Single‐cell‐gap transflective liquid‐crystal display using double‐ and single‐mode approaches

Abstract— In this paper, many popular methods to study transflective liquid‐crystal‐displays (LCDs) have been discussed, and several new transflective LCD configurations with a single‐cell gap have been proposed. The traditional double‐cell‐gap method gives the best match of the transmittance/reflectance voltage curve (TVC/RVC) and also the widest viewing angle, but also brings the highest fabrication complexity. The single‐cell‐gap transflective LCD is much easier to fabricate and also shows a good match of TVC/RVC. A new methodology has been shown to find optimal configurations for single‐cell‐gap transflective LCDs. New configurations using multimode in a single pixel include twisted nematic (TN) optically compensated bend (OCB), TN electrically controlled birefringence (ECB), and TN low‐twisted nematic (LTN). TN and hybrid‐aligned nematic (HAN) modes have been investigated for single‐mode transflective LCDs. The results exhibit high contrast ratio, a good match of TVC/RVC, as well as wide viewing angle.     

Single‐cell‐gap transflective liquid‐crystal display and the use of photoalignment technology

Abstract— In this paper, transflective liquid‐crystal‐display (LCD) technology will be reviewed, and several new single‐cell‐gap transflective LCD configurations are proposed. Photoalignment technology is studied especially for transflective‐LCD applications. In order to realize the optimal performance of the display as well as a matched transmittance/reflectance voltage curve (TVC/RVC) for the transflective configurations, two different single‐cell‐gap transflective‐LCD approaches will be discussed. The first one is the dual‐mode single‐cell‐gap approach, in which different liquid‐crystal modes are applied to the transmissive and reflective subpixels of the transflective LCD. The other approach is the single‐mode s ingle‐cell‐gap approach, in which an in‐cell retardation film is applied to adjust the performance and TVC/RVC matching of a transflective LCD. Photoalignment technology is used to fabricate the dual‐mode liquid‐crystal cell in the first approach and also the in‐cell retardation film in the second approach. Prototypes of the proposed configurations have been fabricated, which show good performance and a matched TVC/RVC.     

Transflective twisted‐nematic liquid‐crystal display with double twisted‐nematic cell and twisted liquid‐crystal retarder

Abstract— Two configurations, (i) a double‐cell‐gap twisted nematic (DTN) liquid‐crystal display (LCD) and (ii) a single‐cell‐gap twisted‐nematic (TN) liquid‐crystal display (LCD) using a twisted LC retarder, were optimized for transflective liquid‐crystal displays. For the DTN configuration, both the single‐cell‐gap approach and the double‐cell‐gap approach were considered. The optimized configurations exhibit a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. They are easy to fabricate and also possess a perfect dark state. Both are suitable for high‐quality transflective TFT‐LCDs.     

A single‐cell‐gap transflective LCD using active‐level‐shift technology

Abstract— A single‐cell‐gap transflective LCD using active‐level‐shift (ALS) technology has been developed and is presented. An efficient pixel architecture has recently been designed to apply different voltages on transmissive and reflective subpixels through two separated storage capacitors, formed by a boosting electrode and pixel electrodes. A 2.2‐in. vertical‐alignment‐mode (VA) transflective LCD prototype with a similar gamma for both the transmissive and reflective areas was obtained. Compared to a conventional dual‐cell‐gap design, the new single‐cell‐gap design achieves a 17% higher aperture ratio and the contrast increased from 200:1 to 500:1.     

Improved image quality of a high‐transflective tRGB‐t/rW TFT‐LCD

Abstract— This work combines a very simple resolution rescaling method, a well‐known RGB‐to‐YUV converting technique and a detection strategy into an optimized switchable mechanism in order to eliminate the problems of obvious zigzag profiles caused by the special layouts of transflective tRGB‐t/rW TFT‐LCDs and the poor reflective gray‐level contrast ratio effected by the minimum white data in the transmissive RGB‐W + subpixel rendering algorithms. Finally, a transflective tRGB‐t/rW TFT‐LCD is revealed not only to have no visible zigzag profiles and high visibility of reflective gray‐level contrast ratio, but also to have extreme reflectance and transmittance. The excellent optical performance of the proposed system makes it particularly suitable for single‐panel applications that need both high‐transmissive main displays and high‐reflective subdisplays.     

Novel application of ink‐jet‐printing technology in multi‐domain alignment liquid‐crystal displays

Abstract— Based on the drop‐on‐demand characteristics of ink‐jet printing, the multi‐domain alignment liquid‐crystal display (LCD) could be achieved by using patterned polyimide materials. These polyimide ink locations with different alignment procedures could be defined in a single pixel, depending on the designer 's setting. In this paper, we combined the electro‐optical design, polyimide ink formulation, and ink‐jetting technology to demonstrate the application of multi‐domain alignment liquid‐crystal display manufactory. The first one was a multi‐domain vertical‐alignment LCD. After the horizontal alignment material pattern on the vertical alignment film, the viewing angle would reach 150° without compensation film. The second one was a single‐cell‐gap transflective LCD within integrating the horizontal alignment in the transmissive region and hybrid alignment in the reflective one in the same pixel. In addition, this transflective LCD was also demonstrated in the form of a 2.4‐in. 170‐ppi prototype.     

Full‐color transflective cholesteric LCD with image‐enhanced reflector

Abstract— A full‐color bistable transflective cholesteric liquid‐crystal display (Ch‐LCD) was demonstrated by using an imbedded image‐enhanced reflector (IER) on top of each transmissive subpixel. The RGB colors were achieved by patterning conventional color filters on a black‐and‐white Ch‐LCD. In addition, the IER on top of each transmissive subpixel provides similar paths for the transmissive backlight and the reflected ambient light. A simple transflective Ch‐LCD was demonstrated.     

A single‐cell‐gap transflective liquid‐crystal display with special electrodes

Abstract— A single‐cell‐gap transflective liquid‐crystal display with special electrodes was demonstrated. In the transmissive region, a strong longitudinal electric field was generated by decreasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes; while in the reflective region, a weak longitudinal electric field is generated by increasing the distance between the top and bottom transparent indium‐tin‐oxide electrodes. And slit‐patterned electrodes were used to optimize the fringe field at the junction of the transmissive and reflective regions. As a result, both the transmissive and reflective display modes show well‐matched gray scales. The simulated single‐cell‐gap TR‐LCD has good performances.     

Transflective ferroelectric liquid‐crystal display with a single‐cell gap

Abstract— A ferroelectric liquid‐crystal (FLC) display was optimized as a transflective liquid‐crystal display (LCD). In this configuration, the single‐cell‐gap approach was considered. The optimized configuration exhibits a high contrast ratio, wide viewing angles, and achromatic (black/white) switching in both the transmissive and reflective modes. Because no double‐cell‐gap structure, no subpixel separation, and no patterning polarizers and retarders are included in the configuration, the configuration is easy to fabricate and also possess a perfect dark state. This configuration is also suitable for bistable applications.     

Next‐generation mobile LCDs with in‐cell retarders

Abstract— In‐cell retarders can be a major breakthrough for mobile LCDs. When a patterned in‐cell retarder replaces the external retarders on transflective LCDs, brighter and thinner transflective LCDs with lower power consumption and wider viewing angle can be obtained. Additionally, when in‐cell retarders are applied in reflective LCDs, the thickness of the LCD is considerably reduced without affecting the optical performance of the reflective LCD. This paper presents the technology needed to make in‐cell retarders and the performance of reflective and transflective LCDs with in‐cell retarders.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

Transflective TFT‐LCDs with high optical performance

Abstract— In order to reduce panel cost, reduce power consumption, and minimize thickness, a single panel with dual functions for high‐transmissive main displays and high reflective sub‐displays is becoming the trend. Two novel RGB‐W transflective 1.9‐in. a‐Si TFT LCDs have been developed to meet the requirements. By using the traditional seven‐mask dual‐cell‐gap structure, novel transflective tRGB‐t/rW TFT LCD and tRGB‐rW TFT‐LCD panels were fabricated with high transmittance and high reflectance, respectively. The optical clarity is excellent in both dark and bright conditions. Their superior optical performance is attributed to the high‐efficiency “transflective white” subpixel or “reflective white” subpixel.     

Transflective blue‐phase liquid‐crystal display with corrugated electrode structure

Abstract— A transflective polymer‐stabilized blue‐phase liquid‐crystal display (BP‐LCD) with a corrugated electrode structure is proposed. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, two device structures are proposed. The first device structure has the same inclination angles but different cell gaps in the T and R regions. And the second device structure has the same cell gap but different inclination angles in the T and R regions. Both of the device structures can obtain well‐matched VT and VR curves. This display exhibits low operating voltage, high optical efficiency, and a wide viewing angle.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

A novel pixel memory using integrated voltage‐loss‐compensation (VLC) circuit for ultra‐low‐power TFT‐LCDs

Abstract— A novel pixel memory using an integrated voltage‐loss‐compensation (VLC) circuit has been proposed for ultra‐low‐power TFT‐LCDs, which can increase the number of gray‐scale levels for a single subpixel using an analog voltage gray‐scale technique. The new pixel with a VLC circuit is integrated under a small reflective electrode in a high‐transmissive aperture‐ratio (39%) 3.17‐in. HVGA transflective panel by using a standard low‐temperature‐polysilicon process based on 1.5‐μm rules. No additional process steps are required. The VLC circuit in each pixel enables simultaneous refresh with a very small change in voltage, resulting in a two‐orders‐of‐magnitude reduction in circuit power for a 64‐color image display. The advanced transflective TFT‐LCD using the newly proposed pixel can display high‐quality multi‐color images anytime and anywhere, due to its low power consumption and good outdoor readability.     

Energy‐efficient liquid‐crystal displays (e2‐LCDs) using a photonic‐crystal backlight system

Abstract— Cholesteric liquid crystals automatically form one‐dimensional photonic crystals. For a photonic crystal in which light‐emitting moieties are embedded, unique properties such as microcavity effects and simultaneous light emission and light reflection can be expected. Three primary‐color photonic‐crystal films were prepared based on cholesteric liquid crystal in which fluorescent dye is incorporated. Microcavity effects, i.e., emission enhancement and spectrum narrowing, were observed. Two types of demonstration liquid‐crystal displays (LCDs) were fabricated using the prepared photonic‐crystal films in a backlight system. One is an area‐color LCD in which a single photonic‐crystal layer is used for each color pixel and the other is a full‐color TFT‐LCD in which three stacked photonic‐crystal layers are used as light‐conversion layers. The area‐color LCD was excited by using 365‐nm UV light, and the full‐color TFT‐LCD was excited by using 470‐nm blue LED light. Because of the photonic crystal's unique features that allow it to work as light‐emitting and light‐reflecting layers simultaneously, both LCDs demonstrate clear readable images even under strong ambient light, such as direct‐sunlight conditions, under which conventional displays including LCDs and OLED displays cannot demonstrate clear images. In particular, an area‐color LCD, which eliminated color filters, gives clear images under bright ambient light conditions even without backlight illumination. This fact suggests that a backlight system using novel photonic‐crystal layers will be suitable for energy‐efficient LCDs (e²‐LCDs), especially for displays designed for outdoor usage.     

Transflective device with a transparent organic light‐emitting diode and a reflective liquid‐crystal device

Abstract— A high‐transmittance transflective device based on a hybrid structure consisting of a transparent organic light‐emitting diode (OLED) stacked on top of a reflective liquid‐crystal device (RLCD) was conceptually demonstrated. By placing the transparent OLED on top of a vertically aligned LCD operated under normally black mode, a transmittance as high as 75.7% was obtained due to the asymmetric emission characteristics of a transparent OLED. To further improve the performance in the transmissive mode, a polarizer‐free LCD was used, which yielded an ultra‐high transmittance (82.2% overall).     

Advanced IPS technology for mobile applications

Abstract— In‐plane‐switching LCD (IPS‐LCD) technologies originally developed for LCD monitors and TV applications are applied to mobile applications. Advantages of the IPS mode over other optical modes for mobile applications are quantitatively clarified. The panel achieves stable color reproduction and chromaticity in the viewing‐angle range for mobile displays. Superiority of the IPS mode over other optical modes is discussed also from the viewpoints of stability in chromaticity during the brightness change and the driving power consumption. A transflective IPS mode with good performance is accomplished by the use of a proper optical design. A new structure, IPS‐Pro, which enables sunlight readability by increasing the transmittance, i.e., the brightness of the panel, without additional cost and power consumption in contrast to additional fabrication processes required to fabricate the transflective mode is realized. Furthermore, to improve the users' convenience, an automatic luminance control system and a controllable viewing‐angle device are developed. The panels developed fulfill the market requirements of increasing the function and performance variations and will be the most appropriate ones to be applied to mobile appliances, such as cellular phones, digital still cameras, music players, GPS, mobile TV sets, etc.     

Current manufacturing technologies for TFT‐LCDs

Abstract— TFT‐LCD panels for notebook‐PC applications requires a thin and light form factor, low power consumption, and good display quality, whereas the desktop monitor has different requirements such as large panel size, wide viewing angle, high resolution, brightness, etc. However, for the fifth‐generation of mass production, current panel technologies have to improve in order to cope with these requirements. In this article, various approaches to the manufacturing technologies of next‐generation TFT‐LCDs are discussed.     

Liquid‐crystal mixtures having tolane substances for field‐sequential‐color TN‐LCDs

Novel liquid‐crystal (LC) mixtures featuring high optical anisotropy Δn) and small rotational viscosity (γ¹) were developed for field‐sequential‐color TN‐LCD applications. The dynamic behavior of the TN cells in a narrow‐gap range was studied and new tolane LC substances were introduced. The newly developed LC mixtures, having a narrow‐gap cell, enable a TN‐LCD to switch fast enough to be applied to field‐sequential‐color displays not only at a room temperature but also at low temperatures. It was also confirmed that the voltage‐holding ratio (VHR) is sufficiently high in field‐sequential addressing conditions and, therefore, the LC mixtures can be used in active‐matrix LCDs. For practical use, a storage test of the TN cells under light irradiation was performed to evaluate their voltage‐holding property. It was also confirmed that their high VHR can be maintained for over 10,000 hours under practical conditions.