is not incorporated in the models, two efficiencies are calculated. The first one is calculated for the case that all residual heat can be applied, the case with ideal heat recovery, and the other is calculated for the case without heat recovery. It is expected that in real systems only a part of the residual heat can be used. Therefore, the actual value will be in between these calculated values. It was found that three processes have almost the same performance: The Battelle gasification process with LTGC, the FICFB gasification process with LTGC, and the Blaue Turm gasification process with HTGC. All systems include further processing of the cleaned gas from biomass gasification into almost pure hydrogen. The calculated exergy efficiencies are, respectively, 50.69%, 45.95%, and 50.52% for the systems without heat recovery. The exergy efficiencies of the systems with heat recovery are, respectively, 62.79%, 64.41%, and 66.31%. The calculated hydrogen yields of the three processes do not differ very much. The hydrogen yield of the Battelle LTGC process appeared to be 0.097 kg (kg_{(dry biomass)})⁻¹, for the FICFB LTGC process a yield of 0.096 kg (kg_{(dry biomass)})⁻¹ was found, and for the Blaue Turm HTGC 0.106 kg (kg_{(dry biomass)})⁻¹.     

Exergy analysis of hydrogen production from steam gasification of biomass: A review

Exergy analysis of hydrogen production from steam gasification of biomass was reviewed in this study. The effects of the main parameters (biomass characteristics, particle size, gasification temperature, steam/biomass ratio, steam flow rate, reaction catalyst, and residence time) on the exergy efficiency were presented and discussed. The results show that the exergy efficiency of hydrogen production from steam gasification of biomass is mainly determined by the H₂ yield and the chemical exergy of biomass. Increases in gasification temperatures improve the exergy efficiency whereas increases in particle sizes generally decrease the exergy efficiency. Generally, both steam/biomass ratio and steam flow rate initially increases and finally decreases the exergy efficiency. A reaction catalyst may have positive, negative or negligible effect on the exergy efficiency, whereas residence time generally has slight effect on the exergy efficiency.     

Development and thermodynamic assessment of a novel solar and biomass energy based integrated plant for liquid hydrogen production

In this paper, a combined power plant based on the dish collector and biomass gasifier has been designed to produce liquefied hydrogen and beneficial outputs. The proposed solar and biomass energy based combined power system consists of seven different subplants, such as solar power process, biomass gasification plant, gas turbine cycle, hydrogen generation and liquefaction system, Kalina cycle, organic Rankine cycle, and single-effect absorption plant with ejector. The main useful outputs from the combined plant include power, liquid hydrogen, heating-cooling, and hot water. To evaluate the efficiency of integrated solar energy plant, energetic and exergetic effectiveness of both the whole plant and the sub-plants are performed. For this solar and biomass gasification based combined plant, the generation rates for useful outputs covering the total electricity, cooling, heating and hydrogen, and hot water are obtained as nearly 3.9 MW, 6584 kW, 4206 kW, and 0.087 kg/s in the base design situations. The energy and exergy performances of the whole system are calculated as 51.93% and 47.14%. Also, the functional exergy of the whole system is calculated as 9.18% for the base working parameters. In addition to calculating thermodynamic efficiencies, a parametric plant is conducted to examine the impacts of reference temperature, solar radiation intensity, gasifier temperature, combustion temperature, compression ratio of Brayton cycle, inlet temperature of separator 2, organic Rankine cycle turbine and pump input temperature, and gas turbine input temperature on the combined plant performance.     

Design and thermodynamic assessment of a biomass gasification plant integrated with Brayton cycle and solid oxide steam electrolyzer for compressed hydrogen production

In this paper, a comprehensive thermodynamic evaluation of an integrated plant with biomass is investigated, according to thermodynamic laws. The modeled multi-generation plant works with biogas produced from demolition wood biomass. The plant mainly consists of a biomass gasifier cycle, clean water production system, hydrogen production, hydrogen compression, gas turbine sub-plant, and Rankine cycle. The useful outputs of this plant are hydrogen, electricity, heating and clean water. The hydrogen generation is obtained from high-temperature steam electrolyzer sub-plant. Moreover, the membrane distillation unit is used for freshwater production, and also, the hydrogen compression unit with two compressors is used for compressed hydrogen storage. On the other hand, energy and exergy analyses, as well as irreversibilities, are examined according to various factors for examining the efficiency of the examined integrated plant and sub-plants. The results demonstrate that the total energy and exergy efficiencies of the designed plant are determined as 52.84% and 46.59%. Furthermore, the whole irreversibility rate of the designed cycle is to be 37,743 kW, and the highest irreversibility rate is determined in the biomass gasification unit with 12,685 kW.     

A super-efficient method for hydrogen production from seawater

A hybrid system to produce hydrogen from the seawater is proposed and the best condition of that to have the highest efficiency is found here. The hybrid system consists of parabolic trough collectors, reverse osmosis (RO) desalination system, and a thermochemical water decomposition unit with heat dissipation system by cooling towers. The main process is based on the cuprous chloride (five-step) cycle that is optimized compared to previous research works. The RO and Cu–Cl processes are simulated by ROZA and Aspen HYSYS software programs, respectively, which are linked to the developed MATLAB codes for other components. The optimum area of the parabolic trough collectors is found 2964.6 m². Furthermore, the foremost dimensions for two cooling towers are 40 and 20 m height, and 50 and 35 m base diameter, respectively. Additionally, according to the results, the proposed hybrid system enjoys a high level of both energy and exergy efficiency values at the same time. The total energy efficiency of the hybrid H₂ production system is 18%, while it has the exergy efficiency of 30%.     

Decentralized generation of electricity from biomass with proton exchange membrane fuel cell

Biomass can be applied as the primary source for the production of hydrogen in the future. The biomass is converted in an atmospheric fluidized bed gasification process using steam as the gasifying agent. The producer gas needs further cleaning and processing before the hydrogen can be converted in a fuel cell; it is assumed that the gas cleaning processes are able to meet the requirements for a PEM-FC. The compressed hydrogen is supplied to a hydrogen grid and can be used in small-scale decentralized CHP units. In this study it is assumed that the CHP units are based on low temperature PEM fuel cells. For the evaluation of alternative technologies the whole chain of centralized hydrogen production from biomass up to and including decentralized electricity production in PEM fuel cells is considered.Two models for the production of hydrogen from biomass and three models for the combined production of electricity and heat with PEM fuel cells are built using the computer program Cycle-Tempo. Two different levels of hydrogen purity are considered in this evaluation: 60% and 99.99% pure hydrogen. The purity of the hydrogen affects both the efficiencies of the hydrogen production as well as the PEM-FC systems. The electrical exergy efficiency of the PEM-FC system without additional heat production is calculated to be 27.66% in the case of 60% hydrogen and 29.06% in the case of 99.99% pure hydrogen. The electrical exergy efficiencies of the whole conversion chain appear to be 21.68% and 18.74%, respectively. The high losses during purification of the hydrogen gas result in a higher efficiency for the case with low purity hydrogen. The removal of the last impurities strongly increases the overall exergy losses of the conversion chain.     

Performance analysis and exergoeconomic assessment of a proton exchange membrane compressor for electrochemical hydrogen storage

Electrochemical hydrogen compression (EHC) is a promising alternative to conventional compressors for hydrogen storage at high pressure, because it has a simple structure, low cost of hydrogen delivery, and high efficiency. In this study, the performance of an EHC is evaluated using a three-dimensional numerical model and finite volume method. The results of numerical analysis for a single cell of EHC are extended to a full stack of EHC. In addition, exergy and exergoeconomic analyses are carried out based on the numerical data. The effects of operating temperature, pressure, and gas diffusion layer (GDL) thickness on the energy and exergy efficiencies and the exergy cost of hydrogen are examined. The motivation of this study is to examine the performance of the EHC at different working conditions and also to determine the exergy cost of hydrogen. The results reveal that the energy and exergy efficiency of EHC stack improve by almost 3.1% when operating temperature increases from 363 K to 393 K and the exergy cost of hydrogen decreases by 0.5% at current density of 5000 A m⁻². It is concluded that energy and exergy efficiency of EHC stack decrease by 25% and 5.4% when the cathode pressure increases from 1 bar to 30 bar, respectively. Moreover, it is realized that the GDL thickness has a considerable effect on the EHC performance. The exergy cost of hydrogen decreases by 53% when the GDL thickness decreases from 0.5 mm to 0.2 mm at current density of 5000 A m⁻².     

A methanol autothermal reforming system for the enhanced hydrogen production: Process simulation and thermodynamic optimization

Methanol autothermal reforming is a potential way to produce hydrogen that can be used for vehicle power batteries like PEMFC. Combining a reformer with a combustor to produce substantial hydrogen is promising, but the challenge of heat transfer efficiency between the reformer and combustor must be considered. Furthermore, the complexity of the system structure is not conducive to its large-scale operation level. In this paper, a novel methanol autothermal reforming hydrogen production system without catalytic combustion was built and developed, aiming to produce hydrogen-rich gas with low CO concentration. Process simulation and thermodynamic optimization on the target system were detailedly performed using Aspen Plus software and parameter sensitivity analysis methods. In addition, a methanol autothermal reforming hydrogen production system using catalytic combustion was taken as the reference system. The results indicated that the novel system could achieve a self-sustaining operation by the coupled methanol partial oxidation and steam reforming. And the product gas contained very low CO concentration (<10 ppm) due to the combined effects of water-gas shifting and CO preferential oxidation reactions. It was verified that under the maximal exergy efficiency condition, the exergy efficiency of the novel system is not significantly improved compared with the reference system, but the hydrogen yield is increased by about 27.65%, the thermal efficiency is increased by about 17.51%, and the exergy loss when generating unit molar H₂ is reduced by 20.53 kJ/mol; Under the condition of maximum hydrogen yield, the indicators of the novel system also perform better. Notably, the reformer is the main exergy loss source in the novel system, which provides a theoretical basis for further optimization of parameter configuration. This work will be beneficial to researchers who study the miniaturization design of the integrated system of methanol hydrogen production coupled vehicle power battery.     

A novel process simulation model for hydrogen production via reforming of biomass gasification tar

Process modeling and simulation are very important for new designs and estimation of operating variables. This study describes a new process for the production of hydrogen from lignocellulosic biomass gasification tars. The main focus of this research is to increase hydrogen production and improve the overall energy efficiency of the process. In this study, Aspen HYSYS software was used for simulation. The integration structure presented in this research includes sections like tar reforming and ash separation (Ash), combined heat and power cycle (CHP), hydrogen sulfide removal unit (HRU), water-gas shift (WGS) reactor, and gas compression as well as hydrogen separation from a mixture of gases in pressure swing adsorption (PSA). It was found that the addition of CHP cycle and the use of the plug flow reactor (PFR) model, firstly, increased the overall energy efficiency of the process by 63% compared to 29.2% of the base process. Secondly it increased the amount of hydrogen production by 0.518 kmol (H2)/kmol Tar as compared with 0.475 of the base process. Process analysis also demonstrated that the integrated process of hydrogen production from biomass gasification tars is carbon neutral.     

Biomass-based hydrogen for oil refining: Integration and performances of two gasification concepts

In this work, two biomass-to-hydrogen concepts are designed and their integration with a large European refinery is investigated. One concept is based on indirect, atmospheric steam gasification while the second is based on pressurized direct oxygen-steam-blown gasification. The technologies chosen for gas cleaning, upgrading and hydrogen separation also differ in the two concepts. Heat integration and poly-generation opportunities are identified by means of process integration tools and four system configurations are identified. These are compared in terms of energy and exergy performances and potential for reduction of fossil CO₂ emissions at the refinery. It is found that the performance of the biomass-to-hydrogen concepts can be improved by up to 11% points in energy efficiency and 9% points in exergy efficiency. The design based on indirect gasification appears the most efficient according to both energy and exergy efficiencies. All configurations yield potential significant reductions of fossil CO₂ emissions at the refinery.     

Exergetic efficiency and options for improving sewage sludge gasification in supercritical water

The present article deals with an exergy analysis of a process under development for the gasification of biomass in supercritical water (supercritical water gasification, SCWG). This process is aimed at generating hydrogen out of the biogenic feedstock sewage sludge. The principle of the process is based on making use of the modifications of specific physical and chemical properties of water above the critical point (T=374°C, p=221 bar). These properties allow for a nearly complete conversion of the organic substance contained in the feed material into energy-rich fuel gases, containing hydrogen, carbon dioxide and methane. Based on a steady-state model of the process, exergy flow rates are calculated for all components and a detailed exergy analysis is performed. From the exergetic variables, options to improve the individual plant components as well as the overall plant are derived. The components with the highest proportion of exergy destruction in the complete process are identified and possibilities of improving them and the complete system in order to increase the overall efficiency are demonstrated. The combustion chamber necessary for heat supply is found to be the component with the highest proportion of exergy destruction of the complete plant. Moreover, the components of air preheater, reactor contribute significantly to the exergy destruction of the complete system. Copyright © 2006 John Wiley & Sons, Ltd.