共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
3.
介绍了电除尘器的特点和局限性,以及袋式除尘器的优势。详细介绍了袋式除尘器常用过滤材料芳香族聚酰胺纤维、聚苯硫醚纤维、聚酰亚胺纤维、聚四氟乙烯纤维、芳砜纶的常用牌号、使用性能、应用领域以及和玻璃纤维的结合应用性能。测试了芳纶纤维的过滤性能,简要介绍了芳纶纤维的应用前景等。研究认为,芳纶滤料性价比高,应用优势明显,是水泥、钢铁、有色冶金等领域除尘的理想材料。 相似文献
4.
5.
6.
7.
8.
随着滤筒除尘器的技术发展,已具备普通袋式除尘器的特点,越来越多的应用于水泥行业,特别是覆膜滤料的使用及发展,更大的促进了滤筒除尘器在水泥行业的应用,与普通袋式除尘器相比有一定的优势。 相似文献
9.
10.
11.
针对我国大气污染物的排放特点,袋式除尘是比较合适、运行稳定可靠的一项烟气除尘技术。介绍了过滤材料的分类,袋式除尘过滤材料的结构以及应用于高温腐蚀性烟气过滤中过滤材料的几种纤维性能,重点介绍了高性能聚四氟乙烯纤维在过滤材料中的应用。 相似文献
12.
13.
水泥粉磨系统采用袋收尘技术不应采用旋风筒作预收尘设备;高温条件下的袋收尘技术以降低烟气温度为前提,使用热交换器降温较增湿塔降温好;高温条件下的袋收尘器更应防漏气,确保不发生结露现象;煤磨系统的袋收尘器关键在防燃防爆。为了确保袋收尘器正常运行,应更多地考虑过滤风速、结露与热耗的关系以及系统阻力。 相似文献
14.
Ki Myoung Yun Yasuko Matsubayashi Ferry Iskandar 《Chemical engineering science》2007,62(17):4751-4759
Polyacrylonitrile (PAN) fibers with mean diameters in 270-400 nm range were prepared by electrospinning for use as a filter media. Compared to commercial filters made of polyolefin and glass, the fibers of electrospun filters were more uniform in diameter. The performance of electrospun filters was evaluated by measuring the penetration of monodisperse NaCl nanoparticles (below 80 nm in size) through the filters. It was found that electrospun filters could be made which had nanoparticle penetration values comparable to commercial filters but with substantially less filter mass. The penetration of nanoparticles through the electrospun filter media could be reduced by increasing the filter thickness, which is controlled by the collection time during the electrospinning process. Nanoparticle collection by electrostatic forces was found to be negligible for electrospun filters. Filter quality factors and single fiber collection efficiencies were found to be independent of filter thickness for electrospun filters, and the penetration of nanoparticles through electrospun filters was in better agreement with theoretical predictions than was the measured penetration through a commercial filter. This study shows that electrospinning is a promising technology for the production of high performance nanoparticle filters. 相似文献
15.
芳砜纶在耐高温过滤材料应用中性能的研究 总被引:1,自引:0,他引:1
通过对芳砜纶及芳砜纶滤料主要物化技术指标的试验研究和对比分析,针对耐高温芳砜纶滤料在高温烟气过滤中的应用特性进行了探讨。由试验结果可得,芳砜纶滤料具有突出的耐热性及良好的耐化学腐蚀性能,满足了滤料行业标准中对耐高温及耐腐蚀的专项技术要求,是一种耐250℃高温的新型袋式除尘器用过滤材料。 相似文献
16.
介绍了玻璃纤维与高性能合成纤维的优缺点。根据实际应用领域环境特点和要求,用合理的纤维配比制造复合过滤材料,通过对其制作过程、技术要求、主要产品特性以及在具有代表性行业领域中应用的介绍,为生产和选用提供有益的借鉴与参考。 相似文献
17.
脉冲褶式滤筒是BHA公司开发研制的一种新型过滤技术。该技术选用纺粘纤维滤料作为褶式滤筒的过滤介质,其过速效率高达99.992%。且保持相当低的运行阻力,滤料物理特性坚挺,使用时无需笼架支撑,易于更换安装,使用寿命高于3—5a,其价格性能比优势显著。利用该项技术,可改造振打式脉冲或反吹风式袋式除尘器等,并能获得显著的改造效果。 相似文献
18.
A. H. Bronnsack 《European Journal of Lipid Science and Technology》1978,80(12):473-477
Sieving and Filtration in the Paint Industry II: Filtration with Pine Felt Fine felts are economical and acceptable filter media due to their large filter surface and three dimensional structure. In the form of specially designed SNAP-RING filter bag, the advantages of pine felts can be very well utilized. The most important advantages of filtration using SNAP-RING filter bags in combination with pressure filters are the high capacity, long periods of use, reduction in cost of personnel due to rapid interchangability of the bag, and full utilization of the filtration capacity by the use of pressure. 相似文献
19.
统筹考虑纤维结构特性、纤维排布及纤维层数等因素,基于MATLAB编写控制程序,建立褶型纤维过滤介质微观尺寸模型,并计算过滤介质固体体积分数?,采用数值模拟方法获取微观尺寸下过滤风速v与压力损失Δp之间的数学关联式,进而获取介质的粘性阻力系数C1。在此基础上,建立褶型纤维过滤介质宏观尺寸模型,基于微观尺寸模拟得到的?及C1,采用数值模拟的方法得到宏观尺寸下迎面风速u与Δp之间的数学关联式,并将数学关联式与多个经验公式进行对比。结果表明,褶型纤维过滤介质内纤维排列方式及介质厚度对Δp有影响,但对C1等性质参数影响不大;微观尺寸研究得到的参数可以为宏观尺寸研究提供指导,微观结构与宏观结构性质参数可以沿用。本研究结果对拓展纤维过滤介质的研究方法及优化其结构具有重要理论及实际意义。 相似文献