共查询到20条相似文献,搜索用时 125 毫秒
1.
为提高设计方法适应性,分析了不同工业设计对象的设计条件、特点及差异性,分析了工业设计实践过程对创新意识、范畴、分析、价值、过程等相关系统内容。分列比对各类设计对象的设计主导、参与度和作用的指标,梳理的工业设计导入时机与机会点。从对动态化的设计范畴、共性与差异内容叠加、核心价值区间界定、设计维度拓展几个方面构建了用于不同对象的共性设计方法。为工业设计产品设计提供了分析参考和设计指导。 相似文献
2.
3.
4.
5.
6.
支持工业设计的产品族结构模型研究 总被引:6,自引:0,他引:6
为构建支持工业设计的产品族结构模型,对产品工业设计与工程设计功能进行了对比研究,提出了一种多视图结构模型。该模型包括通用结构视图、控制结构视图和存储结构视图。通用结构视图采用了层次结构和属性表的方法构建,定义了产品族形态的概念结构;控制结构视图由工业设计控制结构元素构成,并与通用结构视图中的结构和元素映射,定义了产品族工业设计变型控制策略;存储结构视图中引入物理部件与逻辑构件、组成关系与引用关系,定义了产品族工业设计信息的组织方式和存储策略。最后,综合三个视图并用手机的产品族设计实例,分析了该模型在设计中的应用。 相似文献
7.
8.
9.
10.
产品设计中的感性意象理论、技术与应用研究进展 总被引:43,自引:1,他引:42
感性意象是工业设计中的一种重要研究方法.通过对国内外相关文献的综述,论述产品设计中感性意象的有关概念,分析感性工学、意象尺度、基于用户知识与设计知识的设计研究等理论体系,探讨感性意象的研究方法、关键技术及其在工业设计中的应用.针对工业设计与信息技术的发展,提出感性意象的研究热点和发展趋势. 相似文献
11.
采用ICP-AES法测定GH3128合金中硅、锰、钨、钼、铬、钛、铝、铁、锆等多种合金元素。系统研究了各元素4条分析谱线的光谱干扰情况,根据光谱干扰研究结果和分析谱线的灵敏度、信背比以及等效离子浓度等进行了分析线的选择。采用柠檬酸络合钨,基体匹配法消除共存元素干扰,效果良好。 相似文献
12.
本文选择了硝酸、王水、逆王水,进行碳钢、低合金钢溶样条件试验,以谱线强度为指标,溶解酸种类、溶解酸浓度、溶解酸用量、定容酸用量等四因素为变化条件,各因素中有三水平,即按正交实验表L_9(3~4)进行试验,编制计算程序,快速、科学地优选出最佳溶样条件—30ml NHO_3(1+5v/v)和3ml HCl,ICP-AES法同时测定铝、砷、铬、钴、铜、磷、锰、钼、镍、硅、锡、钛和钒13种元素。为确定测试方法的重复性(r)和再现性(R)而进行精密度试验。精密度数据是由10个实验室对7个样品作试验确定的。方法的回收率为94%-105%。精密度在8%以内。 相似文献
13.
14.
15.
石油焦中Fe、Ni、V、Na、Si、Ti的ICP-AES测定 总被引:1,自引:0,他引:1
本文提出用ICP-AES法直接测定石油焦中Fe、Ni、V、Na、Si、Ti含量,该测试方法能满足我厂石油焦中金属元素的检测,测定结果的准确度和精密度均满足分析要求。 相似文献
16.
Mott scattering factors are needed for the quantitative interpretation of elastic scattering phenomena in electron spectroscopy and microscopy. The inelastic mean free path of electrons has been deduced from the elastic peak intensity. The theoretical approach is based on the effective elastic cross section derived from the differential elastic cross sections. In the present work they are calculated using the partial wave expansion method, supplying as well the Mott scattering factors. Tabulated data are presented for a number of elements and 500–3000 eV electrons in steps of 2° or 5° of the scattering angle θ. The effective and total elastic scattering cross sections are also presented. 相似文献
17.
18.
19.
《仪器科学与技术》2013,41(4):439-440
ABSTRACT This paper presents some results of experimental research addressing the influence of different thermal insulation fillings on dynamic properties of industrial resistance temperature probes, based on a thin-film platinum resistance temperature detector. The experiments were carried out with four jacket thin-film resistance temperature probes, all having identical protection tube geometry, yet differing in the thermal insulation filling materials. Further, a comparison between transient response characteristics in water established experimentally and those based on simulations with electric–thermal analogy, is given. The results of these analyses can be applied to enhance the dynamic response of temperature measurement made by temperature probes in water. 相似文献